I can not burn CD when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive.

Original title: I can not burn CD

I can down load soft ware, playing CDs; s & DVD, but when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive. How to fix this?

Hello

1. have you tried using different CD and check?
2. were you able to burn CDs without any problem earlier?
3. have you made changes on the computer before this problem?

The hotfix in the following article might help you.
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/

Tags: Windows

Similar Questions

  • When I insert the CD in the drive for ripping, Windows (Vista) Media Player asks me to insert the CD. It does not recognize that I have already a CD in the drive, it can not extract the CD.

    When I insert the CD in the drive for ripping, Windows (Vista) Media Player asks me to insert the CD. It does not recognize that I have a CD in the drive, it already and can not extract the CD. The air play perfectly to the reader.

    Hello, BGNG,.

    This thread has been created in wrong forum; the Microsoft moderation team has moved this thread on the forums of programs .

  • When I try to start lightroom 6 it opens only the first window, but nothing more. ligthroom closed several times, restarted the computer, update system, nothing. What can I do?, when I try to start lightroom 6 it opens only the first.

    When I try to start lightroom 6 it opens only the first window, but nothing more. ligthroom closed several times, restarted the computer, update system, nothing. What can I do?, when I try to start lightroom 6 it opens only the first.

    Hi silvers.

    Please make sure that your graphics card and Lightroom 6 are up-to-date. Latest version of Lightroom is 6.4.

    Please check the FAQ and troubleshooting of Adobe Lightroom GPU and disable the use of the GPU in Lightroom.

    What is your operating system?

    Kind regards

    Assani

  • When you try to send a file from a Web site, I get a message that doesn't say "none created a profile. Use mail icon in Control Panel.

    When you try to send a file from a Web site, I get a message that doesn't say "none created a profile. Use mail icon in Control Panel.  I searched and can't find this icon.  Can you give me way better?

    You must set up your default email program to send on a Web site.  Go to control panel | Default programs and set your default e-mail program there.  If your e-mail program is web-based, then you probably can't use this feature (sends the Web site file), then you may need to copy the site, and then paste it into a new message and then send it.

    Steve

  • When I try to move a file of premises for the sign from cloud to cloud still negative?

    When I try to move a file of premises for the sign from cloud to cloud still negative?

    Hello

    Please see useful fair questions: where can I find links to management and creative Cloud files synchronization?

    Hope that helps!

    Kind regards

    Sheena

  • Windows Movie Maker, Media Center, DVD Creator, does not recognize that I have an engraver of DVD/CD operation to date.

    I have a Dell with Windows XP Media Edition desk top. I was always able to create movies using Windows Movie Maker and also by Media Edition and burn them to a DVD and a CD even. I can play any CD or DVD in the readers, however, I can't save or burn more. I get error 19 asking me to make sure I have a recorder. Whatever program I am in does not recognize that I have a DVD/CD burner. I have uninstalled and reinstalled software, scanned the players only to discover that they are up-to-date and are working properly. Except that they are not work properly. I have a TSST corp DVD +-RW TS - H553A I do most of my record with. I have been to Fix Windows and he's always broke. Any ideas?

    I have a Dell with Windows XP Media Edition desk top. I was always able to create movies using Windows Movie Maker and also by Media Edition and burn them to a DVD and a CD even. I can play any CD or DVD in the readers, however, I can't save or burn more. I get error 19 asking me to make sure I have a recorder. Whatever program I am in does not recognize that I have a DVD/CD burner. I have uninstalled and reinstalled software, scanned the players only to discover that they are up-to-date and are working properly. Except that they are not work properly. I have a TSST corp DVD +-RW TS - H553A I do most of my record with. I have been to Fix Windows and he's always broke. Any ideas?

    =================================
    It is possible that you have a hardware problem with
    your burner but... the following article might
    be worth a visit:

    (314060) your CD or DVD drive is missing
    or is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/314060/en-us John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - to proceed at your own risk

  • My Xbox does not recognize that I have a gold membership

    I'm trying to do things with my gold membership on my xbox but when I connect, it does not recognize that I have a gold membership, he thinks I still have free membership. When I am connected to xbox.com confirms that I have a gold membership.

    Hello

    If you think that it is a question of the Windows Live ID, please ask in answers
    -H, M and s. (and all things, Windows Live) Forums

    Answers - Hotmail, Messenger, and SkyDrive (and all things Windows
    Sign - in Live) - Microsoft Account (formerly Windows Live ID)- and
    Forums register
    http://answers.Microsoft.com/en-us/windowslive/Forum/LiveID-signin

    Others that the answers above has no influence on the XBox or XBox Live
    If you need to contact them.

    XBox - Support
    http://support.Xbox.com/en-us/pages/default.aspx

    XBox - Contact us (support)
    http://support.Xbox.com/en-us/contact-us

    XBox - Support Forums - and my XBox (top-right)
    http://forums.Xbox.com/

    Xbox technical support phone number

    • Toll-free: (800) 4MY-XBOX or (800) 469-9269

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Dynamic CRM2011 for the outlook client does not recognize that I have already installed SP2

    Dynamic CRM2011 for server (vista 64-bit) or the outlook client does not recognize that I have already installed SP2

    Error log (edited to highlight what appears to be the problem):
    Latest Version of the OS: 6.0.6001
    11:14:06 |   Info |   Service Pack: Service Pack 1
    11:14:06 |   Info |   System type: workstation
    11:14:06 |   Info |   Mask away: 0 x 0300
    11:14:06 |  Error | Failed to install Microsoft Dynamics CRM for Outlook. Install Windows Vista Service Pack 2 and then try again.
    11:14:06 |  Error | System requirements not filled to allow the installer to run.
    My computer works SP2 and all current updates except for:
    • Platform Update for Windows Vista x 64-based Systems (KB971644)
    1. error: 8000ffff
    I ran 'fit' the Microsoft tool, but made no difference. This update is my problem, or I am barking the wrong tree?
    Help, please!

    Hi Paul,.

    The question you posted would be better suited in the Forums of Microsoft Dynamics. I would recommend posting your query in the Forums of Microsoft Dynamics.

    http://social.Microsoft.com/forums/en-us/category/Dynamics

  • I forgot to backup Outlook Express! However, the .dbx files are all in the data folder of Application that I have back up! How can I see what is in them to import to my chosen e-mail program?

    Original title: .dbx files

    I've updated computer laptop of my client from Windows XP to 7.  I forgot to backup Outlook Express!  However, the .dbx files are all in the data folder of Application that I have back up!  How can I see what is in them to import to my chosen e-mail program?

    This is how you would normally import into Windows Live Mail. If all goes well it will give you enough of a jump start.
     
     
     
    Copy the * ENTIRE * OE message store folder to a flash drive. (Folders.dbx must be included). Place it on the desktop or another location on the computer using WLMail.
     

    WLMail 2011/2012: folder button. Import Messages. Microsoft Outlook Express 6, and the point where it was saved.
     
     

     
     
     
     
     
     
     
     
  • My computer does not recognize that I have two monitors connected.

    I have a VGA splitter cable, but even after I used the cord to connect two cords vga to a port, the computer is only noted one of the monitors. So when I go into settings to try to get them to display both, or to identify, the computer notice only a single monitor. So the problem is that my computer does not recognize that there are two put monitors in place.

    Cable splitter separates the single signal only. The computer only sees it as an output. You would need a different video card use the two forms as separate monitors instead of simply split the signal.

  • When I try to go beyond the trial version, it is said that it does not recognize that I have photoshop

    I bought the creative cloud CS6 in 2013 and have since then had few problems of resettlement. I recently bought a new laptop and reinstalled creative cloud. I downloaded photoshop and the trial version has expired, but when I connect to my account it says that I do not have a "Member" (this was a one-time purchase of the student). I tried options on other forum responses to this topic (the test expired link here: Adobe Creative Cloud apps back after 2015 updated CC test mode ), but still does not allow me to continue using it. What should I do?


    I use 10 on your laptop brand new windows which is well able for CS6.

    Cloud of reading takes up https://forums.adobe.com/thread/2089127 for some ideas

  • My windows media player does not recognize that I have a cd/dvd burner installed how do I corredt this?

    I'm trying to burn pictures on a dvd with windows media center and I get a message saying "install a burner and try again. I have a burner and have used it in the past so I don't know what the problem

    Hello

    1. have you made changes on the computer before this problem?
    2. which version of the Windows operating system is installed on your computer?
    3. what version of Windows media center do you currently use?
    4. are you able to use the DVD writer normally with other applications?

    Try the following and see if it helps.

    Method 1:

    Make sure that the CD/DVD burner is properly connected to the computer.
    a. If you are using an external CD/DVD recorder, connect the CD/DVD burner to the computer.
    b. plug in the cabin of the power supply and check if the power light is on.
    c. install the burning software. Insert the CD, a program will pop up and you guide through the installation process. Usually it let you name your drive, tell you when connect you your external CD/DVD burner to your computer via USB, and update the software for your external CD/DVD burner.
    d. check if you are able to burn CD/DVDs.

    Method 2:

    Delete the temporary folder burn Cache and check if it helps.

    Follow the steps below:
    (a) click Start, select computer.
    (b) now go to sub lease:

    File Burn \AppData\Local\Microsoft\Windows\Burn\Temporary C:\Users\ (Username)

    (c) delete the files at the location above.
    (d) restart your computer and check if that helps.

    Method 3:

    Uninstall any third-party CD/DVD burning software installed on your computer and then burn the DVD and check if that helps.
    How to uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

    Method 4:

    Run the fixit for the following Microsoft fixit and if that helps.
    Your CD or DVD drive cannot read or write media: http://support.microsoft.com/mats/cd_dvd_drive_problems/

    Method 5:

    Try to clean boot, and then check to see if this helps you.

    How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135
    Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

    See also: http://windows.microsoft.com/en-us/windows-vista/Burn-a-CD-or-DVD-in-Windows-Media-Center-frequently-asked-questions

  • Error 0 x 80070079 windows 7 x 64 win7 - when you try to copy large files to USB. The semaphore timeout period has expired. Help, please!

    Any file larger and begins to copy and Quen stops about 95 to 98% before its finshed. This is some time and comes back with an error 0 x 80070079: the semaphore timeout period has expired. If I boot in safe mode, I get the same thing. I applied http://support.microsoft.com/kb/976972 and it did not help me. Help, please!

    I have Dell XPS9000, Win7 Premium, x 64, I7/920, Nvidia 260, 12 GB of RAM

    Hello

    Thanks for the reply Thahaseena. I think a lot of people have the same problem and it's partially the fault of Microsoft. It is the solution of the problem that works for most people if the heart of the problem is corrupt USB driver (s). The USB driver might get damaged due to defective USB device. This was my case. I bought the 16 GB Sandisk USB which has serious problems. It seems that it is real default, rather than fake. However, I am still investigating.

    This is what happens:

    -Start the copy of the file and at one point gets stuck. After all, you get that infamous error 0 x 80070079. If you try to shoot this defective USB before the error pops out, it's really dangerous abduction of USB that could cause corruption of the driver for the USB controller. This happened to me. So, after this point, none of the USB devices will be capable of the greatest copy files 1 GB +, because my USB drivers are now corrupt and and the transfer is slower. Fast devices and more small files work great, but if you have low speed USB 2.0 device it will not be able to complete the transfer of files at one time and you will receive the error.

    Solution:

    -Stop using the defective device to avoid a repetition of the problem (if you know who is defective). If you do not know, must be eliminated one by one.

    -Disconnect all USB cables except the keyboard cable (at least that is not based USB)

    -Use tabs and the arrows on the keyboard to get to Device Manager

    -Remove all usb drivers, including the one that is connected to the keyboard

    -You may need to force the closure - the dawn of the computer.

    -Do not turn on computer. Get on your knees and unplug the power cord. If you forget this step, the process of booth PC will load faulty driver again. (faulty or bad it depends on the scenario)

    -By unplugging the power cord and let it stay for at least 5 minutes, you force your PC to renegotiate the devices and drivers

    -Connect all USB cables

    -Check the usb status icon in the status bar. Sometimes, you may need to restart the computer if windows asks you to do. Restart the computer if you are not sure what I'm talking about.

    - and... Here we are. Bingo!

    Now, if you plug the faulty device once again, you will need to repeat the process. However, in my case I return to the seller or the manufacturer for repair. You can use this procedure to force the outcrop of USB drivers. That's why I say I blame partially Microsoft for that matter because there is no utility or command available to force this action automatically do that when the problem occurs. This could potentially help people with the question when a few USB ports stop working if its pilots involved.

    If it worked for you, please press useful Votes.

    Thank you.

    Ntongo

  • When I try to print a file ID PDF transforms the drawing in a worse

    Hello everyone

    My name is Ishmael, and I work with InDesign CS6.
    I am trying to print a document from ID, in which I placed some vector designs for Illustrator (and before that, they come to the Academy). The problem I find, to which I was not able to find a solution, is that when I try to export to interactive PDF my drawing quality diminishes, it s like ID do all lines and its thickness in the he loves the most and my picture becomes a completely different, with a worse quality.

    It's the way my drawing actually looks at a preview of the ID. Exactly as I want to be printed.

    Captura2.JPG

    And that's how ID prints, after that I tried to export the document in PDF format (no matter if I try as an Interactive-PDF, print PDF, or if I try to print with the Adobe PDF printer)

    Captura.JPG

    I was looking hard all over the web, and I have not found any similar explanation on what could pass me.

    Is this someone might know that could be the problem?


    Thank you so much for all those who want to help me

    Best regards

    Ishmael

    How you view the exported PDF file? In the drive? Acrobat? Something else?

    For reliability, it should be Reader or Acrobat and if it's one of those, try this:

    Edit > Preferences > Page Display > (uncheck) improve fine lines (it is enabled by default; it disable)

  • Applications such as Firefox and Pandora, do not recognize that I have updated to v 9.0.1 of Firefox, even though that I have updated to him twice. What can I do for other applications to recognize that I use Firefox 9.0.1?

    I've updated to Firefox 9.0.1 twice. I still get messages from Firefox and Mozilla among others asking me to upgrade to the latest version of Firefox so that my system works. When I do help > about Firefox, it shows that I'm using version 9.0.1. What additional steps are needed for other applications, including Firefox, to recognize that I am using 9.0.1 version?
    Thank you.
    Rory

    Your user agent is corrupted by the Fast Browser Search (FBSMTWB) that identifies you as Firefox/3.5.7

    see your user agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; RV:1.9.1.7) Gecko/20091221 Firefox/3.5.7 FBSMTWB

    reset the user as mha007 above answer agent

    See also these pages and discussions on Fast Browser Search (FBSMTWB in the user agent).

    http://help.fastbrowsersearch.com/

    http://www.pccybertek.com/2009/05/remove-fast-browser-search

    Thank you

Maybe you are looking for