Similar Questions

• Determined that I can spend to 10.6.8 Maverick.  When I update will I still have my existing bookmarks from Chrome and Mac Mail?

  Determine that I can spend to 10.6.8 Maverick. When I update it will save my e-mail file and Chrome bookmarks?

  (A) you should always have a backup (preferably 2) before performing any upgrade.

  (B) OS X upgrades do not delete user data (but things can always go wrong, that's why you should have backups)

  Mavericks C) is no longer available for new downloads.

  If you have already downloaded the Mavericks, so it will be available in your App Store-> purchases.  If you never downloaded Mavericks, then you can download El Capitan for free, or you can buy a code of redemption for Lion 10.7 or 10.8 Cougar of the shop online from Apple.com.

  If you must have the Mavericks, then the other option is to go to the Apple Store and see if they install it for (take you a go-Genius Bar first).

• WARNING: Incompatible Arg. You can't use stack Variables If generating series is not defined

  What does this message mean?

  "WARNING: incompatible Arg. you can't use stack Variables If generating series is undefined."

  Where can I put generate series only?

  Thank you

  Derek

  Hi Derek,.

  Not all LabVIEW C Generator settings are compatible with each other. In this case, you must define generate series only (aka 'disable parallel execution') If you want to generate the code uses the variable stack.

• I have AM5200-E5521A Office. Looking for Council capacity how much I can spend 4 GB.

  I have AM5200-E5521A desktop with windows vista. Looking for Council capacity how much I can spend 4 GB. Not able to find any info on the internet. You want to speed things up. Also, the latest version of windows would allow Accelerator upward.

  Yes exactly. As I wrote, 4x2Gb means 4 slots of 2 GB. Each unit supports up to 2 GB.

  I suggest you to buy the same memory modules. You will find a sticker on the original module. The first ten characters in the bar code is the part number: KN.2G* *. *.

• is that I can spend 5.1.3 to 5.3.3 XR?

  Hello!

  is that I can spend 5.1.3 to 5.3.3 XR?

  I can't find the guide here

  http://www.Cisco.com/Web/Cisco_IOS_XR_Software/index.html

  RP/RSP0/0/CPU0xxx: #sh short version
  03:58:50.624 Thu Feb 18 UTC

  Software IOS Cisco XR, Version 5.1.3 [Default]
  Copyright (c) 2014 by Cisco Systems, Inc.

  ROM: System "bootstrap", Version 2.03(20131022:110718) [ASR9K ROMMON],

  the availability of xxxx is 3 hours 35 minutes
  System image file is "bootflash:disk0/asr9k-os-mbi-5.1.3/0x100000/mbiasr9k-rp.vm".

  Cisco series ASR9K (P4040) processor with K 8388608 bytes of memory.
  P4040 processor 1500 MHz, revision 2.0
  ASR-9001 chassis

  2 Ethernet management
  4 TenGigE
  4 controllers of DWDM
  4 WANPHY controllers
  219 k bytes of non-volatile configuration memory.
  2868M bytes of disk space.
  3915760 k bytes of disk0: (sector size of 512 bytes).

  Node RSP0/0/CPU0 [RP] [CSD: owner]
  Starter: disk0:
  Boot image: /disk0/asr9k-os-mbi-5.1.3/0x100000/mbiasr9k-rp.vm
  Active packages:
  Disk0:asr9k - fpd - px - 5.1.3
  Disk0:asr9k - k9sec-px - 5.1.3
  Disk0:asr9k - mini-px - 5.1.3
  Disk0:asr9k - mpls-px - 5.1.3
  Disk0:asr9k - px - 5.1.3. CSCus71103- 1.0.0

  Node 0/0/CPU0 [LK] [CSD: owner]
  Starter: mem:
  Boot image: /disk0/asr9k-os-mbi-5.1.3/lc/mbiasr9k-lc.vm
  Active packages:
  Disk0:asr9k - mini-px - 5.1.3
  Disk0:asr9k - mpls-px - 5.1.3
  Disk0:asr9k - px - 5.1.3. CSCus71103- 1.0.0

  BR

  Oka

  Yes its not easy when you try to install the wrong TAR :)

  It's crying out to tell you that you're missing the PIE ipsec. Please go ahead and download the k9 tar.

  Eddie.

• Can I use a variable in a slider?

  Version of DB 10g
  Developer SQL 3.
  
  Hi once again, everything
  
  This post is a result of the post previous 'Sequence increment by 2 and not 1.'
  
  Here's a quick run down of what I do.
  We have historical records dating back decades and decades and decades (1900). Some of the most recent data were recorded in the worksheets. With some manipulation of data, it was possible to reorganize the data in its forms of entry in a flat file. These data were then imported into Access database, then using SQL Developer I made a data base for each access database connection and used copy for Oracle... tool to create a table in my flat file schema. In test data that I have right now that I copied the 5 access to Oracle databases and the results are five paintings called plot_84, plot_151 etc. I created a database that contains four main tables where the data from the flat files must be inserted, to standardize the it (I think the sentence is).
  
  I with the help of a large number has been able to train the following anonymous block, and it works very well (with the exception of the question of sequencing).
  
  

  DECLARE get_plot_measurement_id NUMBER;
  update_plot_measurements VARCHAR2(4000);
  get_tree_id NUMBER;
  get_plot_id NUMBER;
  
  BEGIN
      --1. Initiate insert process by getting PK from psp_plots
      SELECT plot_id INTO get_plot_id FROM psp_plots WHERE plot_name = 84; 
      
      --2. Insert records into psp_plot_measurements and keep relationship with psp_plots with variable get_plot_id.
      --   and get primary key value of psp_plot_measurements to insert into psp_tree_measurements during loop process.
      INSERT INTO psp_plot_measurements (plot_id) VALUES (get_plot_id) RETURNING plot_measurement_id INTO get_plot_measurement_id;    
      
      --3. Update record created at point 2.
      UPDATE psp_plot_measurements
         SET measurement_date    = (SELECT DISTINCT measurement_date FROM plot_84)
           , codominant_height   = (SELECT DISTINCT codominant_height FROM plot_84)
           , assessor            = (SELECT DISTINCT assessor FROM plot_84)
       WHERE plot_measurement_id = get_plot_measurement_id
       ; 
    
      --4. Open cursor to insert rows one at a  time and maintain relationships between related tables.
      FOR c1 IN
        (SELECT tree_number 
           FROM plot_84
        )
        
        LOOP      
      
          --5. Insert record into psp_trees
          --   and get primary key value of psp_trees to insert into psp_tree_measurements
          INSERT INTO psp_trees (plot_id, tree_name) VALUES (get_plot_id, c1.tree_number) RETURNING tree_id INTO get_tree_id;
      
          --6. Insert records into psp_tree_measurements and keep relationship with psp_trees with variable get_tree_id.
          INSERT INTO psp_tree_measurements (plot_measurement_id, tree_id) VALUES (get_plot_measurement_id, get_tree_id);
      
        END LOOP;
  
  END;
  /

  But me being someone who loves jobs mind numbing again and again, and more (about 1000 times x, who knows) still wants something I can preload a list of arrays of flat file (5 in this example) and just not run it.
  
  The problem is the following:
  Can I use a variable in a cursor, how are hilighted in bold below.
  
  "BOLD" has not worked is the bit of code FOR c1 IN (SELECT tree_number FROM plot_ | col_name_var) you will see just under point 4 below
  

  DECLARE p_column_num NUMBER;
  col_name_var VARCHAR2(30);
  type number_ptb IS table OF VARCHAR2(4000);
  p_column_nam number_ptb;    
  get_plot_measurement_id NUMBER;
  update_plot_measurements VARCHAR2(4000);
  get_tree_id NUMBER;
  get_plot_id NUMBER;
  
  BEGIN
  
      p_column_num := 5;
      p_column_nam := number_ptb();
      p_column_nam.extend(6);
  
      p_column_nam(1) := 84;
      p_column_nam(2) := 151;
      p_column_nam(3) := 152;      
      p_column_nam(4) := 214;
      p_column_nam(5) := 283;
  
      FOR loop_int IN 1 .. p_column_num
      LOOP
  
        col_name_var := p_column_nam(loop_int);
  
  --1. Initiate insert process by getting PK from psp_plots
        SELECT plot_id INTO get_plot_id FROM psp_plots WHERE plot_name = col_name_var; 
      
  --2. Insert records into psp_plot_measurements and keep relationship with psp_plots with variable get_plot_id.
  --   and get primary key value of psp_plot_measurements to insert into psp_tree_measurements during loop process.
        INSERT INTO psp_plot_measurements (plot_id) VALUES (get_plot_id) RETURNING plot_measurement_id INTO get_plot_measurement_id;    
      
  --3. Update record created at point 2.
        update_plot_measurements := '
        UPDATE psp_plot_measurements
           SET measurement_date    = (SELECT DISTINCT measurement_date FROM plot_' || col_name_var ||')
             , plot_size_10_30cm   = (SELECT DISTINCT plot_size_10_30cm FROM plot_' || col_name_var ||')
             , plot_size_30_50cm   = (SELECT DISTINCT plot_size_30_50cm FROM plot_' || col_name_var ||')
             , plot_size_50cm      = (SELECT DISTINCT plot_size_50cm FROM plot_' || col_name_var ||')
             , codominant_height   = (SELECT DISTINCT codominant_height FROM plot_' || col_name_var ||')
             , assessor            = (SELECT DISTINCT assessor FROM plot_' || col_name_var ||')
         WHERE plot_measurement_id = ' || get_plot_measurement_id
         ;
   
         EXECUTE IMMEDIATE update_plot_measurements;
    
  --4. Open cursor to insert rows one at a  time and maintain relationships between related tables.
        FOR c1 IN (SELECT tree_number FROM plot_|| col_name_var )   
            LOOP      
      
  --5. Insert record into psp_trees
  --   and get primary key value of psp_trees to insert into psp_tree_measurements
              INSERT INTO psp_trees (plot_id, tree_name) VALUES (get_plot_id, c1.tree_number) RETURNING tree_id INTO get_tree_id;
      
  --6. Insert records into psp_tree_measurements and keep relationship with psp_trees with variable get_tree_id.
              INSERT INTO psp_tree_measurements (plot_measurement_id, tree_id) VALUES (get_plot_measurement_id, get_tree_id);
      
            END LOOP;
    END LOOP;
    
  END;
  /

  Reviews on my welcome code.
  
  Ben
  
  Published by: benton on Sep 1, 2011 11:31
  
  Published by: benton on Sep 1, 2011 11:32
  
  Published by: benton on Sep 1, 2011 11:34

  with your current model, you need to write once for each table or write dynamic SQL regardless of the bulk of collect. adding most collect simply means you can do all the inserts in a single step and generally average performance benefits (see docco to COLLECT in BULK and for ALL).

  However, it is not really solve your problem.

  can I suggest an ETL step where you move all of the data in a table, then cross and run this function on all resulting?

• Can I pass a variable (file path) in the Clipboard system windows7?

  Whenever I need to correct an image that I have to download on the net work with an internal application, that I use. I'm using CS5.

  I need to 'stick' the place where the image is in the network (for example z:/abc/user/images/fegvfb.jpg) and I have already a saving code that already has this variable.

  After I recorded the image, I have to go into the system (windows7) where the image is on the network and 'copy' file path and paste it into the application (I use this app)

  Because I managed to deal with hundreds of images every day, I wonder if it is possible to copy to Clipboard th image windows7 course I already as a variable when I save any image.

  If I managed to do it, I can go directly from photoshop to my application (avoiding go to windows system).

  You could do something like that...

  var str = "/z/SS12/Spinnaker.Women_3736/BURBERRY.BRIT/Photo/_v_10151022-BURBERRY. BRIT.3792285.62b.25000.TRENCH.Cotton/Photoshop Retouched/web";
  var Drive = str.substr(1,1);
  str= decodeURI(str).substr(2);
  var cmd = Drive.toUpperCase()+':' +str.replace(/\//g,'\\') + '\\';
  system( "echo " + cmd+ " | clip.exe");
  

• Can I use a variable, all referring to a text field?

  Hello

  I have to settle for some fields readOnly property DYNAMICALLY (I mean, until the moment of execution, I do not know which fields are read-only and which are not?  .

  So I want to replace the TextField1 dynamically with all the fields in the syntax below. So, can we put a variable in the position of TextField1? If so, how can I do that?

  xfa.resolveNode ("VISITOR. Page3.SubFrom1.TextField1') .access = "readOnly";

  xfa.resolveNode ("VISITOR. Page3.SubFrom1. MyVariableComesHere') .access = 'readOnly ';

  How can I put the variable in the Red position?

  In details:

  I have 5 fields, then I want to readOnly, then I hv to write as below,

  xfa.resolveNode ("VISITOR. Page3.SubFrom1.TextField1') .access = "readOnly";

  xfa.resolveNode ("VISITOR. Page3.SubFrom1.TextField2') .access = "readOnly";

  xfa.resolveNode ("VISITOR. Page3.SubFrom1.TextField3') .access = "readOnly";

  xfa.resolveNode ("VISITOR. Page3.SubFrom1.TextField4') .access = "readOnly";

  xfa.resolveNode ("VISITOR. Page3.SubFrom1.TextField5') .access = "readOnly";

  In fact, my requirement is differnent (I know at run time only... Wht wht fields I hv to set readOnly and wht wht fields should allow very good for entry), for this reason I want to use a VARIABLE in the 'position' of TextField1, TextField2... as bleow

  $myvariable var

  $myvariable = TextField1

  Closure of the TABLE

  xfa.resolveNode ("VISITOR. Page3.SubFrom1. myVariable') .access = 'readOnly ';

  Pls. Let me know I can sue a variable like this? If so, what is the correct syntax (pls.  Suggest me a free code to SYNTAX error, bcz am very very beginner to this)

  Thank you

  Thank you

  You can use the following...

  $myvariable var

  $myvariable = TextField1

  xfa.resolveNode ("VISITOR. (Page3.SubFrom1.' + myVariable + "") .access = "readOnly";

  Thank you

  Srini

• How can I add session variables for the subject field and the body of the e-mail Message?

  How can I add session variables for the subject field and the body of the e-mail Message? Tried several combinations, but do not seem to correct the syntax.

  This is the code I have. I need to change all the form variables in $msg in session variables. The $to part is supported. What remains are the $subject and $msg fields.

  $à = « à : ». $_SESSION ["toemail"];
  $subject = '$firstname $lastname, your registration details ';
  $from = "from: [email protected]"; "
  $msg = "Dear $title $firstname $lastname\r\n\nThank for the registration for the design of your dream Home.\r\nWe have received this following details details of you-\r\n\nClient-\r\n\nOccupation: $occupation \r\nPhone No.: $phone \r\nE-mail: $email\r\n\nPresent $ location: \r\n location\r\n\nPresent address: \r\n$ address\r\n\n\nFollowing are specified by you - design requirements \r\n\nBasic Features\r\n\nNo." floors: $floors\r\nNo. of bedrooms: bedrooms\r\nNo of $. of bathrooms: $bathrooms\r\nFloor region: $sqft\r\n\nFurther Suggestions: $ Plan\r\n\nSplit one further\r\n\n\nType floor: $splitfloor\r\n-remarks: $splitfloorremarks\r\nOpen floor: $openfloor\r\n-remarks: $openfloorremarks\r\n\n\nList of the rooms to be Included\r\n\nFoyer: $foyer\r\n-remarks: $foyerremarks\r\nDrawing: $drawing\r\n-remarks: $ alive drawingremarks\r\nFormal: $formalliving\r\n-comments : $ alive formallivingremarks\r\nFamily: $familyliving\r\n-remarks: $familylivingremarks\r\nHome Office: $homeoffice\r\n-remarks: $homeofficeremarks\r\nDining: $dining\r\n-remarks: $diningremarks\r\nMaster room: $master\r\n-remarks: $masterremarks\r\nMaster bathroom: $masterbath\r\n-remarks: $masterbathremarks\r\nMaster Dressing: $masterdress\r\n-remarks: $masterdressremarks\r\nBedroom: $bed\r\n-remarks: $bedremarks\r\nBathroom: $bath\r\n-remarks: $bathremarks\r\nDress: $dress\r\n-comments : $dressremarks\r\nStudy: $study\r\n-remarks: $studyremarks\r\nLibrary: $library\r\n-remarks: $libraryremarks\r\nPowder room: $powder\r\n-remarks: $powderremarks\r\nPrayer room: $prayer\r\n-remarks: $prayerremarks\r\nKitchen: $kitchen\r\n-remarks: $kitchenremarks\r\nPantry: $pantry\r\n-remarks: $pantryremarks\r\nUtility/area of work: $utility\r\n-remarks: $utilityremarks\r\nBalcony: $balcony\r\n-remarks: $balconyremarks\r\nStore: $store\r\n-remarks: $storeremarks\r\nLaundry : $laundry\r\n-remarks: $laundryremarks\r\nVeranda: $veranda\r\n-remarks: $verandaremarks\r\nCar porch: $carporch\r\n-remarks: $carporchremarks\r\nGarage: $garage\r\n-remarks: Theater garageremarks\r\nHome $: $theater\r\n-remarks: room of $theaterremarks\r\nMaid: $maid\r\n-remarks: $maidremarks\r\n\nOther general remarks: $general\r\n\nPlease note that the fields have been left blank in your form will be considered undecided details and used in discretion.\r\nIf of the architect , it better to add more later, design requirements please feel free to reply to this email with the details. « ;
  $fla = mail ($to, $subject, $msg, $from);

  Thanks in advance!

  askintrades wrote:

  How can I add session variables for the subject field and the body of the e-mail Message?

  What you want to do? Given the nature of your question, it seems that you probably don't know what a session variable is used. The PHP manual describes the purpose of sessions here: http://docs.php.net/manual/en/intro.session.php.

  I need to change all the form variables in $msg in session variables. The $to part is supported. What remains are the $subject and $msg fields.

  $à = « à : ». $_SESSION ["toemail"];

  Why do you need to change the form variables in session variables? They are already stored in session variables, or they come directly from the form?

  The $to part is not supported. When you pass $to to the mail() function, it should contain only an e-mail address, not a string that begins with "to:

• A field of process can access a form variable?

  A process (orchestration, workflow,...) can access a form variable?  I am not referring to a field, but a form variable, the variable type that is created when you select properties of the file form (tab Variables).

  Thank you

  Elaine

  No... .to you put the value of the variable in a hidden field so you can extract it out of the XML code that is presented to him.

  Paul

• Can someone please explain Variables in OBIEE (clearly)

  Can anyone of you experts explain it please *.
  
  Repository Variables *.
  (i) static? ***
  (II) dynamic? ***
  
  Session variable *.
  (i) system? ***
  (II) system? ***
  
  and where do I create variable presentation? What is the difference between session, repository, the presentation and the query variable in the responses and OBIEE guest? ***

  Hello

  Its too hard to explain in a post. You can learn about the variables session and repository via the link below

  http://St-curriculum.Oracle.com/OBE/FMW/bi/BIEE/r1013/bi_admin/biadmin.html#T7

  Learn about variable presentation and quick dashboard see link below
  http://St-curriculum.Oracle.com/OBE/FMW/bi/BIEE/r1013/saw/saw.html#T8

  To learn more about the query variable

  http://everythingoracle.com/obieerv.htm

  You will get all the basic knowledge of the variables on this link. If you have a specific question then you can put it here on OTN.

  Thank you
  Sandeep

• can we use repository variables in bi publisher as in answers

  can we use repository variables in bi publisher as in answers
  
  If possible, how

  Yes,

  but you should use Oracle BIEE as data source in order to use the variable in the repository

  you will need to follow the following syntax: valueof ("variable")

• Can I use a variable of environment inside a *.sql file?

  Hello
  
  I want to create an external table.
  Then I use the command
  create or replace directory abc as "C:\folder"... within a sql file.
  
  Now, I want "C:\folder" way to be dynamic I use this path in many other places also inside the sql file. So I thought to create an environment variable and set this value. I tried using like %Path% but it gives error... where % PATH%=C:\folder.
  Can I use a variable of environment inside a *.sql file?
  But how to do it or is there another way.
  
  
  Thank you
  Olivier
  
  Published by: user11018268 on February 19, 2010 01:03

  You can use a variable substitution:

  SQL> accept basedir prompt "input the base dir:  "
  input the base dir:  c:\exp
  SQL> create or replace directory exp as '&basedir';
  old   1: create or replace directory exp as '&basedir'
  new   1: create or replace directory exp as 'c:\exp'
  
  Directory created.
  
  SQL> create or replace directory exp_data as '&basedir\data';
  old   1: create or replace directory exp_data as '&basedir\data'
  new   1: create or replace directory exp_data as 'c:\exp\data'
  
  Directory created.
  
  SQL> create or replace directory exp_log as '&basedir\log';
  old   1: create or replace directory exp_log as '&basedir\log'
  new   1: create or replace directory exp_log as 'c:\exp\log'
  
  Directory created.
  
  SQL> select DIRECTORY_NAME, DIRECTORY_PATH
    2  from dba_directories;
  
  DIRECTORY_NAME                 DIRECTORY_PATH
  ------------------------------ ------------------------------
  EXP_LOG                        c:\exp\log
  EXP                            c:\exp
  EXP_DATA                       c:\exp\data
  

  Max
  http://oracleitalia.WordPress.com

• What is the difference between variable presentation and application of OBIEE 11 g

  What is the difference between variable presentation and application of OBIEE 11 g

  Hello

  presentation and application of variable responses only but fluctuating demand can temporarily ignore the presentation and the session variable has nothing to do with the variables of repository.

  Everything what Oracle

  Thank you

  Prasanna

• variables of the application sites. CFC

  I opted to use application.cfc not so long ago. One thing I struggled with that is how to set the variables that I use on my site pages like I used to do in application.cfm. I have a few passowrds for sftp services etc that I used to set in application.cfm. I was not able to understand how to make them grow with application.cfc so I can call when I need to.

  I tried setting in onrequeststart, SystemFramework etc but nothing seems to work. Variables are never defined.

  Someone at - it an example showing how to define variables that can be used on your site in the world?

  Is there a better way to store passwords and variables such as the one that I'm missing?

  For security reasons, I would try to avoid incorporating the password anywhere in your ColdFusion code.  You can put in a file 'config' outside the Web root, then use ColdFusion to read in a well defined range variable.  Assuming that you do not have or WriteDump() your variable brought anywhere in your production code and that you do not have "Enable request Debugging Output" activated on your production server, you can store the password in the scope or scope of variables a page space.  If there is only one page that will make the FTP communication, then to load the password in a variable on this page would be perfect.  If you modularize the FTP commands, so it can be reused elsewhere in your application, then put the password in a variable in the application scope.

  Since you will need to pass a password for the FTP connection, you cannot have the hash for more security, which is the best way to manage passwords.  But you can encrypt/disable-encrypt using various features in ColdFusion.  I would consider storage at least in a form that is encrypted in the "config."  Although don't no where near perfect security, it is better to store the password in plain text in a file.

  -Carl V.