I can't access my saved connections

Similar Questions

• Standard user (guest) account can not access my wifi connection

  Original title: I installed ie9 on my administers ACCT. and she sails very well, but now the standard (guest) user account cannot access my wifi connection. How can I get the hanging guest account?

  Windows vista 32 bit

  Hello

  You get the error message? If Yes, what is the full and exact error message?

  Method 1:

  Try to run the troubleshooter and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I suggest you to refer to the article and check if it helps.

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Method 3:

  I suggest to disable the antivirus software and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

• MacBook can not access 1300 HP connected to my local network, help?

  I have a HP LaserJet 1300 connected via a USB hub to a Macintosh G5 tower which is connected by Ethernet to my Telus Optik V1000H Actiontec modem/router. I read (I think on this forum) that some people have kept the modem Gateway 2 son they used before the upgrade of their service internet of Telus Optik and plugged into the router/modem Actiontec V1000H because he has better wireless capabilities. I did too, but now I don't know what modem/router my MacBook can access my network through now (if this is important).

  My new MacBook Pro running OS 10.8.2 accessing my wireless network but cannot access the HP LaserJet 1300. I downloaded and installed the v.2.11 driver of HP on the new MacBook, but when I try to set up the HP LaserJet 1300, I get the error message "Unable to download the software from the server at this time." The MacBook doesn't seem to know that I have already installed the printer driver v.2.11 on it.

  I tried to provide much information as possible here, but the line the bottom is I realized that my new MacBook Pro would be able to print to my HP LaserJet 1300 while the printer is connected to my network... but it can't. Can someone help me? I can't really afford a new printer.

  BTW - after reading some of the messages, I realize I can't have fax capability via my network, but is not serious. I've never used fax anyway.

  I'd appreciate it if someone could help me with some advice or point me to another conversation that could help me. Thank you!

  Hi, I am answering my own question so I can mark it as resolved. I continued to read and try different things, and finally (kind of by chance) I solved my problem. I'm not entirely sure how I did it, but I'll try to explain in case someone else is having similar problems.

  I downloaded the driver for printer HP 1300 (v.2.11) manually at least twice. I got it on the MacBook Pro, but the computer doesn't seem to be able to access it when I had not the 1300 HP directly connected via USB. It was confusing to me, especially when all the literature said to do a software update, if I was in trouble by doing the work of the printer.

  When I went to my printer preferences and tried to set up the HP 1300 with the printer not connected not directly to the MacBook Pro, it came as a printer, but I got a message saying that I couldn't download the software needed at this time there. I left this printer icon on my list of printers. (I knew that I already had the software but couldn't get the printer preferences to realize it is there).

  Then, I connected the HP 1300 directly on the MacBook via USB and the process repeated. This time a HP LaserJet 1300 @ my network was created in my list of printer and print driver was on the MacBook Pro. I chose the HP LaserJet 1300 @ my network version as my default printer. I have connected the printer to my network and was able to print wireless from the MacBook.

  I'll just let the other HP LaserJet 1300 icon on my list of printers in the case removing a problem. I don't know if I need it or not.

  Sorry if my explanation is poor. It would be a miracle if it helped anyone. I'm not very good in this stuff. I got lucky!

• I can't access to my connection wirelessly through my router guard saying security key incompatibility?

  my router: Netgear Wireless G Router WGR614v9

  ive tried reseting the router spirit a pen at the back, but always says key shift now no wat to do
  hope someone No. wat to do

  As long as you have not changed the administrative password on the actual router, not the wireless password, this problem has a solution. What you need to do is to connect your computer to your router via an ethernet cable. Make sure that your LAN connection is enabled. After connection, open IE or whatever browser your prefer. Log on to your router using the IP address in the URL "192.168.0.1" line By default, administrative logon information are ID: "admin" and password: "password". From there, you have access to options to change your wireless security settings.

• Can I access work saved on my computer from another account of Illustrator if sign up for a new account?

  My son saved my computer work, but used his own e-mail address.  He don't remember his password to email address is outside of Canada and do not have access to the internet.  If me my own account on Illustrator, I'll be able to pull up the work that he has saved on my computer?

  Yes, you will be able to open all files saved by him. But you cannot access its heritage creative cloud associated with its ID as: Type kit Fonts, swatches, Design active library etc.

  Kind regards

  Rambour

• I can't access some files because I did not 'Privileges '. How do I get and access?

  I had my hard drive crash. I inserted a new disc. I'm now trying to re - load my data files to an external hard drive where I do my backups. When I copy a file and try to access it, I learned that I do not haave access privileges. How can I access?

  1. Connect to the new machine with an administrator account.
  2. In Explorer, right-click on the drive and select "Properties".
  3. Select the security"" tab.
  4. Click on the "Edit" button below the list of the "group or user names.
  5. When Windows asks you "Windows needs your permission...". ', select 'continue '.
  6. Click the 'Add' button to add a new user.
  7. Type "Everyone" (without the quotes) in the box provided and click on "check names".
  8. Click OK.
  9. Now, select 'All' in the list in the "group or user names.
  10. Click on the 'Total control' box in the column "Allow", then click OK.
  11. It may take some time to complete.

  Otherwise, as an administrator, you can take ownership of all files and then transfer them and then to restore the permissions to the appropriate users once transfer complete.  I will describe these procedures in more detail if you need it - but procedures are doing a better job than I ever could.  Here are the procedures: http://www.nirmaltv.com/2008/07/11/how-to-take-ownership-of-files-and-folders-in-vista/.  But this process will make you the owner of all files and you will not be able to transfer the property to standard users (since they don't have sufficient privileges to appropriate).

  You should now be able to access the files and restore the backup (regardless of the method chosen).

  Once the files are restored, you may need to change the permissions so that all the user is not allowed to all files and the administrator is not the owner (I don't know if cela transfers, but I think that it doesn't).  You must configure the permissions as they were before--with each user with rights to its records, all deleted user and administrators with all rights for each folder (or you can skip this last part, because you can always get permissions if you need by taking possession and maybe users want that privacy for their files even administrators).

  Good luck and I hope this helps.

  Lorien - a - MCSE/MCSA/network + / A +.

• My phone does not light and I need pictures that are saved to this topic. I can't access it using the computer what can I do?

  My phone is a Nokia N95 and he simply ceased to work recently, no idea why, but I have important pictures saved on the phone that I can't access because of the phone is not not on computer do not recognize the connection. Is there a way I can get these pics off my phone? I am really in need here and just reach out for information or ideas anyone may have regarding my dilemma.

  Hi cindyheeremans,

  Unless your phone is turned ON, you will not be able to access photos from the phone. I suggest you to contact Nokia for more support.

• I can't access my iMac, is locked and the keyboard will not connect. Magic mouse works OK. What should I do?

  Hello, how can I access my iMac that is locked and the keyboard will not match (new batteries and LED is blinckin). The Magic Mouse works OK. What should I do?

  Buy or borrow a USB keyboard and connect you with that. Once logged in go to your bluetooth preferences and pair it with the keyboard.

• Can I access wifi via my cell connection on my iPhone 6 if there is no available wireless system? My husband Samsung cell phone can access wifi via cellular connection.

  Can I access wifi via my iPhone 6 s cellular system? My husband Samsung cell phone can do that when no wifi system is obvious.

  I need to change the above question. How can I connect Internet through my cell system if no wifi is available? Thank you.

• I can't access my hotmail account or book a hotel since the upgrade to 3.6.8. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings for

  I can't access my hotmail account among some other sites since the upgrade to 3.6.8 on my macbook. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings to make sure they are correct. Contact your network administrator to make sure that the proxy server is running. "I can not even find the proxy settings more.

  Windows: Tools > Options > advanced > network > settings
  OSX: Firefox > Preferences > advanced > network > settings
  Linux: edition > Preferences > advanced > network > settings
  Set your settings to connect to the 'No proxy', if you are not using a proxy.

  Firefox 3.6.6 added a new preference for connection settings, use proxy Panel"system settings", and the default value is the point. " This new preference does not affect most users, because they probably do not have a proxy set in place in their operating system. Therefore, most users should use the setting "no proxy".

• How can I delete someone connected to my computer and using their microsoft acct and became an administrator using their account. I can't access my microsoft account now.

  My son connected to my computer and access his account of Microsoft in doing this, he became my Microsoft account manager.  I can't access my account now, how can I remove it from my computer and come back to me as my Microsoft account manager?

  You will need your son to get a one-time password, then go to settings / accounts, then choose "connect without a Microsoft account" to break the link from his Ms Account.

• I can't access my e-mail account (hotmail) like maintaining ping message could not connect.

  : I hope you can help I can't access my e-mail account (hotmail) like maintaining ping message could not connect.

  When I look for details, he said "p/s server has changed.  Input new password.  As I count years I don't remember the password.  It started a month ago and my Tablet and phone keeps ping this message constantly.   How do I 1. Change the server and 2. The password.

  Thanks Maura

  Hi Maura,

  Welcome to the Microsoft community.

  The community of Outlook.com is a good place to find answers to many of your questions how do and get advice from other users and members of the community.  However, questions about your Microsoft account are not best dealt with in a public forum because of the personal information at issue.   Click here to learn more about how to get help with your Microsoft account: where to get additional support for my account and information questions?

  I hope this helps. Let us know if you need more assistance.

• my computer is the connection with a temporary profile and I can't access some files how to fix this?

  my computer is the signature with a temporary profile and I can't access any of my files how to fix this?

  Hello

  Please post in the forums for your version of Windows.

  Ask a question in a select Technical Forum here appropriate injector:

  Microsoft Community - Forums
  http://answers.Microsoft.com/en-us

  Please provide all the information we need to help us help you.

  How to ask a question
  http://support.Microsoft.com/kb/555375

  =================================

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
  Safe Mode account has no default password (so unless someone changed
  the password should be available).

  Some programs such as the Google Updater (if you've added the Google toolbar,
  Chrome or Google Earth) has been known to cause this problem.

  Error message when you log on to a Windows Vista-based or Windows 7
  computer by using a temporary profile: "the user profile Service has no logon.
  Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "the user profile Service has no logon. Could not load user profile. "in
  Vista & Windows 7.
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  ----------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 - free methods system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ----------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ---------------------------------------------------------------------------------------------------------

  If you can't access your old account you can still use an Admin to migrate to one
  new (remember to always leave an account Admin who is not used except)
  to test and difficulty).

  Difficulty to a Vista - corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Difficulty to a corrupt user - Windows 7 profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When I click on properties in my tab of connection area I can't access the properties settings.

  Connection impossible access area properties

  When I click on properties in my tab of connection area I can't access the properties settings. I need to change the settings of ip address of my connection to the local network on my laptop

  Hello fazlurslemming,
  1. may I know why you must change the setting of IP address on your laptop?
  2. are you able to connect to the internet?
  3. what version of windows are you using?

  Visit the below link to find the steps to change the IP address on a windows 7 installed system:
  http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings
  Post back with the State.

• I can't access internet wirelessly from my laptop because I installed a new printer which is now connected to my router, is - it related somehow?

  I can't access internet wirelessly from my laptop because I installed a new printer which is now connected to my router, is - it related somehow?

  Hello

  1. what happens when you use a wired connection?

  2. how many devices are connected to the router?

  This can happen if you connect that a specific number of device to the router, and when it exceeds the limit. You can consult the router's manual or contact the manufacturer of the router to check if all the parameters must be changed to connect several devices.

   

  Hope this information is useful.