I can't create a new tab, help?

Similar Questions

• All of a sudden, I can't create a new tab. The button is there, but when I click on it nothing happens. Firefox running 30.0

  I only have the tab open but still impossible to create a new tab by clicking on the button "open a new tab. If I'm at a Web site and right-click, I can tell the page to open in a new tab. But I can't get the new tab button to work. It will also not work Ctrl-T

  Inform your employer about this problem. The developer will have to address this add-on attachment.

• Version 5.0 on a MAC doesn't let me switch between tabs. Can I open a new tab, but when I try to go in a different tab, it shows me just the content of the tab opened most recently. Help!

  Version 5.0 on a MAC doesn't let me switch between tabs. Can I open a new tab, but when I try to go in a different tab, it shows me just the content of the tab opened most recently. Help!

  In addition, pop up blocker works for a while and then stops working. I have to close and restart Firefox to make it work again. Help!

  I had the same problem, but with Firefox 4.0. My first thought was last updated to Firefox (after of course restarting FF), but it did not help and I had the same problem.

  Among others, I had an extension installed and enabled called tile tabs 4.10 I thought could easily create this problem. I went in my Add-ons Manager and disabled, restarted Firefox and tabs worked properly again. Unfortunately, the extension of the tile tabs is my favorite Firefox Add-on and I use it almost every day to manage my web tasks. I went to the page Add on for tile tabs and saw that there was a notice that version 4.10 did not work properly on Mac OS and install version 4.9 of the extension. I saw that they had a new is not-yet-seen version 4.11 who has tackled the problem of Mac OS, installed, and everything seems to work properly.

  I have no idea why all of a sudden I had this problem as I don't had not updated Firefox or the extension of the tile tabs recently. Also, obviously this could not solve your problem, especially if you have the module installed and active. But our problem started at the same time for both of us it seems based on your post time, so its probably not a coincidence.

  But its worth a quick glance and you can check other extensions if you don't have the legs of tile that might be the cause of the problem.

• Can I specify a Web Page to open (for example, a Home Page) when I create a new tab?

  When I create a new tab, I get a blank page. I would like to that the starting-out tab with a homepage that I specify - similar to the option for each instance of Firefox you start Firefox.

  You can do it with an add-on like new tab homepage or NewTabURL.

• How can I create a new Style that can be applied to an object?

  To the active menu there is a tab called "Styles".  My question is how can I create a new Style that I can apply to an object?  A link to a tutorial or something like that would be helpful, because I can't find anything!    Thanks in advance for helping me eliminate this frustration!

  KomputerMan.com wrote:

  What I want to do is create a style library, which are basically photos of different Woods.

  There are two approaches you can try.

  Clipping paths

  1. draw the shape of the part as a closed path.

  2 position the wood grain image above or below the shape where you want it positioned.

  3. cut

  4. Select the closed path.

  5. glue on the inside.

  See: Using FreeHand MX > content > work with objects > working with clipping paths

  Fillings in mosaic

  1. use the autotrace to vectorize the image of wood fiber, using many colors.

  Using FreeHand MX > content > work of imported using the > Tracing bitmaps > image vectorization

  2. the group the paths (but not the picture) and create a tiled fill,

  Using FreeHand MX > content > using contours and funding > applying attributes in fillings > Using tiles fill attributes

  3 make a style of a filled object tile

  4. apply the style to other objects.

  Judy Arndt

• I can't create a new project of film since 10.1.2 update.

  I can't create a new project of film since 10.1.2 update. The 'Project' tab if I select "new project_film", nothing happens. Creating a factory trailer...

  Update: it works with a separate administrator account and iMovie another Instance: s any idea, what could be the problem. New Installation has not fixed it... :-( Anyone know a few things to check or change?

  THX!

• Double click on the arrow to the left on the tab bar creates a new tab at the end of the right hand.

  With Firefox 29.0.1 by double clicking on the arrows on the right in the tab bar or the left creates a new tab at the end of the right hand of the tab bar. It is embarrassing behavior that violates standards around UI design click and double-click. A double-click should extend the behavior of the single click rather than do something completely different (opening a new tab). An example would be, in a Word, a single click selects a Word, double click selects the sentence and a triple click selects the paragraph. Note that this is a separate issue from double click the tab bar itself to create a new tab.

  When there are more tabs on the tabs in the window toolbar, that highlight the tabs on the side will not hold show tab in use. I can click on the left and right arrows at the end of the tab bar to scroll the bar in this sense to bring a tab I want to select in the display. I believe that the double click on the arrow to the left would scroll the bar completely to the right, exposing the tab on the left Double click on the right arrow would scroll the bar left entirely exposing the rightmost tab.

  It is a logical extension and expected behavior of single click. Single click - scroll once (seems to be the value of the tab in three), double-click on - scroll all the way.

  For now, if I want to access the tab on the left, I have to click the arrow slowly and carefully until I get to it. I used only one quick click on the arrow to the left until that shponkah stop scrolling without having to count how many clicks. It is possible that my simple quick clicks were actually double-click. However, the bar tabs would stop scrolling when it reaches the end.

  Now, the behavior is really annoying and unexpected. Double click on left dead entirely right tabs completely left arrow and creates a new tab at the end of the right hand. Ditto the arrow right in the opposite direction.

  While I can (maybe) see that the value of a double click on the tab bar itself to create a new tab, double click on one of the scroll arrows should show a new tab.

  Double click on the arrows of the tab should scroll the tab fully for this purpose bar. If the tab bar is already entirely Scrolls towards ending extra clicks (single, double and triple...) should be ignored.

  I like the idea of opening a new tab to the right of the one that has the focus. This should be an option of the contextual right click menu.

  That should not occur if you click the scroll buttons in the tab bar.
  A double-click should act as page up/down and move a full screen and a triple click should move to the left (first tab) or the right (last) until now tab.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• I can't get a new tab to open it by clicking on the + tab

  I can not open a new tab by clicking on the sign in Firefox +. This feature works in Chrome and IE.
  I uninstalled and reinstalled Firefox.
  I did all the updates that are available.
  I did a reboot x 2.
  CTRL T will open a new tab not either; However, I can do a search for something and right click to open in a new tab.
  I frequently use the tabs and really not miss them.

  Help!

  Hello stefbrooks, you can try to reproduce this behavior when you start firefox in safe mode, once? If not, maybe an addon intrudes here (watch out for those related tab in particular)...

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• How can I open a new tab to a previous tab

  I got things set up so when I opened a tab there should be a "+" on the side of the right hand in a little box that you can click to open a new empty tab. This gave you the ability to use your bookmarks in the new tab. I don't have it. I don't know if I changed somehow to a toolbar that is different or not. I also want to make the edges of the more opaque window to see the toolbar. Can help you with this?

  You can open links in a new tab with middle-click or a Ctrl + left click.
  
  You can open a new tab with a double click on an empty space on the toolbar via Firefox Firefox menu or tabs > new tab (Ctrl + T)

  You can find the button new tab showing as a '+' on the tab bar.
  
  You can open the window customize and drag the button new tab that indicates that a sign plus bar tabs on another toolbar and it will become a regular tools like the new button bar button tab you have in versions of Firefox 3.
  
  If you can not find the new button tab then click the button 'Restore Default Set' in the window customize.
  
  If you would like the button tab at the right end of the tab bar, then place a flexible space to the left of it.

• Can I create a new XP Cd if I still have the CD - Key?

  Some time ago I lost my CD of instalation of Windows XP, and now I need to reinstall windows. Can I create a new CD that I can install Windows off if I still Code of the CD authentication or should I buy another? And if I can create an other someone could advice me how?

  If it helps it has a cd of Windows xp with service pack 3.

  No you can't recreate.
  If you have the key and proof of purchase (if a retail version) you can get filtering alternatives of Ms.
  If its an oem version, you should ask the manufacturer of PC

• All the elements menu of AE are low and I can't create a new project.

  The project window is supposed to be some upward when I start AE, but it's not. All the elements menu of AE are low and I can't create a new project. I am a new user of AE and confused. Can you help me? Thank you!

  You launched the render node and not the full version of the software.

• I want to install adobe Flash player, I don't know my password. How can I create a new or retrieve the original?

  I want to install adobe Flash player, I don't know my password. How can I create a new or retrieve the original?

  When you (or someone) first put on your computer, you (or someone) had to choose a password. This protects your computer, and you need to install most software or change the system. We cannot help you if you forget it, sorry.

• How can I create a new folder in Thunderbird

  How can I create a new folder in Thunderbird

  Right-click on the parent folder, a new folder option appears in the menu

• Where can I find the new tab controls, not wheel

  I can't change the new tab to display the tiles.

  You can watch the pref browser.newtab.url the topic: config page and set this pref to the URL of your preferred the new tab page.
  You can use these special pages or set the pref to the URL of your preferred the new tab page.

  • the new default tab with the tiles page is on: newtab
  • the default homepage is Subject: Home
  • to a blank page, you can use Subject: vacuum

  The pref browser.newtabpage.enabled must be set to true to use the page defined through browser.newtab.url like the new tab page.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved

• Shortcuts mouse to "Open the link in a new tab" help "Middle-click on the link" does not work on 10.0.1

  Shortcut of mouse to "Open the link in a new tab" help "Middle-click on the link" does not work on 10.0.1, it worked on version 9.0.1.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes