I can't find listed in all telephone services.

Similar Questions

• I can't find Windows Defender under my services for my computer laptop windows 7.

  * Original title: Windows Defender

  I can't find Windows Defender under my services for my computer laptop windows 7.

  (Moved to repair and recovery)

  Hello

  Windows Defender on Windows 7 is only antispyware. It has disabled (to avoid potential conflicts) during the installation of various programs of anti-malware to include (but not necessarily limited to) AVG, McAfee, MSE and Norton.

  So, probably your antivirus product has disabled Windows Defender. If so, you should not try to turn on WD.

  See you soon,.

  J

• Where can I find list of pins for connectors 68 pins on the SMU-8430/8 and the SMU-8431/8

  We need to build new cables for the SMU-8430/8 and 8431/8 interface cards series.

  I can't find pinout information or other connectors 68-pin on the front of these cards.

  Can someone point me in the right direction to find this information.  Thank you.

  The design of the system requires new cables we don't need a list of the pins.

  After a few more watching on the web site of NOR, I found the information I need here:

  http://digital.NI.com/manuals.nsf/WebSearch/F5A76AD1B0C3B1FE86257B59006A9EAD

  Thanks for the reply.

• None of my work.imtrying of tools windows vista to restore my comp.to than its original state, but I can't find to open all the tools like system restore, disk cleanup, difragment, etc...

  When I turn my comp.on it gives me all sorts of messages cannot find shortcut to file.it is unable to deal with a problem.

  When I turn my comp.on it gives me all sorts of messages cannot find shortcut to file.it is unable to deal with a problem.

  Hé el24

  you do not etc system restore disk cleanup to put your computer to the standards of the factory how you bought it if that's what you hear

  Contact your computer manufacturer and ask them to send you a set of vista recovery discs and also ask them if you have a vista recovery partition on your hard drive to reinstall vista back to factory standards

  you will normally need to press F10 or F11 at startup to start the recovery process vista back to factory standards

  Ask them the sequence of keys to use to start the process from the recovery partition

  If in your question that you mean how do you do maintenance work on your existing operating system, please let us know

  Walter, the time zone traveller

• Import Thunderbird can't find Eudora files - all facilities are normal - what will work?

  Use the import function - or "import all" or "address book" and "mail" separately - in all cases no files are - all systems have basic thunderbird Setup - eudora 7.1.0.9 version (sponsored mode) - 24.5.0 - tried to help, but nothing seems to help

  something here does not match.

  Windows 6.1 is windows that 7 Eudora apparently does not work on Windows 7 correctly.

  However, make sure that the registry key that points to the data files see http://bahut.alma.ch/2007/09/importing-eudora-address-books-into_10.html

• How can I find out what all the "others" are on my hard drive?

  I'm trying to free up space, storage, there are so many other space of plug, but I'm not sure how to locate files to remove. Help

  Explains the other > OS X tips storage display

• How can I find and download Windows XP Service Pack 2 (or higher) to a computer so that I can access the internet by means of a USB adapter wireless?

  I have an old, unused Dell Dimension 8200 desktop with professional MS Windows XP operating system. I am trying to connect wireless to the internet. At the suggestion of Dell, Dell, I bought a Netgear N150 Wireless USB Adapter Ondaaah 1100. When I try to install tp, I get a message that "this OS is not supported. Please install this software on Windows XP (SP2 or later). "So, my request!

  You can get it here.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

• I can't find my lexmark x 6100 all-in one series on my comptuor, it does not indicate the default value

  I CAN'T FIND MY PRINTER ALL - IN - ONE - PRINTER SERIES.  It is SAID IT is THERE, BUT SAYS NOT SET AS DEFAULT. What does that mean?

  Hello

  -What is the exact error message you see when you try to print?
  -This work was fine before? If so, what are the changes in software/hardware on the computer?
  -What version of windows you have?

  If she says that a printer is not set by default, this means that there is no recognized printer or the printer that is there is not yet defined as a default value. Here are some steps that might be tempted to solve these problems.

  Method 1: Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
  This see below mentioned articles that may help you in the matter of fixing.

  Method 2: Solve printer problems.
  You can use the link as a reference which may help you fixing the issue below.
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  First of all, try to uninstall the printer drivers, then unplug the USB cable from the printer and then try to install drivers from the Brother Solutions and plugin site then the cable and then try to print.

  Method 3: Download the drivers from the Lexmark Web site
  You can also try to download the latest drivers for the printer from the lexmark support Web page and install.
  http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

  I hope this information helps!

• Is it possible to see a list of all the words of hotspot?

  Hello
  
  I noticed that I can see the list of all the words in the index and glossary, however I can't find a list of all the words of hotspot - not everything in the index is a word hotspot - ideas?
  
  Thank you
  
  Jill

  Not quite like this would also pick up other hotspots in expansion entered manually. Search for a class = glossterm instead.

• Deinstitutionalized drive, my computer can not find the music stored on the internal drive

  I was recently released from the balance of PAYMENTS (Bureau of Prisons), and I gladly paid $25 for the reader deinstitutionalized. I got it in the mail and I am very happy with the improvements, however, when I plug it into the computer, the computer cannot find the music that I invested a lot of money.  The drive works fine.  I can listen to all the songs that are on it, but I can't find them with all software, including the software downloaded from Sansa. When I click on the player, in any program/browser, I get the same thing: the folders that are empty.  It saves space, but sees ALL files.  Many of the albums available at the bottom of the PYRAMID were incomplete and I want to "fill the gaps", but can not find the whites to fill.  Any help would be wonderful.  I paid my $95 (for the player AND have unlocked it) MORE about $1400 in the songs, so it's a pretty big deal for me to get access... Thanks in advance.

  My guess is, it is a question of USB MSC - MTP mode.

  Your drive may be connected to your computer in the title of one of the 2 separate USB MSC or MTP modes.  This is located under settings of the player.  (There is a 3rd option it, auto-detection, trying to connect under MTP mode but then fold in MSC mode, if necessary.)  Is the reason why it's important, files transferred to the Clip under a mode USB can only be seen by your computer when the computer is under this same mode.  And so, for example, if the songs are put on the player mode USB MSC, if you connect later under MTP mode, the computer will not see these files.  If you have set the player to one of the USB modes and always use this mode (MSC mode is the least problematic, in virtue of which the player is considered to be a USB key; however, MTP mode is necessary for files protected by DRM), you're fine.  If, however, you change mode, emits a "invisibility".  And if you're ready auto detection, the computer can change the modes on you without you knowing.

  And thus, better Board: turn on the player (recommended) MSC or MTP mode and stay there and stay away auto detection setting.

  And if you have been on a mode but want to switch to the other and to be able to see all of your files on your computer, set the player to the previous mode, transfer your music to your computer and delete them from the player, re - set the player to new USB mode and transfer the songs back.

• Where can I find my order history?  I need to download to a new computer.  Everything has the adobe page is a ground for the cloud.   How to access my account to manage?

  The Adobe page has changed since my last visit.  I can't find my story of adjustment or control account.   I need to download my purchased Lightroom and Photoshop but can not find these.  All I see is a ground for the cloud.

  You need to sign in to your Adobe account (all accounts share the same server front-end creative cloud). Top of page, you will see your name, click it and then click on the Plans and products. I suggest you click view your products as it is there that you will find all the products that you have registered on your account.

  

• The list of all public reports in OBIEE

  Hello
  
  IM do some tests on a platform integration project.
  
  I need to test all the reports/dashboards that are saved in our public folders in OBIEE, did someone knows a way I can get a list of all reports contained in these folders without having to manually see each folder/subfolder?
  
  Any advice would be greatly appreciated.
  
  Thank you
  
  Kenny.

  Hello
  You can check out them in this way in the dashboard itself... Change the dashboard object and location of records, search for and select a shared folder itself. Save it. Now to go page to dashboard in which you have registered, you can see shared folder and the folders and subfolders in it.

  After you add the folder in the dashboard object, you can see dossier_partage in this way on the dashboard page.
  Check here... http://picasaweb.google.com/lh/photo/Np_yc5ivciWHzKAFdmF3sQ?feat=embedwebsite

  Kind regards
  Srikanth

  Published by: Srikanth masbah on October 21, 2010 03:50

• New Essbase application can be registered automatically in the shared Service

  Hi Experts

  I created an Essbase application in EAS web console (URL is : http://application-tier server: port/easconsole). How can I register it at the service of the brightness. The paper said that it is should done automatically, but I can't find it in the shared service. Do you have any ideas about this? I use EMP 11.1.2.3 and the server operating system is 64-bit Win2008. Thank you.

  The problem is resolved after add "AuthenticationModule CSS" in the file EPM_instance\EssbaseServer\essbaseserver\bin\Essbase.cfg file.

• I suspect someone is using my key synchronization. Where can I find a list of all my devices registered on sync?

  I store my sync on my USB key, and I suspect that someone else could find it. Where can I find a list of all the devices I have currently recorded on sync?

  Hello

  You can find this information in "Tabs on other computers" in the menu of your history.

• HP psc 1210v former all-in-one can not find in the list and can not find the disc

  I have a laptop HP with Windows 7 Home Premium (Pavilion dm4).

  I am trying to install the driver for the psc 1210v, but it is not listed in the Windows Update list, and I can't find the installation disk.  Would the psc 1500 or 1600 series installation work?

  Thank you

  You must run the "Windows Update" in the printer to add.