I can't get the CD or Dvd to play, burn, copy, etc... nothing at all.
I can't read cd or dvd. my computer will not run or admit that there is anything in the drive.
Hi jlykins68
Your DVD drive appears in the computer? If this isn't the case, follow the instructions below:
- Open Control Panalpina in the Start Menu
- Once opened click Systerm and maintenance
- Then open the Device Manager
- Once its loading is that you can see all your drivers on your computer
- Because you don't want DVD player, you must press on the plu monkey beside him
- If the device is disabled (you can tell by a white arrow pointing downwards with a grey line) click on the Enable button (located on the 2nd bar and the last icon through).
After that, you have to restart, or check that the device is up to date by pressing the button in the bar of 2nd again, but the 3rd in the last.
Will324
Tags: Windows
Similar Questions
-
I scanned my slides 35mm to the computer-how can I get the on a DVD?
When I go to 'burn' it continues to "burn" photos on the hard drive of the computer, not to "burn" the DVD. ??
Hello
1. don't you make changes on the computer before the show?
2. you receive an error message?
3. you use any DVD burning software?
You can refer to the procedure described in the link to burn pictures to dvd.
Burn pictures or videos to a CD or DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-pictures-or-videos-to-a-CD-or-DVD
Check the link for more help:
Disc burning: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/disc-burning-frequently-asked-questionsFor more information, see the following links: -
I can't get the wallpaper to change on windows 8 pro. I tried all the regular methods
I just installed Windows 8 Professional on my computer. I'm used to Windows 8, Windows 8 customer review by. I can't change the wallpaper. I tried all the regular methods. Can someone help me solve this problem?
Right-click on your desktop
Click Customize
Click on the desktop background
Select a wallpaper or choose one of the themes.
Also, make sure that your graphics driver is updated.
-
How can I get the clips in record full-time instead of 25 seconds (that they seem to be defined) using windows DVD maker
Hi LorraineDawson,
Here's a walkthough troubleshooting on this issue:
hope this helps
B Eddie
-
Hello
I have a XPS 15 / L502X 2011 - dead HDD now - and I installed a disc SSD - BUT where/HOW to get the Windows Installer DVD for my PC.
Can not get with the old drive - I did a Rep old installtion disk - and I DO not think that this contained the windows and drivers for my DELL.
But it doesn't! :-/How now to install the new HARD drive on my dell? Anyone?
BR
RenéROFMAN
If you are a resident of the United States and are the registered owner of the computer, a disk that contains the operating system specific to your system factory installed can be requested HERE.
Note: Dell may charge for the disc.
If you do not live in the United States, contact the Dell Technical Support which is in your country.
Bev.
-
Purchase DVD LR6 Adorama, but Setup does not connect to the internet so that I can record. Internet works fine. I have Adobe account.
I went to Safari to Chrome and downloaded the trial version in the hope to bypass the DVD version, but I can't get the program to start. I get the same message that I should connect to the internet and connect. It seems impossible after 3 hours. Spent an hour chatting with the support of the India.
Also remove the cookie file and reg Lightroom then enter the serial number and check.
Windows:
Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.
Type below command and press the enter"" key.
programdata %
It will open the ProgramData folder. inside locate Adobe folder.
Go to Adobe > Lightroom.
Open Lightroom and delete all the files inside,
Then run LR 6 and enter the serial number,
Mac:
(1) right-click on the icon in the Finder, then select the 'Go - To Folder' option.
(2) you will get a text box, type in the following command and then press the 'return '. (" Do not miss ~ symbol" "')~/Library
It will open the folder of the user's library.
(3) then navigate to Application Support > Adobe > Lightroom.
Open Lightroom and delete all the files inside,
Then run LR 6 and enter the serial number,
-
My wife and I just bought a Sony Bravia TV and Blue-ray Disc/DVD Home Theatre system. We hung the blue-ray to TV using the HDMI cable and hung stakeholders for the theater House for blue-ray, but the audio single system who will play is TV. I can't get the home theater system speakers to work. How can I make them work?
Hello Eric,
Alternatively, you can follow the link below to listen to the sound of television through the speakers of the Home Theater System (HTS).
http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1000587
Make sure that the TV speakers are disabled in the TV menu.
If my post answered your question, please mark it as an "accepted Solution".
-
Where can I get the software of Toshiba for my Qosmio X 770?
Hello
I have a TOSHIBA QOSMIO X 770 new PSBY5E-01W00MEN
System serial number: 1C079361KI chose to have WINDOWS 7 HOME PREMIUM 64 - bit os... I have a MSDN subscription and you are unable to move on with this single facility the fully monty. So, I made a partition and installed win 7 ultimate 64 bit there. Now of course, I want the Toshiba Software on my ultimate score. Where can I get the software that was preinstalled on the original operating system (that I have left intact)?
Yes I know that I can't pay for an upgrade, however, I don't want to do that. Its just more money right now. As I have the subscription, I did what I did above. I might even overwrite the original... but I need all the sw of orginal first Toshiba.
CANY anyone point me in the right direction for help with this or know where I can get them?
Thanks for any help
Tina
All the drivers, tools and utilities for your Qosmio X 770 you can find on the download page of Toshiba - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
Is all the stuff for Win7 64-bit available?
If you need assistance, you are prompted.
By the way: you create recovery DVDs?
-
Where can I get the WinDVD for Satellite P100
I bought wired P100, there was windows vista. I downgraded to XP, but lost all the software as Windvd platinum, which was packaged to portable computer.
Where can I get the player? I have not found any other CD/dvd as "restore dvd" which would bring vista :(
Thank you.
Hello
I'm afraid there is nothing to do: (m
The WinDVD platinum was supplied with the OS from Toshiba and it of not possible to install it without using the Toshiba Recovery CD!
Toshiba image contains Windows OS, all Toshiba drivers, tools and utilities and additional software.
All of these tools will be installed by using the recovery CD.But if you want, you can use a freeware DVD player. Search the web site for some useful tools
By the way; The Toshiba drivers and utilities (but not WinDVD) can be downloaded from the page of European driver of Toshiba.
Have a nice day ;)
-
I can't get the drive on my pc is there a button on the key board to eject because its not eject not
I put a share kodak disc into my computer but I can't get the Panel of key has an eject button eject
Hello
go to the computer - player DVD - right-click on it - then try and open it
or follow these steps and use a paper clip to open the drawer
http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm
http://www.ehow.com/how_2324439_eject-stuck-DVDCD-drive.html
-
In windows movie maker, I'm trying to open an old project. It opens, but there is no video clips - only x or empty clips. How can I get the original film clips show?
I did a movie and released a dvd. Then, I moved my files from movie on an external hard drive to store files and free up space on my computer. So I went back to try a pull up the project and got every X / white clips. So now, I rebooted my computer with the video files I removed on the external hard drive and it still shows empty clips.Help.The red Xs indicate that Movie Maker cannot find the original source files.
If the files are still available... just right click on the red Xs and go to the
current location of the files source and you may be able to restore the
path. -
Moose title: How can I get the age of Mythology to work on windows vista
every time I put the disc in the computer installation screen dosnt pop up and nothing happens the disc passes just for a bit and stops, and the cursor hangs a bit and I can't get the disk to the computer unless I restart the computer
Hi rew55545,
(1) is this problem limited only to the age of Mythology disc?
(2) what version of the game you are trying to install?
Method 1: Run the fixit available in the link below and check if that makes a difference
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Method 2: run the fixit available in the link below to resolve any problems with DVD player.Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 3: Select the boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
-
I can't get the system to play a CD in my drive
Original title: Re: Vista.
-----I can't get the system to play a CD in my removable drive - even if the CD is in the drive. Does anyone have an idea how I can fix this problem? First issue of the time.
Thank you
Hello
· What is the brand and model of your DVD player?
· It was working fine?
· What changes were made before the grant took place?
Please follow link below:
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
-
can't get the drivers for the cd/dvr device does not read or write
original title: can not get the drivers for the cd/dvr device read do not or writeing
How do car keys DVD for read or write on vista premium. the drive has failed. ?
Try to run planned it from this link:
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems -
Where can I get the iso file of windows 8?
I bought a cd of Windows 8, I have the product key, but I don't have the cd anymore. I tried to use the installer of windows 8 on the website, but it keeps saying that he could not tell if my pc is ready to install windows 8. where can I get the iso file?
Who does not work even when the online version and commercial version are somewhat different and your retail key are except in the download web site. You will need to either borrow a DVD of 8 Windows or contact Microsoft support and get a replacement. Hope this helps and if you need another post to help and we will be happy to help you.
The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.
"When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir
Maybe you are looking for
-
So I always suggest What's New, Scooby-Doo! as this is probably one of my favorite Hanna Barbera Cartoon Show, but since I live in Australia, it seems unlikely that they will add, that I think it stinks, I really want to buy it, how is that iTunes ca
-
Is there any current plan to provide an update firmware to the SD card reader to make it consistent with the new SDHC standard?
-
SVCHOST.exe error, 0x00b030f0 cannot be written...
cannot get the desktop, I tried safe mode, same result, tried the first 'R' for repair on windows xp pro sp3 install disk, same result, the installation process indicates 39 minutes to complete, system is not fixed, I can click OK on the error messag
-
Java & window installer question
I'm trying to update my Java. I have 2 Java on my computer: Java (TM) 6Update3 and 6Update23 of Java (TM). Can I uninstall the 6Update23 of Java (TM), but I can't uninstall it. It comes up with an error1719 saying that the windows service install
-
Reading single line of the text file
I use the following code to read a .txt file private String readTextFile (String fName) {}String result = null;FileConnection fconn = null;DataInputStream is = null;try {}fconn = (FileConnection) Connector.open (fName, Connector.READ);is = fconn.open