I can't move some lines and objects in my Indesign document.

These objects are appearing in my indesign document, but I can't select them to move or delete.  These objects are not locked.  I need assistance to move these objects.

Can you show us a page, please, with the layers Panel opened and expanded layer.

Tags: InDesign

Similar Questions

  • How can I move these indicator and the control to another page?

    How can I move these indicator and the control to another page? I page Kontrol and those on Installningar page, move!

    Or I want to hide them Kontrol page, how can I do

    Thank you

    Hi q8.

    move: select the controls, move them out of the container tab, drag them into the appropriate page of the tab container

    Hide: Terminal controls (!) right click, select "hide"...

  • I can't open some programs and also what indicating computer it is said GfxUI has stopped working. do what Mathilde?

    I can't open some programs and also when the computer start he says that gfxui has stopped working. What I have to do work?

    Hi, Rosemary,

    Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

    Without knowing your OS or the exact error message and everything Word to Word or the manufacturer, brand and model of your computer (especially the chipset), it is very difficult to provide you with clear instructions or recommendations; However, here is a link to another thread where someone had the same problem and there are two solutions (both different and both worth a try - if the first doesn't work, try the second): http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/gfxui-has-stopped-working/e7f88c22-7c58-4fc2-9ae9-667556d0c4fc.

    If this does not help, check out some of the alternative links on this problem in the following search: http://www.bing.com/search?q=gfxui%20has%20stopped%20working&PQ=gfxUI&SP=2&QS=AS&SK=AS1&sc=8-5&form=BB07SS&pc=BB07.  If you want, you can refine the search to include more information, such as your operating system or suite of the message and the results could be more useful.

    I hope this helps.  If this isn't the case, post back with the above-mentioned information that would help as well as what you have tried and what happened when you did.

    Good luck!

  • "due to an unidentified problem, windows cannot display windows firewall settings" fixed but still can not visit some sites and the laptop now turns off the coast on me. What should I do?

    I have an Apire one laptop with Windows xp service pace 3. I had to restore it to factory about 3 years ago. Some time after that the sound system began to slow and the Synaptics mouse stop working properly. I can move the pointer, but the left click does not work. It works in safe mode but not in normal windows. I used the Acer eRecovery for correct, but it did not work. I tried to download the driver for the mouse on the internet, but some how it could stop the download. I gave up at tring to fix. Some time in late March or early April, I couldn't access internet and after 22:30. I ran the diagnosis that is provided by internet explore and he said that the HTTP and HTTPS worked but the FTP did not work. AVG later told me my firewall is disabled and there was the possibility to reactivate it and I did. After internet explore stop allowing you to enter certain sites that I wanted to enter, I ran the Diagnostics again and he told me that a firewall client has been the cause of the problem. I tried to control my firewall setting, but had that "due to a problem not identified, windows cannot display the firewall settings". I thought AVG was the problem, so I have unintalled then he returned and attempted to access the firewall but got the same message. I typed in Google MySapce and found this site. I followed a few directions given to others in the thread started by joecarpenter33 and discovered that my firewall has been deleted and Base filtering engine has been deleted also. I downloaded and ran Malwarebytes ANti-Malware and SUPERAntiSpyware Free Edition and tdsskiller. MBAM has found a Trojan. The results of the analysis is less to:

    Malwarebytes Anti-Malware (Trial) 1.75.0.1300
    www.Malwarebytes.org

    Database version: v2013.04.10.14

    Windows XP Service Pack 3 x 86 NTFS (secure/setting network Mode)
    Internet Explorer 8.0.6001.18702
    Ziadie Berry: BERRY-LAPTOP [Director]

    Protection: disabled

    10/04/2013-17:44:54
    MBAM-log-2013-04-10 (17-44-54) .txt

    Scan type: quick scan
    Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
    Analyze the options disabled: P2P
    Objects scanned: 271656
    Time elapsed: 43 minute (s), 42 second (s)

    The process of memory detected: 0
    (No malicious items detected)

    Modules of memory detected: 0
    (No malicious items detected)

    The registry keys detected: 0
    (No malicious items detected)

    The registry values detected: 0
    (No malicious items detected)

    Registry data items detected: 0
    (No malicious items detected)

    Files detected: 0
    (No malicious items detected)

    Files detected: 1
    C:\RECYCLER\S-1-5-21-4674304-3331980883-3375822000-500\$7832f44fdd2ba165f6ea01bec7f363fd\n (Trojan.0Access)-> quarantined and deleted successfully.

    (end)

    Malwarebytes Anti-Malware (Trial) 1.75.0.1300
    www.Malwarebytes.org

    Database version: v2013.04.10.14

    Windows XP Service Pack 3 x 86 NTFS
    Internet Explorer 8.0.6001.18702
    Ziadie Berry: BERRY-LAPTOP [Director]

    Protection: enabled

    10/04/2013 23:43:49
    MBAM-log-2013-04-10 (23-43-49) .txt

    Scan type: quick scan
    Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
    Analyze the options disabled: P2P
    Objects scanned: 269636
    Elapsed time: 49 minute (s), 41 second (s)

    The process of memory detected: 0
    (No malicious items detected)

    Modules of memory detected: 0
    (No malicious items detected)

    The registry keys detected: 0
    (No malicious items detected)

    The registry values detected: 0
    (No malicious items detected)

    Registry data items detected: 0
    (No malicious items detected)

    Files detected: 0
    (No malicious items detected)

    Files detected: 1
    C:\WINDOWS\assembly\GAC\Desktop.ini (Rootkit.0access)-> quarantined and deleted successfully.

    (end)

    I ran the Diagnostics today after Internet explore and my other browsers stop allowing me to internet access. That's what came back:

    Diagnosis of last run time: 17/04/13 17:48:14 WinSock Diagnostic
    WinSock status

    attmpting error information to validate the Winsock base providers: 2
    error not all entries could be found in the basic services provider winsock catalog. A reboot is required.
    user redirection of information in support of the appeal

    Diagnosis of network adapter
    Network location detection

    Info to help home Internet connection
    Identification of network adapter

    Info network connection: name = Local, peripheral network connection = Realtek RTL8102E Family PCI - E Fast Ethernet NIC, MediaType = LAN, type = LAN
    Info network connection: name = wireless, peripheral network connection = Atheros AR5007EG Wireless Network Adapter, MediaType = LAN, type = Wireless
    Info both Ethernet connections and wireless available, ask the user for selection
    required user input action: select network connection
    Info Wireless connection selected
    State of the network adapter

    Info network connection status: connected

    HTTP, HTTPS, FTP Diagnostic
    HTTP, HTTPS, FTP connectivity

    WARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
    warn HTTP: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
    warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
    WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
    WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
    WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
    error could not make an HTTP connection.
    error could not make an HTTPS connection.
    error could not make an FTP connection.
     
    Still, he remains connected to the wirelesss connection, but won't let me access the internet. Right now I use a proxy to help, but access to the sites are limited.

    I used the tweaking software and my firewall is back but, I have yet to visit some sites and the laptop now turns off by itself.

    Hello

    Follow these methods.

    Method 1.

    Start the computer in safe mode with network and run a full scan of computer viruses.

    To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

    Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

    Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

    Method 2.

    If the steps above do not help, then try to scan the computer using Windows defender in offline mode and check if that helps.

    Search for spyware and other potentially unwanted software: http://windows.microsoft.com/en-US/windows7/Scan-for-spyware-and-other-potentially-unwanted-software

    What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline

    Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

    Method 3.

    You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.

    How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151

    Let us know if you need assistance with any windows problem. We will be happy to help you.

  • Password: can not get in line and my laptop will not accept my password

    yesterday morning I went online with no problems, but when I tried later in the day that my phone does not accept that my password so could not get online - tried again this morning without modification.

    Thank you Mick for your repl to my problem, the problem is I can't on line at all. I use now the phone my wife to try to get help.

    Eddie

    It has nothing to do with getting online with your computer.

    Use portable your wife to read, what you arereading here.

    Everything I told you to do it was to read what was at this link to try a ssolve your problem:

    If you can't do it, comsider reinstall Vista.

    If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

    You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

    • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
    • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
    • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
    • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

    To use system restore to log on Windows 7 or Windows Vista when you lose access to an account, follow these steps.

    Note To do this, there must be a restore point from the system in which the connection was successful.

    1. Insert the Windows Vista or Windows 7 DVD, and restart the computer.
    2. When you receive the following message appears, press a key:
      Press any key to start from the CD or DVD.
    3. Set the following preferences and then click Next:
      • To install language
      • Time and currency formats
      • Keyboard or input method
    4. Click repair your computerand select the operating system you want to repair, and then clickNext.
    5. Click System Restore, and then click Next.
    6. Click on the food that you want to use, and then click Next.

      Note Click a restore point that will return the computer to a State where the connection is successful. After you use the system restore feature, reinstall all programs or updates that can be removed. You won't lose any personal documents. However, you may have to reinstall programs. You may also need to reset some personal settings.

    7. Confirm the disks that you want to restore, and then click Next.
    8. Click Finish, and then click Yes when you are prompted.
    9. When the system restore process is complete, click restart to restart the computer.
    10. Once the computer restarts, click close to confirm that the system restore process has finished successfully.
    11. Use an appropriate method to open a session. For example, log in using an older password, or log in using another computer account.

    After you connect, you must follow additional steps, depending on the scenario you encounter.

    Additional steps for scenario 1

    1. After you log on, change the password for the protected administrator account.
    2. After you change the password, restart the computer. Make sure that you can connect by using the new password.

    Additional steps for scenario 2

    1. After you log on, make sure that each user account can log in using the appropriate credentials.
    2. Change the password for the user account that cannot log on.

    Additional steps for scenario 3

    1. After you log on, use the element user accounts in Control Panel to create a new protected administrator account.
    2. Log in using the new protected administrator account. Then delete the older protected administrator account which has been restored.

      Note For security reasons, do not use the restored protected administrator account.

    Additional steps for scenario 4

    1. After you log on, use the element user accounts in Control Panel to create a new protected administrator account.
    2. Log in using the new protected administrator account.
    3. Change the old administrator account protected with a standard user account.

    Mick Murphy - Microsoft partner

  • CS4 Mac can only move a line in a table?

    I made a table, but I now want to spend 7th for the position of rank 2, thus pushing others down so that the previous line, two would now rank 3.  In Excel, I would select the line and then click on and hold the line with the mouse and move it upwards or downwards according to the needs and move it to where it is when I release the mouse button.  I can't find a way to do it in the code.  Any suggestions would be welcome.  Thank you.

    I don't think you can move lines. You can cut the line 7, insert a line to the right of line 1 and paste line 7 on the empty line inserted.

  • How can I move all messages and folders in 'Local folder' in the folder of my main account? The local stuff is to import from Outlook

    I imported my mail from Outlook, and they went into a local folders. I want that they in the main folder for the my account section. How can I move them there?
    For the moment, I create each folder and then copy the contents of one folder to another - crazy, and I have dozens of files

    DOH!

    After spending most of last night slowly moving the files from the Local level to the account that it's a little late for me to go back the other way, but what you suggested looks like it could work.
    Still seems simpler to 'right click' a folder and "move it" and all subfolders to have it move properly as well. Of course your test produces a different result for me. I wasn't able to drag all the folders with the sub folders and the contents of these subfolders go with it, only the contents of the main folder is gone.
    Still, as I said, I have now done most probably time call it a day on this topic and I hope that all similar problems see your answer above - cheers.

  • How can I move the "Virtual Machines" folder to the My Documents folder?

    VMwareFusion is to put the "Virtual Machines" folder in the Documents folder in the home folder (/users/ [username] / Documents), how can I move elsewhere (as/Library/Application Support)? The user Documents folder is not the right place for automated it system files, it is intended for personal documents.


    I am running VMware Fusion on OS X Yosemite (and the virtual machine is Windows 7).

    You can keep your virtual machines anywhere you want. Here are the steps to move:

    1 exit VMware Fusion. You can stop first of all of your running virtual machines.

    2. drag your virtual computers folder or the individual VM "files" where you / them. Filenames usually end in ".vmwarevm". There is no need to call the new folder "Virtual Machines" - you can call it anything you like.

    3. Launch VMware Fusion. If the library of the Virtual Machine window is not open, open it (Windows menu-> Virtual Machine library).

    4. ensure that all of your icons for the virtual machine are light gray and say "file not found".

    5. right click on each virtual machine in turn, and select Remove. When you are done, leave the window of Machine virtual library empty open.

    6. in the Finder, drag the icons of file virtual machine in their new location and drop them in library of virtual machines VMware Fusion window. Drop them one by one in the original order, you got, or rearrange icons later.

    7. run your virtual machines as before.

    When you create new virtual computers, navigate to the desired file before the Save.

    IMPORTANT NOTE: If you your folder of Machines ~/Documents/Virtual excluded from backups Time Machine, don't forget to change the exclusion to the new folder.

    Time Machine backups are not reliable for virtual machines. You must have another strategy. (I shut the virtual machine down, compress the 'file', and then move the compressed file to a folder that is included in the Time Machine backups. This isn't the only strategy, but it works for me.)

  • How can I activate this line and its intersection in a separate object?

    My initial object is #1, then I draw a line on #2.

    How can I activate the area highlighted in a separate object? (I cheated and filled this field with Photoshop, but I would like to know how to turn this red area into a separate object so that I can fill it with Illustrator)

    Thanks in advance

    Screen Shot 2014-06-22 at 21.34.11.png

    Alex,

    Or you can just Pathfinder > divide and separate.

  • Can I move multiple layers and some keys to different layers along the timeline?

    I'm a newbie trying to achieve and can not find how to do it in one step.

    You can move selected keyframes left or right simply by dragging keyframes. Make sure that you're hovering directly over a keyframe. When you make this Layer 3 will become deselected and will only move keyframes.

    If you take just the layer 3, then all the keyframes will move.

    You can move the CTI to the first keyframe in layer 5, then set a layer marker on the layer 3, then do drag the layer 3 to its new position, and then select the keyframes on the 5 and 2 layer and drag them to align it with the layer marker. Hold down the SHIFT key will make keyframes align with the mark.

    It does not work the other way around. If you move keyframes, so try and align the guide layer to keyframes, it won't work, or at least not work reliably.

    I hope this helps.

  • How can I move some of my contacts in my personal address book in the list of "collected addresses"?

    All addresses in my contact list are under "personal address book" and none in "collected addresses". The personal address book is too long and fill to the top with addresses I rarely (if ever) use. I prefer the new addresses that are automatically added enter the list "collected addresses" and would like to transfer addresses rarely used in this list.

    The collected book adds all start addresses and gets big Rapids. But if that's what you want drag you and drop contacts between books.
    Select the folder of personal book, so it appears in the main window
    Select the contacts to move. Hold down the CTRL key while clicking to select multiple.
    Drag the contacts to the new book folder and drop them there.

    You can create a new address books on the file menu in the address book window
    File-new-address book

    It would be more logical for me to create a new book and move contacts unwanted on the personal book.
    The default value when adding new contacts is a book.

  • My menu Favorites folder is in my recipe file. I can't move it! And I can't tell if this is a duplicate - it seems to be. Can you help me?

    I organize my favorites and somewhat moved the menu bookmark folder to the folder of recipe. When I try to move it or copy it, spinning wheels Mac begins. I can't say if the spin lights never so I wait a while and then I force quit and start over. How can I get the menu bookmarks folder instead.

    Also check for problems with the database places.sqlite file in the Firefox profile folder.

  • I use FF 20.0.1. How can I move my favorite and parameters fron a laptop with Win 7 on a new laptop with Win 8. I can't find appdata on the Win 8 PC 8

    I want to use Firefox on my desktop Win 8. I want to spend my favorites, settings and the modules to a new laptop from my old Win 7 machine Win8. I know how to do with machines Win 7 by moving my profile. I can't find appdata on the Win 8 PC to move the profile for.

    I also want to do the same with Thunderbird.

    See also:

  • I can drag and drop bookmarks from one folder to another, but I can't move them up and down in a folder.

    Once I "show all bookmarks", go into my library and click "Bookmarks Menu", all my favorites are listed in the right pane. I want to vertically move bookmarks in this pane, and I can't. (I could always with Firefox 3). I can move them to a folder to another, but not in a single folder. I found a really cool site and want it near the top of my list, not 40 points down where I have to dig for it!

    Try to cut / paste via the context menu if drag does not work.

  • How can I move my files and the operating system on a new hard disk on Inspiron 580 s.

    My hard drive failed Diagnostics recently and needs to be replaced.  I have since installed a new hard drive in Bay 2. I need to move everything from the old drive to the new drive and delete the old which is completed. So what is the best way to go about this?

    pjrl

    The simplest method, I prefer to install a replacement hard drive, is to clone the existing hard drive to the new, that will also transfer all applications and programs.

    You need an imaging utility, similar to True Image Home 2015.

    http://www.Acronis.com/homecomputing/products/TrueImage

    Acronis resize partitions transferred to match the size of the new hard drive.

    Hard drive manufacturers, also have their own free cloning software available, but it can be used only with their hard drives.

    First, install the new drive as the secondary and the image of the main hard drive in it.

    Immediately after the cloning, shut down the system, switch the data cable [SATA port 0] to the new disk, making the new master hard drive and see if the system boots properly.

    Start the system with only the new hard drive connected.

    Be sure to leave the original drive disconnected, until the new hard drive is working to your satisfaction.

    Before cloning a hard drive, make sure that the existing drive has no corruption or virus on it, because they will be transferred to the new hard drive.

    It will take a second SATA data cable, there should be a spare connector to SATA power inside the housing.

    Bev.

Maybe you are looking for