I can transcode my AVCHD to DNxHD files in Media Encoder, but when I ingest through prelude, Media Encoder fails.

Similar Questions

• I can't access my encrypted data files backup media on portable hard drive

  I'm completely frustrated because I backed up my elements multimedia such as photos, videos, and documents on my iomega 80 GB usb portable hardrive and now when I try to open the photos there are "no previews" available, my videos "no access rights", in media player and documents "access denied." Yet these same files on my C: WINDOWS XP, they are accessible.

  I have the Iomega HDD 80 GB divided into 2 were leaving and notice that it opens files in this partion but the other does not open media in its partition. Properties for the records that I have problems with checked in the Advanced tab "Encript the contents to secure data". I disabled this restart, restarted all to nothing does not. I need advice because I have the feeling that the ntfs files have rights of access and I have to show somehow that I'm the user for these files. NOTE: I tried all the security and sharing of troubleshooting guides without result; Anyone having problems simular Advisor please a solution to this delema. Thanks - Michael

  Hi msielectric,

  1. What is the full error message you get?

  I suggest you to take ownership of the partition on the laptop hard drive and check if it helps:

  a. Click Start, click all programs, and click Accessories.

  b. right click on command prompt, and then click Run as administrator.

  c. in the administrator of the command prompt window, type the following command and press on enter:

  takeown /F (file path)

  For example:
  takeown /F C:\Users\\Music

  d. now, type the following command and press ENTER:

  CACLS (file path) /G Administrator: F

  Note: Instead of the administrator, you can type your name of user account with administrator privileges.

  For example:
  CACLS C:\Users\\Music/g Microsoft: F (where Microsoft is the account of a user with administrator privileges).

  e. restart the computer and test the issue.

  Referral link: http://technet.microsoft.com/en-us/library/bb490872.aspx
  

• Can't install service pack 1, it says its installed, but when you are looking for a new upates he keeps repeating.

  Original title: update replication

  Hey there.  I recently did a factory reset and now I can't seem to install service pack 1... It says its installed but when I search for new upates I get the same so far again and again and again.  any ideas?

  I don't think it is a good update of the service pack, a because it was only 1.9 MB, but every once its installed, I look for new updates and get the same thing.  its driving me crazy.  I can't keep getting my system at a speed without this service pack

  Hi Jools101,

  You can try the following steps and check if it helps:

  Method 1:

  You can check the update history if the Service pack is installed or not. If impossible to install, then checkfor codes error.

  a. click Start, all programsand then click Windows Update or Microsoft Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, click view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  c. double-click the update has failed to check the error codes.

  For more information, see the article:

  See the Windows updates are installed

  Method 2:

  You can check the article to reset the Windows Update components and check if it helps.

  How to reset the Windows Update components?

  Important: The above link contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information, you can view the article:

  Back up the registry

  Also see the article:

  Windows Update or Microsoft Update repeatedly offers the same update

  Method 3:

  You may also refer to article and check if it helps:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  For more information, see the article:

  Learn how to install Windows Vista Service Pack 1 (SP1)

• Can I have play a .swf file in a viewer window when clicking on link?

  Hello

  I have a thumbnail on my page that I would like to make a link to a video. However, I'm not on it to open it in a new tab or a window, instead, I would just like it to appear as a lightbox display, fading background and playing the video in the same page. The viewer must be able to close or click outside the video at any time to return to the original page.

  Is there a way to do this?

  Thank you!

  Put a file (Ctrl + D) .swf in a Lightbox widget Composition view should not be a problem with your thumbnail image in the trigger.

  The article here can be useful - http://www.adobekb.com/building_your_first_website_pt2.html#building02-addingalightbox

  Thank you

  Vinayak

• Just bought the CC and can not download LR.  I downloaded the application manager but when I go to select LR he wants me to pay again? Help I'm not too savvy, computer just bought CC and can not download LR.  I downloaded the application manager but when

  Any help is appreciated

  Lightroom CC 2015 requires MAC OS 10.8. In this case, you are only able to install version 5 of Lightroom.

  You can install the trial and activation barriers check your hosts file as explained by Brucgovn.

  More info on this doc:

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

• Template created in DreamWeaver file looks ok. But when a new file created with this model shows messy

  I created a template file in DreamWeaver cs5. It is ok. and it looks like this, with pink box showing the editable area. http://smsoftsolutions.com/downloads/test.jpg

  Now the problem is, when I create a NEW html file of this model, in DESIGN view, the content of the template is presented in a way that flows. That is to say. Absolute positioned the DIVs are in a disorderly way, as shown in this screenshot. http://smsoftsolutions.com/downloads/test2.jpg

  When she spotted in the browser, it's show as I hope. But only in fashion design, he demonstrated a relatively positioned way.

  Can someone tell me what I have to do in dreamweaver settings, to show available in a WYSIWYG way?

  At least part of your problem is due to your complete dependence on absolute positioning as a page layout tool. This approach to layout has never been a good and will always cause problems of presentation.

  Additionally, you may not 'content' of the HTML tags in the cephalic region - for example.

  I suspect that there are other mistakes of code on this page, which would be responsible for layout issues. Please consult the page on http://validator.w3.organd fix the found errors.

• I need to import music files into Movie Maker, but when I open the folder for the song the folder is empty

  When I tried to import songs in movie maker I opened the folder and it was empty, but I could play the song in itunes... I looked at the help section in movie maker and found no .m4a is listed as being supported. is there a way to find the song, change it and import it into movie maker?

  When I tried to import songs in movie maker I opened the folder and it was empty, but I could play the song in itunes... I looked at the help section in movie maker and found no .m4a is listed as being supported. is there a way to find the song, change it and import it into movie maker?

  Yes, google for a FREE audio converter. Change your itunes songs or songs that are not supported by the manufacturer of film in MP3, WMA or WAV... mp3 and wma are more preferable. WAV format is too large file size, not practical.
  Then import the song to movie maker. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• can anyone help, my windows media player says is writing files on cd/dvd, but it comes out as white

  Hi people says its writing files to the disc, but when I put back it in the laptop or another player yet to come sound like a blank disc, tried a lot of different cd/dvd discs

  Hello

  ·        You did changes to the computer before the show?

  ·        You receive an error message or code?

  Method 1: I suggest you follow the instructions in the link and check if this may help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Method 2: You can also try to change the settings for burning a CD/DVD and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  Note: reduce speed before burning the data and then check if it helps.

• How can I convert a wtv - avi file

  G ' Day, trying cvonvert wtv files to an avi file. Can I record TV on my computer external hard drive, but when I try and watch the show through my WD TV Media Player the Player cannot read the WTV files. Any help would be greatly appreciated. If possible please keep the simple answer, I'm still learning. Thank you for your time. Shane.

  Try it's free

• I'm unable to access iCloud parameters, that the icon is there, but when I click it, it does nothing. Also recently I noticed that my personal hotspot option is no longer available. Nobody knows what can happen?

  I can't access iCloud parameters. The icon is there, but when I click on it nothing happens. I went into general settings to ensure that no restrictions were on. Also recently noticed that the personal hotspot service is no longer available on my phone. How something like that just disappears?

  For Personal Hotspot, you must ask your cellular provider.

  What setting iCloud does not work?

• I use Windows Movie Maker but when I publish the movie I have a green horizontal band to halfway across the screen. Please can someone advise?

  I use Windows Movie Maker but when I publish the movie I have a green horizontal band to halfway across the screen. Please can someone advise?

  I use Windows Movie Maker but when I publish the movie I have a green horizontal band to halfway across the screen. Please can someone advise?

  =========================================
  The info... copied on the net... may be useful:

  =====

  The Green problem bar setting in Windows Movie Maker
  http://www.bernzilla.com/item.php?id=884

  When I tried to follow the directions, I was unable to find XVid on my
  computer.  So I googled XVid and then (I think) the 2nd entrance to
  Download XVid.  After I downloaded it, I could follow the directions
  bernzilla and when I published a video - Voila! no green bar!

  After thick film Green line is published
  http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=105025

  =====

  Good luck...
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• QuickTime player converted the video AVCHD in BDMV file and now I can't see it

  My QuickTime Player converted my video card SD of AVCHD in BDMV files and now I can't see it on my computer as the BDMV file opens with QuickTime Player, any other application.  Help, please!  Thank you!!

  VLC can play BDMV on a Mac files.

  

• Cotxe movie or scenes in the AVCHD H264 MP4 file format

  Hi, is it possible to use the scenes where record in AVCHD H264 MP4 format?

  If not, is there another format, I can save the movie as a file and not a DVD disc to be able to use scen?

  Best regards Jørgen

  Jørgen

  What version of Premiere Elements and what operating system?

  Premiere Elements offers no chapter markers in an export file saved on the hard drive of the computer. We see this type of functionality in the disc menus.

  In some earlier versions of Premiere Elements, you can find an export as webDVD which in reality was a flash file with menus that could be read from the computer web browser, such as Internet Explorer for example.

  Please consider. If any questions or need any clarification on the question, do not hesitate to ask.

  There was a recent issue on this type of situation. Please refer to the MP4 export with the marker

  Thank you.

  RTA

• After Effects CS5 and Sony HDR - SR1 AVCHD (.) MTS file format)

  Hello world

  I just started with After Effects, and I the only video camera I have is an old Sony HDR - SR1 camera, which records in 1080i and uses the AVCHD file format. I recorded some videos, in which I went to try and import them into After Effects. The program came up with this error: "error effects: '0020.MTS' cannot be imported - this".mts"file is damaged or not supported." I understand that this error is quite common, but I do not understand how to fix it. I've tried the Media Encoder, and the videos that come out are videos of nothing like horrible quality than videos recorded on the camera. I also tried included Picture Motion Browser from Sony (I have the latest version) and when I try to convert, the video also released horrible quality always has these annoying lines on the video. Help, please!

  Thank you!

  In fact, EI must recognize the AVCHD video, because I imported one of my recoedings, which is 1080 p MTS to EI, and it worked. Maybe the problem is in 1080i. I still have her deinterlace my 1080i files and then import them to AE. You can try to deinterlace your files and then import them to AE.

  Regarding deinterlacing, you can google or you can give brorsoft mts converter, which I use now to try. It has a codec for AE and Adobe Premiere, wchich make it easier to import files to the AE. In addition, you can convert your 1080i MPEG-2 files and then import them to AE.

• I have problems to import DNxHD files in first - ideas?

  Hello

  I'm really stuck... I recently shot about 5 hours of footage of helicopter of the coast here in Cornwall (United Kingdom) by using the helicopter companies sony HDcam.

  Unfortunately as I do all my work on P2 and CF cards I don't have the equipment to capture images from of HDcam tapes.

  I used a guy associated with the helicopter company to take images from strips and place it on a hard drive that I could pick up and change. He was convinced that the best bet is to encode the files in the avid DNxHD codec - and that I would be able to import and edit first. I assumed that he was right because I always managed to import the files, .mxf P2 card with no problems at all.

  Anyway to get to the point - I got the hard drive earlier in the day and the Prime Minister is unwilling to play ball at all - I get the message "the file has an unsupported compression type" whenever I try and import it.

  I downloaded the AvidCodecsLE to my mac - but no joy...

  Any thoughts would be much appreciated

  See you soon

  Mark

  Ah, I see what he was doing. He captured the HDCAM tapes in the Avid, which captures images in an envelope of MXF files. It does not really matter the codec; all Avid captures are MXF files. What he did was give you captured files, which you can tell by the hodgepodge file name and extension MXF. He probably took right to your external drive.

  Unfortunately, even if the codec is DNxHD (probably), first will not work with MXF wrapped DNxHD. first works with MXFs, but only if they are camera generated such as a P2 or XDCAM camcorder. Had exported QuickTime MOV DNxHD encoded, that would be another story. First'd crack those opened without problem.

  About the only way you will get in these files is to open up with a greedy and export the necessary QuickTime files. You can also try After Effects, if you have access to it; I had some strange and unexpected things like this before. If it works, you can configure comps for each clip and restore them to a usable file first; With DNxHD QuickTime is still probably your best choice.