I deleted some computer programs and now it asks for boot floppies
Original title: I miss and erased cyber link and most of the programs for my computer.my computer keeps asking me to insert the boot disk, but I don't have it.
I erased some programs computer m off tension and need of a start of disc or just a plain system files form the beginning.
Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.
There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/default.aspx/KB/326246
'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
* Original title: drivers
I just finished my first computer, with Windows 7 USB boot, construction and now it asks for drivers. help please?
What drivers?
Your hardware such as a video card may require pilots. Only you know what is in your version of the computer.
-
I downloaded the program and now he asks me a serial number number 6. My serial number has about 20 numbers. Help! What numbers should I use?
Serial numbers are 24 issues. They are grouped as six sets of four numbers, so the six boxes you will each take 4 numbers. If you have only 20 so you're either missing a set of four or not looking for a serial number.
-
I entered the product code and now she asks a redemption code, I can't seem to find it!
I just purchased Lightroom of BestBuy and I try to get my serial number from adobe. I entered the product code and now they ask for a redemption of 24 characters code and I can't find it on the boxes that I had. Where is he?
Hi BritneyL,
Please visit: https://redeem.licenses.adobe.com/getserial/s/redeem
You enter your purchase to http://www.adobe.com/go/getserial. You can find more details in the process of recovery from serial number FAQ | Product activation point of sale - http://helpx.adobe.com/x-productkb/policy-pricing/serial-number-retrieval-process-faq.html.
-
I recently had a virus on my computer and my security system suggested that several files. I think I maybe deleted some files wrong because now I can open only some files. I tried to restore my computer to factory settings, but it won't let me open the system restore. I also have an installation disc, but it does not work either. What can I do to get those files or restore to the factory settings? any help would be appreciated
original title: help!Hi AndrewThomas 924,
Please see the thread following SpiritX troubleshooting for XP:
I hope this helps!
-
I recently C clean the computer (Vista) and cleared out some unused programs. Now, I get a message starting "search settings stopped working. Is this a problem?
Thank you
Hello
(1) are you facing problems with your computer?(2) when exactly the error message is invited?I recommend you perform the clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.You can also run the Microsoft Safety Scanner to make sure that your computer is virus-free.Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.I hope this helps! -
I tried to delete some unused programs of my had drive and cleared PC wlidcl.dll How can I get this program for the PC works as before? The PC works now as slow as a snail climbs. What do you suggest me? Thank you
Norman.--
E-mail address is removed from the privacy *.
original title: wlidcl.dll
Hello
I suggest to follow the steps below and check if the problem persists:
Not one:
Uninstall Windows Live essentials followed the procedure described in the link:
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Step b:
Download and install Windows Live essential from the link:
-
I have an account and pay the subscription each month. I have a laptop and desktop and both gave me access to my programs and now for some reason any my office won't let me connect and none of my programs work on my desk?
You are one of the very few who would get an answer to your problem. I had a similar problem that it resolved itself.
I haven't used my laptop for a while and during a power outage, I wanted to us my laptop. He did not move.
Problem is that due to the power failure my internet wasn't working.
Connecting Wi - Fi has been restored my laptop have been updated and everything worked again.
Make sure you have internet connection on both computers.
-
I deleted the Flash plugin and now I can't install it again
Hello, I deleted the Flash plugin, and now I can't install it again. I reinstalled Firefox (deleted all the folder Program files and Application data folder), but it did not help.
Flash is not in the folder files Firefox or Firefox Applications programs. This and many other Plugins (not Extensions) are "installed" / pointed to by the Windows registry and the real files are in other locations on your hard drive.
Have you tried to uninstall all THE Adobe Flash from your system and start over?
- This will remove all THE Flash of your system - Firefox, IE, all other browsers
- See-> http://kb2.adobe.com/cps/141/tn_14157.html#main_Download_the_Adobe_Flash_Player_uninstaller
- Download uninstaller for 32-bit. Firefox is a 32-bit application and requires the 32-bit version of Flash
- Once the removal has completed, follow the previous instructions (see installation or update Adobe Flash above) to download and SAVE programs install on your drive hard for both IE and other browsers (including Firefox)
My only suggestion would be to try some of the suggestions on the Adobe site: http://kb2.adobe.com/cps/191/tn_19166.html
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
- This will remove all THE Flash of your system - Firefox, IE, all other browsers
-
Can I upgrade to vista without deleting my xp programs and files?
upgrade
Can I upgrade to vista without deleting my xp programs and files? I don't want to lose my programs/files downloaded, but I don't want to argue with remove them and reinstall later
Yes, you can perform an upgrade "On the spot" and all your personal data and software applications will be available in Vista (provided that they are compatible Vista).
As always, you should create a backup Image in XP before you begin the upgrade, just in case. Also check that you still have your XP product key. If this isn't the case, then use one of the below product key finders.
Also: http://windows.microsoft.com/en-US/windows-vista/Upgrading-from-Windows-XP-to-Windows-Vista
-The key finder software product-
Here are some utilities, which will display your product keys:
Belarc Advisor: http://www.belarc.com/free_download.html
(He did a good job of providing a wealth of information.)Also: http://www.magicaljellybean.com/keyfinder.shtml
and: http://www.nirsoft.net/utils/product_cd_key_viewer.htmlNote: Also check the side of your PC case or at the bottom of the laptop for the
Key OEM code. If there is a sticker with the code, it will probably not
corresponds to what is displayed by the utilities mentioned above as OEM such as
Dell use an internal key code when they build your PC.The key on the sticker code should be used with your Windows CD
(who came if everything goes well with your PC) If you need to reinstall Windows.--------------------------------- Image Backup Software ---------------------------------------------
Acronis True Image 2011 - has a fully functional trial version of 30 days available.
(Note: install Acronis and then create a bootable media restoration/rescue CD before you start creating your first image backup)
http://www.Acronis.com/homecomputing/products/TrueImage/
The version comparison: http://www.acronis.com/homecomputing/products/trueimage/comparison.html
True Image User Guides and documentation:
http://www.Acronis.com/homecomputing/download/docs/Free alternative:
EASEUS Todo Backup home V2
(Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
http://www.TODO-backup.com/J W Stuart: http://www.pagestart.com
-
, can not send email - message says may be installed incorrectly and
EU restore the computer today and now can't send email - message maybe not installed correctly, not enough memory - a lot of memory and this number
ox80070002. What to do
See www.oehelp.com/OETips.aspx#7 if you use OE and www.oehelp.com/WMUtil/ if you are using Windows Mail in Vista and you use Windows Live Mail, and then ask here: www.windowslivehelp.com
Steve
-
should I update windows so I changed my destop for files archive programs and now cannot open also my Start menu has also changed
Hi acrhive Rar.
Unfortunately, there is no way to cancel the option archive other than to do all the files one by one.
If you used the shortcuts application option, then I will suggest you to create a new user account and check
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileHe should also take care of the start menu.
Concerning
Terminator -
My computer crashed and now my files and saved emails went to outlook express.
so, my computer crashed and now all my info stored in outlook express, such as e-mail and records have disappeared. I had done a backup of my documents before the computer has crashed on a portable hard drive, files and emails to be there? I looked in the application data folder and it's not an identity, as I am running windows xp. I desperately NEED recover these files and emails, someone please HELP!
Hi alesarose,
When your computer has crashed, records Outlook could corrupt. We recommend that you use Inbox Repair Tool to recover folders and emails in Outlook.
For more information, see How to use the repair tools Inbox to retrieve e-mails in OutlookFor further assistance, please post your query Outlookforums.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Product key for Windows Vista
I had my computer repaired and now I get the message that I need to activate Windows. When I put in the product key, I get the message that this is a mistake. Is there anyway to fix this?Activate by phone
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
Pay attention to step 2: how to do a phone Activation.
Note: If the activation service informs you that she has failed and cannot help with activation, thenSTAY ON THE LINE and your call will be transferred to an operator of activation which will help you to activate your copy of Vista. -
Hi... I updated my acrobat reader program and now my handwritten signature imported is lost... I can't find how to import again! Help!
Hi melissaa22387347,
There is no such feature to import or export signatures drawn. Only digital ID & certificates can be imported.
You will need to draw again.
Kind regards
Nicos
Maybe you are looking for
-
I have laptop Dell Vostro 3446 series in which Bluetooth not transmits or receives a signal. I installed all the drivers still does not. Provide it please help me Concerning Vivek S
-
Requirements of Java SE 7 Programmer II 1Z0-804
https://education.Oracle.com/pls/web_prod-PLQ-dad/db_pages.GetPage?page_id=653 & get_params = P_ID:154 #tabs - 1 - 1indicates that the review requirements of Certification prior to Java SE 7 Programmer II 1Z0-804 is Oracle Certified Associate, progra
-
vROPS to LI LI Agent using log shipping
I am trying to use the solution for recording of vrops to loginsight (Cloud Management Marketplace |) Solution Exchange) and I'm having a few problems, as indicated in this post on the vrops forum... VROPS configuration automatically changes Log Insi
-
HelloI have a model SAN SUN 7117 and ESXi server in a HP DL120G6. The SAN has 4 of the NIC for iSCSI traffic and the ESX has 4 NIC, but only 2 NIC's for iSCSI. In the SAN, I configured an LACP aggregation with 4 NIC problem is that, in the ESXi, I se
-
How to get results for different conditions of a line?
Hello I have the following statement for 11g Select sum (A.Wert) of(with t as (select vtobslpos. RANK rank #, vtobslpos. ANZAHL count #, vtobsl.faellig f #, vtobslpos. PAYMENT vtobslpos wert, vtobslwhere vtobslpos. SYSVTOBSL = vtobsl.sysid and vtobsl