I did a factory reset, now I can't install Windows 7 (I have my OEM installation disc)

Similar Questions

• Changed HARD drive and now I can not install windows 7

  I bought a new HARD drive and interlaced old, now I am trying to install windows 7 home Premium and I get an error: "Windows Setup cannot configure Windows to run on this hardware of computers.

  See if it works...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=23060&keyword=Intel+RAPI...

  Copy the files to a flash usb without all the folders drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, will install W7.

• I tried to install Windows Media Player 11 on Windows 8, but it did not work, so now I decided to install Windows Media Player 12, but how can I do this?

  So, how can I do?

  This is not really supported (or technically even permitted by the EULA), then you will get no official Microsoft help do.

  Note that Windows Media Player 12 adds native support for H.264 (AVCHD. M2ts or. (MTS), the video codecs DivX and Xvid, AAC audio and 3GP, MOV and MP4 container formats, for downgrading to Windows Media Player 11 will remove these format support.

• the hard drive has been replaced in the Tower from my computer and now I need re - install windows vista but have no disk

  hard drive went bad in my computer hp and was replaced, I can't find the disk came with it or restore disks, I'm not sure I ever had any, is a model of Tower not laptop I need to know if there is a way to download a copy for my computer on a drive of my laptop or what should I do?

  Hello

  There is no download available on the Net and your hard drive as failed now, you are unable to make the recovery of the disks.

  And you cannot use from recovery disks of a different brand or model (laptop) to reinstall Vista on your Tower / Desktop

  Contact HP and ask them to send you a set of recovery disks.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  See you soon.

• Factory reset now does not start, doctor No. WebOS available in the profile

  I did a factory reset on my HP Touchpad to give to my son for Christmas. However, I boot the system then select English, then select the country from the United States and the system hangs its been doing this for a few days. I then shut down the system he turned back and did the same thing again and again. I go to my www.palm.com , and log and the WebOS doctor does not appear on my profile. Do anyone know how to install the software on the TouchPad, so I can get that operational back?

  These are .jar files.  Here are the executable java files.  Some browsers have been known to change the .zip extension by mistake.  Try using another browser to d/l the file.

  Go to www.java.com and let the Web site to check your installation to the latest version.

  Make sure that you have the latest java installation on your PC.

  Do you have the great symbol USB before continuing?  You will need the novacom drivers.

  If the process fails, rinse and repeat!  Restart all (you've tried long keys both power and depressed Center on the TP for > 15 seconds, right?), and then try again.

  Good luck, and be patient - I saw the doctor a break of 10-15 minutes before you continue...

  WyreNut

• I recently did a factory reset on my computer and saved all my files on a flash drive when I load them onto my computer, they look all as internet files explore instead of dreamweaver files, please, help?

  I recently did a factory reset on my computer and saved all my files on a flash drive when I load them onto my computer, they look all as internet files explore instead of dreamweaver files, please, help?

  They probably had the IE icon because Windows automatically associate with IE html files.

  It is of no consequence for your work in Dreamweaver, but you can change this association if you wish.

  Go to control panel > default of programs > set Associations.

• I just did an itunes update, now I can't find my music. Help please.

  I just did an itunes update, now I can't find my music. Help please.

  You will need to provide more details, but here is a screenshot of my iTunes (top-left) window

  

  The row of small buttons 'Library' has been replaced by a drop-down box, when you select the library view.  Music is selected in the screenshot.  In the sidebar, under the library, you can select the view to use for the library.  In the screenshot, songs is selected, which presents a library as a list of simple songs with columns.

• How do my mini iPad 3 factory reset if I can't go to the settings page?

  How do my mini iPad 3 factory reset if I can't go to the settings page? The screen of my password doesn't let me in the iPad.

  See if this helps: https://support.apple.com/en-us/HT204306

• Forgotten password for XP user account and did not password reset disk, how can I get in

  Forgotten password for XP user account and did not password reset disk, how can I get in

  Michael, Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky... http://social.answers.Microsoft.com/forums/en-us/w7security/thread/39f56ef0-5d68-41AD-9daa-6e6019c25d37

• How can I reset my sharing permissions for default cause I don't know what has been changed, now I can not install anything

  How can I reset my sharing permissions for default cause I don't know what has changed now I can't install anything, I think it has been somwhere in users

  I don't know which

  Try to fix it with system restore.
  What was this "program"? It came from a reliable source?  It would be wise to carefully check for malware also.

• I deleted the Flash plugin and now I can't install it again

  Hello, I deleted the Flash plugin, and now I can't install it again. I reinstalled Firefox (deleted all the folder Program files and Application data folder), but it did not help.

  Flash is not in the folder files Firefox or Firefox Applications programs. This and many other Plugins (not Extensions) are "installed" / pointed to by the Windows registry and the real files are in other locations on your hard drive.

  Have you tried to uninstall all THE Adobe Flash from your system and start over?

  1. This will remove all THE Flash of your system - Firefox, IE, all other browsers
     • See-> http://kb2.adobe.com/cps/141/tn_14157.html#main_Download_the_Adobe_Flash_Player_uninstaller
     • Download uninstaller for 32-bit. Firefox is a 32-bit application and requires the 32-bit version of Flash
  2. Once the removal has completed, follow the previous instructions (see installation or update Adobe Flash above) to download and SAVE programs install on your drive hard for both IE and other browsers (including Firefox)

  My only suggestion would be to try some of the suggestions on the Adobe site: http://kb2.adobe.com/cps/191/tn_19166.html

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• The pc seems to have gone to a previous set point during the boot, but now she can not install software and doesn't seem to have Norton AV more

  My daughter's office got fried during the last storm, even though she had a surge protector.  Obviously the power company line was bad.  The pc seems to have gone to a previous set point during the boot, but now she can not install software and doesn't seem to have Norton AV more.  When she tries to run a system restore it gets "extended attributes are incompatible."..: thank you for your help.  Debbie

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the scan tool (SFC) System File Checker and check if it helps.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.Microsoft.com/kb/929833

  Method 2:

  Try to clean boot, and then check to see if this helps you.

  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 3:

  Try the steps in the following Microsoft article and check if it helps.

  Problems installing and uninstalling programs on Windows computers:

  http://support.Microsoft.com/kb/2438651

  Hope the helps of information. Please post back and we do know.

• I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work this is the messege I get: the system cannot find the environment that was entered

  I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work. Cannot change network settings. This is the messege I get: the system cannot find the environment that was entered

  Hi kotipelto.

  To better understand the issue, we need the following information:

  Are what environment you referring?  What did you delete?

  Let us know if you can start the computer in safe mode and works as expected.

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. Boot advanced options, select the menu safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  If you can start the computer in safe mode, perform the system restore.

  System Restore: System Restore to put the computer's system files to an earlier point in time.

  Search the steps mentioned in the link below:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-sytem-restore

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Messed up graphics card, now I can't start windows. .

  Messed up graphics card, now I can't start windows. said the plug to the/windows/system32/system address, or something like that, is missing or corrupted. said to run the installation disk, I don't have it. Needhelp, VERY VERY important files on my drive.

  Installing ubuntu natty to edit files, but I would have my back configuration, all that. anyway to fix it?

  NEVER begin to solve this problem with KB307545, and if you have no disk, you won't get a lot anyway.

  I guarantee engineers from Microsoft technical support that I can recreate this problem to approximately, half break you in 1 minute your XP CD and then you put challenge to fix it without the help of KB307545.  It is unlikely that the manufacturer will send you an XP installation disc.

  Looking at HP/Compaq, Dell and IBM just today, they say generally that they have stopped shipping XP CD in 2005 (6 years ago) and you can't order them on their website or through the support.  But sometimes you can get a part number and buy a CD to install XP from third-party suppliers to find research on the Internet.  Prices range from $49 to $ 200 USD.

  Knowing this, maybe it's time to STOP suggesting how to contact the vendor for installation of XP Media?  It's a good 'out' when you don't know what to do, but this isn't a useful suggestion.

  It could facilitate a resolution of the problem faster with less cycles message if you are trying to tell us you see the exact error message.

  Is this something like this:

  Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  If you want to use Ubuntu or something similar to copy your important files to a safe place, it is a good idea, but you should always be able to repair your XP system.

  What you need to do is to make a bootable CD of XP (no XP media required) Recovery Console to run chkdsk /r on your system.  Here's how:

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• It is error to open my Photoshop and HAVE. I'm trying to uninstall them, but now I can't install it. Someone knows why?

  It is error to open my Photoshop and HAVE. I'm trying to uninstall them, but now I can't install it. Someone knows why?

  Click analytical option over details or error, it will open description of the error in the browser, sometimes it will be also empty.

  Let me know,