I get BSOD for multiple IRP complete application

Similar Questions

• Satellite Pro L770 restarts - multiple irp complete application error

  Hello

  I have a strange problem, I am running Windows 7 and, occasionally, when I sign out and close my laptop it seems to restart itself and displays a blue screen with "mutiple_irp_completerequests" on this subject.
  Then I pressed the on / off to make it stop.

  Is this a major problem and what is the cause and the fix for it?
  Thanks for any help on this matter,

  PADI.

  Found this error on the Microsoft page:
  ' Display the Error Message Stop 0 x 00000044 Multiple_IRP_Complete_Requests "during a shutdown or standby operation
  http://support.Microsoft.com/kb/294876

  This problem can occur because a driver asked a bunch of request of I/O (IRP) must be completed, but the package is already completed.

  It seems that there is a problem of driver somewhere

  You have all 3 devices installed or connected to the laptop?
  Might be possible that these 3rd device and software cause this problem.

  Some people in the world wide web have reported problems with Norton and some 3rd party software. This problem was solved by uninstalling Norton

• Get reminders for KB2446708 already completed eventhough the update security update

  Original title: KB2446708 security update

  I keep getting reminders on the above update even if I have already completed the update.

  Hello

  1. have you checked if it is installed successfully?

  You can read the Microsoft article below and try the steps to solve the problem successfully installed update offered again in Windows updates.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  You can also download the stand-alone update package and try to install it:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=91aa6772-4811-4a58-9bc0-8aa271ed99df&displaylang=en

  Also check out the link:

  MS11-028: Description of the update of security for .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2: April 12, 2011

  http://support.Microsoft.com/kb/2446708

  Hope this information is useful.

• content of display problems sometimes traces of the previous window/application XP gets stick for him working window/application

  In windows XP, the traces of previous window/application sometimes stick to her working window/application, can you give me a solution to this problem, I use SP3...

  I will wait your answer with a way to solve the problem.

  Hello

  You can try to update the video card drivers and check if that helps.

  See the links below for more information.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Information about the hardware devices for Windows XP drivers

  http://support.Microsoft.com/kb/319908

• BlackBerry Smartphones KB24874 ' completed Application: MPTT refused approval for communication cross-application. "is displayed on the BlackBerry smartphone

  1st, I started having issues, try to connect to my voicemail with T - Mob. I called them, they had to re - setup my voicemail and (update of the settings for my Blackberry to connect properly saying this would happen over a period of 4 hours). They got my answering machine until tonight here. Later this week I get a notification there are applications that have are updates available, so I go to the app world. Things a then from bad to worse - apps I tried to update, new to download and try checking 'My World', I started having the (40760 out of line device) and another code error telling me to connect? >

  Do a battery pull and when the phone back up I get error message "completed Application: MPTT was denied permission to cross-application communication.'"

  My phone is an unlocked Tour 9630 from Verizon, and I have a monthly plan with TMobile, including the data packet.

  Lookiong after this error code (KB24874) it leads me to believe that there is some kind of conflict with the "push to talk" Service Verizon which is not supported by T-Mobile. This problem started when I called T-Mobile to the difficulty of voicemail and they have really no incentive to help me because I have an unlocked phone that they do not initially sell for me...

  It is a basic app and I can't remove it... Can I disable or restrict its permissions to stop this conflict? Is there anything I can do wireless or a parameter to change since I don't have a computer at home - only at work?

  And he says I have to contact Blackberry technical support for help on this... Try to find a way to contact the Blackberry Support basically sent you here on the forums...

  Oh wise and powerful Blackberry Guru and Experts here - can someone help me?

  YAY! I fixed it! I got tothinking on these permissions and I went back to them and reset them to "refuse" to "default" (who put them to 'allow') and attempted to access app world and it worked - everything worked!

  MPTT is the name of the libraries in the application 'push to talk' and I guess it still needs to set to 'allow' in same permissions if the app is not supported by TMobile.

  Thanks for the forums. Even if no one responded, have a place as it has helped me to analyze my own of all the posts that I have sought.

  Hope this helps someone if they have the same problems a day

• Our application for multiple applications

  Hello... I have now read a lot of pages on the accounts of the Application... And I still don't understand.

  We want to publish a magazine (lets call the Magazine), on Store (iPad, iPhone), Google play and and Amazon.

  The Magazine, now has 3 Folios. iPhone, iPad and Android (maybe two Android versions for 600-800px).

  They where all created with the Adobe ID "userA", until we bought the license of DPS.

  First, we released an iPad only app of Folio unique works with that.

  Now, we would like to roll over other applications and are now running against a wall...

  What are the next steps here? I created a user (UserB) as a test user, to get the Android app to show Folios and noticed, the only way to get the Folio, had for UserA to share his Folio finished with UserB. Open the Producrer Folio as UserB and copy over Folio. It copied the files would then appear on the Android App.

  Then we had to fix the part in the finished Folio and did this on wear, since otherwise, it will add a link to all items.

  The problem was, we now had to do the same (copy to UserB) and now had 2 Folios in the application. If this can be the solution.

  We now use the copied version to work on the portfolio, instead of the original one.

  Which would be a lot of work, restoring links... But would always be ok...

  What will be intresting, is we have to play Google and Amazon. Now should I create another user (UserC) and to share the final Folio with this user, making him copy on his account and have the same folio 3 times then make changes on all 3 of them?

  What about the iPad, iPhone Viewer... We put two slips in the 'user '?

  I'm really confused now...

  Welcome - Volker

  Hi Volker,

  A delicate thing on the management of the accounts is that a delegate account must be 'new' - may not have been verified to work with DPS. In your example, the '[email protected]' address you used before cannot be added to your new account. Here's what you want to do to build a new iOS app:

  1. create a new account to e-mail such as "[email protected]." Do NOT yet use this account to connect to DPS.

  2. use an administrator account to connect to the DPS dashboard > account management tool. (Also assign this account the role of "DPS App Builder" unless you want to use a different account for multiple applications.)

  3. create a new account delegate for the email account (in this example, '[email protected]').

  4. share the folio from your old account to the new and then use the producer of Folio to copy the folio to the new account. (Folio copied doesn't have to be reprinted when if you share/copy on the same computer).

  Defines you for your iOS (iPhone and iPad) application. You can then connect to DPS App Builder and specify the new account delegate as the title ID to build a multi-folio app or subscription App (I guess you want to convert the simple editing app multi-folio application).

  When you create applications for the game of Google or Amazon, you have the choice. You can use the same account to iOS, or you can create a different delegate account (for example, "[email protected]") and assign the Application role. You can then share/copy of iOS folios and modify them to viewers Android, or you can use this account to create new fact sheets (1024 x 600/1280 x 800/1920 x 1200, etc.). Personally, I prefer to use separate accounts for iOS and Google Play/Amazon. See http://blogs.adobe.com/indesigndocs/2012/10/creating-dps-folios-for-android-devices.html.

• Why do I get emails intended for person with completely different e-mail address?

  Why do I get emails intended for person with completely different e-mail address? some of the Emails are addressed to names nowhere near the same spelling to my address and I always get them

  You CAN receive email if your email is added to the BCC list [1].

  Most spammers use this medium to spam others.

  [1] http://en.wikipedia.org/wiki/Blind_carbon_copy

  See you soon!

• When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.

  Problem Windows install

  When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.

  I looked at several forums and tried cleaning patches, etc they suggest.  I also tried to download Windows Installer 4.5 but keep says "the update does not apply to my system" (I tried all.)

  I am running Windows Vista and have downloaded the service pack 2 (one remedy suggestions!)  Someone out there has a solution?

  Hello, Atwitsend...,

  Try to repair.
  Go into Add Remove Programs, then select Apple Software Update > change > repair.

  If this does not work, try to uninstall. .

  Remove and reinstall ITunes, Quicktime, and other software components
  http://support.Apple.com/kb/HT1923

  Download the iTunes Installer and save it on your desktop.

  http://www.Apple.com/iTunes/download/

  Try to install iTunes using the installer that you saved.

• When XP is "windows xp for first use mode setting" it loads to 99% and then I get the message "unable to complete Setup.

  I upgraded my 64 new image computer windows 7 Home premium Edition to windows 7 using the upgrade anytime professionoal.  I downloaded the fix for quad core to use virtual pc and windows xp mode.  When XP is "windows xp for first use mode setting" it loads to 99% and then I get the message "unable to complete Setup.  I service request # 1182160056 but the phone lines of microsoft do not work.  Any suggestions?

  Have its possible that this is a download corrupted Windows XP mode, you tried to download it again and see if it works? Also, make sure that you first install Windows Virtual PC.

  Click Start, type: enable or disable windows features

  Press enter on your keyboard

  Scroll down and make sure that Windows Virtual PC is checked.

  Click OK

  Restart if prompted.

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

• Can I purchase a single license for multiple software? Buy one for a single application, buy another one for another, etc.

  Can I purchase a single license for multiple software? Buy one for a single application, buy another one for another, etc.

  You can purchase the license but on different emails if you need to use them on multiple computers. From an e-mail, you can install software on both computers. These two computers can be Windows, Mac OS, or everyone. If you install on a third computer, you will be asked to turn off this feature on the other two computers. You can then re-enable one of the two previous computers and use Cloud Creative apps on it.

  Kind regards

  Hervé Khare

• I just upgraded to the Plan complete creative Cloud, but I also had a plan of individual photo, the upgrade to the PAC will cancel the individual level, or what I have to cancel and how can I make sure that I do not get penalized for cancellation?

  I just upgraded to the Plan complete creative Cloud, but I also had a plan of individual photo, the upgrade to the PAC will cancel the individual level, or what I have to cancel and how can I make sure that I do not get penalized for cancellation?

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  First of all, such that added to your message of origin by a Mod, please do not post the same question twice

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <==> NOTE DAYS AND TIME

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Is it possible to get the adobe software CC on a disk for multiple installations instead of download from the internet?

  Is it possible to get the adobe software CC on a disk for multiple installations instead of download from the internet?

  You can download the installation direct offline files:

  http://prodesigntools.com/Adobe-CC-2014-direct-download-links.html

• HP k207: need for HP simple pass application and my driver works

  When I use my fingerprint sensor, it works, but does not open the application HP Simple pass. Where can I get the file from downloading the Application? Please help me. I'm not able to use the sensor to get into my laptop so I type the password completely. Please help the technicians HP

  Hello @Sudarshan22,

  Welcome to the HP Forum community!

  I came across your post and wanted to help you find the software for your HP Envy 15-k207.

  I found this page of the driver for your notebook series:

  Laptop HP ENVY - 15 t-k200

  You can find the software, or install the Version of the HP SimplePass Identity Protection Software: 8.01.46 Rev.A using this package.

  sp71729.exe

  Thank you very much, I hope this download helps.

  If you found this information useful, click on the thumbs up!

• When I start my computer, I randomly get BSODS!

  Hello

  So I'm running Windows 7 Ultimate and when I start my computer for the first time the day I get BSOD. I tried to completely reinstall Windows and it still happens. This often happens when I open Chrome (or another browser) and watch YouTube videos or go on Facebook.And I can't get rid of it. He usually appears for 3 - 4 times and then I can do what I do without showing. I also tried to type the error code it gives but it changes every time. I hope that someone will help me.PS sorry for the bad gramma.

  Thank you

  Alen Hello,

  Which may be caused by a hardware or software. We offer you to visit this link to get more information in the resolution of Windows 7 BSOD.

  Kind regards

• Code unique appl and icon for multiple operating systems?

  All,

  I'm new to the BB appl development.  I was finding this forum very useful, although I have some fundamental questions for which I can't find existing threads...

  We need to create basically just a web app launcher (possibly with the overview icon) to get out by using BES.  We have a range of features and versions of OS (from 4.1) in support.  My questions have to do with how support these different devices and OS versions.  I hope I can have one application to get out for all devices instead of having separate applications to push to the respective devices based on the device or operating system.

  So my current thinking is to compile the application targeting the OS 4.1, so will it work on that and all the new versions of the OS.  As far as I can tell (not having completely tested) the same code (to launch the browser and the overview icon support) for OS 4.1 is compatible up to all new OS versions. This approach, compilation on OS 4.1 only, seems reasonable?

  My second concern relates to the icons that different devices prefer icons of different sizes.  What's usually managed?  Generally include you all files of icons of different sizes in the construction and through the code click on the appropriate icon based on detected device?  Or do you usually come out with a file of unique icon with dimensions that have air pretty much ok in all devices?  Some compromise between the two?

  Thank you.

  Code of Blackberry is compatible before not retro-compatible. So, if you are developing an application with older JDE it can run on the new OS, but not the reverse.

  Also see this article:

  What is - an appropriate version of the BlackBerry JDE
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800738/800901/What_Is...

  And on the icon I don't think that any device have a preference of dimension.

  You can use any reasonable size (ex: 50 * 50) for icon which will look almost the same in all devices.

  Concerning

  Bika