I get "the data is invalid." when trying to reactive my windows 7 ultimate

Similar Questions

• I get the error 0xC004E003 code when I try to activate Windows 7 Ultimate 64-bit. Someone knows how to solve?

  I get an error 0xC004E003 code when I try to activate windows 7 ultimate 64 bit, someone knows how to fix?, have read and tried everything what others had said to others who have the same problem and nothing

  You buy a genuine Windows 7 license. The copy of Windows 7 Ultimate, you have installed is an OEM SLP license that should only be preloaded with a new PC. You seem to have installed a copy of Windows 7 Ultimate that uses an activation exploit that bypasses the product activation.

  We know that it is because the BIOS date:

  20080909000000.000000 + 000

  Windows 7 was released in 2009, the date of your BIOS says 2008, which means probably that your system is provided with Windows Vista or Windows XP.

  In addition, he is a well known Windows 7 Ultimate license which has been used all over the web:
  Windows product key: *-* - YG69F - 9M66D-PMJBM

  Do a search on the web.

  Thus, you must either charge your version of Windows that came on your computer (Vista or XP) or consider purchasing a license of Windows 7 genuine.

  Windows 7 - version comparisons:
  http://Windows.Microsoft.com/en-us/Windows7/products/compare-editions

  MS Windows 7 store price:
  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

• I get the error code 80070020 when trying to install (KB2507618).

  I have Vista Home Premium. I get the error code 80070020 when trying to install (KB2507618).

  I tried all the troubleshooting steps below and still no luck. I installed some other updates, today, August 19, 2011.

  Do I need to KB2507618 that came out in April of this year, or is it is replaced by an other update and or cumulative update?

  • Summary
  • Symptoms of the problem
  • CAUSE
  • Methods to solve the problem
    • Method 1: Restart your computer and install updates
    • Method 2: Start the computer in safe mode with networking support and install updates
      • Windows 2000, Windows XP or Windows Server 2003
      • Windows Vista, Windows Server 2008, or Windows 7
  • Advanced Troubleshooting
    • Method 3: Perform a clean boot of the computer and then install the update
      • Windows 2000, Windows XP or Windows Server 2003
      • Windows Vista, Windows Server 2008, or Windows 7
    • Method 4: Temporarily disable spyware and antivirus software
    • Method 5: Temporarily disable firewalls
      • Disable Windows Firewall in Windows 2000, Windows XP and Windows Server 2003
      • Turn off the firewall in Windows Vista, in Windows Server 2008, or in Windows 7

  Read the little free support in the Article:
  http://support.Microsoft.com/kb/2507618

• I get the error code 646 when I try to install windows updates.

  I get the error code 646 when I try to install windows updates. I have Windows Vista Home Premium. I disabled my firewall and I still get the error code 646.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I get the following error message when you try to install Windows Live Essentials for Windows 7-64-bit: __One installation files seems to be corrupted. HR:0 x 80070003

  I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
  One of the installation files seems to be corrupted. HR:0 x 80070003

  Hello Amawob,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  You cannot install some programs or updates.

  http://support.Microsoft.com/kb/822798

  Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  That should solve the problem for you.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• I get the error number: 0x80072EE2 when I try to run windows or microsoft update under Win xp

  I get the error number: 0x80072EE2 when I try to run windows or microsoft update under Win xp

  Hello

  I suggest you try all the steps in the following article.
  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates.
  http://support.Microsoft.com/kb/836941

  I hope this helps.

• Get the error code 646 when trying to install windows updates.

  Continue to receive the 646 code error when you try to install windows updates

  See: http://support.microsoft.com/kb/2258121 TaurArian [MVP] 2005-2011-implementation to date of Services

• I get the error code 0x800706BE when trying to update to service pack 3 installation did not finish. and I don't have the installation CD

  I get the error code0x800706BE when trying to modernize the service pack 3 installation did not finish. and I do not have the original installation disc

  Go here and download the complete file of the OFFXPSP3 edition: http://www.microsoft.com/en-us/download/details.aspx?id=23334

  This page scroll down and read this paragraph: to install SP3 without the original Office XP CD

• I get the following error message when trying to format drive C: "Windows cannot format this drive. "Leave all utility disc or other programs that could use this drive.

  Original title: how to format drive C?

  I have Windows XP installed on my C drive, but due to the lack of hard drive space, I installed another Windows XP on drive D. Now when I try to format the C drive of the new installed Windows, I get this error:

  "Windows cannot format this drive. "Leave all utility disc or other programs that could use this drive.

  Hello

  Check if you are able to format drive C in a clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Warning: Formatting the drive will remove or erase all the data on that drive.

• I get the error code 80080005 when trying to update windows

  While searching for updates using Windows Update, I get the following message from Windows Update error 80080005:

  Windows could not search for new updates
  An error occurred when the new updates for your computer.
  Error (s) found:
  Code 80080005 Windows Update encountered an unknown error.

  I have windows vista home basic service pack 2

  System type 32-bit operating system.

  Hi Lee,.

  Please contact the Microsoft community. We will be happy to help you with your concern.

  According the description, you are unable to install the Windows updates as you get error 80080005.

  1. you are looking for any specific update?

  2. did you of recent changes to the computer before the show?

  I've provided methods to fix the Windows Update the question. Carefully follow each method. If a method does not work, go ahead with the methods following to solve the problem.

  Method 1: Run the fixit available in the link below to reset windows update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Now, you can try to install these windows updates fails manually from the link below Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 2: Turn the computer in a clean boot state in order to verify the conflicting application. Try to install the updates:

  You can manually install the update (numbers KB) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After installing windows update, follow step 3 in the link provided to return the computer to a Normal startupmode.

  Method 3: Follow the instructions in the link:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Note 1: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Note 2: The data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

  Note 3: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Please follow these recommended steps, review the additional information provided and post back if you still have the problem. I will be happy to provide you with additional options.

• get the 8024000 error code when trying to install sp2 to vista tried about 6 times

  Windows says I have 1 important update, when I try to install the update I get an error code 8024000

  I installed sp1 without problem, but have tried about 6 times with sp2 and nowhere

  Hello

  Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

  You can not install Vista Service Pack 2 and get the error 8024000.

  If you receive the error Windows Update 8024000, it means that Windows Update is unable to read a file (update manifest) that is required for installation.

  I suggest you follow the steps in the site:

  Windows Update error 8024000

  http://Windows.Microsoft.com/en-in/Windows-Vista/Windows-Update-error-8024000B

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• Get the 0xC004C0003 error message when you try to activate Windows 7 using the old product key

  Windows 7 error code 0xC004C0003

  I reinstalled windows 7 on my old machine using a copy of the operasting system genuinr.
  After several attempts to activate it by using my old product key, I get the message error code
  can you tell me why this is the case, and in any case I can resolve the issue quickly

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Activation error: 0XC004E003 http://support.microsoft.com/kb/938450

• I get the error code 80070017 when trying to update windows.

  My computer has Windows Vista on it, and before installing the update I get a message saying that Windows crashed. When I search the updates, I see that I need, but it will not download. I've tried both solutions listed on the forum of service (restart the computer while searching for errors and creating a Notepad with an order in this regard document). Help please!

  0 X 80070017-2147024873 - ERROR_CRC
  Data error (cyclic redundancy check).

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070017.
  http://support.Microsoft.com/kb/956704

  See also: http://windows.microsoft.com/en-AU/windows-vista/Check-your-hard-disk-for-errors

• I get the U43M1D207 error message when trying to download update the extensions Manager

  Hello world

  I have a second cam from Nikon, the D7200. I also use the D800. I mainly edit my photos with RAW file.

  I tried today to open a RAW in PS and received the message that he does not recognize this format. I did an update on raw, but still it does not work. When I try to update the extensions Manager, I get this message: U43M1D207. What is the problem, how can I solve this problem. It would be terrible if I can't use the RAW data within the new cams.

  Thanks for your help, you

  You can't update cs5 cr 9.

  You can use dng format converters, however.

  DNG converters:

  Win
  Mac

• Get the error code 80070005 when trying to get windows update for HP w2207 Monitor wide screen.

  I have a Compaq Presario SR5410F computer with a large screen Hp w2207h with windows home premium and service pack 2. The computer is about 1 year and 3 months. About 6 months ago, I have an update of windows for my monitor and it failed several times when I tried to install it. I got ahold of someone at microsoft but never got an answer to my problem. The person finally told me to hide the update so it wouldn't keep trying to install. Now I have another update to my monitor and it will not be installed. All other updates installed fine. When I try to install, I get failed and the 80070005 error code.
  Anyone have any ideas on how to solve this problem? Sure would appreciate it.

  The post directly above it, the journal of Kateyes, has the following questions:

  1 looks like there is a proxy or some sort of 'intermediary' between the Windows Update software and internet.  Usually, it is a kind of dial-up, or download accelerator software or maybe internet software such as content filtering (parental control).  If you have any of these please disable and try again.

  2. you may have a proxy configured incorrectly.  Open Internet Explorer and click on Tools / Internet Options / Connections / LAN Settings button.  Here, uncheck the "Use a Proxy Server" if it is checked.  Otherwise, uncheck the box for "Automatically detect proxy settings" and close IE and try again.

  3. the problem could be another connectivity type of questions, please try the suggestions in this article:

  http://support.microsoft.com/kb/836941 - make this one article first, very good on this type of error
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072efd

  I hope this helps.  The question is purely related connectivity, so something related to the internet connection does not work correctly.  It probably isn't and issue with your ISP, but more with the settings of Windows or other applications installed on your computer that are at the origin of the conflict. If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!