I get this error msg - permission denied for < Web page > get XPCComponents.classes property

Similar Questions

• Why do I get this error:? Permission denied for my {URL} call the UnnamedClass.toString method on.

  When I click on links to external sites on my site, I get the following error, like 5 times, and yet, it always opens the other site after clicking the OKs. For example, click on "Host Hotel' on the left NAV.

  Error: Permission denied to call method UnnamedClass.toString on.

  URL of affected sites

  http://www.TGIF-classic.org

  Norton Toolbar is the culprit. I work with Norton to get addressed.

• Hi, I get this error msg everytime restarts my system (with Windows Vista), pls help: ___windows cannot install important updates: __1) __2 KB978542) KB971644__3) KB974470

  Hi, I get this error msg everytime that restarts my system (with Windows Vista), pls help:

  Windows cannot install the important updates:
  (1) KB978542

  (2) KB971644
  (3) KB974470

  (And Norton) McAfee applications are known to not uninstall (or upgraded) themselves.

  1. download the McAfee Consumer Product Removal, save it to your desktop tool:http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. for good measure, reset IE now by http://support.microsoft.com/kb/923737

  5. now to reset Windows Update by...

  How to reset the Windows Update components?
  [Access KB971058 via Internet Explorer (32-bit) only; Run the difficulty in the default and aggressive modes]
  http://support.Microsoft.com/kb/971058

  6. restart once again & test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After installing CF10, I get this error msg, "cannot display this page".

  After installing CF10, I get this error msg when I try to access the page administrator, "cannot display this page".

  I am on Window Server 2003, 64-bit with IIS 6.0.

  Before I installed CF10, I uninstalled CF8.

  Thank you Charlie for your entry. Len and we have understood, whether an authorization to issue mainly. After you have configured the permissions, we found later that IIS is configured in 32-bit mode (as suspicious as well by you) and CF is running in 64-bit mode.

  @Len: Please refer to http://www.microsoft.com/technet/prodtechnol/WindowsServer2003/Library/IIS/405f5bb5-87a3-4 3d 2-8138 - 54b75db73aa1.mspx? mfr = true

  Kind regards

  Anit Kumar

• Error: 13: permission denied when lsnrctl start as root

  Hello.

  I ve installed Oracle 10.2.0.5.0 on Oracle Linux 6.5

  I ve created tnsnames.ora, lisntener.ora, and sqlnet.ora by command line, so a database that is in the State open.

  I can connect by SqlPlus without any problem.

  This is my setup:

  Listener.ora	SQLNET.ora	tnsames.ora
  LISTENER = (DESCRIPTION = (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1)) (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521)) ) SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = PLSExtProc) (ORACLE_HOME = home/oracle/oracle/product/10.2.0/db_1) (= Extproc PROGRAM) ) (SID_DESC = (GLOBAL_DBNAME = MyLinuxDB) (ORACLE_HOME = home/oracle/oracle/product/10.2.0/db_1) (SID_NAME = MyLinuxDB) ) ) LOCAL_OS_AUTHENTICATION_LISTENER = OFF	NAMES. DIRECTORY_PATH = (TNSNAMES, ONAMES, HOSTNAME) SQLNET. AUTHENTICATION_SERVICES = (none)	MyLinuxDB= (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = MyLinuxDB) ) )

  When I run with the user Oracle lsnrctl services I have this output:

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1)))

  Summary of services...

  Service 'MyLinuxDB' has 1 instance (s).

  Instance of 'MyLinuxDB', status UNKNOWN, has 1 operation for this service...

  Managers:

  "DEDICATED" set up: 0 denied: 0

  LOCAL SERVER

  Service 'PLSExtProc' has 1 instance (s).

  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...

  Managers:

  "DEDICATED" set up: 0 denied: 0

  LOCAL SERVER

  The command completed successfully

  But if I type tnsping MyLinuxDB having the same Oracle user I have this:

  Use settings files:

  /Home/Oracle/Oracle/product/10.2.0/Db_1/network/admin/SQLNET.ora

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = MyLinuxDB)))

  AMT-12541: TNS:no listener

  Another strange behavior is that I can stop or start the listener with the Oracle user, but if I try as long as user root I have Don t have permision to launch, I can only stop it as root.

  lsnrctl stop [root] #.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1)))

  The command completed successfully

  [root] # lsnrctl start

  From /home/oracle/oracle/product/10.2.0/db_1/bin/tnslsnr: Please wait...

  TNS-12546: TNS:permission refused

  AMT-12560: TNS:protocol adapter error

  AMT-00516: permission denied

  Linux error: 13: permission denied

  Can someone help me understand what I am doing wrong?

  Concerning

  You can provide the IP address instead of the host name "localhost" and check

  Confirm also that IP also available on file/etc/hosts

  also share the output of command below

  ps - ef | grep lsnr

  If several found lsnr then you can kill the lsnr and start the listener and check status lsnrctl.

• run_job fails with permission denied for an executable work as a non - dba user

  I am running Oracle 10.2.0.4 on RHEL 5.5 32-bit and seeks to convert some of Oracle Scheduler cron tasks, but get a permission denied error during the execution of the work.
  
  To simplify things as much as possible, the below shows a work with a call to an executable shell script. The shell script was simply a calendar of Unix command, however, so it works from the command line, as well as the command-line as 'oracle' user, I get the following error:
  
  TEST: OPS$ BATCH_USER > exec dbms_scheduler.run_job ('my_test_job');
  BEGIN dbms_scheduler.run_job ('my_test_job'); END;
  
  ERROR on line 1:
  ORA-27370: slave to the job could not launch an EXECUTABLE type work
  ORA-27300: dependent operation of the OS system: access to the wrapper of extjob failed with status: 13
  ORA-27301: OS Error Message: permission denied
  ORA-27302: an error occurred at: sjsec 3
  ORA-06512: at "SYS." DBMS_ISCHED", line 150
  ORA-06512: at "SYS." DBMS_SCHEDULER', line 441
  ORA-06512: at line 1
  
  I noticed that if I create work under another account Unix which is the dba group and update the externaljob.ora run_user and run_group = s/n, the task runs without error.
  
  I assume that it is possible to run executable tasks in o/s as a group of users outside the dba (or oinstall)?
  
  Below are the details of what I did. If you would be grateful if someone can point me in the right direction. My apologies if I'm missing something obvious here...
  

  Create simple job
  
  TEST: OPS$BATCH_USER > !cat create_test_job.sql
  begin
    dbms_scheduler.create_job (
      job_name            => 'my_test_job',
      job_type            => 'EXECUTABLE',
      job_action          => '/home/batch_user/dba/v2_dba_tasks/run_script.sh',
      start_date          => NULL,
      repeat_interval     => 'freq=daily; byhour=8; byminute=30',
      end_date            => NULL,
      enabled             => TRUE);
  end;
  /
  
  TEST: OPS$BATCH_USER > @create_test_job
  
  PL/SQL procedure successfully completed.
  
  File permissions...
  -rw-r--r-- 1 root oinstall 1537 Feb 28 13:38 /u04/oracle/product/10.2.0/db_1/rdbms/admin/externaljob.ora
  -rwsr-x--- 1 root   oinstall 871282 Aug 22  2010 /u04/oracle/product/10.2.0/db_1/bin/extjob
  -rwx------ 1 oracle oinstall 871282 Aug 22  2010 /u04/oracle/product/10.2.0/db_1/bin/extjobo
  -rws--s--x 1 nobody nobody   871322 Jan 28  2009 /u04/oracle/product/10.2.0/db_1/bin/extjobO
  -rwx------ 1 oracle oinstall 871322 Jan 28  2009 /u04/oracle/product/10.2.0/db_1/bin/extjoboO
  -rwxr-x--x 1 oracle oinstall  29910 Aug 22  2010 /u04/oracle/product/10.2.0/db_1/bin/extproc
  -rwxr-x--x 1 oracle oinstall  30130 Jan 28  2009 /u04/oracle/product/10.2.0/db_1/bin/extprocO
  -rwxr-xr-x 1 oracle oinstall    327 Jan 28  2009 /u04/oracle/product/10.2.0/db_1/bin/extusrupgrade
  
  
  For testing, I'm just doing a Unix calendar command...
  [batch_user@test v2_dba_tasks]$ cat run_script.sh 
  #!/bin/sh
  
  /usr/bin/cal
  
  
  Contents of $ORACLE_HOME/rdbms/admin/externaljob.ora...
  [root@test admin]# grep '^run' externaljob.ora 
  run_user = batch_user
  run_group = comp
  
  The Unix account is not in the dba or orainst group ('comp' group only).
  
  Run from O/S...
  [batch_user@test v2_dba_tasks]$ ./run_script.sh 
     February 2011    
  Su Mo Tu We Th Fr Sa
         1  2  3  4  5
   6  7  8  9 10 11 12
  13 14 15 16 17 18 19
  20 21 22 23 24 25 26
  27 28
  
  Run as 'oracle' user...
  [oracle@test v2_dba_tasks]$ ./run_script.sh 
     February 2011    
  Su Mo Tu We Th Fr Sa
         1  2  3  4  5
   6  7  8  9 10 11 12
  13 14 15 16 17 18 19
  20 21 22 23 24 25 26
  27 28
  
  But running from scheduler results in error...
  TEST: OPS$BATCH_USER > exec dbms_scheduler.run_job('my_test_job');
  BEGIN dbms_scheduler.run_job('my_test_job'); END;
  
  *
  ERROR at line 1:
  ORA-27370: job slave failed to launch a job of type EXECUTABLE
  ORA-27300: OS system dependent operation:accessing extjob wrapper failed with status: 13
  ORA-27301: OS failure message: Permission denied
  ORA-27302: failure occurred at: sjsec 3
  ORA-06512: at "SYS.DBMS_ISCHED", line 150
  ORA-06512: at "SYS.DBMS_SCHEDULER", line 441
  ORA-06512: at line 1

  Hello

  The run_user specified in externaljob.ora don't have to be a member of the oinstall group.

  I think you can run into a problem specific to run_job with use_current_session-online set to true when the local OS user running sqlplus is not a member of oinstall.

  The same error occurs with a background task run (for example use_current_session-online fake)? Occur if you are using sqlplus from another machine?

  Thank you
  Ravi.

• Error number: 70 Error Description: permission denied

  Hi all
  I just finished to set up a new development environment.
  I created a new application and then I registered it.
  Now, I'm trying to load the metadata, rules...
  But whenever I try to load or extract something (what ever the metadata, rules, WDEF...) HFM returns me the following error:
  
  Error number: 70
  Error Description: permission denied
  Source: Microsoft VBScript runtime error
  Page Occurred:/hfm/DocMgr/ExtractItems.asp error (if I try to extract something)
  
  It doesn't happen when I try to load something of the workspace so that if I load that is metadata on the client, it seems to work correctly.
  
  What can I do to solve the problem?
  
  Pleas help me! It's urgent!
  
  Thanks in advance
  Giacomo

  Hi Giacomo.

  See below:

  * Financial management error "Error number: 70 Error Description: Permission denied ' when load or save objects [596447.1 ID] *.
  --------------------------------------------------------------------------------
  Last updated January 17, 2011 Type PROBLEM status PUBLISHED
  --------------------------------------------------------------------------------
  Applies to:
  Hyperion Financial Management - Version: 3.5.1.0.00 to 11.1.1.0.00 - version: 3.5 to 11.1

  Symptoms:
  Web error message appears during the loading or saving of data entry forms:

  Error:
  An error has occurred. Please contact your administrator. "
  Error number: 70
  Description of error: permission denied
  Error source: microsoft VBScript runtime error
  Page Occurred:/hfm/data/WebFormBuilder.asp error

  This error can also be seen run any load or save the task of HFM, for example loading log data, although the Page on which error occurred will change depending on what task is underway.

  * Cause: *.
  This problem is caused by the NTFS permissions on the folder to transfer files on the Web of HFM server and can be verified by giving everyone in the control group full access to the FileTransfer file as a test. Normally this question will require the Internet Guest account and the IIS user launch to have full access for the file to transfer files on the HFM Web server.

  * Solution: *.
  On the HFM Web server

  Check the value of the FileTransferFolderPath value data in the Windows registry:
  HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions\Hyperion financial Management\Web
  In Windows Explorer, navigate to the folder you specified in the above registry, right click on the name of the folder and select Properties, then the Security tab.
  Give full control permissions to the account invited Internet and process account IIS to launch users.
  Click on apply.
  If the modifications above do not resolve the user of HFM DCOM assignment question try as the identity of the anonymous access in IIS:

  Start the Internet Information services Manager console
  Explorer the DefaultAppPool, right-click and select "Properties".
  Go to the "Identity" tab, select "Configurable" and change the user identity to match that of the HFM DCOM user used when installing HFM.
  Click on apply and OK
  In addition foret forest down to the Web Site of HFM, right-click and select "Properties".
  Go to the "Directory Security" tab
  In the "authentication and access control', click 'change '.
  For "anonymous" access change the username/password of the HFM DCOM user credentials
  Click OK, OK
  Restart the IIS services

  Send me a note if you continue to experience problems after you apply this configuraration.

  G'Luck
  -David

• TNS-12518 TNS - 12546 Linux error: 13: permission denied

  Hello
  I'm really sorry to disturb this forum with this stupid question but I am really new to oracle and I don't really know what to do in this case.
  recently, I installed oracle 10g release 2 on a box of Centos64bit.
  I was able to complete the installation, and apparently everything is working relatively well since im able to connect to oracle with the oracle user, I created using sqlplus.
  now the problem im is that im trying to connect to oracle with sql developer, but I get this message: "had at least one appeal of reading:
  I checked the logs and display is the following:
  
  TNS-12518: TNS:listener could not hand off client connectionl
  TNS-12546: TNS:permission refused
  AMT-12560: TNS:protocol adapter error
  AMT-00516: permission denied
  Linux error: 13: permission denied
  
  Of course, the problem has to do with permissions.
  given that I don't really know where to put the permissions. what I've done so far is affecting permission 755 following to the network folder of the jump oracle, which will solve the problem, but it didn't.
  I also set the following parameter:
  TCP.validnode_checking = no
  the sqlnet.ora, file, but that has not worked.
  
  Could someone please help me with this!

  Hello

  Verify that this listener is running under the same user as the database instance.

  HTH Mathias

• I have 5 "MY BACKUP" folder on my drive C in 2008. How can I remove the old ones. Receiver error MSG "Access denied" when you try.

  I have 5 "MY BACKUP" folder on my drive C in 2008. How can I remove the old ones. Receiver error MSG "Access denied" when you try.

  Hi PJG_918,
   
  To resolve this problem, you must turn off Simple file sharing and then take over the folder.
   
  Here is an article that will explain the procedure to the same thing:
   
  "Access denied" error message when you try to open a folder

• FB suggested messages UOENO life available once Microsoft Windows7 error msg w/contact # for Microsoft Tech appears warning you do not shut down your computer.

  21/04/16 suggested that Facebook messages 'UOENO Life' husband requires to be buried with all his money [read more]... once consulted a Microsoft Windows7 error msg # w/contact for Microsoft Tech appears warning you don't not to shut down your computer, but calling an 800 #.  Recognized this as a scam online and immediately off computer manually and restarted without any problem.  Tried to access this site suggested FB messages receiving three times even put in custody, but with a Microsoft 800 different number to talk w/a Microsoft Technician to fix the problem. The figures were: 855-464-6618; 888-983-0061 and 855-983-6515. ALL three times stop us our computer and restarted. Tried to contact Microsoft to report the scam but could not navigate a number or CHAT to personally talk w/Tech. attempt to submit info scam online but box for "Details" not big enough to contain information to be submitted. We are trying to contact FACEBOOK to present the activities of fraud is made on their public domain. BE AWARE that generic "suggested messages on FACEBOOK may be a fraudulent link for phishing opportunities for criminals to access your computers and financial information online!" REPORT any such activity as soon as possible businesses are used to help others to obtain your personal information for fraudulent activities.  SOMEONE HAS ANY INFORMATION TO CONTACT DIRECT FOR MICROSOFT OR FACEBOOK?

  Hi Sandy,

  Thanks for posting your query in Microsoft Community.

  It is regrettable that you receive this message, however, you can report a scan online with Facebook to: report of online scams

  Alternatively, you can refer to the information provided in the article below on scam using the Microsoft name fraudulently.

  Avoid scams that use the Microsoft name fraudulently

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• How can I fix this error msg? your default printer must support a minimum resolution of 300 x 300 to use the shape tool. I am trying to save in PDF format.

  How can I fix this error msg? your default printer must support a minimum resolution of 300 x 300 to use the shape tool. I am trying to save in PDF format.

  When you have what you want to save the selected PDF file, make sure that you press properties, and set the resolution in the settings.  PDF files themselves have quality settings, (print quality, Web quality etc) then make sure that you have the right to a game if you plan to use the "print" function to save in PDF format.

• How to fix this error "generic host process for win32 services has encountered a problem and needs to close ' help me please I am using windows xp with SP3

  How to fix this error "generic host process for win32 services has encountered a problem and needs to close ' help me please I am using windows xp with SP3.

  When I close this error or click on send or do not send, my session network remote also network mapped drive United Nations accessible then I restart my computer and I can access my network grows but after awhile once again this error and the same network behavior that I discussed earlier.
  someone has a better solution that take care of this problem.

  Hello

  Given that the problem is related to the server of the IRIS, IRIS Contact support for assistance:

  http://www.IRISLink.com/C2-1967-189/I-R-I-S---technical-support.aspx

  Hope the above information is helpful.

• This program can not find the Web page

  I have Windows XP.  Every time you start-up the computer and after the restart, the screen "this program can not find the Web page" appears.  I have to close it manually to display the desktop before entering for example or Google chrome.  How to get rid of the error screen?

  I have Windows XP.  Every time you start-up the computer and after the restart, the screen "this program can not find the Web page" appears.  I have to close it manually to display the desktop before entering for example or Google chrome.  How to get rid of the error screen?

  try to use "Autoruns for Windows" and check if there is a boot entry that is associated with your problem. If you do not disable an item at a time and restart the pc and isolate it.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Error with Facebook and other web pages; document. Body' is null or not an object

  Original title: error line: 19 tank: 23004 error line: 20 cha:124

  document. Body' is null or not an object line: 19 tank: 23004... object doesn't support this property or method line: 20 char: 124... I get these errors on facebook and other web pages help me please!

  Hello

  IE - Tools - Internet Options - Advanced tab - navigation on the article - check the BOTH Disable script
  boxes of debugging.

  Close and restart IE.

  ------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ========================
  ========================

  Tips for solving problems with Internet Explorer
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

  ------------------------------------------

  Methods more troubleshooting for Facebook and other questions of the site, if needed:

  Try to add to your trusted sites in IE - Tools - Internet Options - Security - Trusted Sites.

  https://www.Facebook.com/

  http://www.Facebook.com/

  http://www.Facebook.com/login.php

  http://www.Facebook.com/Farmville

  What antivirus/antispyware/security products do you have on the machine? Be one you have
  EVER had on this machine, including those you have uninstalled (they leave leftovers behind which)
  may cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if she's here, it is no longer necessary but Java
  installs and it causes more questions - have you never update Java to go back in and turn it off again.) Search
  other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look
  right. Allowed are usually OK and "unauthorized" are not always bad. If doubt about a program
  ask about it here.

  Could not be a free - SpyBHOremover - BHO - standalone program, needs no installation, download.
  unzip and run - all are not bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  ------------------------------------------------------

  Maybe using Compatibility Mode will help you.

  Introduction of compatibility view
  http://blogs.msdn.com/ie/archive/2008/08/27/introducing-compatibility-view.aspx

  http://www.Microsoft.com/Windows/Internet-Explorer/features/easier.aspx

  Some Web sites are not displayed correctly or work correctly in Windows Internet
  Explorer 8
  http://support.Microsoft.com/kb/956197

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Converter 5.5 - permission denied for operation error

  I Converter Standalone installed on my laptop, I put in the vCenter IP or name, any, enter the administrator account and always get permission denied to choose the virtual machine to v2v would be. The identifier of the administrator is the same that the administrator of domain/local on the server vCenter and the same connection works correctly for vCenter Server is the only connection that I never use. I added the account domain administrator for the Local administrators on the server vCenter account...

  What should I do?

  Thank you, Tom

  I found the worker log files. I do not have the appropriate permissions in the search folder to this topic.

  It is said that he borrows my own domain name.

  Runs the converter 5.5 * Administrator * fixed things.

  There is no need to do before I can remember.

  Now I know what to do, run the converter as an administrator.

  Thank you, Tom