Similar Questions

• 5.7 Lightroom will not import. I get this message: the instruction at 0x17f3f885 referenced memory at...  Memory could not be read.  This program has been flawless for the past 3 weeks.

  5.7 Lightroom will not import. I get this message: the instruction at 0x17f3f885 referenced memory at...  Memory could not be read.  This program has been flawless for the past 3 weeks.

  Hello

  You really need a little more information such as operating system, memory, etc.

  Usually a mistake like this happens because a background process is running and interfere with the available RAM, not enough virtual memory (Windows), drivers of HW obsolete or just an incomplete installation.

  Or, one of the biggest problems is add-ons in internet browsers.

  Alternatively, another problem of Lightroom, no sufficient permissions on the directory where you import image files.

  Please provide a little more information.

• Some plugins required by this page have been blocked for your protection.

  I get this error after you install a lower version of Firefox in addition to the current version of Firefox. I have since then removed the old version of firefox and reinstalled the current. There's no matter what I do. YouTube keeps warning me that I have to update flash player (even if most of the videos work there).

  Here are some facts:

  My flash player is up to date, has been removed and reinstalled.
  Shockwave has been removed and reinstalled.
  Old version of Firefox has been removed.
  Current Firefox has been reinstalled and is up to date.
  I get "some plugins required by this page have been blocked for your protection." on each page with flash player on.
  Pages do not display flash objects, nor is there anything to place them - they're invisible, empty space.
  Flash drive works fine in IE, no error messages.
  When I check for updates of the addon, no addon is listed as obsolete.
  These are my addons: http://i.imgur.com/HJEaGmz.png

  Why I always get this message? How can I fix it?

  Thanks in advance

  Hey, I checked the help > troubleshooting information once again and saw that there is a "Reset Firefox" button... ». I used that and it seems to have solved the problem!

• Access Manager will not see this website need a supervisor password. This Page has been blocked by your approved Sites list.

  kb956196

  Access Manager will not see this site, supervisor password needs.  This page has been blocked by your approved sites list

  We have forgotten the password. is there a way to reset the password or to disable it without the password?

  Hello

  Download and run the http://www.nirsoft.net/utils/conadvpass.html program (if you are able to access the site)

  If not, perform this task:

  "If you have forgotten the password of Access Manager, you can remove it by accessing this folder in Regedit (don't forget to back up your registry first):

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\

  CurrentVersion\Policies\Ratings

  Select the key called icon in the right pane and press on delete. Close Regedit.

  Now, you can start Internet Explorer and goto tools, Internet Options... Select the content tab and click on disable. When asked a password, do not write, just click OK. This will disable access Manager, since nothing is more a password. You can enable it again as soon as invent you a more memorable password"

• When I try to log in to my admin user, a screen appears and says ' the user profile service has no logon. User profile cannot be loaded. »

  original title:

  When I try to log in to my admin user, a screen appears and says ' the user profile service has no logon. User profile cannot be loaded. "I can't spend anything for users of our families because they ask for approval from the admin and it won't work. What can I do to correct the admin user?

  You have another admin account , you can connect?
  If so, please do it and then run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and selectSafe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, run the Microsoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Opening of session and run the tutorial from Microsoft technical support below.

  3. If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
  How to do system restore: System Restore tutorialtutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods,go through one by one.
  Method 3 has a "fix it for me" application
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• This site has been blocked for you!

  Steps to access this site again:
  1. click on unlock the button below
  2 choose the survey to verify you are human
  3. complete survey
  4. continue to use this website
  Click here to unlock

  This site has been blocked due to your recent activity. Your actions have been marked as spam bot like, visit this site again, follow the instructions on the left. This is done for security reasons. Please take the time to go through the verification process to restore that allows access to Web sites blocked, thank you for your time!

  Please HELP, thank you.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender: Home Page:
    http://www.Microsoft.com/Windows/products/winfamily/Defender/default.mspx
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Facebook does not European site in my borwser all I receive this error code "this site has been blocked for you" or "error code: ssl_error_no_cypher_overlap'.

  Hi guys Icant open my Facebook I receive this error code (this Web site has been blocked for you) or (error code: ssl_error_no_cypher_overlap)

  Hi Dhivyaraj,

  Thanks for choosing Microsoft Community.

  I see that you get an error message "this Web site has been blocked for you" or "error code: ssl_error_no_cypher_overlap' while accessing the Facebook. .

   

  It would be useful, if you answer this question:

  Did you do changes on the computer before the show?

   

  I suggest you follow the provided methods to solve the problem of face book:

  Method 1: Clear the SSL State.

  a. Click Start and type run in the search bar...
  b. in the prompt to run it, type inetcpl.cpl and press to enter.
  (c) in the properties of Internet window, click on the content tab.
  d. click Clear SSL State.

  Method 2: Try optimize Internet Explorer and check to see if it helps, here is the link:

  http://support.Microsoft.com/kb/936213/ro

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Note: if the problem persists, you can contact facebook support.

  http://www.Facebook.com/help/community

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• When I try to click on a link in an email that I get "this operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator.

  Original title: link stop "restrictions in effect on this computer.

  All of a sudden when I try to click on a link in an email that I get "this operation was cancelled due to restrictions in effect on this computer. Please contact your system administrator. Well... I am the system administrator and I have no idea what is the cause. What is a windows problem or a problem of office?

  Bruce,

  See my post on 1 December. None of those links gave me an answer that worked. I found a Geek forum that works. I now can have all three browsers installed IE9, GoggleChrome and Firefox. I like the last two because IE9 periodially breaks down and the others did not. In addition, Chrome is faster for some things like the control off site to purchase.

• "service pack do not have. recovery of Exchange"has been ongoing for more than 12 hours. Have turned off on the reboot, but the message remains. How can I fix?

  I installed the service pack and when the computer restarted message "service pack do not have. restoration of the changes. "came and slept there. I tried to turn off computer and start in safe mode, but nothing helped. Has been ongoing for more than 12 hours and no change. Any ideas? Thank you

  Hello

  You can try this:

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• I get "proxies cannot be captured by a stateless session" when I try to log in to this site. I went there there more than once in the past, but this is the first time I received this answer and you are unable to log on to this site.

  I've logged on this particular site, http://www.springairsystems.com/SpecAndQuote/User/Login/View.aspx a number of time's recent past. When I try to log in now, I get a prompt in red letter indicating, "proxies cannot be captured by a stateless session." What should I do to open a session? I set my privacy settings to allow cookies from Firefox, but is not alleviate the problem.

  See this - http://en.wikipedia.org/wiki/Proxy_server

• Do not load images and I get a message saying "this image has been removed for security reasons. What makes that? How can I stop it?

  All images are blocked - without exception

  You get this message on all sites?

  Try the "Settings" dialog box If your Trend Micro toolbar is not already displayed, right-click an empty area of another toolbar or after your tabs and turn there. (Or Alt + v > toolbars > Trend Micro toolbar)

  The settings dialog box (takes awhile to load) does not specifically mention blocking images, but it does not mention attachments. Tweaking these settings change anything?

  You can try to disable your add - one (s) of Trend Micro security temporarily and see if that changes things.

  Orange Firefox button or classic menu Tools > Modules > Extensions

  Titanium includes several modules. I could start with the "Trend Micro Toolbar" and see if that is the question.

• How can I resolve this - AUTHORIZATION has BEEN REVOKED CS5 INSTALL doesn't WORK on Mac OS SIERRA SAYS the APP

  I had to reformat my Macbook air to update the operating system OS Sierra

  with everything deleted, I am trying to re-download my adobe photoshop cs5 extended... I downloaded successfully the dmg, but the guest of installation inside it will not work warning saying 'Install' cannot be opened. you must eject the disk image.

  then when I click on the? It is said

  authorization of the application has been revoked

  There may be a problem with this App. Although the application has been signed by an identified developer, revoked the certificate for the app and it cannot be opened.

  check with the Mac App Store or the developer of the software to see if there is an updated release of this app.

  so I talked to someone on the chat to adobe but they say they don't provide support for the current version products and told me to talk to Mac... Then I talked to Mac and they told me to ask if adobe has a compatible version for OS Sierra... went back to adobe they gave me icon apple steps - system preferences - security and privacy - blocking - click on download from anywhere - unlock - it did not work and they said the problem is that I use a beta version of the software (Sierra) that's why the error shows and that the solution should have said fixed operating system has not been started and is not tried and tested... I'm going to my version is not beta, because they have officially launched yesterday... and told me to ask adobe to publish an updated version that works on the Mac Sierra...

  of course, none of them have helped...

  Anyone have any ideas?

  I'm not good with computers, software and my head is about to pop, last resort's downgrade to the operating system that I used before... to run cs5 coz I need it... unless someone has a solution pls... Here's all the details... Sorry for the test

  Hi, I think I might have a solution, I'm busy now installing CS5 premium on a new installation of sierra, but will let you know if there are problems! I had the same problems as Britz00, very frustrating!

  After I had run the patch to allow 3rd party applications will be installed, (in a terminal such as suggested by K Perkins) instead of a double click on the installer in the terminal I dragged the exec 'install '. by opening a Terminal window and which seemed to work? (open the "Adobe CS5 Design premium Installer", then right click on the 'install' folder and click on "view the contents of the package in the menu drop-down down that pop-up, then double-click the"content"folder, then double-click the"MacOS"folder.") The exec 'Install '. file is the one that I dragged by opening a Terminal window) hope it makes sense. (Sorry, I'm terribly inept to explain technical things in computer)

• Firefox crashes too often. This problem has been ongoig for months, and Firefox does not respond to incident reports.

  Firefox crashes unexpectedly during the loading of pages. It does not crash on specific pages. It will crash unexpectedly on any Web site.

  I have settings set to send reports to Firefox, but I have never received a response or fix.
  

  I tried to fix the problem using the knowledge base. He has not fixed the problem.

  This http://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes can also be useful to know what gives you trouble.

• I wanted to just make sure that this product has been good for me...

  I create multiple VMWare images for software demos. It is very common to have to create a new image for each proof of concept that I need to build. I was hoping that I could now store all these images in the box of VMWare Server and access them whenever I needed it. Here are some things I could use some help on...

  Can I use a VMWare image created with the desktop on the Server client?

  If I create a new VMWare image with server I can copy that out and use with VMWare Desktop then put it back?

  These are really the most important things for me now. Thanks for any help!

  Hello

  I create multiple VMWare images for software demos. It is very common to have to create a new image for each proof of concept that I need to build. I was hoping that I could now store all these images in the box of VMWare Server and access them whenever I needed it. Here are some things I could use some help on...

  POC, configurations, you can alsow wanting to check the functionality of snapshot as this one allows to roll once you have proved your concept.

  Can I use a VMWare image created with the desktop on the Server client?

  He is not quite sure what you mean with the desktop client, but if you mean that VMware Workstation or VMware Player, then Yes you can.

  If I create a new VMWare image with server I can copy that out and use with VMWare Desktop then put it back?

  Use in workstation and then save it again as server, basically Yes you can.

  --
  Wil
  _____________________________________________________
  VI Toolkit & scripts wiki at http://www.vi-toolkit.com

  Writer to the blog www.planetvm.net

  Twitter: @wilva

• My home page has changed without my permission. When I try to reset it, it will not be reset.

  My homepage got zero to some search engine. http://www.Searchqu.com/406

  I try to reset my home page what she had, but it will not change.

  Make a check of malware with some scan of malware programs. You need to scan with all programs, because each program detects a different malicious program. Make sure that you update each program to get the latest version of the database prior to scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
  • http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free

  See also 'Spyware on Windows': http://kb.mozillazine.org/Popups_not_blocked and searches are redirected to another site

  • also Firefox 9 is here - getfirefox.com