I get two, at the same time, instances of 'connection' tabs when I start. Used to be one?

Similar Questions

• I click on an icon to open it, another one of the icons also gets stressed at the same time

  When I click on an icon to open it, another one of the icons also gets stressed at the same time and that one gets opened rather than I want to open... There seems to be a link between the two. It happens with different icons, not just the same.

  Hello

  You did changes to the computer before the show?

  Method 1
  Step 1: I suggest you to check if the problem persists in safe mode.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  
  Step 2:I suggest you perform the clean boot and check if the problem persists.

  I suggest to clean starts and then download and install the updates.
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  Also, the issue could be due to the virus on the computer. I suggest you run virus scanner online by using the Microsoft safety scanner.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

  Method 3
  I suggest you to run the fixit from the following link:

  Fix broken desktop shortcuts and common system maintenance tasks http://support.microsoft.com/mats/system_maintenance_for_windows/en-us

• How to have an amount and cut in two at the same time

  Hi everyone, I need to display the data as in the example (4 areas):

  Product Category           Number of tickets by category               Product               Number of tickets by product
  
  Category 1                              100                            product A                             50
  
                                                                         product B                              50 
  
  
  
  Category 2                               10                             product C                              8
  
                                                                         product D                               2

  As you can see, I need to see the total number of tickets for each category of product and then cut in two by product.
  
  In an attempt to have this result, I take the following fields the sector of activity:
  
  Product category
  Count (tickets_id)
  Product
  
  but I'm not able to have the amount of tickets per category and the quantity of tickets per product at the same time within the report... because as soon as I shared by product I lose the total number of tickets by category...
  
  How can I have this two amounts together? The first designating all of the notes of the category and the second split by product at the same time?
  
  I tried to do a calculation count (count (tickets_id))... but it is not possible... I got the error "Aggregate functions Nested are not permitted..."
  
  Any help will be appreciated
  
  Thanks in advance
  
  Alex

  Hi Alex,
  In cases like yours when you need two different levels of aggregation, you can use the analytical functions.
  From BA to select only the Product_Category elements and product and create new calculations:

  1. on behalf of the tickets:
  Count (tickets_id) more (Product_Category partition)
  2. for the number of tickets per product:
  Count (tickets_id) more (partition Product_Category, product)

  you will get:

  Product_category count by product by product category
  ---------------------------------------------------------------------------------------------------------------------------------
  1 100 A 50 category product
  Category 1 100 product B 50
  Category 2 10 C 8
  Category 2 10 D 2

  Now if you want you can use the sort and apply the sorting group so it will look like your table model.

  Note that I assumed that a product may be in a category.
  If you got another one then just change groups in the calculation according to the needs.

• Output signal analog two at the same time with the SCC-68. Is this possible?

  Hello!

  I plug in my SCC-68 two things. You're driving in the ao0 (22 screw terminals) and aoGND (55 terminal screw) and a speaker in ao1 (terminal screws 21) and aoGND (55 terminal screw).

  I'm trying to generate a sugnal ao1 sine and a DC ao0 signal. Separately, they work, but at the same time they do not have...

  I had try in Labview SignalExpress and also...

  Any help?

  Thanks: Koli

  Hi Koli,

  already use you it in your code. The vi s Express that you marked with ao0 ao1. :-)

  Mike

• all play them at the same time with several videos tabs

  When I have several tabs open tabs with videos that all try to play at the same time

  Hi crazychief,

  Some Web sites will have this default tag value for their videos. You can try:

  • Enter about: config in the address bar and press to enter.
  • Agree that you will be attentive
  • Search for media.autoplay.enabled
  • Double click to change the false value

  Hope this helps!

• Running two Apps on two computers at the same time

  I know the ability to install on two computers CC and I saw the restriction of not being able to run applications on two different computers at the same time.

  My question is, does that mean that all the two apps at the same time or cannot run the same application on two computers at the same time?

  For example, my daughter can use Flash while I use Illustrator on the same CC account?

  For example, my daughter can use Flash while I use Illustrator on the same CC account?

  # The license is for you and you alone. It is not a shared license.

  Your daughter must have its own Adobe ID and its own subscription to use the software.

• FBus Monitor may not work with Configurator at the same time

  I am using NI USB-8486 material and I can get Fbus Configurator work on it. But whenever I run the FBus monitor, the Configurator will go wrong. (Device on the Fbus become invalid)

  I checked the Configuration OR-FBUS Interface utility, I have seen that the use of the port can be either OR-FBUS or Bus-monitor.  Since the USB-8486 only has a port, it means we can only support a single application (Configurator or monitor), instead of two at the same time?

  I'd appreciate any help!

  Hi Steve,.

  That's correct - USB-8486 can function as an interface device or monitor buses at the same time, and the role is configured in intensive care.

  If you want to have two roles at the same time work, you will need two NICs installed.

• 2 phidgets at the same time, the event problem

  Hello

  Currently I do a Vibration Analyzer to measure the communicability between 2 masses, so I need to measure the two masses at the same time with 2 phidgets at the same time. My problem is, when I use only phidget both the program identifies correctly and it measures very well, I use 2 different phidgets, the 1056 and the 1049. But when I plug them both at the same time only an event is on, he identifies the two but the graphs do not work properly for some reason, and I think that its because of the event. I'm not very good at Labview, I only did a simple program before, so my experience is not very large. I hope that he didn't need a Subvi.

  Would be grateful for the help from you guys.

  Best regards.

  João Pereira

  
  

• Several scripts that run at the same time?

  Is it possible to have multiple scripts running successfully at the same time?

  For now if I start a second script while one is still ongoing, the other to be completed successfully, but one stops. This seems to be because one is so more the active document, once the other opens so cannot continue.

  Is there another way to anything like that script so that multiples can operate independently at the same time? You might wonder why I don't want to run both at the same time and not just wait, but I install an asp.net web do front end and have problems if two people, click on the button around the same time.

  I'm guessing this won't be possible and I'll have to look for ways to achieve this in asp.net instead and sort queued requests so you will have to wait longer if the script is already running?

  Thank you

  Andy

  I'm guessing this won't be possible and I'll have to look for ways to achieve this in asp.net instead and sort queued requests so you will have to wait longer if the script is already running?

  It is correct. PS script interface is single-threaded, so you'll need requests queued.

• You can use the activity tracker and an application running at the same time?

  I've been running just with my watch and the Apple activity tracker.

  But I wanted to calibrate so tonight I ran with my iPhone, too.

  I tried to use the Nike + and the PPP of activity both starting on my watch. I ran with the application of the activity on the screen.

  When I did I stopped the activity app and went to the Nike + app, but it was stopped.

  Then can you run the application of activity and a different running application at the same time. Or do you need to start another app on your phone and activity on your watch?

  Thank you all

  Hello

  To save your route at the same time apps, save the workout using the application of the workout on your Apple Watch (early check it there first) and also through the application of Nike + running on your iPhone.

  Monitoring of your training via the integrated application of the watch workout will cause your heart rate to be monitored at all times for the duration of your workout.

  The app Nike + running cannot currently access heart rate monitor watch directly, but if I read the heart rate data of the health on the iPhone app, it will always be able to access - indirectly - the same heart rate for your exercise data:

  -On your iPhone, in the application of health, press Sources (tab) > Running > turn on Allow 'Running' to read heart rate data.

• DAQ Assistant Express Vi to acquire and generate data at the same time in LABView

  Can I run acquire it and generate the Express Assistant DAQ Vi at the same time in a LABView program? I am using LABView 2010.  It's acquire and generate a NI USB-6009.

  Thank you

  Mary

  You can acquire and generate the same VI but obviously you can't generate a wave form unless you do a single point at a time inside a loop with a sample on request and can live with low samples/s specifications.

• My wife and I have iPhone 5 s, the two rings at the same time while we are at home when one of us Gets a call. They are on the same account, is there a way to stop this without establishing separate accounts?

  My wife and I have iPhone 5 s, the two rings at the same time while we are at home when one of us Gets a call. They are on the same account, is there a way to stop this without establishing separate accounts?

  settings - phone - call another device - off.

  One of you should get their own apple ID, you just go to have problems later.

• Avoid to get two theards at the same time

  Hello

  I was wondering how to avoid to run two threads at the same time in teststand. When I using teststand, I found it can run two threads in simultaneity.for example, I can open a file sequence, using single-pass enter point to run a theard, when this theard is not finished, I use single-pass or TestUUTs enter point to run other theard. I want to avoid this case. Is there settings, we can get motor teststand to tell me a thread is running or not?

  Thank you!

  You write a custom user interface? If you use an application Manager (all the example user interfaces and the sequence editor to do), you can see:

  ApplicationManager.Executions.Count > 0

  If you use just the engine that you can keep the number of executions by increment your account upon receipt of the UIMsg_StartExecution UIMessage and reduce your number when UIMsg_EndExecution is received.

  If instead you want to determine the number of executions of a sequence running, you can use RunState.Engine.GetInternalOption () to get a reference to the Application Manager (at least of the UIS and the sequence editor that use an Application Manager) and then do the following ActiveX to get the Executions.Count property.

  Hope this helps,

  -Doug

• I can't get two cards USB worked at the same time

  I use Labivew 8.6 to program an application using NI UBB-9211 and USB-6211 connection to two USB ports on my PC in order to measure the temperature and pressure (voltage) at the same time. Also, I need to generate two AOs of USB-6211 to drive my engines. I tested two cards, they are OK. But when I program them together, I get only 9211 worked, an error poped to acquisition of data USB-6211. Could you please help me on this? advice or examples of VI / would be greatly appreciated. Thank you in advance!

  Hi navistar.

  It seems that you should be able to do what you are trying to accomplish. Can you post some information about the error you receive? You use the lower level Assistant DAQ or DAQmx screws in your application? You can post a screenshot of your code where it is merged together and easier troubleshooting. You use any trigger of your application? We have examples in the example Finder (help > find examples) under Hardware Input and Output > DAQmx. These examples are a good place to start to build your application. If you already have the code work for each instrument and you have problems combining them, it might be easier to work with where you are at as opposed to leaving it everywhere.

• Trigger two FPGA instances at the same time

  I have a basic FPGA code that transmits the bits of data on a serial (RS-485) bus, the code is written so that it expects in the first State of a machine to States in a single-cycle timed loop.  After a certain trigger, he begins to read a FIFO containing data and sends the data on a line of Tx.  It does this until all bits are send and then it goes back to the first State to wait for the next trigger.  The relaxation is necessary because windows must fill out first before the FPGA FIFO can start sending.

  I need two instances of this code runs, because I have two buses of com (one is redundant).  So I use the FPGA code as a Subvi and I wrote a main FPGA vi to call two separate instances of the Subvi in parallel.  A regular window vi wrote on the FIFO for bed FIFO for Rx and Tx.  No problems so far.

  The thing is I start two transmissions in 200nS of each other (Yes, nanoseconds).  Windows will write two FIFO in parallel, but the timing is 4uS apart, too long.  I tried implementing a Boolean flag in the Subvi FPGA, but windows can not write directly on the control of Subvi.  FPGA won't allow (the Write function is grayed out).  I tried to use a FIFO for a flag, but the problem is a race condition.  One of the instances is first read FIFO and he destroy.  The other can't read.  I need a common trigger point to be used by the two instances of Subvi.

  My final solution was to use a memory in the Subvi FPGA and digital control in the main FPGA vi.  Windows write in numerical order, it may because the control is in the main FPGA vi.  Inside the main FPGA, I run a timed loop that looks for digital to be zero.  If so, it writes the value into the location of the memory used by the Subvi FPGA.  After awhile, the principal wrote a zero back to memory to prevent the Subvi is restarted, as well as to write a zero for digital to reset.  This repeats, waiting for windows to write in digital again for the next transmission.

  I had to do it this way because sometimes I want to pass on the bus, and sometimes just one or the other.  Numeric values are used to determine which to pass on.  Now, the transmissions are starting to almost exactly at the same time, 1 or 2 nanoseconds apart.  But the trigger process seems very silly to me.  I was wondering if there is a better solution.  I'm pretty new to FPGA.

  tbob wrote:

  Basically, I did the same thing using FPGA memory.  Windows I am writing for a digital control that resides inside the main FPGA vi.  In the main FPGA, I write in the memory.  Inside the Subvi FPGA, I read the brief and decode the value to use either one or the other or both buses.  After fool with it for awhile, because reading Memeory needs to use a shift register (probably because it takes a whole cycle of clock), I had to work.  The two bus trigger at the same time.  I guess it's not really important if I use a FIFO or if I use the memory.  The main problem is that I write Windows at the hand of FPGA, then the hand of FPGA for the Subvi FPGA.  Then the time is right for what is the Subvi is.

  There are some advantages to the use of two FIFO on your approach.  First of all, you don't have the change of register for the memory location.  Secondly, we should not worry that VI is responsible for compensation to the memory location, or do, you run the risk that one of your subVIs run twice, or not at all, if the memory is not erased at the right time.  Perhaps most important, you'll save yourself space on the FPGA because you will not need arbitration - the additional code that is added when two parts of the FPGA try to access the same resource at the same time.  In your case, both instances of the Subvi access the memory block at the same time, so the FPGA compiler adds additional logic to avoid conflict.  If only read you the memory block in one place and just write it in one place (reading and writing can be different loops where subVIs) there is no need for arbitration.  Using two FIFOs, you can keep independent and avoid the conflict resolution code.  See the help for the "arbitration" for more details.