I have a few qeustions about IMAQ images and control charts

Similar Questions

• I have a few questions about the internet and partition recovery

  I deleted completely OS X Yosemite and only left Windows. Now that I'm pretty sick of Windows and want to use my Macbook Air for real, I am using recovery of the internet (order and R) to reinstall OS X.

  I backed up all my data and that you haven't stored anything in my Macbook. My questions are: (I know they are long, but they are quick to respond)

  1. I want to erase everthing on my Mac. I have now 3 partitions. After starting and pressing command + R, I would use disk utility to erase everything, like this .

  After you click Delete, would be merged my 3 partitions in 1 and I could repartition my Mac?
  

  2. I want to create a partition for OS X Yosemite (and possibly upgrade to El Capitan). What is the minimum recommended size for partition OS X Yosemite? (Because my SSD is only 128 GB)

  3. Let's say I create 3 partitions, let's name A for OS X, B for my data and C for reinstalling Windows. If I boot into Windows, I'd be able to use (read and modify) data on B, or just OS X could do that?
  

  4 the amount of data I should download during the recuperation of the Internet? I guess that much since I'm downloading the OS X package, but my internet is quite slow, so I want to know how of SGB I have to download.

  5 If I asks me to enter the Apple ID to download OS X, would any book Apple ID?
  

  Thanks for reading. I would be extremely grateful if you answer my questions. See you soon

  • 0: have backups of everything that you care and disconnect external drives except those you use specifically.  While he isn't supposed to, repartitioning should always be supposed to cause a total loss of data.  Corruptions can and do happen sometimes, unfortunately.  Stray user commands can sometimes target bad drives for erasure or repartitioning, because errors can happen.  Do not connect anything unnecessarily.
  • 1: Yes.  You want to create a volume of GPT partitions.
  • 2: let Yosemite size and add his own scores.
  • 3: using Boot Camp to add the Windows partition.  With a small that disk, I might well Park out Windows on an external storage device, or use a virtual machine, and Windows as a guest.   In general, add additional user-defined partitions are not general, something I recommend.  Resizing and adding and removing partitions can meet with corruptions, provide for backups.
  • 4: depends on various factors, including least aren't servers from Apple how busy are, and how fast your network link is.  I have used to create a local installer and use it.   That fact also resumed and other operations more quickly, at the price of a few $ for a drive of sufficient size.  Recent versions of OS X are ~ 6 gigabytes in size, based on installers the.
  • 5: any Apple ID will work, but having more than one active Apple for OS and app ID buy usually leads to disputes to find out who bought what and who can update what.

• Hello Mr President! I have a few questions about the Word report generation please.1.How can I add a border to a page in word? 2. How can I add gridlines to a table generated related word?. Can 3. how I add a border to a picture of the Word report?. Thank

  Hello!

  Sir, I have a few questions about generating word reports using (C language in labwindows) please.

  1. How can I add a border to a page in word?

  2. How do I add border lines and grid to a table generated in Word report (not "cvi control table"inserted from gui, I wonder about the table generated in Word report)?

  3. How can I fill a table cell of report word with the data type other than 'character '.

  And sir a question on the use of the timer in labwindows cvi please.

  Sir, I'm trying to set a time minimum interval timer to 1millisecond (0.001 s), that I have set, timer cares about the interval set by me he only meets the minimum default time interval which is, I think as 10milliseconds (I'm using windows xp service Pack 3 version 2002).

  Concerning

  Imran

  Pakistan

  Have you read this statement ? It explains how to set the registry value:

  If the REG_SZ useDefaultTimer does not already exist, you must create it under HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\CVI Run-Time Engine\cvirte. "" This can be done navigate to the appropriate folder, and then click Edit "New" string value. Then, click on means the name of the new value created, select Rename, and then specify useDefaultTimer as the name. Finally, double click on the name and specify the value True or False.

• Hello, I have a few questions about the affiliation of creative cloud

  Hallo,

  I have a few questions about the affiliation of creative cloud:

  1. There is an Adobe offer up to 27.11. : the price offered is 47.59 euros per month including MWSt (VAT) or €568,20 / year.

  For what is this offer period/how many years valid?

  2. after the period of the offer, the membership will cost the standard-price: €59,49 / month or €713,86 / year (seen on the Adobe Web site).

  For how many years this standard - the price is fixed?

  Is the standard-prices include MWSt. (VAT) too?

  Thank you

  Thomas

  Hello

  I advise you to contact Adobe sales for queries on pricing.

  Contact us | Adobe

  Kind regards

  Sheena

• I have a few updates that will fail and she keeps offers the update of these points - I noticed that he often has to do with something related 64-bit.

  I updated my newly installed Windows 7 Pro (64) and many update took place, BUT...

  I have a few updates that will fail and she keeps offers the update of these points - I noticed that he often has to do with something related 64-bit.

  How document and fix this?

  Welcome!

  See if using the auditor system in Windows files can repair the files of Windows updates:

  https://support.Microsoft.com/en-us/KB/929833

  Similarly, you can reset Windows updates by following this here:

  https://support.Microsoft.com/en-us/KB/971058

• r beeb used before on pc. The problem is that these two PCs are thrown NAWL avay chrased long, I hava a few photos on the program and its impossible to buy a new number for one that oldc product. What should do?

  r beeb used before on pc. The problem is that these two PCs are thrown NAWL avay chrased long, I hava a few photos on the program and its impossible to buy a new number for one that oldc product. What should do?

  If you have the serial number, you can contact the Adobe Support via chat (when they are available - not weekend) and ask them to reset your activations.  Which will allow you to reinstall and activate again using the serial number, which you have now.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• I have updated to DC (about a month) and cannot save my PDF files more.  What is the cause of the dialog box "Save as" do not open?

  I have updated to DC (about a month) and cannot save my PDF files more.  What is the cause of the dialog box "Save as" do not open?

  Hi mwebsterdps-sc,.

  Try this: -.

  The default "Save as" dialog Acrobat DC is different from the dialogue box you had in earlier versions of Acrobat, it also allows you to record in the clouds and previous locations that you saved the files. It is possible that when Acrobat tries to connect to the 'cloud', it runs into problems. You can try to disable this feature to see if this brings your backup in the back of the box: open Acrobat Edit menu access-> Preferences, then go to the "General" category and uncheck "show the online storage when you save files:

  

  I would like to know if it works.

  Kind regards
  Nicos

• A few questions about After Effects and CGI (computer generated images)

  Hello

  I am very new to this forum and After Effects. But I have a few questions.

  Now, I recently started a film project with my friend at a workshop. It's an action/sci-fi film and I'll probably be the editor and, if necessary, support visual and special effects. This looks like a pretty big job for a noob, but we do not have a limit of time with the project, so it's time to learn.

  But my questions. I thought to myself of the introduction of CGI (very simple of course). I studied the use of blender, and I think that I'll use for modeling and animation. But Ae should be used in any stage of production of CGI or make in a blender? If I do, how? I'm going in the wrong direction (bad kind of software, etc.)?

  In addition, I do not speak of fully producing the scene with the computer, but by adding things like the characters or objects, may be special effects.

  I'm hoping for an answer to my questions, but if you only have one or two responses, I'm happy to hear also. You are also welcome to correct me if I misunderstood something. Thank you for clarification if you need!

  pek859 wrote:

  1. I am very new to After Effects and this forum. But I have a few questions.

  2. now, I recently started a film project with my friend at a workshop. It's an action/sci-fi film and I'll probably be the editor and, if necessary, support visual and special effects. This looks like a pretty big job for a noob, but we do not have a limit of time with the project, so it's time to learn.

  3 but my questions. I thought to myself of the introduction of CGI (very simple of course). I studied the use of blender, and I think that I'll use for modeling and animation. But Ae should be used in any stage of production of CGI or make in a blender? If I do, how? I'm going in the wrong direction (bad kind of software, etc.)?

  4. in addition, I do not speak of fully producing the scene with the computer, but by adding things like the characters or objects, may be special effects.

  5. I'm hoping for an answer to my questions, but if you only have one or two responses, I'm happy to hear also. You are also welcome to correct me if I misunderstood something. Thank you for clarification if you need!

  1. Welcome to the family. AE is big, very big. It's hard. Really hard. Not sure how hard AE is learr and master.

  2. no time limit is good, but you will need the money.

  3. This is not a forum of Blender. You want to discover the film, CGI and Blender own forums for this kind of assistance.

  4 AE is for your compositing and special effects. But you will need to learn how both apps work until you decide how to distribute your project. A comparison would be shooting your film. Using a digital SLR? Do you know why? Or do you use a GoPro? Another example may be Apple Final Cut Pro. You can edit the audio in it, but it is preferable to use an audio application. You can do special effects in FCP but it is better to do complex things in motion for After Effects. How can you know what app is appropriate a lot of experience. Many failures.

  5. we were all new EI vidoe editing and special effects at one time or another. The user forums are not places to learn how to use these applications. Do you with tutorials, books and tons of time. One thing is to learn how to use the Blender to make a robot move. Do the robot into a character that requires the public to worry, it is quite another. Using AE to create a layer of clouds is one thing. With these clouds react to bow waves created by your robot flying as it closer sonic speeds is quite another challenge.

• A few questions about component image

  Hello

  I meet two issues when you use the image and can not solve myself after reading documents online.

  1. How can I me the runtime image source? I find image.source return a class object, but not the path of the source image.

  2. how to ensure the image of image loading correctly? In my itemRenderer, I put the source of the image with this

  source = "{appUrl} + {Data.PicName} '"

  I'm sure that there are no problems with the path, but it shows a broken image. What is the right way?

  Thank you

  You can use myImage.source.toString ();

  The mx:Image is extended the SWFLoader, so you can add a complete event to it to catch when an image over an ioError to intercept a loading error or

• I have used Firefox for about 8 years and yesterday lost my bookmarks toolbar. Any suggestions? Yet the bookmarks and it still seems in sight.

  I have used Firefox for about 8 years or since first of all, it has been developed and I love it! I especially love the personal bar and he used all these years without any problems. Yesterday, I lost somehow the bookmarks toolbar. It is still listed under view in the Menu. When I check, besides, that area expands a little and when I uncheck the box decreases a little. All my favorites are still there, but not the toolbar. I tried everything I know to try. I uninstalled and downloaded Firefox again and reinstalled. I have restarted my computer several times. I tried dragging the new bookmarks in the toolbar of the address of the site area. Nothing works. Does anyone have any suggestions as to what can be the cause and have a solution? I HATE that, without this toolbar. Thanks in advance!

  If the menu bar is hidden, then press the F10 key or hold down the Alt key to make the call of menu bar.

  Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible: "view > toolbars".

  • Open the Customize via "view > toolbars > customize.
  • Make sure the "Bookmarks Toolbar items" are on the personal bar
  • If the "Bookmarks Toolbar items" is not on the bookmarks toolbar, then FRY it in the toolbar palette in the window the bookmarks toolbar Customize
  • If the missing elements are in the toolbar palette then drag them from the window, customize the toolbar
  • If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar set up
  • http://KB.mozillazine.org/Toolbar_customization
  • https://support.Mozilla.org/KB/back+and+forward+or+other+toolbar+items+are+missing

• Can you have folders in you folder of images and the images are visible?

  Can you have records in your image folder and the images still be seen? I have a graphic file with images and they can be seen on the site, however if I insert files in the pictures folder, the images are not displayed, are what I did or is not possible with dreamweaver?

  I.e. graphic > pendants > outdoor shots.

  Inside or the other of the two last records images do not appear on my site!

  Images can be shown no matter where they are in your site. The only downside is that you have a working image link.

  For example, Graphic/Pendants/Exteriors_Shots/myImage.png note underscore in the path. This is because many browsers interpret too much space. This means that your subdirectory should be renamed accordingly.

• I am interested in the predator AG3-605-UR1H. I have a few questions about it.

  My first question is whether it is possible to buy this model without the graphics card in it. I have a friend who has the same graphics card on his pc and is willing to sell me half price he can pass to a better graphics card.

  My second question is he the same motherboard as the fact of this model: http://us.acer.com/ac/en/US/content/model/DT.SPXAA.022 I would like to know because I think that a few years on the road, I would upgrade to the graphics card.

  I was also interested in this model: http://us.acer.com/ac/en/US/content/model/DT.SPXAA.017

  Why is not available for online purchase? It will be available in the near future?

  inspectorlunge,

  Good questions, let's see if we can get good answers.

  The units in question:

  AG3-605-UR11 / DT. SPXAA.022

  AG3-605-UR1H / DT. SPXAA.021

  AG3-605-UR2F / DT. SPXAA.017

  All our AG3-605 series models come with an adapter installed in them. If you find one of our units that use the same video card you want to get your friend you could use the two together, your overall experience growing.

  Insofar as the same motherboard, Yes, the card mother in all three are the same.

  We have a unit AG3-605 on our Acer store for purchase, Predator G-AG3 - 605 - UR1H Gaming Desktop, if it's where you were looking.

• I have a few questions about Satellite Pro L300

  1.) how can I update my Bios? I find the zip file, but no further information how it works?

  2.) I want to upgrade to more memory. 2GB are less for quick work. Where I could find information on the memory controller-p. e.g. voltage, Timings... to pass new memory to 4 GB.

  3.) my PSSD1E shows me in Windows7 - systems a empty SATA - controller hardware.
  Is it possible to have an option for outgoing-eg SATA-OUT for external device connection?

  Sorry for my worse English.

  > 1.) How do I update my Bios? I find the zip file, but no further information how it works?
  Check this HowTo:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=60

  > 2.) I want to upgrade to more memory. 2GB are less for quick work. Where I could find information on the memory controller-p. e.g. voltage, Timings... to pass new memory to 4 GB.
  I think that the use of the laptop Chipset Mobile Intel® GL960 Express. This chipset support only 2 GB of RAM and 4 GB of RAM are therefore not possible

  > 3.) My PSSD1E shows me in Windows7 - systems a empty SATA - controller hardware.
  > Is it possible to have an option for outgoing-eg SATA-OUT for external device connection?
  Some L300 can be equipped with a second HDD. Checks if the second Bay of HARD drive (at the bottom of the unit) contains some connectors. You will see the connector on the HARD drive, then the second HDD if possible.

• I have a few questions about the U2410 Rev update.

  I bought U2410 in September 2009 with Rev A01.

  I read that the last Rev thereon is A05?

  Shoud I update Rev A01 to A05?

  And what should I do if it is true?

  Is there an improvement on A05?

  Thank you!

  WithSmile,

  I can say that only two U2410 revisions that makes any material changes were A01 and A02. The last numbers you see received these numbers because of related material changes in OSD (On Screen Display) or the hidden factory Menu. Normally, there is not a way to Flash the bios to monitor client. This is only done at the factory. Even if you were to do a monitor Exchange, we cannot choose which revision may be provided.

  In the case of the U2410, you can Flash the bios A02. BUT if she fails and bricks the U2410, our guarantee will NOT replace it. Use it at your own risk...

  * Go here:
  http://pages.SuddenLink.NET/downloaddell/U2410A02Firmware.rar
  * Download the file on your desktop rar
  * Unzip it with winrar in its own folder on your desktop
  Open the PDF file for additional instructions

• I have a few questions about HTML5 Canvas that needs answer

  I intend to start developing games using Flash Pro CC soon and recently discovered on the feature of HTML5 Canvas. It's quite new to m, so I was curious to know certain things.

  1. What is the HTML5 Canvas and is commonly used to make games?

  2 should. what kind of code I use? (from my understanding, he uses Javascript)

  3 can be used to create complex games, let's say something like a Tower Defense, shooting or even multiplayer?

  4. the good tutorials on using the HTML5 Canvas game development? (preferably written)

  Thank you

  1. the HTML5 Canvas is the HTML5 Canvas. Flash uses an embedded CreateJS library version to handle it.

  2. it runs in the browser client-side then Yes, it uses JavaScript.

  3. of course, it can be used to create complex and multiplayer programs. Already used Google Maps? Google Docs? Those are all programmed in JavaScript.

  4 game in development is a subset of the programming. If you don't know JavaScript, then browse through thousands of tutorials available online.