I have a macbook pro 2010 and already have updated twice.  Should I move a third time?  I was in the apple store some time ago and they told me not to upgrade a third time.  Can I update or not and why?

I have a macbook pro 2010 and already have updated twice.  Should I move a third time?  I was in the apple store some time ago and I was told that I should not upgrade again.  Can I update or not and why?


Upgrade what to what? We don't know what you're asking. Writing an effective communities of Apple Support question.

Tags: Notebooks

Similar Questions

  • I just bought a new mouse at the Apple store today.  It does not work.  I have a logitech keyboard, not an Apple (they are too small).  My previous mouse worked.  Why not another?

    I wrote this message 4 times now!  Here it is:

    I have a MacbookPro.  I just bought a new mouse today from the Apple Store, because the little door on the back of my old we kept popping off the power.  Now a new does not work with my keyboard and the Apple screen.  I use a Logitech keyboard, with which I have never had problems using the old mouse.  The batteries seem to work.  What is the problem?

    What is a wired mouse or a wireless mouse?

  • My wife 6 iPhone would not take a charge.  The Apple store in Raleigh NC replaced with what they said, it was a NEW pohone.  I suspect that it was not new, but handed to nine. Can I know the serial number if it is new or refurbished?

    Tooke, he calls to the Apple store in Raliegh NC.  They were replaced with what they said, it was a NEW phone for $299.  I suspect that the phone is not NEW but handed to nine.  I can top by the serial number if the new or refurbished?  Number of Sedrial is FD * 5MD

    < personal information under the direction of the host >

    In general the replacements are not new.  They can be given to nine units, which are like new, maybe better.

    Apple has no obligation to provide a new iPhone in replacement under warranty or out of warranty replacement.

  • Update of my Macbook Pro (2010) to El Capitan?

    Hi all

    I've been planning to update my Macbook Pro 2010 at El capitan. But, I have only updated the software once before, to Snow Leopard, so I don't know if my mac can handle the transition. I want to upgrade because I hope that it will speed up my macbook. Any thoughts on the weather or not I should update?

    Thank you!

    The only way to know for sure how the MBP will respond to El Capitan is to install it.  However, you might want to install El Capitan on a different HARD disk or another volume and try it first before commit you to him.  That way, if she does she not suit you, you can easily return to Snow Leopard.

    If you have not already 8 GB of RAM installed in your 2010 MBP, I suggest that you do.  El Capitan likes to use a lot of RAM.  The best sources of RAM compatible Macs are OWC and Crucial.


  • Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

    Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

    What specific mouse?

  • I have a Macbook Pro laptop and Firefox Start Page will automatically load to turn on my computer. How can I disable this?

    I don't want a Start Page for Firefox to load automatically when I turn on my computer. help, I searched gave the suggestion (s) to your desktop go to start menu and run a system configuration to disable Firefox as start - I have a Macbook Pro laptop and have not been able to figure out where I can do the same thing - need help please

    Look in System Preferences > accounts > login items and remove Firefox from this list.

  • Hello I have a macbook pro 2011 and in a few days I had my swelling of the battery and after that I ordered a new and only for a day, it uses my new battery began to swell again, what could be the problem? Help me, I am a student that I can't do it by new

    Hello I have a macbook pro 2011 and in a few days I had my swelling of the battery and after that I ordered a new and only for a day, it uses my new battery began to swell again, what could be the problem? Help me, I am a student that I can't do it by new

    is it because of power problems?

    Take it back to the Apple Store and ask them to check it out. It should be under warranty. Bring the MBP along too. It sounds like there might be a problem with it.

  • I have a MacBook Pro 2013 and installed from a disc of Lightroom 3.  I enter my serial number and it tells me it's wrong.  Why won't this work?

    I bought the product, have a serial number, and when I go to install from a superdrive drive, he told me that my serial number is not valid.  I have a MacBook Pro 2013 and it running Yosemite 10.10.5

    Thank you much for the help!


    Please see the links below.

    Hope this will help you.

    Kind regards

    Hervé Khare

  • My Macbook Pro does'nt connect after update to 10.11.6

    Hi all.

    After update from my Macbook Pro to 10.11.6 he starts, but after entering my password, then pressing enter shows the loading animation and it is.  I let him go lastnight believe he worked at something after the update, but this morning, nothing...

    An advise, please.

    Kind regards


    Please take each of these steps that you have not already tried it. Some of them are not applicable to your model or your situation. Stop when the problem is resolved.

    To restart a computer is not responding, press and hold the power button for a few seconds until the unit turns off, then release, wait a few seconds and press again briefly.

    Step 1

    The first step to respond to a startup failure is to secure data. If you want to keep the contents of the boot drive and you have not already at least a current backup, you should try to back up now, before we do anything else. It may or may not be possible. If you don't care the data changed since the last backup, you can skip this step.

    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to store backup data.

    a. starting the partition recovery or an hour Local Machine backup volume (button option key at startup). When the OS X Utilities appears, launch disk utility and follow the instructions in this article to support. You'll be 'restoration' the boot on the backup volume volume.

    If you use 2 FileVault, you must first unlock the boot volume. Select its icon ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu. When you are prompted, enter your login password.

    (b) If step 1 fails due to disk errors, and no other Mac is available, then you may be able to save some of your files by copying them in the Finder. If you already have an external hard drive with OS X installed, the start of it. Otherwise, if you have access to the Internet, follow the instructions on this page to prepare the external hard drive and install OS X on it. You will use the installation program of recovery, rather than download it from the App Store.

    c. If you have access to a Mac, and it work and have both the non-working Mac FireWire ports or stroke, start the Mac non-working in target disk mode. Work Mac to copy the data to another drive. This technique will not work with USB, Ethernet, Wi - Fi or Bluetooth.

    d. If the internal drive of the non-working Mac is replaceable by the user, remove it and climb into a docking station that is pregnant or an external drive. Use another Mac to copy the data.

    Step 2

    If you have booted from an external drive, make sure that the internal boot volume is selected in the pane of the system preferences Startup disk.

    Start in safe mode. Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. If you do not see the words "Safe Boot" in the start screen, you did not start in safe mode. Ask for additional instructions.

    Safe mode is much slower to boot and run as normal, and some things don't work at all, including the networks without wire on some Macs.

    The login screen is displayed even if you normally connect automatically. You must know the password for the connection to connect. If you have forgotten the password, you will have to reset it before you begin.

    If the startup progress bar gets stuck for more than a few minutes, or the system stops automatically when the progress bar appears, the boot volume is corrupted and the player is probably defective. In this case, go to step 9. If you have another problem with the player, replace it immediately.

    If you can start and log in in safe mode, empty the trash and then open the window of info on the boot volume ("Macintosh HD", unless you have given it a different name.) Make sure you have at least 9 GB of space available, as shown in the window. If you do not, copy as many files as necessary on another volume (not another folder on the same volume) and delete the originals. Deletion is not complete until you empty the trash again. This, until the space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)

    If the boot process hangs again, the problem is probably caused by third-party software you have installed. Ask for additional instructions.

    Step 3

    If the startup process stops at a gray screen together with a mobile cursor, then the logon dialog box may be active but not visible because of a bug. You may be able to connect by using the arrow keys or the cursor to select the password field and type your password as usual.

    Step 4

    Case of failure of step 3, the boot volume can be complete. If you saw previously implemented guard space drive is low, it is certainly the case. You might be able to start in safe mode , even if you cannot boot normally. Otherwise, boot from an external hard drive, or well technology for step 1b, 1 c or 1 d allows to mount the internal drive and delete some files. According to the documentation from Apple, you need at least 9 GB of free space on the boot (as shown in the Infolog) for normal operation volume.

    Step 5

    If a Mac desktop (without the built-in keyboard) crashes on a gray screen together with a mobile cursor, the keyboard may not be recognized. Hold down the button on the side of a wireless Apple keyboard to make it discoverable. If need be, replace or recharge the batteries. If you use a USB keyboard connected to a hub, connect it to a built-in port.

    Step 6

    Sometimes, a startup failure can be solved by resetting the NVRAM.

    Step 7

    If there is an integrated optical drive, a disk may be stuck in there. Follow these instructions to remove it.

    Step 8

    Press and hold the power button until the unit turns off. Disconnect all devices wired except those needed to start and remove all aftermarket expansion cards. Use another keyboard and/or mouse, if these devices are wired. If you can start now, one of the devices that you disconnected, or a combination of both, the origin of the problem. Discover that it is a process of elimination.

    Step 9

    Launch the utility disk in recovery mode (see step 1). Select the boot volume, and then run the repair disk. If problems are found, repeat until that clear. If disk utility reports that the volume is not repairable, the drive is defective and must be replaced. You can choose to tolerate such malfunction in the reader's life. In this case, delete the volume and restore it from a backup. If the same thing happens again, replace the drive immediately.

    It is one of the rare situations where you must also run repair permissions, ignoring the erroneous warnings, that it can produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.

    Step 10

    If the boot device is an aftermarket SSD, it may have an update and/or a forced "garbage collection". Instructions how to do this with a Crucial SSD of brand have been posted here. Some of these instructions may apply to other brands of SSDS, but you should check with the technical support of the provider.

    Step 11

    Reinstall the OS. If the Mac has upgraded an earlier version of Mac OS X, you need the Apple ID and password used to upgrade.

    Step 12

    Do as in step 11, but this time clear the disk utility boot volume before installing. The system should automatically restart in The Migration Wizard. Follow the prompts to transfer data from one Time Machine or another backup.

    Step 13

    This step applies only to models that have a battery logic-board ("PRAM"): all of the Mac Pro, MacBook with a removable main battery and a few others (models not updated). A flat battery logic-board may cause a boot failure. In general the failure will be preceded by the loss of the system and boot disk clock settings. Refer to the user manual for replacement instructions. You may need to take the machine to a provider of services to have to replace the battery.

    Step 14

    If you get this far, you probably deal a hardware failure. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

  • my macbook pro (2010) hard drive stopped accepting a disc - eject just when put in the drive. There is no drive that is stored in the drive

    disc drive has stopped working on macbook pro 2010 - any ideas?

    Try SMC and NVRAM resets:



    If it is with all types of drives and media, the drive may have failed.  A genius bar for a FREE assessment appointment is a good option.


  • Windows 10 on MacBook Pro 2010 13 mi

    Hello! I am trying to install the Nvidia drivers, but does not have all

    I have a MacBook Pro 2010 2.4 6 GB Ram Nvidia 320 M (only compatibility issue)

    When I install the driver: (15,56 327, 23 - 296.72-)


    or 295.73-notebook-win7-winvista-64bit-international-whql

    or 15.56-nforce-winvista-win7-64bit-international-whql

    with support for windows 7 and still being run as administrator

    At half way installation my screen becomes black for a while and the mac restarts with no driver installed.

    In the Device Manager - other devices (SM Bus controller - Video Controller (VGA)) if updated drivers it also breaks

    And the brightness controller does not work.

    Any thoughts?

    The Mid 2010 MacBook Pro 13 inch support not Windows 8.1 or 10.

    You can use the version latest is Windows 7.

    The drivers are not compatible.

  • iPhone 6 s 4 K video on iMac MacBook Pro 2010/2011

    If I take 4K video on my iPhone 6s and import it on my iMac MacBook Pro 2010/2011 will be playing the video and watch as she lets say a new iMac 4 / 5K?  iMovie and final cut PRO supports 4K video for editing right?

    It will look like at its native resolution. On your Mac, the displayed video will be reduced as a result of your visible area onscreen.  That does not mean the video will look terrible, but not so good that it would have on the 4 k or 5 k.

  • Macbook Pro 17 "since mid-2007 update

    Hi all

    I currently have a MBP 17 "bought mid-2007.

    So far, the computer is doing well (for a 9yo computer). I just upgraded to El Capitan without problem. However, for some years now, my computer is slow (which is I guess than expected).

    I was trying to update.

    Here is the info:

    MacBook Pro (17-inch 2. 4 GHZ)

    Processor 2.4 GHZ intel core 2 Duo

    Memory 2 GB 667 MHz DDR2 SDRAM

    Graphics NVIDIA GeForce 8600M GT 256 MB

    I would be interested in upgrading my RAM and also do a SSD upgrade.

    RAM upgrade

    As I understand it, with my mac, I go to 4 GB of RAM. In this regard, I have 2 questions:

    -is it worth it for me to update the RAM (I am currently using on average 1.7 GB / 2 GB of RAM)

    Should-2x2gb RAm I buy? I looked a little, but I can't find exactly the name of 667 MHz DDR2 SDRAM for 2x2gb... Would be Crucial 4 GB Kit (2GBx2) DDR2-667 SODIMM memory for Macdo the trick?

    SSD upgrade

    Today, the mbp is a 160 GB SATA drive. For me, 160 GB is quite small, I'm always struggling with space when I barely programs on.

    Is it worth updating the SSD in my case?

    If so do you have any recommendations on what SSD to buy it?

    I've never updated before mac so your knowledge and your comments are very much appreciated!

    Thanking you in advance for your help

    See you soon!

    Hi Aqualover001:

    Congratulations on maintaining your Macbook Pro going for so long.

    You can actually improve your memory 6 GB. http://eShop.MacSales.com/search/MacBook+Pro+2007

    El Capitan uses a lot of memory. I have a Macbook Pro 2011 and had 4 GB of memory and found it was not enough. I upgraded to 8 GB and it works well.

    I don't know if you can add a SSD, but I found a video on installing a hard drive, but it seems a little involved. Here is a video to view. https://www.YouTube.com/watch?v=K9r1UAVq9AU

    Maybe someone else who has a 2007 can comment on the SSD.


  • MacBook Pro freezes and restarts when holding

    My Macbook Pro (MacBookPro9, 1 or MD103LL/A 2.3 GHz, OSX 10.11.4 i7) Decides to freeze and restart when lifted with the metal part under the trackpad and around it. It also does the same thing if I let my elbows on the same premises. What may be problem causing it? The machine already fell from anywhere and so, but suddenly decided to act strange. I opened the cover back after this problem and cleaned of dust or debris but did not find a noticeable amount either. The HARD drive has been replaced by an SSD at the Apple Store Amsterdam (Leidseplein) about 3 years ago and the problem has occurred for about a year.

    I would speculate that there is a bad internal connection.  Can you reproduce this every time?  If so, you may be able to locate it.

    Try an Apple Hardware Test.  It could offer a clue:


    Note that an error free AHT is inconclusive.


  • question panic core MacBook pro 2010


    I have a Macbook pro 2010 15 inches in two days I'm facing because of kernel panic, newspapers has been attached below, if I keep on my laptop 10-12 hours, then restarted once a day, in the night of time otherwise its fine. I read on nvidia gpu issue here so I made apple hardware test but his find nothing wrong, I do not understand the time its gpu or os problem issues please help

    Anonymous UUID: 9741D7F6-9462-95DA-383B-85015C6E74EC

    Killed Dec 29 12:04:42 2015

    Panic report *.

    panic (the appellant 2 cpu 0xffffff7f89456c1b): "panic GPU: 7f [] 3 3 0 0 0 0 3: NVRM [0 / 1:0:0]: error 0 x 00000100 reading: CFG 0xffffffff, 0xffffffff, 0xffffffff, BAR0 0xd2000000 0xffffff80ae3a0000 eMuxControl/kext/GPUPanic.cpp:127 P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.10.25/src/Appl 0x0a5480a2, D0,

    Backtrace (2 CPU), Frame: Return address

    0xffffff809c3bae40: 0xffffff800672ad21

    0xffffff809c3baec0: 0xffffff7f89456c1b

    0xffffff809c3bafa0: 0xffffff7f872c2b9f

    0xffffff809c3bb060: 0xffffff7f8738c18e

    0xffffff809c3bb0a0: 0xffffff7f8738c1fe

    0xffffff809c3bb110: 0xffffff7f8760b056

    0xffffff809c3bb240: 0xffffff7f873af82d

    0xffffff809c3bb260: 0xffffff7f872c95f1

    0xffffff809c3bb310: 0xffffff7f872c70fc

    0xffffff809c3bb510: 0xffffff7f872c8a4b

    0xffffff809c3bb5e0: 0xffffff7f88988b37

    0xffffff809c3bb6b0: 0xffffff7f889b47de

    0xffffff809c3bb740: 0xffffff7f8899c547

    0xffffff809c3bb7a0: 0xffffff7f8899ce53

    0xffffff809c3bb7f0: 0xffffff7f8899d1c0

    0xffffff809c3bb860: 0xffffff7f8899da11

    0xffffff809c3bb8a0: 0xffffff7f889690f5

    0xffffff809c3bba20: 0xffffff7f8899a3c1

    0xffffff809c3bbae0: 0xffffff7f88967c15

    0xffffff809c3bbb30: 0xffffff8006cfff36

    0xffffff809c3bbb60: 0xffffff8006d0165b

    0xffffff809c3bbbc0: 0xffffff8006cfede3

    0xffffff809c3bbd00: 0xffffff80067e1307

    0xffffff809c3bbe10: 0xffffff800672ef8c

    0xffffff809c3bbe40: 0xffffff80067139f3

    0xffffff809c3bbe90: 0xffffff800672429d

    0xffffff809c3bbf10: 0xffffff800680231a

    0xffffff809c3bbfb0: 0xffffff80068344c6

    Extensions of core in backtrace:

    com.apple.driver.AppleMuxControl (3.10.25) [752C63EA-73E8-39BC-8225-3A97D0C403BF] @0xffffff7f89448000-> 0xffffff7f8945bfff

    dependency: com.apple.driver.AppleGraphicsControl (3.10.25) [3DC2F93F-5197 - 3B 16-8975 - 0142E7A0 474B]@0xffffff7f89440000

    dependency: com.apple.iokit.IOACPIFamily (1.4) [70E2B65E-A91A-3522-A1A0-79FD63EABB4C] @0xfffff f7f871a9000

    dependency: com.apple.iokit.IOPCIFamily (2.9) [05578B0B-C99C-3A87-9F3E-B4746D19CEF4] @ 7f86f24000 0xffffff

    dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [8922721D-5517-3883-BD3A-57422D0244A0] @0 xffffff7f8721b000

    dependency: com.apple.driver.AppleBacklightExpert (1.1.0) [65E3187E - B-36E9-bi33-1B13ABB058 949, 1A]@0xffffff7f89443000

    com.apple.nvidia.classic.NVDAResmanTesla (10.0) [796AE430-39FB-3255-8161-D52AFA28 EE2B]@0xffffff7f87272000-> 0xffffff7f874dbfff

    dependency: com.apple.iokit.IOPCIFamily (2.9) [05578B0B-C99C-3A87-9F3E-B4746D19CEF4] @ 7f86f24000 0xffffff

    dependency: ffff7f87262000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [7372D580-6DDE-3457-B043-49B8447FC9D2]

    dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [8922721D-5517-3883-BD3A-57422D0244A0] @0 xffffff7f8721b000

    com.apple.nvidia.classic.NVDANV50HalTesla (10.0) [7FE40648-F15F-3E18-91E2-FDDDF4C DA355]@0xffffff7f874e6000-> 0xffffff7f8778ffff

    dependency: com.apple.nvidia.classic.NVDAResmanTesla (10.0.0) [796AE430-39FB-3255-8161-D52AFA 28EE2B]@0xffffff7f87272000

    dependency: com.apple.iokit.IOPCIFamily (2.9) [05578B0B-C99C-3A87-9F3E-B4746D19CEF4] @ 7f86f24000 0xffffff

    com.apple.GeForceTesla (10.0) [8DF807C1-6010-309A-93B2-27E66838B51B] @0xffffff7f88 955000-> 0xffffff7f88a22fff

    dependency: com.apple.iokit.IOPCIFamily (2.9) [05578B0B-C99C-3A87-9F3E-B4746D19CEF4] @ 7f86f24000 0xffffff

    dependency: ffff7f87262000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [7372D580-6DDE-3457-B043-49B8447FC9D2]

    dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [8922721D-5517-3883-BD3A-57422D0244A0] @0 xffffff7f8721b000

    dependency: com.apple.nvidia.classic.NVDAResmanTesla (10.0.0) [796AE430-39FB-3255-8161-D52AFA 28EE2B]@0xffffff7f87272000

    Corresponding to the current thread BSD process name: WindowServer

    Mac OS version:


    Kernel version:

    14.5.0 Darwin kernel version: kills Sep 1 21:23:09 PDT 2015; root:XNU-2782.50.1~1/RELEASE_X86_64

    Kernel UUID: 06D286E3-A8A1-3BE7-A7EB-EAC6E0C69758

    Slide kernel: 0 x 0000000006400000

    Text of core base: 0xffffff8006600000

    Text __HIB base: 0xffffff8006500000

    Name of system model: MacBookPro6, 2 (Mac-F22586C8)

    Availability of the system in nanoseconds: 6410561734918

    last load kext to 56152200828: 601.01.60f01 com.eset.kext.esets - kac (addr 0xffffff7f89579000 size 81920)

    Finally unloaded kext to 222926837674: com.apple.driver.AppleUSBUHCI 656.4.1 (addr 0xffffff7f87afe000, size 65536)

    kexts responsible:

    601.01.60f01 com ESET.kext.esets - kac

    601.01.60f01 com ESET.kext.esets - pfw

    com ESET.kext.esets - mac 601.01.60f01

    com.tuxera.filesystems.tufsfs.fusefs_txantfs 2015.6.24

    com Apple.filesystems.msdosfs 1.10

    com.apple.driver.AudioAUUC 1.70

    com.apple.driver.AppleHWSensor 1.9.5d0

    com.apple.driver.AGPM 110.19.6

    com Apple.filesystems.autofs 3.0

    com.apple.iokit.IOBluetoothSerialManager 4.3.6f3

    com.apple.driver.AppleOSXWatchdog 1

    com.apple.driver.AppleMikeyHIDDriver 124

    com.apple.driver.AppleHDA 272.18.3

    com.apple.iokit.IOUserEthernet 1.0.1

    com.apple.GeForceTesla 10.0.0

    com.apple.Dont_Steal_Mac_OS_X 7.0.0

    com.apple.driver.AppleHWAccess 1

    com.apple.driver.AppleMikeyDriver 272.18.3

    com.apple.driver.AppleHV 1

    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.6f3

    com.apple.driver.AppleSMCLMU 2.0.7d0

    com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

    com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

    com.apple.driver.AppleLPC 1.7.3

    com.apple.driver.SMCMotionSensor 3.0.4d1

    com.apple.driver.AppleSMCPDRC 1.0.0

    com.apple.driver.AppleUpstreamUserClient 3.6.1

    com.apple.driver.AppleIntelHDGraphics 10.0.0

    com.apple.driver.AppleIntelHDGraphicsFB 10.0.0

    3.10.25 com.apple.driver.AppleMuxControl

    com.apple.driver.AppleMCCSControl 1.2.12

    com.apple.driver.AppleUSBTCButtons 240.2

    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

    com.apple.BootCache 36

    com.apple.driver.AppleUSBTCKeyboard 240.2

    com.apple.driver.AppleIRController 327,5

    com.apple.driver.AppleUSBCardReader 3.5.5

    com.apple.iokit.SCSITaskUserClient 3.7.5

    com.apple.driver.XsanFilter 404

    com.apple.iokit.IOAHCIBlockStorage 2.7.1

    com.apple.driver.AirPort.Brcm4331 800.20.24

    com.apple.driver.AppleAHCIPort 3.1.2

    com.apple.driver.AppleFWOHCI 5.5.2

    com.apple.driver.AppleUSBHub 705.4.2

    com.apple.iokit.AppleBCM5701Ethernet 10.1.3

    com.apple.driver.AppleUSBEHCI 705.4.14

    com.apple.driver.AppleSmartBatteryManager 161.0.0

    com.apple.driver.AppleACPIButtons 3.1

    com.apple.driver.AppleRTC 2.0

    com.apple.driver.AppleHPET 1.8

    com.apple.driver.AppleSMBIOS 2.1

    com.apple.driver.AppleACPIEC 3.1

    com.apple.driver.AppleAPIC 1.7

    com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

    com Apple.NKE.applicationfirewall 161

    com Apple.Security.Quarantine 3

    com.apple.security.TMSafetyNet 8

    com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

    3.10.25 com.apple.AppleGraphicsDeviceControl

    com Apple.kext.Triggers 1.0

    com.apple.iokit.IOSerialFamily 11

    com.apple.driver.DspFuncLib 272.18.3

    com.apple.kext.OSvKernDSPLib 1.15

    com.apple.iokit.IOSurface 97.4

    com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0

    com.apple.nvidia.classic.NVDAResmanTesla 10.0.0

    com.apple.iokit.IOFireWireIP 2.2.6

    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.6f3

    com.apple.iokit.IOBluetoothFamily 4.3.6f3

    com.apple.driver.AppleHDAController 272.18.3

    com.apple.iokit.IOHDAFamily 272.18.3

    com.apple.iokit.IOAudioFamily 203.3

    com.apple.vecLib.kext 1.2.0

    com.apple.iokit.IOUSBUserClient 705.4.0

    com.apple.driver.AppleSMBusPCI 1.0.12d1

    com.apple.driver.IOPlatformPluginLegacy 1.0.0

    com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

    com.apple.driver.IOPlatformPluginFamily 5.9.1d7

    3.10.25 com.apple.driver.AppleGraphicsControl

    com.apple.driver.AppleBacklightExpert 1.1.0

    com.apple.driver.AppleSMC 3.1.9

    com.apple.iokit.IONDRVSupport 2.4.1

    com.apple.driver.AppleSMBusController 1.0.13d1

    com.apple.iokit.IOGraphicsFamily 2.4.1

    com.apple.driver.AppleUSBMultitouch 245.2

    com.apple.iokit.IOUSBHIDDriver 705.4.0

    com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.5

    com.apple.iokit.IOUSBMassStorageClass 3.7.2

    com.apple.driver.AppleUSBMergeNub 705.4.0

    com.apple.driver.AppleUSBComposite 705.4.9

    com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.5

    com.apple.iokit.IOBDStorageFamily 1.7

    com.apple.iokit.IODVDStorageFamily 1.7.1

    com.apple.iokit.IOCDStorageFamily 1.7.1

    com.apple.iokit.IOAHCISerialATAPI 2.6.1

    com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.5

    com.apple.iokit.IOAHCIFamily 2.7.5

    4.5.8 com.apple.iokit.IOFireWireFamily

    com.apple.iokit.IO80211Family 730.60

    com.apple.iokit.IOEthernetAVBController 1.0.3b3

    com.apple.driver.mDNSOffloadUserClient 1.0.1b8

    com.apple.iokit.IONetworkingFamily 3.2

    com.apple.iokit.IOUSBFamily 720.4.4

    com.apple.driver.AppleEFINVRAM 2.0

    com.apple.driver.AppleEFIRuntime 2.0

    com.apple.iokit.IOHIDFamily 2.0.0

    com.apple.iokit.IOSMBusFamily 1.1

    com Apple.Security.sandbox 300.0

    com.apple.kext.AppleMatch 1.0.0d1

    com.apple.driver.AppleKeyStore 2

    com.apple.driver.AppleMobileFileIntegrity 1.0.5

    com.apple.driver.AppleCredentialManager 1.0

    com.apple.driver.DiskImages 398

    com.apple.iokit.IOStorageFamily 2.0

    com.apple.iokit.IOReportFamily 31

    com.apple.driver.AppleFDEKeyStore 28.30

    com.apple.driver.AppleACPIPlatform 3.1

    com.apple.iokit.IOPCIFamily 2.9

    com.apple.iokit.IOACPIFamily 1.4

    com Apple.KEC.corecrypto 1.0

    com.apple.kec.Libm 1

    com Apple.KEC.pthread 1

    System profile:

    Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 93), Broadcom BCM43xx 1.0 (

    Bluetooth: Version 4.3.6f3 16238, 3 services, 27 aircraft, 1 incoming serial ports

    Crush Bus:

    Memory module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D3437314235363733445A312D4346382020

    Memory module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631

    USB device: Hub

    USB device: Apple keyboard / Trackpad

    USB device: Hub BRCM2070

    USB Device: USB Bluetooth host controller

    USB device: Memory card reader internal

    USB device: Hub

    USB device: USB 2.0 Hub

    USB device: Cruzer Switch

    USB device: USB optical mouse

    USB device: ISight built-in

    USB Device: IR receiver

    Serial ATA Device: TOSHIBA MQ01ABD075, 750,16 GB

    Serial ATA Device: HL-DT-ST DVD - RW GS23N

    Model: MacBookPro6, 2, MBP61.0057.B11 of BootROM, 2 processors, Intel Core i5, 2.4 GHz, 4 GB, MSC 1.58f17

    Service network: Ethernet, Ethernet, en0

    Network service: Wi - Fi, AirPort, en1

    Graphics: integrated graphics card Intel HD, Intel HD Graphics,

    Graphics card: NVIDIA GeForce GT 330 M, NVIDIA GeForce GT 330 M, PCIe, 256 MB

    Thank you


    Before you do anything else UNINSTALL Antivirus (Eset) app.

    then restart, empty the trash.

    Don't forget to remove also in SystemPreferences-> users & groups-> LoginItems (with sign - below).

Maybe you are looking for

  • I do not have the Firefox button at the top of my screen.

    I do not have the Firefox button at the top of my screen, so cannot use any of the functions it controls. I don't have the round symbol of Firefox, but when I right click or click on it, I get only the menu for mazimizing, minimizing or closing the a

  • Execute a program at a different resolution

    I need to have a specific program to the 1024 x 768 resolution, the system usually running at 1280 x 1024. For the moment I will have to go into Control Panel and change the resolution before running it manually then change it back after, which is no

  • Priority instead of silent mode

    When connecting to my charger, my phone should go in silent mode using Smart Connect. But sometimes he spends in priority mode. Is this something that could be repaired? TNX

  • How to transform a primary partition to logical partition

    Hello I just bought a laptop computer HP Probook 4330 s, product number - A6D89EA #ABB, with 64-bit Windows 7 Professional preinstalled on it. My problem is I can not reduce the C Partition and another partition to keep my data or install another OS

  • My cell phone doesn't work wifi

    Just recently my laptop no longer has access to my router which is connected to our basic computer.usually I turn the router on it and all systems go. There is nothing wrong with the router because my ipod touch always takes the connection. Last week