I have DFX Enhancer, it allows to work in wmp 11, now, it will not,
DFX won't work in wmp 11 or you tube in mozilla, but it will work in Internet Explorer you tube. I also have mp3 rocket and it's going to work. What is going on? Help
It's an audio amplifier as the srs that is partially in wmp and problem solved by the restoration, which also fixed the same problem in mozilla improving music in tube you thanks for the quick reply
Tags: Windows
Similar Questions
-
With rendering problems. Rendering started taking 10 times longer. I have a lot of memory, I cleaned the media cache and now it will not even made a single wipe small transition. Goes at the beginning of the timeline, as if she has made the effect.
I determined the cause. Damaged media. Copy old sequence in new chronology cross me if I return after any change in the timeline. I am able to export own media. No change to hardware and software recently. I'm running Windows 10. (Hatred, dating back to 7)
-
I downloaded a plugin (module) of Facebook on my toolbar and it made my whole computer run slowly. I disabled the add-on, removed the toolbar, and everything was always super slow. I went troubleshooting and press reset firefox. It was in the process of resetting, and my screen went black. I thought it was just the screensaver, but after pressing the space bar, screen did not return. I have made a difficult exit on my Mac and restarted my computer. On my desk, there are now a record that says "Old Firefox Data". When I try to open firefox I get a message stating "unable to load your firefox profile. It may be missing or inaccessible. I tried to reinstall firefox, for example, to have the same result. Help!
The name of the file should not be mozilla-bin, but firefox-bin
-
None of my function keys (F1 - F12) works with the exception of the ESC key. They worked fine yesterday, but now they do not have.
How can I fix this?
I use the SHIFT + F7 work much and would really appreciate help in getting up and running.
Thank you
Check if you have an F LOCK key in the top right of your keyboard.
If this is not the case, try a system restore:
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
See you soon.
Mick Murphy - Microsoft partner
-
Comment do pay change the VAT number, even after trying all possibilities to contact you? Car I have to renew my subscription it works like pay the time. If not can I make a new account and keep all my videos are that they do is delete? Thank you!
Hello Anthony, I just talk to an officer on the support of the cat, its ok for me!
So to other consumers of the same question:
Go to this page: https://helpx.adobe.com/contact.html?step=CCSN_membership-account-payment_change-or-upgrad e-tone-subscription
Then click on the blue button "still need help? Contact us. "
Then click on the option contact fist > 'Chat '.
Wait a few seconds and then be cool, ask to change the VAT number and wait... the agent will make the change...
You will receive an email within 2-3 days to confirm the change (to the used email registration)!
That's all!
-
Hello... I have Windows Vista 32-bit, and auto racing seems to be disabled. Before I was able to insert a music cd and Autorun will go up, now it will not auto run open. I looked in the help, but I found nothing on how to enable automatic execution. I speak not autoplay. I need assistance with automatic execution. Thank you!
original title: AutoPlayHello
You can fix the error in reading auto/AutoRun.
AutoRun/AutoPlay does not work when a CD/DVD is inserted
http://vistasupport.MVPs.org/autorun_autoplay_don't_work_when_cddvd_is_inserted.htmAutoPlay - Autorun does not not under Vista
http://www.mydigitallife.info/2008/01/14/autoplayautorun-not-working-or-missing-not-open-in-Windows-Vista/Troubleshoot AutoPlay
http://windowshelp.Microsoft.com/Windows/en-us/help/3ab73757-6b67-4e3c-80b1-a75651c7a9451033.mspxCleanHandlers - AutoPlay Cleanup utility
http://WindowsXP.MVPs.org/autoplayhandlers.htmSee this and also scroll the messages below.
How to change the settings for AutoPlay Vista
http://www.Vistax64.com/tutorials/78021-AutoPlay-settings.htmlIn the opposite direction might help.
How to add entries customized AutoPlay in Windows Vista
http://www.vista4beginners.com/add-custom-entries-to-Windows-Vista-AutoPlayI hope this helps.
Rob Brown - 21/04/2012 Mariners vs Chicago - Phil Humber pitched a perfect game!
-
Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another program.
Hi rkusa1,
Thank you for using Microsoft Windows forum
QuickBooks worked very well under Vista? It should also work reliably on Windows 7.
However, you may want to follow these steps.
1. right click on your quickbooks start exe file and open properties.
2. on the Compatibility tab, select the compatibility mode and run this program in compatibility mode for Windows using the following link: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows (only if she worked very well with former Windows operating system)
3. the control privilege level "Run this program as Administrator". Press apply/OK to close properties.
4. start - devices and printers - add a printer - add a local printer - create a new port - local port and name it QBD_PDF.
5. Choose install AMYUNI Technologies - Amyuni Document Converter 300 (click the button update windows if it is not on your list).
6. If windows detects you already have a driver and then choose to replace the current driver. The printer name Quickbooks PDF Converter - do not share the printer - NOT set as the default printer. Finishing
7. start right click - devices and printers - printer QB, choose printer - properties and go to the Advanced tab.
8. remove the checkmarks in the 4 elements with square next to them (lower part of the screen) boxes, and then select "Print directly to the printer" press OK to close the window.
9 restart you computer and open Quickbooks. Open the file - printer installation and make sure of Quickbooks PDF Converter is selected for any operation PDF printer that you use frequently. (on rare occasions, you will see not of Quickbooks PDF Converter on the list, reboot again and you'll get it).
You can now perform operations of PDF in Quickbooks (works for 32 and 64-bit Windows 7)
For a similar question, see: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/2bd30024-0a64-4f6b-a831-8cb7c1e4cce5
If the steps above do not post your question in this link: http://community.intuit.com/quickbooks
Kind regards
Aziz Nadeem - Microsoft Support -
I have a 2008 iMac - how do Yosemite or El Capitan. Sierra will not install.
I have a 2008 iMac - how do Yosemite or El Capitan. Sierra will not install (I want either the hack).
I never 'got' Yosemite or El Capitan when they were available on the Mac App Store.
The only way I've found is to get it on Apple's developer site, but I'm not a developer. Apple how to flip the switch to the Mac App Store so that it shows up on top of my list?
On this iMac, you should still be able to download El Capitan:
-
How can I change my country when I have a balance that I can't buy anything with? It will not change me cause I have a balance of 0.07 pence
Click here and ask the staff of the iTunes Store to zero the balance of your account.
(142584) -
I bought the IPad Pro 128 GB on 3.29.2016. I used it for less than a week. It charged when I first opened it from 67% to 100%. 9.3.1 update. After about 5-6 days, the battery is down to 1%, and now it will not load. I have reset to factory settings and it still doesn't load. There's just 1%. Help, please.
Thank you
Katie
It is under warranty. Suggests taking it for an Exchange.
-
I have never installed my MS when I bought my PC and now it will not accept the product key, how can I get a new key
What "MS"?
Microsoft is a company, not a product.
To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
(download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
Once saved, run the tool.
Click on the button continue, which will produce the report.
To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
-* in your own thread *, pleasePlease also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
http://www.Microsoft.com/en-us/howtotell/hardware.aspx -
Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not. Help, please. It has been stable over the years and now it will not work. I get no help when I diagnoise of problems, but I never. It has been checked and rechecked. PitStop does not even recognize a problem. I could change the homepage, but I prefer to use Google if it works. Frustrating.
You may need to update your toolbar, google has made some changes just about everything and possibly that the page is not where it used to be.
-
I've updated Illustrator CS6 by CC (I also Illustrator CC installed for work) and now CS6 will not open say that missing a bunch of plugins. Any ideas on how to solve this problem?
Try the "all Apps" in blue on the right, there is another menu in the menu drop down, below people say "See the previous Versions..."
-
Initially, I downloaded the application and was able to access all my photos by album, photostream, fb, etc.. Now, it will not go all. After you remove the application and try to download it, it says that I have to pay for it (yet) any help would be appreciated.
Sounds like a question of verification on any market that you have bought PS Touch. Have you tried contacting Google and Apple to see what they say?
-
13 elements will not work with the new camera, it will not be updated raw 8.7.1
13 elements will not work with the new camera, it will not be updated raw 8.7.1. I downloaded the patch, installed, but the old version is it in elements. Thank you, esther
Try again a little later. Sometimes the Adobe servers are busy. If you get the same answer, you may need to uninstall and reinstall. Try an alternative link, then confirm with your 24-digit serial number - click here to download PES
Maybe you are looking for
-
How to configure universal Clipboard
Members of the Community dear apple: I've recently updated to ios10 and mac os x Sierra and I want to know how to execute the function universal Clipboard on my mac and iphone Thank you
-
I accidentally hit voice on in settings for my Iwatch and now I can't go down. I can't access anything more. Can someone help, please.
-
OfficeJet pro 8630: Officejet pro 8630 does not print documents from microsoft work.
Microsoft Word and Excel documents (Office Suite 2013) not print not... not even a reeling. All the rest reels and prints. Printing a shaw wireless router.
-
Y at - it no tool for configuration CE500 over ports to 2960. The config CE500 has much more that it is necessary. Is it necessary for the process to do manually?
-
FlexVPN has spoke-to-Spoke routing Override loop
I have a router spoke, that hat of router routing to inside192.168.1.0 255.255.255.0 next hop is 10.1.1.1(10.1.1.0/29 is the transfer network): IP route 192.168.1.0 255.255.255.0 10.1.1.1 After active the FlexVPN I get the substitution of routing, an