I have improved my AZC-606 to 10 Windows without updating the BIOS of last year

Similar Questions

• I have improved my all-in-one for windows 8 and the touch screen does not

  Hello, I have an acer aspire one, and I just bought and installed upgrading windows 8 from the Microsoft site. He installed an "auditor of system" 1 who reported a few minor problems, but none of them were associated with wifi or touchscreen. after upgrade both the touch screen or wifi do any work! Good start of Microsoft! Why can't just work? "Anyway - I googled a little and found this is normal and I should have installed a pre-upgrade Acer 1 pack?  Is is true that I can't find it anywhere and I wonder if it exists, can someone point me in the right direction and also let me know if I can install it now that I have already installed windows8! Thank you all

  FReeZA... Thanks a lot for your help!  everything is working now and Windows 8 work well on this machine!  I also had to upgrade the driver for the wireless card get that work and found them on this page as well as the touch driver that you sent me!  Thanks again. http://www.Acer.co.UK/AC/en/GB/content/drivers

• Satellite A40: How update the BIOS because I only have half of the Bios

  Hi guys

  I went to the local with my satellite A40 computer store because I only have half of the bios!
  I sent an email to support technique German toshiba and they said to try a bios update (which put bare in mind I still don't know how to do), then we have sent my laptop in a local computer store and told them the problem they do not put me to update the bios on a processor cempron.

  Why not? What are the risks in need to know.

  Please help me because I want to in the future might be upgraded to vista?

  Hello Daniel,.

  I'm a little confused about your message from Mr.
  What do you mean with half of the bios is enough?
  What s wrong with the BIOS?

  The support from Toshiba said-> try a BIOS update.
  On the Toshiba page, you can download the BIOS for Satellite A40.

  It seems you didn't check the download page detailed because on this page you will find this statement:
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  The update of the BIOS has been detailed described in this document and that you follow these guidelines for the update of the BIOS.

  Good bye

• update the BIOS does not have: do not meet the prerequisite code 9994/9996

  BIOS update failed: did not meet requirements code 9994/9996 / model ny801av-aba HP Pavilion p6100z cto Desktop windows vista basic version of the bios 5.38, published on 20/03/09. 4 GB of ram (3.5 usable) AMD semperon - 1300 socket am2 + name code sparta.  Update BIOS of motherboard M2N68 - verision 5.49 released on 24-08-09 (am trying to go to a concert of triple-core AMD phenom 8400 2.1 it is why I am updating the bios, when I put it I have nothing).

  Figure 1: Error Message

• I have improved my i5 Ideapad Z580 to Windows 10. Big mistake?

  I took in all messages from Microsoft insisting on the fact that my computer was completely compatible and that I should upgrade to Windows 10. It does appear to me that I should have checked the Lenovo Web site first to be sure. After the upgrade, I noticed two things: (1) the system seemed to work fairly well, and (2) I couldn't find Dolby Home Theater v4 (one of my absolute favorite programs). When finally, I looked on the Lenovo Web site, I found the following page with the title, 'Dolby Home Theater does not work after upgrade Windows 10' (https://support.lenovo.com/us/en/documents/ht104006).

  When I checked the 'supported upgrade Windows 10 list' (https://support.lenovo.com/documents/ht103535), as indicated on the page, I saw that Ideapad Z580 was not on it. The page passes, saying that if your machine is not on the list, "drivers have not been updated for this machine, and Lenovo is not recommended an upgrade of Windows 10.» The page continues with possible solutions, but does it make sense to try again?

  Then I found another page site called Lenovo, 'Windows 10 Upgrade Guide - IdeaPad Lenovo Notebook' (https://support.lenovo.com/us/en/documents/ht103611). The news here was not better. He said, 'the following listed computer models include hardware components not fully compatible with Windows 10. Therefore, the upgrade of these models to 10 Windows is not recommended. "Unfortunately, Z580 is on this list.

  There are therefore, after Lenovo, hardware and software problems, and two recommendations DO NOT upgrade the Z580 to Windows 10. I did the upgrade. I have not run each program and I'm even not sure that all programs, other than the Dolby Home Theater, obtained through the upgrade (for example, Youcam have not). But the system seems to work pretty well; It may even work better she did it under Windows 7. I really miss the Dolby program. I have 30 days from July 29 to decide if I want to go back to Windows 7. So I have a few questions:

  1. as the system seems to work without major problems (outside), I should stay with Windows 10?
  2. If I stay with Windows 10, I should try the solutions described in 'Dolby Home Theater does not work after upgrade Windows 10' (https://support.lenovo.com/us/en/documents/ht104006) to restore the Dolby Home Theater?
  3. given that Lenovo has said that the Z580 has "not fully compatible with Windows 10 hardware components", am I headed for problems if I continue using Windows 10?
  4. given that pilots who do not have been updated, at least for the Dolby program and perhaps for others, it would be better to go back to Windows 7?
  5. is it possible that Lenovo will eventually update these drivers? If so, when does anyone know?
  6. I've heard that going back to Windows 7 can be very tricky. It is worth?
  7. If missing pilots as well as hardware components which are not completely compatible with Windows 10, why my system seems to work correctly?

  Sorry for the long post. I know there are some posts on this Forum that address these problems, but they are for a year - literally of August 2015 - and things possible has changed since then.

  Thank you in advance for your help!

  Hello mgsilv,

  Welcome to the Community Forums of Lenovo.

  I'll give you my view on your questions.

  1. as the system seems to work without major problems (outside), I should stay with Windows 10?

  It is up to you. The fact that your model is not supported means that Lenovo has not tested some older models. The way I see it, if not tested, there is no guarantee that it will be, or will not work.

  2. If I stay with Windows 10, I should try the solutions described in 'Dolby Home Theater does not work after upgrade Windows 10' (https://support.lenovo.com/us/en/documents/ht104006) to restore the Dolby Home Theater?

  If I were you, I will try the solutions, especially as long as you have the option to return to the previous operating system. Be sure that the system restore is enabled and works. It would not hurt to create a Restore Point before any change of Dolby. You also have an option to restore the drivers by using Device Manager in Windows 10.

  3. given that Lenovo has said that the Z580 has "not fully compatible with Windows 10 hardware components", am I headed for problems if I continue using Windows 10?

  I can't answer because I don't know what kind of changes Windows 10 will in the future, and if your hardware and/or software will continue to be compatible...

  4. given that pilots who do not have been updated, at least for the Dolby program and perhaps for others, it would be better to go back to Windows 7?

  See my response to #1.

  5. is it possible that Lenovo will eventually update these drivers? If so, when does anyone know?

  I can't speak for Lenovo, but given all new computers with OEM to catch up, I doubt that they go too far back to update the drivers for the older models. You can always keep checking back to the list of compatibility and drivers on Support to see if anything changes.

  6. I've heard that going back to Windows 7 can be very tricky. It is worth?

  I have not heard that.

  7. If missing pilots as well as hardware components which are not completely compatible with Windows 10, why my system seems to work correctly?

  It has not been tested. This does not mean that it has been tested and failed.

  Sorry for the long post. I know there are some posts on this Forum that address these problems, but they are for a year - literally of August 2015 - and things possible has changed since then.

  For some models there.

  If I were you, I would continue to use 10 for a week or so just to be sure everything works (printer, ports, your old software, etc.). If you can't get absolutely Dolby or anything else to work, weigh priorities, taking the Windows 7 End of SupportDates.

• HP just update the bios on my computer and now I have no sound.

  I have a HP Pavilion 1d67cl g6, the windows operating system 7. HP just updated bios and now I have NO SOUND. In system devices, it says everything is working normally. Nothing is cut, just NOT of HIS. Help

  Hello:

  Go back to the BIOS and the BIOS to its default values and restart.  See if get you your audio files.

  Try reinstalling the audio driver, if it does not work.

  Try a hard reset of the laptop.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & objectid = c01684768 & prodTypeId = 321957 & prodSeriesId = 3688868

  Last resort, back up your files and perform a recovery of the system back to the form of the plant.

  Paul

• I'll have NO chance of finding iPhoto on my update of the Mavericks of last year.  How to do it?

  I have Snow Leopard on my Mas purchased years ago.  I paid for the update to the Mavericks in a Mac store last year and have not been able to find the iPhoto icon to I can use it to access and organization of the photo.  I tried free downloads and nothing seems to work.  I tried one that said I had to have some 9. ? version before I can download... then I went down, down, down to earlier versions... no luck.  They say that I can't download them.  How about my update of the Mavericks iPhoto?

  You've waited too long

  iPhoto 11 (version 9.x.x) must be purchased and it is no longer available at Apple - you also have iPhoto 9.5.1 for OS X 10.9.5 and even if you buy a version of iLife 11, I do not believe that the 9.5.1 update is available, so I don't think you will be able to use iPhoto - if you can upgrade to El Captain you can migrate your iPhoto photo library and use it

  LN

• I have my windows automatic update. the other day, my windows updated and Ive had problems of e-mail and online video problems. I have vista Home premium OS. any suggestions?

  can receive email, but not able to send after the recent ('important') updates of windows have been installed.
  also can't see videos on facebook because of the mistakes because of these updates.
  I have the my windows update set to automatic and noticed these problems after an update has taken place. I did a system restore and everything worked fine. Needless to say the next day, the same thing. I even went to the windows update to manual setting, and it is always updated by itself. This made 4 consecutive days. now when I go to system restore, I don't even get the opportunity to go beyond 5 days! video errors on facebook tell me that "the video is unavailable" and "video has been deleted or is not visible because of the privacy settings. I also noticed that most installed updates are updates to windows security. and my windows update seems to be popping up constantly telling me ago over updates to install.

  Hi Unhappy72,

  I'm sorry that you are still facing the same problem. I'll be more than happy to help you.

  I have a few questions:

  (a) what version of IE are you using?

  (b) has been going through the steps to reset Internet explorer?

  (c) you have any version of Flash Player on your system?

  You can try to update the version of Flash Player for videos.

  To do this all first you need to uninstall and then go ahead and download the latest version and install it.

  To uninstall the application follow the steps given below:

  1. open programs and features by clicking on the Start button, click Control Panel, clicking programs, and then clicking programs and features.

  2. Select a program, and then click Uninstall. Some programs include the ability to modify or repair the program in addition to uninstall, but many simply offer the option uninstall. To change a program, click change or repair. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, please visit the below given link:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also check if the connection parameters are set by default.

  Make follow them the steps below:

  1. open Internet Explorer.

  2. press the Alt key on your keyboard for the file menu if it is not already there.

  3. go to tools, click on Internet Options.

  4. click on the Connections tab.

  5. at the bottom of the page, it will be a local network settings tab, click on this.

  6. check if automatic detect settings is enabled in the box, if it isn't what to choose.

  7. close all Internet Explorer Windows and reopen and check if the problem persists.

  This should solve your problem of not being able to send emails.

  You can also try to clean boot your system and then try to play the videos. This will let us know if the background services interferes with the proper functioning of your system.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  Once you have disabled all services that you can check if you are able to play the videos. If so, you can try the divide and conquer method to find what service exactly the origin of the problem. For those who follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Alternatively, you can try to disable the modules such that some add-ons can be a problem while browsing through the internet.

  To disable the modules follow the below given steps:

  1. click on the Start button, click principally made programs, on Accessories, click System Toolsand then click Internet Explorer (No Add-ons).

  For more information on the modules, please visit the below given link:

  Internet Explorer Add-ons: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Internet-Explorer-Add-ons-frequently-asked-questions

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have aspire v3 - 571 and updated the bios for him at 2.21, I wonder if I can get off at 02:04.

  I saw a video on youtube of a guy do BIOS downgrade 02:21 at 02:04 using a v3-571 (g), I wonder if I can do this procedure too! Here's the video link: https://www.youtube.com/watch?v=3QCZBy-2xaA&feature=youtu.be&list=UUN9TFke7TDA-ucprvsCNA2g thank you! Help me ;(

  I do not have this information on the compatibility of the BIOS, so I can't help you any further.

  Sorry

• Mini 311-1000NR. I lost after updating the Bios, NVIDIA graphics. I only have the standard VGA graphic

  I have a HP Mini 311-1000NR with Windows XP. After installing the update of the Bios I don't see NVIDIA video image. Instead of him, I am only the standard chart of VDA. I downloaded the driver and reinstalled but it installed only HD Audio not the NVIDIA graphics driver? How can I solve this problem? Can someone help me please?

  The problem is resolved. I installed Win7 Pro and after installing SP1, I got the graphics from NVIDIA.

  I can install the most recent driver that I have dl the NVIDIA web site

• Why have I lost my web pages centered when I updated the site?

  Need urgent help focus my web pages after you make updates to the site! Only the index page is always centered. I use an external stylesheet, but did not make any changes to it (I don't think) when I updated the site. I think I have the margins and the text defined as recommended. I must have screwed up somewhere, the CSS, but can't find it. Can someone please look at the URL?  www.labreastspecialists.com

  Change your CSS to this body.

  body, td, th {}

  do-family: "Times New Roman", Times, serif;

  color: #FCFFDC;

  Width: 960px;

  Auto margin: 0; / * with width, it is centered * /.

  }

  Correction of errors in validation of your code.

  [Valid] Validation of the markup of http://www.labreastspecialists.com/ourlocations.html - W3C Markup Validator

  W3C CSS Validator results for http://www.labreastspecialists.com/ourlocations.html (CSS level 2.1)

  Nancy O.

• I have firefox 10.0.1, after set 10 to update the text looks blurry. If I put it in safe mode, the text is very good. This could be the cause? I have reset all default modules and people with disabilities

  During operation normal text is blurred, but in safe mode, text is normal.

  Hello

  You can try deselection to use hardware acceleration when available in the Tools (Alt + T) > Options > Advanced > General, if it is enabled.

• Satellite L30-PSL33E with Win XP - do I have to update the BIOS

  Hello

  After changing OS from Vista to XP, I need to know if there upgrade bios Bios XP and actually to update all drivers for XP drivers.

  Any help, advice appreciated, cheers.

  Hello

  You don t you do something if your laptop runs correctly ;)

  Fact is that the European driver Toshiba page does what a BIOS PSL33E L30.
  It s no matter what operating system is installed. Your BIOS is the same! It s independent OS!

  XP drivers are also available on the Toshiba driver page.

  See you soon

• I have upgraded from home premium to ultimate I need to update the bios

  Help

  N °

  BIOS is cross-platform compatible.

  Just change the level (Home--> Professional--> Ultimate) in the same windows operating system requires you to update the BIOS.

• I have HP Pro 3120 Mt. - USB keyboard. To access the BIOS. How?

  Hello!

  Keyboard is connected via usb - hub on the monitor... I need to check the cable.

  I'm sorry. Thank you very much.