HP just update the bios on my computer and now I have no sound.
I have a HP Pavilion 1d67cl g6, the windows operating system 7. HP just updated bios and now I have NO SOUND. In system devices, it says everything is working normally. Nothing is cut, just NOT of HIS. Help
Hello:
Go back to the BIOS and the BIOS to its default values and restart. See if get you your audio files.
Try reinstalling the audio driver, if it does not work.
Try a hard reset of the laptop.
Last resort, back up your files and perform a recovery of the system back to the form of the plant.
Paul
Tags: Notebooks
Similar Questions
-
I accidentally deleted a program from my computer and now I have no sound or microphone.
I think I deleted a program called realtek and now there is no sound on my laptop.
[Moved from comments]
I think I deleted a program called realtek and now there is no sound on my laptop.
[Moved from comments]
you deleted your system's audio drivers... Realtek audio drivers from your pc's
Until you reinstall the Realtek related your sound audio dirver wot set
-
After that I went to El Capitan, my computer would be close and take forever to reboot. I took it to the Genuis Bar and they said it was us who extinguished the FileVault. I've updated the software on 1: 1 and now, I'm having the same problem again. The computer turns off and sometimes it takes me an hour or two to get started again. Help, please!
refer to this article and move forward with the NVRAM reset at the end.
Reset the management system (SCM) controller on your Mac - Apple Support
If the problem persists, how long have you made it Go?
I would bring out there, but first call Apple.
-
We try to update the software on a computer and continue to receive the error 1719:
We try to update the software on a computer and continue to receive the Error Message 1719: "Installer cannot access the Windows service". We tried to repair Windows install several times by the cancellation of registration registration without success. Windows Installer continues to block the update of the programWe tried to install a new version of Kaspersky and have met the above problems.
Hi Jug,
Thanks for posting the question on the Microsoft Community Forums. I understand that while trying to update the software, you get an error 1719: "could access the Windows service install.
This question is can be caused due to:
You install or remove a program that uses Microsoft Installer Service to install a program on your computer. The Windows Installer Service is not running. The Windows Installer registry settings may be damaged or wrong.
I suggest you check out the link to the troubleshooting steps.
Error "The Windows Installer could access the Service" when you install or update programs on Windows 7 or Windows Vista.
http://support.Microsoft.com/kb/2642495
WARNING:
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry
How to back up and restore the registry in Windows.
If still the problem persists after you perform the steps of troubleshooting from the link and if you have questions related to Windows, please do not hesitate to answer us, we will be happy to help you.
Thank you.
-
I've just updated to LR 6.2.1 and now I cant access the subfolders during import subfolder, hope that they address
Hi Crobadus,
Yes, this will be fixed in the next update.
Until then, you can go back to Lightroom 6.1.1 if you need to have the same workflow
Instructions to restore an earlier version of update
Kind regards
Claes
-
It has been updated the program on my computer and all of a sudden stopped at 83.3% can help
Hello
Could you please provide the name of the application you are trying to update.
Kind regards
Hervé Khare
-
I've just updated to version 4 of ADE and now I'm having problems to open the books of NetGalley review on it. I didn't have this problem before and now I get a message that says "permit to make mistake. "License Server Communication problem: E_AUTH_BAD_DEVICE_KEY_OR_PKCS12 ' I really need this resolved as soon as POSSIBLE that my comments have a date limit.
For this problem, you must Deauthorize and reauthorize the ADAM.
Follow the steps below: (note you must know your current permission user id and password)
Windows:
Click Start > run.
Open, type regedit in the text box and press ENTER. The Registry Editor opens.
In the left pane of the registry editor, find the following registry key:
HKEY_CURRENT_USER\Software\Adobe\Adept
Right click on the key to the follower, and then choose Remove.
In the dialog box confirm the key deletion, click OK.
Your permission is removed.
ADE will be cancelled now.
Now allow ADE new.
-
Original title: No Audio device
So I just formatted my computer from ubuntu and Windows xp installed. And now I have no sound. It says "No. Audio Device. My integrated sound card is broken and so I 'card his Creative Labs SB0220. I search for hours but couln can't find any solution.
Hi Sannukas0016,
Follow the suggestions below for a possible solution:
Method 1: Run the fix it from the link below and check if this can help:
Diagnose and automatically repair audio playback problems
http://support.Microsoft.com/mats/NO_SOUND/en-us
Method 2: You can also try the steps from the link below:
There is no Audio playback after you install the Sound Blaster Live! Sound card
http://support.Microsoft.com/kb/313022
Hope this information helps.
-
I just downloaded windows 7 on my computer and now it says I do not have a card installed, network driver what should I do?
If the computer is running XP or Vista, for example, before installing W7, it may mean that the manufacturer of the PC card or network did not have a driver for W7.
Go to the site of the original manufacture of the PC (brand/model) support and see if they make an adapter for your specific model of W7. If they do download it, to get the right version IE 32 or 64-bit as needed. If the PC manufacturer doesn't provide one, try the website of the company that makes the actual adapter and see if they do.
If you are unable to connect to the internet on this PC, you will need to download the driver on another PC and transfer it through via a USB stick or an SD card.
Is there no driver W7 made for your specific PC and its adapter, then you may need to consider buying a replacement network card and use it.
-
I accidentally deleted the soundmax microsoft my compiuter (Control Panel) and now I have no sound on my computer. How can I instal what agine.or how can I get my rear agine sound
Unless microsoft recently bought "soundmax", then you need to download the
drivers/software website soundmax.com... In addition, update the windows of reason or
Windows update catalog does'nt have the drivers/software because soundmax
does not digitally sign the software. In other words, that he's not microsoft WQL, thus making
It is under the control of quality of microsoft...
-
I had to reset my computer and now I have to reload everything on my computer. I tried to download it but I can't. How do I get Acrobat Pro XI back on my computer?
Download & install instructions https://forums.adobe.com/thread/2003339 can help
-includes a link to access a page to download the Adobe programs if you do not have a disk or drive
Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq
-
I just upgraded the new 6.01 FF and I don't like the way it is prepared and want to return to the previous version. How I do that without completely uninstall FF completely? Help... Please tell me how > thank you
Well, it's not as if you're upgrading! You don't downgrade your browser.
But don't worry, the decommissioning process, it's like the upgrade. For example, you can install an older version without uninstalling Firefox!
Don't forget to hit "resolved."
IMPORTANT NOTE: Remember that previous versions may have security problems. The latest security updates, you MUST upgrade to the latest version. That's what I would recommend. Thank you!
-
I just removed a virus on my computer and now I am unable to connect to cable networks.
I just removed some pirate virus from my computer and now I can't connect to my wired network (comcast) longer. I click on repair the connection and the error "failed to query TCP/IP settings on this connection. System will not draw an address. Any help?
original title: I can't connect to my wired network (comcast) longer.Hi crsa2,Reset TCP/IP to its original state by using the NetShell (netsh) utility and check if it helps fix the problem.For more information, see: -
HP support forum updated my audio the restarted the pc and now I have no sound in my pc?
support hp updated my pc (audio) and then restarted the pc and now I have no audio?
Hello
It is very good that the problem is solved for you.
Let us know how it goes!
* Although I am an employee of HP, I speak for myself and not for HP.
Click the White Star Kudos to say thank you *.
Please check accept as Solution if it solves your problem *.
Concerning
Maton
-
I like to use firefox, but I can't install so I want using all
I have a problem there is and now I have installed the new firefox to use for my web on ap standa
Maybe you are looking for
-
camera switch with 12 pin hirose
Hello I have DMK theimagingsource 23UV024 (link to cam). There are 12 hirose for trigger connector. I entered TTL under my my data DG2020A generator trigger pulse. I'm confused which 2 pins are supposed to be used for relaxation.
-
Upgrade to Vista - no sound - Intel 82801db
Just upgraded my laptop to Vista Home Premium Gateway 7320GZ. Everything seems to work fine except no sound. Gateway supports NOT this laptop to Vista. When XP had installed, I'd swear there was audio Conexant. I saw the other posts with similar q
-
WCS: Is the name of the controller of tertiary sector mandatory?
Hello I have improved my WCS to 4.2. After that, whenever I want to configure an access point I get an error message "" name of the controller of tertiary: this attribute is MANDATORY. "." Please specify ". How can I disable the which? Thank you
-
Change network adapter settings window is empty
Running Win 7 32 bit. In Device Manager, I see my ethernet card NETWORK card - he says that it works correctly, and I can't do it to the network without a problem. But if I go to "network and sharing Center" and open the "Change map settings" window
-
An application in Chinese (?) keep shutting down my computer.
Hello world I'm a little concerned about something odd that began several weeks ago. When I try to reboot or a stop, my computer, the application / process appear briefly before disappearing (a soft no-name then prevents the judgment) (I have to be s