I have Sony Viao SVE1513ACN

Similar Questions

• I have a 1998 Sony Viao space I can't connect to my DSL.

  I am working on a Dell computer, but I have a 1998 Sony Viao has a ton more memory space and is much faster.  I installed Windows XP and bought and installed a Belkin USB 2.0 Ethernet adapter.  Still not connect to my DSL.  Been through the menu thte internet tools, have tried all different connections.  Nothing seems to work, it does not connect to my DSL.  Any advice on what to do next?

  Hello

  1. Did you the latest changes on the computer?
  2. What happens when you try to connect using Internet explorer?
  3. You have security software installed on the computer?

  Method 1

  Check out the articles below and try the steps mentioned, check if it helps.

  You receive a message "Limited or no connectivity" on a computer that is connected to the Internet by a DSL modem or a modem cable after installing Windows XP Service Pack 2

  http://support.Microsoft.com/kb/892896

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

  Method 2

  If the previous step fails, see if the problem persists in safe mode with network mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 3

  If the problem does not persist in safe mode with network then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• I loaded windows 8 and have a dvd matshita bd - mlt uj23oas in a sony viao and it player will not work what I do

  I loaded windows 8 and have a dvd matshita bd - mlt uj23oas in a sony viao and it player will not work what I do

  Hello

  Check this location of registry for Upper and Lower filters...

  They will appear on the right after clicking on the location of Reg...

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4d36e965-e325-11ce-bfc1-08002be10318}

  Remove all entries found perhaps restore your disk, but can also cause something to stop working...

  Maybe you can identify the program causing the problem with the name of the filter and update...

  An example of this is iTunes... It uses a "GEAR" driver that can cause problems...

  Install the most recent usually solves the problem...

• How do I reinstall my windows XP on my Sony Viao computer original.

  I have a Sony Viao desktop computer.  It crashed a couple of years, so I had a friend rebuild.  It works under Windows XP.  However, since it has rebuilt it or what they call, I get the warning message that I have a license invalid window.  So I have not been able to have Windows installed on my computer updates now at least 2 years.  I do not have the certificate original hologram of authenticity from Sony, but it says: Microsoft Works 7.0, Microsoft Money 2004, Agie of Empires 2.0 and Microsoft Encarta online.  Is this really my appropriate Windows certificate?  I can't get the updates of windows. I am at a loss to know what to do.  Help, please.  If I'm missing any information that might help you to help me, please let me know.  How to put on my Windows XP Home?   My recovery thing is missing, too. Thank you very much.  Penny.

  Try typing F8, all as the leaves Sony logo and before Windows starts to load and watch and see if you see any kind of system recovery options. Most OEM PC (Dell, HP, IBM, Sony, etc.) come with a hidden restore partition. If you can find look for an option to restore the computer to factory default specifications. Good luck!!

• I have Sony Dsc - hx1 and not good mountain photos so I want the best setting for photography

  I have Sony Dsc - hx1 and photos in wrong mountain in which side of the photo is great and the other does not appear with better view

  so I want the best setting for photography

  http://www.Sony-MEA.com/support/product/DSC-HX1

• I HAVE SONY HANDYCAM DCR HC 23 I COULDN'T CONNECT IT TO MY PC WITH WINDOW OPSTSTM 2000.

  I have sony handycam DCR HC 23, I couldn't get it to connect to my system, my system is recently formetted

  I would like to have readers for the above-mentioned handy cam, please suggest locations for discs to load down

  the information and files you want are on the page/site support

  eSupport. Sony.com

  : jz

• I want to improve my laptop Sony Viao from Windows Vista to Windows 7. Is this possible? What are my options?

  I want to improve my laptop Sony Viao from Windows vista to Windows 7. Is this possible? What are my options?

  You must run the windows Upgrade Advisor 7, but the machines compatible vista are also compatible Windows 7.  Your options are http://windows.microsoft.com/en-us/windows7/products/upgrade

• I have sony xperia J

  I have sony xperia J.

  I turn off the sleep mode but I can't find the setting.

  Concerning

  Hachi

  Sony laptop has a distinct community, which you can access here.

• I have Sony tablet and also have a Sony laptop. My laptop connect well but my tablet can not connect?

  Let me know how can I connect my tablet to my router, I have already download the latest version of android, but still problems with my Tablet wi - fi

  Hello BrendaLiza,

  Welcome to the community of Sony.

  Try using the procedure described at the following link:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/35139/c/65%2C66/kW/35139

  If the problem persists, contact your Sony phone team.

  http://tablet.sel.Sony.com/1/1/SGPT111USS/ContactSupport

• Sony Viao will not start

  Viao boot repair is what I need, but it says to contact the manufacturer. Everything worked before going to bed last night.  I have not added the "new features" or programs

  Hi Smdaly1,

  ·         What is the exact error message or error code?

  ·         What operating system is installed on your computer?

  Follow the steps below:

  Method 1: Do the Startup Repair to fix the problem.

  See these articles for more information on the Startup Repair:

  Startup Repair

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

   

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

   

  Method 2: Use the Bootrec.exe tool in the Windows recovery environment (Windows re) to troubleshoot and repair startup issues in Windows

  For instructions, see the following article:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

   

  Let us know if it helps.

• How to re-install Windows 7 preinstalled on Sony Viao laptop?

  I ' v purachased computer laptop sony vaio with windows7 genuine. If I want to reinstall windows, how can I do? How can I write on a dvd installation files?

  Create the Sony VAIO system recovery media

  The following method to create your Sony VAIO recovery disks. When finished, store these disks in a safe place:

  • Go to start > all programs > VAIO Care. Select the recovery and restoration , thenresumed . Then click on create recovery media.
  • Follow the on-screen instructions to create your media.

  Use the recovery discs to restore your Sony VAIO to factory default

  If your computer becomes unstable, you need to use drives that you created in the step above to erase and format your computer. To perform a complete recovery do the following:

  • If you are using an external drive, power on one menu options press F11 to get into the trunk. From there, select the USB drive.
  • Otherwise, just insert the first diskette in recovery and restart the computer. The recovery process begins when the system restarts.

  Use the recovery Partition to restore your Sony VAIO to factory default

  While you should have a set of recovery disc for your computer from Sony, you can actually use this recovery partition to restore your computer to the factory State.

  • Turn on the computer and press F10 repeatedly.
  • Choose Start the Recovery Wizard
  • Follow the prompts on the screen.

  The restore process should take less than an hour to complete. When you are finished, the computer will restart and you will be presented with a Sony VAIO, which has been restored to the factory settings. Don't forget to immediately, run Windows Update, install an anti-virus (unless there is already installed) and then reinstall your programs and data backup. Your Sony computer should now run faster and more reliable.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• I have sony camera "cyber-shot". But since last 3-4 months when I connect it with my desktop PC, it has not displayed on the screen. Why?

  I have a small handy device the company Sony. The name of the template is - Cybershot. It is 10.1 megapixel with screen 7 cm square. When I connect it to my PC of countertop, it is not displayed on the PC screen. I have already installed the software, I received with the device of the company. For a few months, he was allowed and eventually I had my PC formatted by a technician and then, he stopped the display. I asked the technician if he ruined the camera software, he said no, he has not touched the camera software. I bought the new USB wire to fix the problem. But it is still not resolved. Can someone give me the reason why the camera is not displayed on the screen of the PC?

  Hello Manu,

  1. have you checked if the camera software is present on the PC?
  2. are you able to connect other USB devices to the PC?
  3 have you tried to connect to other USB ports?

  Open the list of programs by clicking the Start button, click Control Panel, clicking programs, and then clicking programs and features.

  You can try the following methods

  Method 1: As the PC was formatted, the software of the camera could have been uninstalled.  If you cannot find the software of the camera, I suggest you to install.
  http://eSupport.Sony.com/us/p/select-System.pl?PRODTYPE=7

   

  Method 2: If this does not help, connect your camera in a different USB port and check the status.

  Install a USB device
  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  
  What to do when a device is not installed correctly
  http://Windows.Microsoft.com/en-in/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  Method 3: follow also, troubleshooting of this article:
  Troubleshoot camera connection

  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

   

   

  Follow the steps and let us know if this helps.  If the problem persists, answer and we will be happy to help you.

• I have sony memory camera that I inserted my laptop, but it didn't work

  I have the sony camera memory, I inserted my laptop but it did not work then, what is the problem

  Based on the lack of information you provided, hard to say.

  HOW TO ASK A QUESTION:
  http://support.Microsoft.com/kb/555375

• I have sony kdl 46hx750

  I have internet on the tv connected when I try to watch internet app there giving me network error I need help?

  it keep the wifi for a did and lose?

• white screen after update; Unable to get the computer to open even in SafeMode (Sony Viao Vista)

  After you start this morning, had a message saying necessary to revive the updates to take effect.  Rebooted and got blank screen for a long time.  Did a hard STOP.  Have tried rebooting but it just cans.  Have you tried to reboot (drums on the introduction of Microsoft screen), normally in safe mode (with and without networking) - cans after loading files Windows with "Please wait...". ».  Help!

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner