I have win7 64 bit running FF 29.01. When I help > about it checks the updates, find one and said then click to install. I click and nothing happens. How to fix?
Win 7 64 bit with all latest updates. Running FF 29.01
If you have problems with the update, you can download the full installer of http://www.mozilla.org and run it.
Tags: Firefox
Similar Questions
-
I have an iPad2 version 9.2.1 from the music application only the apple logo appears and nothing happens...
I did a reboot, nothing has changed.
so the music app is an application by default/standard, it cannot be removed or reloaded.
-
Whenever I have shut down my computer it detects 2 updates. I checked the updates of Windows and it seems to be the same ones every day. And they did so why they keep needing to be updated? They are: a security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864) and: Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2539631)
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
UTC/GMT is 16:02 Friday, September 23, 2011
-
I have Win7 64 bit ultimate and from time to time when I start PC my card reader drives do not appear in my computer. Device Manager indicates that they are working correctly. Sometimes my dvd drives disappear. I have to do a system restore to solve this problem. For some reason any Win7 has problems with storage devices. How to stop these dissappearing from my Computer(or not getting a drive letter assigned) storage devices? It's very frustrating. And, System Restore is not a way to solve this problem, it's just a quick fix. I have three internal hard disks, three hard drives, card reader external drives, USB keys, disks, etc. I need a way to solve this problem when it happens. So far, happened about 9 times in the last six weeks since I installed Win7 64 bit ATU.
There may be an update of the motherboard BIOS to solve the problem.
Otherwise, as your card readers are no doubt attached via USB the usual way to solve this problem would be to uninstall the drives and the USB controllers and devices in the system restore.
-
Windows Vista SP2 from worm 6.0.6002 Build 6002. KB2675157 Explorer 9.0.8112. Runing Norton 360 6.2.1.5 (I disabled the two virus checking a firewall). My problem is that I ran Windows Update and go on a popup message: Windows Update cannot currently check the updates, because the service is not running. I ran last update of Windows in April and he was properly executed. I run FixIt 50202 and checked that wuauserv, misiserver, bits, cryptsvc, and workstation are started. I am able to run updates on all the software outside of windows. I ran recently updated for Radeon Catalyst Control Center, Safari, Chrome, and various Adobe products. I don't have another PC with Vista I can compare the registry entries.
Hello
Method 1: The problem with Microsoft Windows Update is not working: http://support.microsoft.com/mats/windows_update/
Method 2: Try to reset the Windows update components and check to see if the same problem happens: http://support.microsoft.com/kb/971058
Method 3 :
Try to set up your computer in a clean boot state, and then check to see if the same problem occurs.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Hope this information is useful.
-
Whenever I have click search for updates in Windows Update and it just gives me the error message: Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer. Can someone help me please? I'm using Windows Vista Basic
Hello
see if that helps to fix:
How to reset the Windows Update components?
There is also an automatic 'fix - it' here
http://support.Microsoft.com/kb/971058
Also, try to put the KB numbers in the search on the link below and then manually download the
http://www.Microsoft.com/downloads/en/default.aspx
or please repost your question in the correct windows update forum
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
Adobe booth 7.1 on Win7 32 bit, 4 GB of ram - when creating a pdf file, that he was very quickly now that is very, very slowly, at 53 seconds of 8 pages. We scan many documents and this slows us down. I tried another directory, clean the current directory, remove other programs that have been added and stopped scanning of Kaspersky. Any help would be greatly appreciated
Assuming that you are talking about Adobe Acrobat 7 Standard, it is far from being compatible with Windows 7, if problems are to be expected.
The first version which has been is 9.2, if I remember correctly.
-
I have CS5. Cannot install updates. The update process runs, but once finished, I get an error message that the update could not be installed. I have a Dell PC with 8 GB ram and 2 TB of storage.
The latetest (cloud) update sometimes does not work with old programs... Try to install your updates manually
Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/
-
I have a new computer running windows but 10, 13 photoshop elements disc. Insert the disc does not start something going and looking at the files I do not see an installation executable. I don't know what to do.
Download from Download Photoshop Elements | 14, 13, 12, 11, 10
Install and enter your serial number.
-
I bought CS5 on a CD for a long time for my windows 7 PC and I now want to put on my new iMac Yosemite that does not have a CD player running. Can I download it from adobe or from the app store and use my original serial number?
You can use it only on a Win computer. If you had CS6, you could do a platform Exchange but not with CS5. Here are the details of the exchanges of the platform:
Exchange a product for a different version of the language or platform
-
Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.
I am currently using windows 32 bit vist
I rebooted, I changed the settings, I don't have a file called window update service in the service section to stop and start, I tried the fix programs, I'm out of ideas and I need help!
Suggestions?
Hello
1. have you made changes on the computer before this problem?
2. which antivirus app do you use?
I suggest you try these methods and check.
Method 1:
Anti-virus software may conflict with Windows Update. You can temporary disable them and check the issue.
Disable the antivirus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Method 2:
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registryMethod 3: If the methods above do not help, I suggest you delete the edb.log file and check if that helps.
Follow these steps:
a. click the Start button, click computer.
b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log
Where 'C' is the drive of operating system
c. delete the log file, and then restart the computer and check the issue. -
Vista SP 2 x 86 32 bit
Compac Presario SR2180 NX
disk defragmented
the disk check run without error
Registry verified
Norton Internet Security 2011
Norton Utilities 14
1 single antivirus running
A previous audit of update 27/09/11. I downloaded and installed manually updates failed. I followed all the links from Microsoft and others. I can't always check the updates. The update is running for hours and then said: he can't check the updates. My pc can't sleep or turn off automatically. I tried the fixes recommended running but can not install them. The program runs for hours. I can only stop it by using the power button to turn it off. Everything seems to work fine otherwise. I use Norton Internet Security 2011. There are no viruses or other problems, he can find. I ran the disk check, no errors have been detected. I spent hours trying to solve this problem. Every step seems to take me one step closer to an answer, but not enough to solve the problem. Any ideas? The updates have been downloaded and has not installed were all related to the .NET Framework 4.0. NET 4.0 has been installed on my PC in 2009.
Hello
Tried all of these options with no improvement. Stumbled upon an answer that described enter deeply into the Windows registry. (I do not remember where it was.) I had checked before, some of these files, but not these. Some of the updated files were missing. I backed up everything and put the recovery disk in. Success at last! My PC and I are both happy now. I'll bring back had more than 100 updates that should be downloaded and installed. I didn't know if I'd do them all at once, so I started with some of the older ones, but they have not all install. Then checked to install them all. Updates made in the order of most importance and in the right order needed. I had to do some updates more than he has found since then. I am really satisfied with the result. I'm going to put programs and files back on my PC for some time, but I'm not tearing my hair. Maybe this will help someone else. Thanks for the suggestions, all help to improve my knowledge about computers. -
original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.
I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
Then I used my disc XP Home (SP2) update. I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update". I, then, just kept hitting the page update and restart, until I find the SP3. Then, I took a break, until the next day.
I have an ADSL broadband, with a Linksys EtherFast PCI card.
Then I got SP3, which installed without any problems.
So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night. I think that I ticked the box "don't ask me about this update".
Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"]. What showed was 1 update - 955759 KB.
After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U". There is no updated list. Then I checked through my history of update (twice), and KB955759 had not been installed.
My update setting is to let windows download ('important') updates, but let me choose when to install them.
What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.
Comment 2: If you will not contact the MS Support on this issue?
~~~~~~~~~~~~~~~~~~~~~~~~~~
Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]). Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...
Repost...
1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?
2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)? .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed? .. .and if so, you manage to install it?
3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer? .. .and if so, you manage to install it?
... I guess that clearing the browser cache does not erase 'downloaded' updates.
Nope. If you want to clear the queue of the update...
OPTION A:
1. stop the automatic updates service:
Start > run > (type or copy/paste) services.msc > click OK
Double-click automatic updates > click stop
(Stopping the service will take a moment)2 remove the contents of the download folder:
Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
Open the download folder and delete its content
Close the window.3. start the automatic updates service:
Start > run > (type or copy/paste) services.msc > click OK
Double-click automatic updates > click Start
(Starting the service will take a moment)OPTION B:
1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]
2. make disappear/close the Troubleshooter automatically pop up.
3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]
4 reboot.
Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]
Check the located log file...
C:\Windows\Debug\ MRT. NEWSPAPER <>
Related...
... This leaves us with the malicious software removal tool don't appear not.
I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]
It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!
================================================================
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list. -
Original title: Impossible to update Windows 7 on Netbook
I have a Samsung Netbook running Windows 7, but can not run Windows Update
Each ime that I try to run the update, I get the following message.
Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.
Hello
Follow the steps from the links below and check if the problem persists.Method 1: Run the Troubleshooting Utility from the link below and check if it helps.Problems with installing updatesMethod 2: Run the FIXIT in the below mentioned link and check if it helps.How to get the latest version of the Windows Update Agent to help manage updates on a computer?Hope this information helps. -
I have downloaded the Foxit and tried and still nothing happens. I associated the program also and nothing happens with save, open, or save as. I deleted Adobe Reader and have only Foxit - still nothing happens.
What browser do you use?
Does it occur only for attachments Hotmail?
You are able to download files from other sites?If you are using Internet Explorer, try to run without Add-ons and check if the problem persists or not.
To do this, click Start, type Internet Explorer in the start search box and then open Internet Explorer (No Add-ons).If the problem disappears, an add-on is causing the problem, check your add-ons and especially disable all those who may be linked to the reading of PDF.
If the problem persists, try to create a new user account and the test again under this new user account.
If the problem disappears, see: http://windows.microsoft.com/en-US/windows7/fix-a-corrupted-user-profile
Maybe you are looking for
-
Firefox 25.0 disabled kaspersky virtual keyboard and money safe ect how do I change back to the previous version as fire fox tells you towards the end of the update to the back Beach
-
Interaction of applications with Windows 7
Good evening everyone, OK? I have sort of a silly question to ask you guys. What is the name of the application that is running on the Thinkpad T420, example: increases the volume and appears onscreen in "BOLD" showing how this volume, these things.
-
Hey the guy, if I download a new Image to the WLC and doe NOT restarts the controller, what is New - but not active - available for AP Image Predownload Version? It is now - before restarting - the active Image? Sorry, I have no material here to test
-
WINDOWS 7 - My Pictures slideshow button is missing
original title: WINDOWS 7 - MY PHOTO - SLIDESHOW BUTTON MISSING - HOW TO RECOVER I'VE ALWAYS HAD THIS OPTION & ONE DAY, IT WAS GONE. WAS - CE AN UPDATE OF WINDOWS OR AN OPERATOR ERROR? SEE WINDOWS HELP VIDEO - (SEE YOUR PICTURES AS A SLIDE SHOW)
-
Red and yellow stripes on my video after export to Adobe first CC
Hello gentlemen of Adobe!I searched all over the internet, but I did not find my answer.I downloaded the latest update for Adobe premiere cc (2015) on my Macbook Pro retina 15 "(2013, 2.3 GHz Intel Core i7, 16 GB DDR3, GeForce GT 750 M 2048 MB) and I