I installed a new disk drive in a dc 5750 and now I can not start up,

Similar Questions

• Installation of Vista on the new hard drive was interrupted, and now I can not start the computer

  So I decided that I need a bigger hard drive. I got a 500 GB hard drive, so I have it PLOPPED in my Acer Aspire 5517 with my vista boot drive, turned on and began to go through the process. Once he got to the phase 'installation complete' it seems to take a while, so I let it run all night. Once I got up, it was on a black screen with the mouse, I let stand a few more minutes but still nothing. I turned off and started it expects to find to return at the beginning of the installation, but instead he began to start from what is on the hard drive at this time. It got to the screen with the loading bar and the sign 'Microsoft Corporation'. The loading bar was very frigidity and stopped and started randomly. I let it do this while I went to school, but when I got home, it was always the same loading screen. I rebooted and tried to start in safe mode, but when I do it it stops at crcdisk.sys, and never forwarded charges. I tried to do the reset thing factory start it but that doesn't seem to work. My other puny hard drive still works, but the other does not. I searched the internet but have not seen any other problem like it. I want to just start completely clean of my new 500 GB. Please help!

  Hi James,

  1. What is the number of brand and model of the hard disk of 500 GB?

  2. How did the 500 GB hard drive connected to the computer? It is external or internal?

  To troubleshoot the unable to start the issue to cause corrupted driver, some files that can not be loaded during the startup process must be fixed or restored. So, let's check the disk by using the Windows Recovery Console.

  (a) put the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD ".

  (c) select a language, a time, a currency and a keyboard or another input method, and then click Next.

  (d) click on repair your computer.

  (e) (click on the operating system you want to repair), and then click Next.

  (f) in the System Recovery Options dialog box, click command prompt. Type chkdsk c:/f to try to correct the errors.

  (g) Note: answer them when chkdsk asks you if you want to check the disk next boot Vista

  (h) after the recording of the disc, and then run sfc/scannow to check the corruption of system files.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Check out TechNet help links and check if that helps:

  The computer starts stops at crcdisk.sys

  Help! Vista won't start... (crcdisk.sys)

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Windows updates installed and now I can not start vista normally

  Hello, I have a problem starting my OS after windows updates to install. I have a laptop Dell Studio 1737 running Windows Vista SP1 x 64

  I installed the windows updates and they are normally installed on the closed part (steps 1 and 2 of 3) but the computer restarted once he ran Microsoft Corporation with the Green loading bar animation. He hung there for quite a long time as usual but I thought it had to do with updates. so after that the animation, the screen off, turned back on and it was completely black. a mouse jumped out for about 10 seconds, then disappeared. I noticed that the hard drive light stopped flashing and there is no other activity after that. CTRL-Alt-Del does nothing. So I had to hold the power button and restart. This time I used Safe Mode to let it boot. He traveled the drivers being loaded and hung up "pilot charge: \SystemRoot\system32\drivers\crcdisk.sys ', but eventually started. After starting, it linked the part "Configuring updates step 3 of 3" 0% to 100% and then just stood there and the mouse began to blink. Yet once, there was very little hard drive being indicated by light activity. After 5 minutes, it was clear, he was not any progress made by letting it continue. Yet once, forced another shut down.

  I repeated the process with the same results from the point to let start normally to force stop and meet at configuring updates step 3 of 3 to 100% but frozen in safe mode. I was perplexed what to do because I could not access the computer at all even in SafeMode! I forced the closing down and grown up recovery tools and tried to startup repair. has nothing. I tried the system restore. It is interesting that told me I had NO restore points and yet I had just installed one small not updated but there is 30 minutes. Also, I can't imagine there is no restore point after having owned this laptop for almost 4 years. I took to my faithful Tablet for some Google-ing in depth on this particular issue in the hope of finding a solution. Well, I came across an article that leaves me at least cancel the thing trying to get up-to-date and freezing. It required that use you recovery command prompt and delete the C:\Windows\winsxs\pending,xml file. After the reboot (in safe mode) Finally I could connect and access my files save them! Finally! only it isn't the end of the problem. I still cannot start normally. to do this, the above-mentioned actions of when I try to boot normally.
  I tried so much google - lies about different things, it might be and who either do not resolve problem or steps they indicate to tell me to change a registry entry to something which in my machine is already what they say before it takes. Also, I can't uninstall updates because the windows update program does not open in safe mode. I have run chkdsk and nothing. I stopped everything to boot at startup, with the exception of microsoft. I uninstalled any program that can run at startup. I ran an anti-virus (Avast & Norton separately) and lift you own. I have a ntbtlog.txt I can post if necessary. honestly, I don't know where to turn at this point, except for here. If no luck here ill get my backup files, take my computer to a local store and have them diagnose or if worse comes to the worst case, a clean format and reinstall that is not presented.
  Thank you for any advise on this issue, as I don't know what to do next.

  What I did I tried to disable the network, modem and audio drivers. It took time, but start normally thereafter, but he made a strange (and continuous) boot process he never has ever done before. Once in normal mode, I started to allow the drivers one by one and it turned out to be one for the audio driver to date. During this audio driver was activated it will disable all entries as the trackpad, keyboard, USB and particularly hard drive! so it would freeze almost instantly after activation there and closes one forced would be necessary. Device Manager Microsoft told me this audio driver was updated, but it wasn't. The company that provided the audio drivers had changed the names through the merger or buyout, or something and the new audio drivers were under the new name. A very strange situation.

  I had to search around and eventually find the latest drivers for my system setup and audio on dell's website, and it said it was a "Recommended" update This update of the driver should be mandatory if you want to continue using your computer! It is one of the most used audio dell service providers! Why he would only recommend?
  In any case, thank you Jeremy for your time and help!

• I made a disk defrag on the guest computer and now VM won't start

  Hi, I stupidly done a disk defrag on the guest computer and now VM won't start. I have attached the log files you. Please help me.

  Post edited by: a.p. - the moderator Note: branched out in a new discussion

  This can make things more difficult depending on the current state of the virtual machine.

  What you should do at this point - unless already done--is to backup/copy of files of all VM to ensure that you have a way to go back if things don't work as expected. The next step is to find out if it is possible to free up space on the D: drive, so that the virtual machine does not have to be moved (move the files could be unnecessary snapshots). If there is enough free space on the disk, use the file attached configuration (.vmx) to replace the damaged one. Ensure that VMware Workstation or at least tab of the virtual machine is closed when you do this to ensure that the replaced .vmx file is reread. If things work with the replaced files, consider deleting snapshots that you no longer need. This will not release disk space only, but can also improve the performance of the virtual machine.

  André

• has taken a hard drive from a HP pavillion laptop and I put it on a Toshiba laptop and now I can not activate

  I took a hard drive from a HP pavillion laptop and I put it on a Toshiba laptop and now I can not activate it and its telling me that windows is not genuine but also telling me that my product key is incorrect. I maybe need to all system files and things for a Toshiba.How can solve this problem?

  Hello Eduardo Montoya when you traded player having Windows installed on it? If so you will not be able to activate the operating system is an OEM manufacturer and will only work with the original system. If it is a retail facility, you will need to use the phone activation steps listed in the link below. Let me know if it helps. Thank you.

  Windows XP

  http://support.Microsoft.com/kb/307890

  Windows Vista

  http://support.Microsoft.com/kb/940315

  Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer

• I've just updated to the latest version and now I can not manually type in the URL. I can't get to a new page if I click on a link.

  I've just updated to the latest version of Firefox 32.0.3 today and now I can not manually type in the URL. I can't get to a new page if I click on a link. I had to use - gasp - Chrome just to get to this help page!

  I tried to restart Firefox.
  I can type (not a keyboard problem), but the browser never tries to go to URL, when I hit enter

  Any ideas?

  Thanks - kept looking around and found a rec to make a reset of Firefox. This seems to have worked.

• I installed JZip and now I can not put my homepage of everything except the jzip search page. How to disable the functionality of jzip?

  I installed JZip and now I can not put my homepage of everything except the jzip search page. How to disable the functionality of jzip?

  See:

  • http://KB.mozillazine.org/about:config

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

• updated my driver for my Ethernet controller and now it does not work

  Original title:

  Network network network Ethernet device

  I updated my driver for my Ethernet controller and now it does not work... I can't put it up, are the only choices that I
  to establish a wireless connection or set up a broadband connection using a user name and password but my ISP does not require
  a kind it will not accomplish the connection in place, I use win 7 64, how do I fix this so I can use my connection ethernet again?

  Hello

  You can try the following steps and check if it works:

  Method 1:

  You can restore to an earlier device driver if you are having problems with your computer or device after upgrading the driver.

  Restore a driver with its previous version

  http://Windows.Microsoft.com/en-us/Windows7/restore-a-driver-to-its-previous-version

  Method 2:

  If the steps above fail then you can perform a System Restore to an earlier point when it was working fine.

  It will be useful.

• I lost my product key of Windows XP. I had to wipe my hard drive due to the virus, and now I can't activate Windows because I lost the key.

  I lost my product key. I had to wipe my hard drive due to the virus and I installed win xp pro back. now, I can not activate my copy. This is the disc that came with the computer. its windows xp pro sp/2 from dell. I've tried everything I know using keyfinders and research on the disk. the keyfinders and drive both will eventually go wrong. What can I do next?

  original title: lost product key

  Hello

  Contact Microsoft telephone support on this.

  http://support.Microsoft.com/contactus

  For more information visit: How to replace Microsoft or hardware, packs software service to order and replace product manuals

• I have windows XP on three partitions, in disk management, I deleted a partition and now I can't boot into the partion, I want to keep.

  I have windows XP on three partitions, especially because I tried to repair my not be able to start. It all started when disk management I deleted a partition, I thought was unnecessary. now, I can't start the partion, I want to keep. Black startup screen says something about disk management cannot find the hard disk of material, something like that. I can start in one of the other partitions, but I want to get back the deleted partition. Windows XP, AMD 64 dual. Help, please.

  Hello Seymour777,

  There is good and bad news for this.

  The good news is that there is a way to do it.

  The bad news is usually the disc at the level of the publishing industry.

  This operation is not in this forum.

  Your best option right now is to look for a data recovery specialist or watch data recovery programs that will do the job for you.

  Best regards

  Matthew_Ha

• There was a change today... And now I can not open my Ant Video Player... I can download it but I can't open the drive

  Firefox did some update today and now I can't open my Ant Video Player... I use it a ton so that it would be nice to solve this problem. Please / thank you

  Hi drk132, directly contact developers extension through their homepage support condition - they can probably give you more detailed advice and are the only ones who can fix bugs or make necessary adjustments in the addon for new versions of firefox. Thank you...

• Windows 7, re - install the new hard drive was a success, but I now get guests that it is not valid, and I need to buy Windows 7

  From January 2013, after a series of about 13 automatic updates, Windows 7 hang in the boot process.  Using the repair function of the system on the Windows 7 installation disc, I was able to select a restore point at the beginning and Windows would be operated until I chose shutdown and updates would be automatically install 13 updates and then freeze at startup.  Finally, in a workaround, I would choose standby extended instead of shutdown until the system would break down after 10 days.    After going through this loop until the end of February, I bought a new hard drive and installed Windows 7 again.  I used the product key and the OEM ID on the back of my Acer Aspire 5253 - BZ849, but keep getting prompts is not valid.  How can I get this fixed WITHOUT PAYING for WINDOWS AGAIN!

  The product key on the back label of the Acer PC is: * product key removed privacy * (initially, it has been accepted as valid.  Now I get guests that it is not and I have 22 days to activate.)  There is also a code in parentheses (X 16-96072), followed by 168-00196-149-361.

  Other data are product ID: 00359-OEM-8992687-00006

  The following Diagnostic Report:

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: genuine
  Validation code: 0

  Code of Validation caching: 0x0
  Windows product key: *-* - VFP73 - B9WVC-W84BD
  The Windows Product Key hash: X7U6R5xvKJwITn/mt/K9SSBRVrk =
  Windows product ID: 00359-OEM-9816812-49361
  Windows product ID type: 8
  Windows license type: COA SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {CBE2FBB4-8A96-44A3-B53B-A89D7AC2D5F8} (1)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130104 - 1431
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Standard 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {CBE2FBB4-8A96-44A3-B53B-A89D7AC2D5F8}1.9.0019.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-W84BD00359-OEM-9816812-493618S-1-5-21-3043357091-958766540-506442348AcerAspire 5253AcerV1.1120110425000000.000000 + 000C6203007018400FC04090409Eastern Standard Time(GMT-05:00)03ACRSYSACRPRDCT100100Microsoft Office Standard 20071228D727E4AEA970Eo9pPGB5tREOLSGNBIe + lixmnuZ0 = 1 81607-903-2756143-64835

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_SLP
  Activation ID: 5e017a8a-f3f9-4167-b1bd-ba3e236a4d8f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00196-168-149361-02-1033-7600.0000-0712013
  Installation ID: 011270290203018496573530022091757890631021023321580540
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: W84BD
  License status: initial grace period
  Time remaining: 31800 minute (s) on (22 day (s))
  Remaining Windows rearm count: 4
  Trust time: 21/03/2013-16:37:33

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: PASS
  Event timestamp: 3:16:2013 15:10
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current Hash HWID: LgAAAAEAAgABAAEAAAACAAAAAQABAAEA6GHg0Gyi3MFU + QArIHFiPUqF6j / 8 it ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC ACRSYS ACRPRDCT
  FACP ACRSYS ACRPRDCT
  HPET ACRSYS ACRPRDCT
  START ACRSYS ACRPRDCT
  MCFG ACRSYS ACRPRDCT
  SLIC ACRSYS ACRPRDCT
  SSDT AMD POWERNOW
  SSDT AMD POWERNOW

  the first time you use the COA key, you need to activate by phone

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your problem clearly to the support person.

• installed a new hard drive on the mini 910.do of dell do not have the recovery cd. installed xp pro edition, mini 910 do not behave...

  I see that you have tried to help the guy with the fried hd, I had the same problem.  My husband and I bought a new hd, it install it correctly (it is in the it Department) and the only problem is that we do not have the recovery CD provided with my mini... it has installed windows xp pro ed and the mini doesn't, I know that this mini storage offline that came with it because it doesn't have a cd rom installed.  We bought one for it when we bought the mini compatible... no problem there... do you know how I can get my hands on the oem for the dell recovery CD mini 910?  It must be available somewhere because this machine is made for storing offline... Please help if you can,

  Thank you for your time,

  I see that you have tried to help the guy with the fried hd, I had the same problem.  My husband and I bought a new hd, it install it correctly (it is in the it Department) and the only problem is that we do not have the recovery CD provided with my mini... it has installed windows xp pro ed and the mini doesn't, I know that this mini storage offline that came with it because it doesn't have a cd rom installed.  We bought one for it when we bought the mini compatible... no problem there... do you know how I can get my hands on the oem for the dell recovery CD mini 910?  It must be available somewhere because this machine is made for storing offline... Please help if you can,

  Thank you for your time,

  Hey jillsmith747

  for questions about the recovery process, you contact the manufacturer

  in your case, contact dell

  http://support.Dell.com/

  Walter, the time zone traveller

• Changed HARD drive and now I can not install windows 7

  I bought a new HARD drive and interlaced old, now I am trying to install windows 7 home Premium and I get an error: "Windows Setup cannot configure Windows to run on this hardware of computers.

  See if it works...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=23060&keyword=Intel+RAPI...

  Copy the files to a flash usb without all the folders drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, will install W7.

• I interrupted utility disk neck 3 clear and now I can't start

  Hello

  with my iMac 21.5 "2016 days 30 years playing up (beachballing each click of the mouse), I decided to start over with a new facility. However, when I deleted my hard drive I accidentally selected the erase 3-pass. I stopped very quickly the erase operation, but now I cannot start my computer and cannot use the recovery of the internet option when you press the R option to install new software to boot.

  so has my cancellation erase the neck 3, all the data on my disk unrecoverable and the unusable disk?

  spoke to apple and they say it needs a repair? It is 31 days old. I have probably need a new hard drive because of this?

  Thank you.

  Yes. The clear operation is all data unrecoverable.

  The first step must always be a backup before you start any of this important project.

  If Apple says it should be repaired then take to them and ask them to fix it please.