I need catalog Meteric for each parameter

Similar Questions

• Automing instruments LabVIEW without using specific and coding drivers for each instrument?

  Hello

  I'm new to programming in labVIEW, but I had a few questions about its use in automation and remote controlling several instruments.

  It is an ideal software for automation of various instruments remote control/test. Assuming that I have several different companies spectrum analyzers, I understand that labVIEW drivers of instruments or special VI who would control these instruments. But if I wanted that all these spectrum analyzers to say, to display on another computer using the remote control, but I wanted to use the same program for effeciency, is it possible to do so universally for all instruments using labVIEW? Or do I have to adapt this program for each instrument to instrument drivers cause?

  If labVIEW can do that, is - anyone had good success for such scenarios in other programming languages?

  Thanks in advance for your help.

  Look for the Abstraction Layer material (that you can implement with LabVIEW, even if it's a slightly advanced topic).

  The idea of having a specific Test and be able to enforce it against different Instruments, decided at run time, is the kind of situation that LabVIEW and use of HALs was designed to facilitate.

  The concept is to 'Levels of Abstraction'.  When you create a test, you can design it for an abstract Framistan, since all the Framistans are supposed to be able to measure Vorbels in the range of 0 to 100, so you just plug a generator of Vorbel to generate Vorbels in a certain sequence of Test (linear, random, quickly, slowly, pulsatile, continuous, you decide), measure your Abstract Framistan records readings and compare with the results you expect write the results in a nice report.

  Of course, Framistat of OR uses Ethernet as the means of communication, while HP uses a serial port (depending on the model, series settings can change) and uses of the Intel one. DLL to communicate with the low-level API.  So you also need to develop, for each specific instrument, an "interface" between its API and the Framistan abstract (not everyone uses Vorbels as the input unit, for example).

  So the good news is that it can be done, the bad news is that one of the best ways of handling this type of question on the programming is to use OOP (OOP).  A number of languages (LabVIEW, C++, JAVA) support OOP, but LabVIEW might have the advantage when it comes to interact with the material.

  I you are looking for Hardware Abstraction Layer?  Add LabVIEW to the search query and you should find some nice presentations by Elijah Kerry...

  Bob Schor

• Size limit for the parameter in an Oracle stored procedure

  Oracle 11g on Linux SUSE 11.

  What is the LIMIT on the size of a parameter (setting OUT or IN) routed to oracle (Oracle 11 g) procedure?

  If I create a procedure:

  create or replace procedure test_proc (myid number, mydoc CLOB, BLOB img)

  What is the maximum number of bytes that I can spend for each parameter?

  Thank you

  Hello

  scottjhn wrote:

  Oracle 11g on Linux SUSE 11.

  What is the LIMIT on the size of a parameter (setting OUT or IN) routed to oracle (Oracle 11 g) procedure?

  If I create a procedure:

  create or replace procedure test_proc (myid number, mydoc CLOB, BLOB img)

  What is the maximum number of bytes that I can spend for each parameter?

  Thank you

  Depend on the exact maximum size of CLOB and BLOB depends on settings in your database.  I don't know how small these limits can be defined, but I think it's always on a terabyte.

  There are no special restrictions on the parameters; they can be as large as the other BLOB or CLOB.

• Need of response required for each group of checkboxes before form sends

  Hello world

  I looked at several postings and none of them seem to give me exactly what I need, so now I write to help you please.

  I have a form that contains 25 ranks of issues with groups associated with boxes to answer by the beneficiaries. I need to make a requirement AMONG the boxes are marked for each question before you can submit the form.

  See my screen capture below:

  For example, in the first orange line all 3 boxes are titled ''PAIN'' with the value of exports of: 'YES', 'No.' and 'I don't know'.

  On the second line, all 3 boxes are titled, '1', to export values of: 'YES', 'No.' and 'I don't know'.

  Third row and keep just in the same way. Each line will share the same title and have the value of exports, as mentioned above.

  Is there a script that I can use so that beneficiaries are required to select 1 case in each group/rank until they will be allowed to submit their form?

  Also, if you can provide the script I want to use (if that's the solution), please let me know where you would enter this script (which is - like a mouse point of action, or a paper script, etc.). I'm still learning these steps and need instructions on them.

  If necessary, I use Adobe Acrobat 9 Pro

  Thanks in advance for anyone who can help!

  

  The script is intended to replace your current order to submit the form.

  To specify multiple recipients you can add them to the cTo parameter, delimited by semicolons, like this:

  } else this.mailDoc ({cTo:"[email protected]; "}) [email protected]; [email protected]'});

• I have copy of old tbird and seamonkey e-mail files with the files and emails for each. I need to add to new tbird install. can not find a way to do it. Help

  I have copy of old tbird and seamonkey e-mail files with the files and emails for each. I need to add to new tbird install. can not find a way to do it. HELP PLEASE. previous e-mail files are under mail then mail.earthlink* .net and each of the five mail .net is an email address I have. I can't find a way to identify each file by email to the specific email address (IE mail.my E-mail name.net) so I can copy the files and emails from the past to the email addresses now under tbird. previous installed e-mail identities may not be the current configuration of e-mail files in tbird. I think that I must be sure that mail.name.net matches the previous mail.name.net to be able to copy and paste the old to the new. is there a way to find the file name correct the old email and correspond to the new? all my emails very important information are mostly in the old mail electronic id and must be available in the identification of email again (but same) how can I do this?

  http://KB.mozillazine.org/Importing_folders

  Use this module.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

• I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not display in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not appear in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  You must save the spreadsheet containing the new date as a model format and use this custom template for each new spreadsheet where you want that this date format personalized at your disposal.

• Is it possible under the EULA to have several virtual machines on a single physical hard disk while using the same OS license or do I need a separate license for each virtual computer?

  I have several programs that are not compatible with my 64 bit Windows 7 operating system.  I would like to run each different software under another virtual machine of VMWare (5 packs of different software programs and 5 different virtual machines of Windows XP).  These would all be installed on your laptop.  I can use the same license of Windows XP for each virtual machine, or do I need a separate XP license for each (different XP in case 5 licenses)?

  It is lifted directly from my EULA:

  1. GRANT OF LICENSE.

  The manufacturer that you grant the following rights, provided that

  comply you with all terms and conditions of this EULA:

  1.1 installation and use.  You may install, use, access,

  display and run one copy of the SOFTWARE on

  THE COMPUTER.  The SOFTWARE may not be used

  by more than two 2-processor both on the

  COMPUTER, unless a greater number is

  indicated on the certificate of authenticity.
  Then...
  This means that as long as you are running two or more instances of XP at the same TIME, you agree? Or does this mean that, after you install once, you have reached your limit?
  I imagine that most people (including those who are running Microsoft!) will say that the second interpretation is correct.
  However...
  If this is the case, anyone their hard drive as a backup to clone strategy would violate the EULA!

• We need a separate servlet class to open a report of jasper for each button in report or not?

  Mr President.

  We need a separate servlet class to open a report of jasper for each button in report or not?

  My code for the servlet is as under which works very well for a single report.

  package ash.view;
  
  
  import ash.model.SchoolAppModuleImpl;
  
  
  import java.io.IOException;
  import java.io.InputStream;
  import java.io.PrintWriter;
  
  
  import java.sql.Connection;
  import java.sql.PreparedStatement;
  import java.sql.SQLException;
  
  
  import java.util.HashMap;
  import java.util.Locale;
  import java.util.Map;
  
  
  import javax.servlet.ServletConfig;
  import javax.servlet.ServletException;
  import javax.servlet.annotation.WebServlet;
  import javax.servlet.http.HttpServlet;
  import javax.servlet.http.HttpServletRequest;
  import javax.servlet.http.HttpServletResponse;
  
  
  import net.sf.jasperreports.engine.JasperCompileManager;
  import net.sf.jasperreports.engine.JasperExportManager;
  import net.sf.jasperreports.engine.JasperFillManager;
  import net.sf.jasperreports.engine.JasperPrint;
  import net.sf.jasperreports.engine.JasperReport;
  import net.sf.jasperreports.engine.design.JasperDesign;
  import net.sf.jasperreports.engine.xml.JRXmlLoader;
  
  
  import oracle.jbo.client.Configuration;
  
  
  @WebServlet(name = "ReportServlet", urlPatterns = { "/reportservlet" })
  public class ReportServlet extends HttpServlet {
      private static final String CONTENT_TYPE = "text/html; charset=UTF-8";
  
  
      public void init(ServletConfig config) throws ServletException {
          super.init(config);
      }
      
      protected Connection getConnection() {
          
          PreparedStatement st = null;
          String amDef = "ash.model.SchoolAppModule";
          String config = "SchoolAppModuleLocal";
          SchoolAppModuleImpl am = (SchoolAppModuleImpl ) Configuration.createRootApplicationModule(amDef, config);
          
          st = am.getDBTransaction().createPreparedStatement("select 1 from dual", 0);
          Connection conn = null;    
      
          try {
              conn = st.getConnection();
              return conn;
          } catch (SQLException e) {
          }   
      
          return null;
      }
  
  
      public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
          String var0 = "";
          try {
              var0 = request.getParameter("classId");
          } catch (Exception e) {
              e.printStackTrace();
          }
          response.setContentType(CONTENT_TYPE);
          Map parameters = new HashMap();
                 parameters.put("format", "pdf");
                 parameters.put("WEBDIR", getServletContext().getRealPath("/"));
                 parameters.put("REPORT_LOCALE", new Locale("ar"));
          
          
                 parameters.put("classId", new String(var0));
                 Connection conn = null;
                 InputStream is = null;
                 try
                 {
                   conn = getConnection();
                   is = getServletContext().getResourceAsStream("/WEB-INF/reports/ClassDataReport.jrxml");
          
          
                   response.setContentType("application/pdf");
                   response.addHeader("Content-Disposition", "attachment; filename=ClassDataReport.pdf");
                    
                   JasperDesign jasperDesign = JRXmlLoader.load(is);
                   JasperReport jasperReport = JasperCompileManager.compileReport(jasperDesign);
                   JasperPrint jasperPrint = JasperFillManager.fillReport(jasperReport, parameters, conn);                    
                   JasperExportManager.exportReportToPdfStream(jasperPrint, response.getOutputStream());
                            
                   conn.close();
                 }
                 catch (Exception e) {
                   e.printStackTrace();
                 } finally {
                   closeConnection(conn);
                   try {
                       if(is !=null){
                           is.close();
                       }                   
                      
                   } catch (Exception localException1)
                   {
                   }
                 }
          
          PrintWriter out = response.getWriter();
          out.println("<html>");
          out.println("<head><title>ReportServlet</title></head>");
          out.println("<body>");
          out.println("<p>The servlet has received a GET. This is the reply.</p>");
          out.println("</body></html>");
          out.close();
      }
      
      protected static void closeConnection(Connection conn) {
          try {
              if(conn !=null){
                  conn.close();
              }           
          } catch (Exception ex) {
              //  System.out.println("Developer Msg : Exception in printReport1Servlet.closeConnection()");
          }
      }
  }
  

  Concerning

  It will be something like this:

    public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
            String var0 = "";
            String reportName = "";
            try {
                reportName = request.getParameter("reportName");
            } catch (Exception e) {
                e.printStackTrace();
            }
            response.setContentType(CONTENT_TYPE);
            Map parameters = new HashMap();
                   parameters.put("format", "pdf");
                   parameters.put("WEBDIR", getServletContext().getRealPath("/"));
                   parameters.put("REPORT_LOCALE", new Locale("ar"));
  
                   if(reportName.equals("report1"))
                   {
                     var0 = request.getParameter("classId");
                     parameters.put("classId", new String(var0));
                   }
  
                   if(reportName.equals("report2"))
                   {
                     Object value1 = request.getParameter("value1");
                     Object value2= request.getParameter("value2");
                     parameters.put("p1", value1);
                     parameters.put("p2", value2);
                   }
  
                   Connection conn = null;
                   InputStream is = null;
                   try
                   {
                     conn = getConnection();
                     is = getServletContext().getResourceAsStream("/WEB-INF/reports/"+reportName+".jrxml");
  
                     response.setContentType("application/pdf");
                     response.addHeader("Content-Disposition", "attachment; filename="+reportName+".pdf");
  
                     JasperDesign jasperDesign = JRXmlLoader.load(is);
                     JasperReport jasperReport = JasperCompileManager.compileReport(jasperDesign);
                     JasperPrint jasperPrint = JasperFillManager.fillReport(jasperReport, parameters, conn);
                     JasperExportManager.exportReportToPdfStream(jasperPrint, response.getOutputStream());
  
                     conn.close();
                   }
                   catch (Exception e) {
                     e.printStackTrace();
                   } finally {
                     closeConnection(conn);
                     try {
                         if(is !=null){
                             is.close();
                         }                   
  
                     } catch (Exception localException1)
                     {
                     }
                   }
  
            PrintWriter out = response.getWriter();
            out.println("");
            out.println("");
            out.println("");
            out.println("
  The servlet has received a GET. This is the reply.
  ");
            out.println("");
            out.close();
        }
  

  And the button that will call the report should be something like this;

• What I need to buy Adobe Acrobat DC for each computer, or I can share a?

  What I need to buy Adobe Acrobat DC for each computer, or I can share a?

  Hi angeliner39640646,

  You can install acrobat DC on two systems if you have the subscription for it, but you can work only on systems, one at a time.

  Let us know if you need additional assistance.

  Concerning

  Sarojini

• Need to find the version number referring to the last name change for each emplid.

  emplID	Name age	Version
  ---	-----   ---	--------
  1	ABC	25	2
  1	ABC	26	5
  1	def	27	9
  1	def	28	15
  1	def	29	18
  2	JKL	15	5
  2	MNO	16	8
  2	MNO	17	11
  2	PQR	18	20

  Need to find the version number referring to the last name change for each emplid.

  As indicated by the version number change when there is change in age as well, but I need a query that gives the version number referring to the last name change for each emplid.

  with

  DATA_TABLE (EmplId, Name, Age, version) as

  (select 1, 'abc', 25, 2 double Union all

  Select 1, 'abc', 26, 5 Union double all the

  Select 1, 'def', 27, 9 double Union all

  Select 1, 'def', 28, 15 double Union all

  Select 1, 'def', 29, 18 double Union all

  Select 2, 'jkl', 15 5 Union double all the

  Select 2, 'mno', 16, 8 double Union all

  Select 2, 'mno', 17, 11 double Union all

  Select 2, 'pqr', 18, 20 double

  )

  Select emplid,

  Max (Name) name of Dungeon (dense_rank last order by version).

  Max (Age) age of Dungeon (dense_rank last order by version).

  version Max (version)

  from (select emplid, name, version,)

  -case where name! = lag(name,1,name) on (emplid version order partition)

  then "renamed".

  end change

  of data_table

  )

  where the change is not null

  Emplid group

  EMPLID	NAME	AGE	VERSION
  1	def	27	9
  2	PQR	18	20

  Concerning

  Etbin

• A license is required at the VASA? A license is required for each copy? VSI is necessary to have the VASA? They are mutually exclusive? VSI need NOTTM?

  A license is required at the VASA? A license is required for each copy? VSI is necessary to have the VASA? They are mutually exclusive? VSI need NOTTM?

  Thanks in advance.

  Assuming that you are referring to EMC arrays.

  License to the VASA: No.

  VSI required at the VASA: No. they work very well together, but does require that the other.

  VSI allowing VAAI: No. VAAI is active with or without the VSI.

• For all the records for each record double, I need to get a single column with null or 0.

  Hi all

  I have a requirement where I need to get all the records, for each record in double, I need to get a single column with null or 0.

  create table a1

  (

  Identification number,

  VARCHAR2 (100), the point

  part varchar2 (100));

  Insert into a1

  values (1, 'ABC', 'A1');

  Insert into a1

  values (2, 'DEF', 'A2');

  TABLE A

  PART ITEM ID

  1 ABC A1

  1 ABC A1

  1 ABC A1

  DEF 2 A2

  DEF 2 A2

  3 DEF A2

  O/P

  PART ITEM ID

  1 ABC A1

  1        ABC             0

  1        ABC             0

  DEF 2 A2

  2       DEF              0

  3       DEF              0

  Thanks in advance.

  Thanks for your help FrankKalush...

  This one will work.

  WITH got_r_num AS

  (

  SELECT NVL (a1.id, a1.id) as id

  NVL (a1.item, a1.item) AS element

  NVL (a1.part, a1.part) IN the framework

  a1.id AS a_id

  ROW_NUMBER () OVER (PARTITION BY a1.id

  ORDER BY NULL

  ) AS r_num

  BY the a1

  )

  SELECT id

  element

  CASE

  WHEN a_id IS NOT NULL

  AND r_num = 1

  THEN part

  ELSE ' 0'

  END in the framework

  OF got_r_num

  ;

• Need for each week of grouping on a date column

  Hi, I have the following query

  Select user_name 'user who accessed '.

  , count (user_name), "number of accessible times.

  of apex_workspace_access_log

  where application_id = 123

  and TRUNC (access_date) BETWEEN to_date (1 July 2013 00:00:01 "," dd-mon-yyyy hh24:mi:ss') and to_date (4 August 2013 23:59:59 ',' dd-mon-yyyy hh24:mi:ss') Group of user_name,.

  At the moment it displays the data for each day from July 1, 2013. I need to view the data in my application a week... We hear that he should consolidate the meter and the username per week.

  as from July 1 to July 7, July 8-14 July, 15 July-21 July, 22 July to 28 July, 29 July - 4 August and so on.

  Could you please let me know if we can do this via the query?

  which can be achieved by putting Manik query as a point of view online by using the function command Rank by the number of the week.

  Select user_name (user_name) count, rank() (command per week CSA) week from (SELECT user_name 'User who has consulted',

  COUNT (user_name) 'number of times accessed.

  TO_CHAR (access_Date, 'IW') week

  Of apex_workspace_access_log

  WHERE application_id = 123

  AND TRUNC (access_date) BETWEEN TO_DATE (1 July 2013 00:00:01 ',)

  "hh24:mi:ss mon-dd-yyyy")

  AND TO_DATE (4 AUGUST 2013 23:59:59 ',)

  "hh24:mi:ss mon-dd-yyyy")

  GROUP BY user_name,to_char(access_date,'IW')

  );

  PS: He completely untested, but I guess it would help you to get the numbers of the week as well.

• I have 2 blogs on my site, I need to customize the layout of Blog Post details for each diff?

  I have 2 blogs on my site, I need to customize the layout of Blog Post details for each diff?

  Hello

  Unfortunately, it is not possible to have multiple layouts of details for your blog by site, at this point.

  Kind regards

  -Sidney

• Do I need separate Adobe contribute for each user copies?

  I'm looking into using Adobe Contribute as a CMS for our intranet. Each Department has their own section, which they would like to publish and modify as needed. My guess is 'Yes', but to confirm, if anyone knows - what I have to buy copies of Adobe Contribute for each user who will be granted these permissions? If there are 6 departments - are talking us about to buy 6 copies of Contribute to be installed on their computer? Please advice... Thank you!

  Hello

  Thank you to the Adobe community.

  I wish to inform you that a contribute license can be installed on both machines max, but executed on one machine at a time.

  In your case if 6 users will work to contribute entered then you will need to buy 6 licenses of Adobe Contribute. But if only three users will work on this topic at a time then 3 licenses of contribute would be sufficient for you.

  I hope this helps!

  Shekhar