I need help to increase

Similar Questions

• AY747AA: I need help my pc has 1 short beep, 1 long beep

  Hi there I seriously need help you guys with my model # P6310Y.

  I constantly hear 1 short beep and 1 beep long when I try to start my PC. According to hp, it's a memory problem, but I proved it wrong.

  I went to remove the RAM check if one of the modules is bad.they are all good 2 GB x 3.

  I also removed the disk hard windows 7 and I still get the beeps that I described above. I made sure that all the cables are correctly seated and I cleaned the MOBO set for dust, including the CPU.

  I get a white one on my screen nothing shown.

  When I plug the keyboard I get no power, lights (NumLock, CapsLock) etc.

  The mouse is powered.

  I replaced the power supply always get the beeps and I can remove it all cables, hd, mouse, KB and the beeps continue.

  Please help me guys that I have reached a dead end and I thank you for your time,

  Sincerely,

  tech1126

  Quote from Wikipedia:

  S/PDIF (Sony/Philips Digital Interface Format) is a type of digital audio interconnection, used in audio devices to the audio output over relatively short distances.

  In any case, it's time to "responsibly recycle" this motherboard and get a new one.

  You traded all that was possible exchange, without solving the problem.

  Pull on all small riders off the coast of the old MOBO and then save them.  They might be useful.

  Try to find a MOBO from the same manufacturer with the same type of CPU (Intel processor) or AMD in AMD.

  That increases the chances of (stored on the current hard disk) Windows being able to reconfigure itself to adapt to the new hardware configuration.  This "correspondent" also helps to position all the external (USB, Ethernet) audio connectors on the new MOBO to physically enter your current case.

• I have adware on my mac and I need help to fix it!

  I have adware on my mac and I need help to fix it!

  Try Malwarebytes for Mac:

  https://www.Malwarebytes.org/Mac-download/

  Is fast, effective and safe.

  Do not be mislead by one who can say that it is an anti-malware application.  It would be a false increased.

  Ciao.

• need help with the CVI real-time

  Hello

  I'm new to CVI real-time and need help related to this. I'll explain my scenario:

  1. I have a few configuration files (INI). Need to validate the files (the range... check etc.) when the application is started.

  2. when the user clicks on 'START' in the user interface on the host machine, I need to generate outputs (analog/discrete...) according to the settings in the config file and read a few entries of other instruments. (I/O such tasks that generate outputs/inputs, I intend to perform beside reading RT)

  3. from the user interface, user can also change the configuration files. If the user modifies the files, file validation must again be made. After editing files, if the user clicks on START, the need to take the new entry to perfom tasks I/O configuration files.

  4. I am NOT using reflective memory for my application.

  I am confused in the following area:

  1 file validation during startup, I have to perform on host and on the side of RT?

  2. If the configuration files are changed in the host side user, how I send the names of files to RT? I think that I should not send the file names, I need to read from the file and its contents, I need to move on to Rt.... Pls correct me, I'm not sure about this...

  3. If I send the contents of the file to the RT, how do I do... I have to use structures, means... ???

  Please guide me. Any help would be much appreciated.

  Kind regards

  Samantha

  Hey Samantha,.

  1 file validation during startup, I have to perform on host and on the side of RT?

  It depends on the full range of responsibilities for INI files. If they are necessary simply to change what the I/O are for, then you would be technically just validate the content of the file INI on the side of the RT. However, you could post on both sides if you wanted to. However, I would probably set up as I have send a validation to the target control, have the target run a component of the code that validates the INI content based on how I loaded it and then returns a message that says if it meets the requirements I specified. However, if you are concerned with unloading of this process on the user's desktop (to the contrary increase the performance of the RT controller), you may FTP the file to the rheostat and perform the process of validation of the side host.

  2. If the configuration files are changed in the host side user, how I send the names of files to RT? I think that I should not send the file names, I need to read from the file and its contents, I need to move on to Rt.... Pls correct me, I'm not sure about this...

  You can send them to the target by FTP. This can be done programmatically, by MAX, command or a Web browser window.

  3. If I send the contents of the file to the RT, how do I do... I have to use structures, means... ???

  It is basically addressed in answer to question two. You would not need another structure in your code of RT to manage the FTP receive component as this is handled by the FTP Client/server communication. However, in case you successfully FTP a file to the target, you should probably send a message between the host and the target so that the target can react accordingly and reload the file I/O values, run an inactive procedure, or do what you want.

  I hope this helps. Have a great day!

• Need help with the function or metric derivative to calculate percentages of threshold for a measure

  Hi, first post to the community that I am a n00b Foglight needing help.

  A thing (in fact the only thing) I like Microsoft SCOM is how this graph of the availability of a metric, and I want to do the same thing in Foglight. I understand that this could be a derived measure or a function, I need, but am a bit lost right now.

  Let's say I have a metric and created thresholds as follows: normal included 0, 50 inclusive, warning critical 75 inclusive, fatal 100 inclusive + 9999 included. The metric is measured every so often and more often (99%) of the time it's normal. I want to visually represent that fact, together with the percentage of time that he spends in the strips of quick, critical and fatal alert threshold.

  For the dashboard but mainly reports I am looking for the percentage of time that the metric through each of the bands of threshold and put them in some form of chart, preferably very similar to how SCOM it: -.

  

  I would also like to increase this visually with a quantification for the oriented numercally, in order to insert values in the report for clarification would be great too, for example:-Normal:-99% 0.5% warning critical Fatal 0.1% 0.4%

  I think of what I have already learned that we have to include a 'blue' band for threshold indefinite in order to operate on a regular basis for any measure.

  I do not seem to come up with this concept in Foglight but I think it could be very useful to have something. Any help is most appreciated.

  Health and alarms is a standard display which can be used on any object topology.  You can access it from the data browser and should also be able to specify this dashboard as a preference in personalized dashboards.

  

  Here it is in a custom dashboard:

  

• I need help with a purchase of Canon EF/EF-S lens...

  Hi all...

  I don't know where else to post this question since this isn't really a photography forum but rather a forum Lr4.  But I'm still very new to DSLRs and need help.

  I currently have a Canon T3 w / 18-55 Kit lens.  I would like to take pictures of landscapes, mountains and waterfalls, etc...  At the same time I need the ability to take pictures up or about 6 "of objects.  All the different numbers on lenses are confused the heck out of me and I was wondering if there was any advice - could someone give me a good Canon lens or two that will get me where I want to be.  I want to take close-ups and shots of distant/large.  Lenses certainly are not cheap, so I want to make the right decision.

  I recently bought a book by David Busch on the T3 and its capabilities, but I still have a way to go before finishing the book.

  Can anyone offer some advice or an overview of the importance of using the right lens or even a recommendation of a Canon lens?

  Thank you!

  To see 'detail' of small objects like flowers, you have to shoot a lot closer (less than inches) for higher magnification. I have the same 18-55mm IS lens kit you have and checked the maximum possible magnification, which is with the longest value of 55mm zoom. I was able to focus down to a 1.5 "x 2.25" image size, which is about .63x magnification for full frame 35 mm 24 x 36 mm (95 "x 1.4"). Canon EF 50mm F2.5 on your T3 a one.5 x 1.6 = magnification of .8x, so you are pretty close to this already with the ability of the 18-55 mm. The main difference is that the EF 50 mm macro lens is designed to achieve a superior at close distances sharpness and produce images of superior quality of small objects like flowers. That said, that you can be very happy with the results of your 18-55mm, once you get the hang of using it for macro work.

  Regardless of the lens used the biggest difficulty with macro photography is framing, focus on your subject and keeping the camera "yet". Even slight movement will cause the focus to distances of these relatives, because of the very shallow depth of field (i.e. terms of sharpness). Here are a few things you can do that will help:

  (1) a tripod to help you compose the object in your picture.

  (2) set the mode "Av" and F stop of at least 8. You can go as high as F16 to increase depth of field. This will cause the camera to use a very slow shutter speed, which also requires the use of a tripod. In a pinch, you can use your Canon T3 up to ISO 3200 with some post processing in Lightroom noise reduction to shoot 'at hand '.  Use nag screen image from the camera to the full magnification setting to check the sharpness ' in the field '.

  (3) set your lens to manual focus (M) and use the ' Live view ' on your T3 with the x 10 magnification setting (read the manual of your T3).

  (4) focus on the Central "area of interest." You can use "Depth of field Preview button" of your T3 to get an idea of what is inside the "depth of field".

  And remember that Lightroom can do wonders on cleaning and improvement 'less than pefect' images to give them a stellar appearance! Happy shooting and LRing!

• Several uses for the final product, need help with Render & output parameters

  Aloha, this is my 1st time in this forum... posted this question in Premier Pro and has been mentioned here.

  I created an effect straight project. I want to make four 4 very specific uses.  Unfortunately, I don't know anything about these formats to be given options in AE - CS4.  One of the many 'rendering settings' and 'output module' settings 'make model '.  This seems the best option for me given my future use: 1) for the DVD; (2) for electronic mail; (3) for YouTube. (4) my web site.  I read and reread the rendering and export options in the manual of use-AE CS4 without success in understanding what each option should be used for.  I need help in the translation of pixelpicker-talk.

  Can someone help me about these accurate "rendering settings" and "output module" parameters listed in AE in the option "make and model"?

  Thanks a lot... come visit the watrer is warm and clear as always.

  KonaDon

  I understand - I think the article using After Effects is a very complete resource, explaining the various features and their purposes. But the real world is full of special cases that are very difficult to address in a manual. In addition, it is a moving target. Different best options today probably the best choice, next year.

  Let's see if we can help here:

  1-. DVD: on the technical side, it is always MPEG-2. A very specific taste of MPEG-2. But while After Effects will let you export a file of this type (choosing the MPEG - 2 DVD is predefined in the output Module), it is also true that most of the applications (such as Adobe Encore DVD) DVD authoring are very friendly in terms of letting you wear one (ideally, uncompressed) Quicktime or AVI (which in no way is compatible DVD) and do the encoding in MPEG-2 for you. So it is up to you: you can encode EI using the preset DVD MPEG-2, or you can use an application of coding specialized (such as Adobe Media Encoder in stand-alone mode) or simply let the DVD authoring application do the encoding for you. This should be very simple and in this case, you can simply render a Quicktime or AVI file without loss (there is a model of output Module called "Lossless" who will take care of everything. You can use the default value, the 'best' model to make settings in most cases).

  2-. E-mail: on the one hand, you need something that is really light and as good quality as possible. In the other, you want something universal compatibility, which can be read in all or almost all computers. H264 (advanced version of MPEG-4) format is really good in terms of efficiency, but its ' adoption is perhaps not as widespread yet. Flash Video (FLV) is really good in this regard. In this case, you could choose Adobe Flash Video (FLV) as the format in the output Module and then choose preset FLV 'Flash 8 web small' for this purpose.

  3 YouTube: it's not that simple. The ideal format for YouTube is not quite exist, they insist on the re-encoding each file that you download, even if your file is technically identical in every way to their versions. So what you want here is something that looks good and it isn't huge to download. This all spells 'H264', in my opinion. The details depend on the question of if your Composition is HD or SD, 4:3 or 16:9, etc. Strange as it may seem, the big "iPod" preset for the format H264 is a good starting point. You can customize it to increase the speed of transmission a little (maybe 2 or 2.5 Mbps, against 1.5 Mbps).

  4 website: even once, you need something that most people already have in their computers. Flash Video is an excellent choice, since about 98 percent of users have the Flash plugin. But in this case, you can have more great heights and flow rates, so you can use the "Flash 8 big' defined by default as a starting point. Once the Flash 10 plugin (which now supports the H264 in addition FLV) spreads in the future, you could standardize on H264 in a delivery format, with different settings for each type of destination.

  I hope this helps.

• Errror doubts to the Server primary and Standby - need help

  Hi all
  
  I have doubts or errors below. I need help to resolve all issues.
  I have successfully configured Dataguard. Now, the timing is up to date with the following parameters (using 11 g):
  
  primary:
  
  Log_archive_dest_1 =
  LOG_ARCHIVE_DEST_2 = 'SERVICE = Standby.123 arch'
  standby_file_management = auto
  
  to sandby:
  Log_archive_dest_1 =
  standby_file_management = auto
  
  
  
  Still, I face below messages in the alertliog. Can someone explain clearly all the points.
  
  
  Primary:
  ORA-1652: unable to extend temp by 640 segment in tablespace NEWTEMP
  
  I get this error when my destination archvie had filled later, we published the enough space, the archived generate. Again, I see this message once between the two. Need to solve this problem.
  
  
  Primary:
  Checkpoint is not complete (I see this message very often, want to get rid of this)
  
  
  standby time:
  kcrrvslf: active RFS of archiving for newspaper wire 1 sequence (sometimes I see this KCRRVSLF)
  
  
  
  standby time:
  Check that the CONTROL_FILE_RECORD_KEEP_TIME initialization parameter is set to a value large enough to keep switch of newspaper afequate information to resolve gaps archivelog. (also get this message between the alertlog standby file)
  
  
  
  Standby time:
  FAL [client]: error to get the empty sequence, no specified FAL Server (it comes very often to message. How to remove it, what needs to be added. I have to add the Sub settings)
  FAL_CLIENT
  FAL_SERVER
  
  
  Thanks in advance.
  No Ministry of health
  [email protected]

  Not Moh wrote:
  DRM

  Thanks for your reply. I am convinced by your answers. I still have a few things to clarify.

  CONTROL_FILE_RECORD_KEEP_TIME
  I checked the setting, the current value is 7 days. How much should I increase. Is 15 days okay?

  It's OK with me. But then, it's your system. As I said, playing with him until you get the desired result.
  >

  kcrrvslf: active RFS of archiving for newspaper wire 1 sequence (sometimes I see this KCRRVSLF)
  You said, the above message is instructive. What is kcrrvslf mean?

  I don't know what it represents. A search on MetaLink got zero hits. A Google search got a lot of success.

  >

  FAL [client]: error to get the empty sequence, no specified FAL Server (it comes very often to message. How to remove it, what needs to be added. I have to add the Sub settings)
  We use 11g. I never used the parameter below. Can you please highlight the importance of parameters. Is it compulsory to use the parameter?
  When I see all the archives are up to date and SYNC. Always to attack, I get the message FAL [client]: error extracting sequence gap...
  FAL_CLIENT
  FAL_SERVER

  appreciate it.

  Thank you
  No Ministry of health

• my iphone need help doesent work!

  my iphone need help doesent work! 5 minutes ago my iphone 4S felt on the ground and now it doesent start but I can still hear the sound of loading until I can do?

  PS: Sorry for my bad English, I'm from the Germany

  Try restarting it by maintaining deep-set buttons home and power together. It may take up to 20 seconds. If she does not return to life, better make an appointment at the genius bar to your Apple store.

• Need help to reinstall itunes

  Recently had to withdraw Windows 10 votes against 7, on doing so, iTunes didn't work.  I tried to remove iTunes, but get an error not found the path iTunes6464.msi. So I can't uninstall.  I tried to download the latest version, but when it comes to uninstall the old version it fails because it cannot find this file.  Need help to remove and reinstall so it can connect again my devices.

  See this user of ASC. See the section on deleting and reinstalling iTunes.  Troubleshooting problems with iTunes for Windows updates

• I NEED HELP Please im having a problem to forget my password and when I plug it it says its locked with a password he try to put the itunes thing but

  NEED HELP Please im having a problem to forget my password and when I plug it it says its locked with a password he tried to put the itunes thing but it says enter password I put in what I rember, then said lokced for five minutes help me pls

  Without knowing the password for your iPhone, there is no way to unlock it, bring even you to the Genius Bar. If you continue to enter the wrong password, you will be locked out of your iPhone, and your data will be unaccessable.

• I need help to recover my iphone

  I got my iphone 6 for more than two years know I default to set up factory reset me gives error tha my sim card is not supported, but I've been with you even with the phone sim card before I reset it please need help.the phone imei-* please help me.

  < personal information under the direction of the host >

  It sounds as if your iPhone may have been hacked for use with the carrier that you used, and now that you have updated, it is locked to the original carrier.

• Need help to install iTunes v12.4.3.1 Windows 10

  I've tried everything to make it work:

  1. I tried to disable my antivirus before installing

  2. I tried to install as administrator

  3. I have tried to uninstall all relevant applications of apple.inc, restart my pc and then install again

  4. I tried to update my Windows

  I had iTunes installed before on my Pc with Windows 10, but two days ago, I restored my pc and now I can't install it.

  Please I need help

  

  The message "an error occurred during the installation of assembly ' Microsoft.VC80.CRT, type ="win32", version ="8.0.50727.6195", publicKeyToken ="1fc8b3b9a1e18e3b", processorArchitecture is...» "may occur because a particular library file is not included in the supplied with iTunes distribution package or will not be installed because some unspecified reason. Install Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package MFC security update before you attempt to reinstall iTunes can help.

  There are three files to choose from if you need choose the one that matches the processor architecture of your system, which must be indicated in the error message.

  • Vcredist_x86. EXE - 32 bit systems
  • vcredist_IA64. EXE - Itanium processors
  • VCRedist_x64. EXE - other 64-bit systems

  When to reinstall iTunes, right-click on the Setup and run as administrator.

  See troubleshoot problems with iTunes for Windows updates for more information if necessary.

  TT2

• photos were deleted from my phone? !!! need help urgent pls

  So I'll start from the beginning.

  So at the beginning I had 5200 pictures and everything was fine, except that I couldn't take any pictures on Snapchat. So I decided to delete some pictures. Except sometimes just deleted photos would return as 2 seconds. And sometimes I would say 5 photos selected, but I couldn't see anything selected? Or I have to press SELECT again and again.

  at least one forward a few hours and I received on my phone, except that now it says I have only 3600 pictures! I lost a few photos, especially those previously on my phone, then some of the pictures I deleted months ago as last year are back. And I have pictures on my recently removed, but not the ones I lost!

  I feel that my phone is somehow back in time or something.

  And I lost a few photos of a wedding and I regret totally stayed so much (((pls est de toute façon??))

  also, I need help using http://www.ipad-converters.org/recover-photos-from-iphone/ this type also.

  Hello

  When you recharge an iPhone / iPad, it will be saved up to iCloud on wifi you

  Restore the original configuration.

  When configuring back it will ask you if you want to use iCloud backup say yes

  Use the backup of a time where you had all your photos.

  See you soon

  Brian

• After I updated my iPod wants a lock to activate I need help ASAP

  After I updated my iPod lack of activation I need help ASAP

  Help here > If you do not activate your iPad, iPhone or iPod touch after installing iOS 9.3 - Apple Support