I need to stop her only flv video and keep the bg music playing

Similar Questions

• is there a way to NEST or MERGE videos and keep the audio waveform in the timeline?

  Hi guys,.

  I was struggling with solutions for my workflow.

  I do a lot a microphone on a single video track changes. Then when I want to apply and modify the presets, I must apply the effects on all the small changes (sometimes 100 edits in a 3 minute clip).

  So I learned about fusion - but the merger does not allow you to modify the effects in the batch. So in the above example, if I want to make a change in an effect in a merged item, I have to hold single OPTION click on all editions of 100 and then adjust the effects.

  Then I bent over the NESTING. It works pretty well because it transforms all 100 mounts in 1 clip and I can't batch "edict", which means that I can change the effects on all editions of 100 at a time (because it's now 1 clip on the timeline). "

  However, the problem I have now nesting is... get rid of the file audio waveform in the timeline panel. So now, it is difficult to edit audio.

  Is there a way to merge, merge or nest together to make 1 clip (like nesting) and also to keep the audio waveform on the chronology of the changes?

  Kind regards

  Try the sequence > rendered audio and see if you get a waveform.

• How to shoot the video and keep the quality?

  Hello

  I'm a bit new to this but I'm trying to do something of my own and this includes some work. I want to shoot a video at 90 degrees but keep the same image quality or do better if possible. I tried with HDV preset, but it shows some black bars on the edges and I don't want that. Also, if I use another predefined setting it show the image as it zoomed out and that affects my image quality. Can't do something so that instead of having for example a 1280 x 720 video, I'm going to rotate 90 degrees and I have 720 x 1280? I'll be waiting for a response.

  Thank you!

  File > new sequence, and then click the general tab (CS5) or parameters (CS5.5). Change the edition of office (CS5) or custom Mode (CS5.5) and configure your settings of the sequence you want.

• Need to install KB947821 update but fails and displays the error 9370001 code

  You will need to install KB947821 update but fails and displays the error code 9370001.  Does anyone have a solution?

  CrystalBall © SEZ...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I need something to smooth out grainy photos and set the color.  I have several photos that I need to use which has a blue cast on them.  Photoshop will remove the color blue?  I need an answer immediately.

  I need something to smooth out grainy photos and set the color.  I have several photos that I need to use which has a blue cast on them.  Photoshop will remove the color blue?  I need an answer immediately.

  Yes, photoshop can remove noise and remove color casts

• I could only underline, highlight, and etc. the text, but do not copy it to the ipad. How to copy a text in Adobe Acrobat in ipad?

  I could only underline, highlight, and etc. the text, but do not copy it to the ipad. How to copy a text in Adobe Acrobat in ipad?

  Hello

  When you select text in a PDF document, the menu appears.

  

  You can change the selection of text by dragging the blue "grabber" horizontally (left or right) and press to copy in the menu to copy the selected text.

  I hope this helps.

• HPW I don't tell WMP to STOP auto import of videos and photos. I want to do it manually. I am running Windows 7.

  Separated from this thread.

  I tried the instructions above and Windows Media Player still imported all my videos and pictures from my computer. I have the version 12.0.   I can't remove them from the library and keep them on my computer. But I want to tell WMP to stop importing forever. I want to do it manually.  I am running Windows 7.

  HI - no, you're quite safe - this is just a directory, and none of your videos and photos will be lost... It stops just WMP from the monitoring of these places.

  Follow my instructions to create a shortcut on the desktop (you can do this for youcam videos and public * so) and you can easily access it by this method. Best - R.

  * (same method but "users" you will need to select 'public' - 'public videos' to create the shortcut.)

• Can I need separate videos to allow a user to 'Play All' (from the beginning to the end) and select certain sequences (ceremony, reception which the sequence chosen start and end at the rest of the video and not the sequence, speech etc.)?

  Hi - I'm obviously new to yet, but that's what I want to do.

  In a wedding video, I want them to be able to:

  1 play the movie from start to finish.

  2. Select a sequence (say speech) who plays since the beginning of the sequence to the END of the whole video.

  So do I need 1 video for the room, as well as 4 sequences - reception, cake, speech, dance?

  Colin

  You can use separate videos or a single video. The only video is easier for your desired navigation. You will find more people asking how to get the 'chapter' or the video scene at the rear to a menu when it ends and also have a game all. So ignore the advice on those.

  Simple video:

  Your single video goes on a timeline. 'Play all' is a button in the timeline, and the timeline has an end action of "last menu."

  Menu of chapter has 4 buttons (plus a fifth to return to the main menu), going to each respective chapter marker. There is no action to end on chapter markers, so when a new chapter is reached, he continues to play as the piece all the.

  Several videos:

  Each video goes on his own script. The end of video action a timeline is timeline two video etc. Play all is a button that goes to the timeline one. The chapter menu also has a button go to chapter one, and it works identical to the play all. Each of the chapter buttons go to their respective chapter deadlines.

  Still may have some problems with a certain time lag, but I do not think that they affect either of these workflows. Don't rely on the preview again; burn a test disc and play on a DVD player.

• Export the clip with no video, audio only and keep the timecode

  I have transcribed for a documentary film clips. There are many of them and my transcribers using a program that can use the timecode of audio and video files.

  We are Dropboxing so I want them to be just audio files, but I need the timecode to stay on the clips when I export the audio.

  So far he strips and all I get is life.

  The original videos are in. MTS format. They import in first CC very well, but when I export the audio the initial timecode disappeared.

  The other option would be to compress the video and the watermark, but the time code disappears when I do that too.

  I think that I get it.

  You want just the files as small as possible. Right? That's why you just want audio?

  Well, rather than do without the video completely, just to reduce the flow of something terribly weak, where the video is barely able to be seen. You want to export to a format that the program can handle, like Quicktime. But where I could export to 25 Mb/s, you might be able to export 1 Mb/s. The video will look terrible. Well, so what? Who cares? Right?

  But there the timecode.

  When their web page says they can accept different audio formats, I don't think they hear audio by itself. They mean that the audio in the video stream may be audio AIFF, WAV, AAC and MP3.

• How can I get my Windows xp computer to stop moving in waves up and down the screen?

  Today I had to uninstall Windows XP Home Edition and resinstall it.  I also installed SP 2 and SP 3.  I'm slowly getting updates from Microsoft Update, but now I have problems with my computer when I'm online and up and down the screen.  Only, it moves slowly and in the waves.  What can I do?

  Do you mean that you have chosen to uninstall Windows XP and reinstall?

  What was the problem that forced you to do?

  Anywho, if you reinstalled XP did you get the latest video drivers for your system on site WWW of manufacturer video system?   What audio drivers?  Your sound is OK works?

  Video drivers that might be on a XP CD installation will probably not be the ones you need and it is never a good choice to use the updates of hardware which are available from the Microsoft updates - driver Microsoft made generally bad choice in this area.

  If you are not sure what you have or what video drivers you need, maybe we can help you find them if we only know basic information about your system (another shortcoming of Microsoft MS Answers).

  If you do this, we have more on your system:

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

  For information about the audio drivers, expand components, click Sound Device, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

• Fusion on Mac Pro - dedicate a guest only NETWORK card (and have the OS ignore)

  As the subject says. Such a thing is possible?

  I don't know if I'm looking in all the wrong places, or just to ask the question properly.

  Here's what I was wondering:

  I have a Mac Pro with two network adapters. I want to use one for the host (OS X) and the other only for the guest OS. And using it for the guest OS, I want OS x to ignore it completely.

  If possible, how to apply such a facility?

  1 OS X > system preferences > network > Hardware icon > set order of Service

  • In the Service order worksheet, have the NIC priority placing the card NETWORK to use for the host at the top of the list, followed by the NETWORK card dedicated to the virtual machine, and then click OK.

  2 OS X > System Preferences > network

  • Select the card NETWORK dedicated to the virtual machine, and then to configure IPv4: stop selection, then click on apply.
  • Then to configure IPv4: check the DHCP with manual address.
  • Then for IP address: use a reserved address of 169.254.0.0 to 169.254.255.255 IANA Internet Assigned Numbers Authority () and then click on apply.  It's the range of addresses for the automatic private IP addressing, which normally would be affected if the NETWORK adapter does not have a connection but not to worry, it will be... only for the bridge of VMware which will be defined in the next step.

  3 target Virtual Machine settings > network adapter > Bridged Networking, select the NETWORK adapter chosen for the use of the dedicated virtual computer.

  • Now the Virtual Machine will acquire its network router for the LAN Host Configuration information, or you can assign an address appropriate static IP, mask, subnet, gateway and DNS server IP addresses in the configuration of NIC in the guest OS if you wish.

  Note: If this doesn't work for you, even if as described, it works for me, you may need to manually select to configure IPv4: and use a reserved in the meantime address previously mentioned with a 255.255.0.0 subnet mask while providing the appropriate Host router LAN Gateway and IP addresses of the DNS servers.

  Another problem can occur if using a WiFi NIC dedicated to the virtual machine, some WiFi routers will not fill several IP addresses to the same MAC address.   If this is the case for you, then you will have to use wired Ethernet for NETWORK adapter dedicated to the virtual machine!

• burner Windows media player just stopped working - connect a burner and restart the player

  Original title: windows media player

  My burner windows 7 everything simply stopped working saying that I need to connect a burner and restart the player. Why is it a saying suddenly this and what can I do?

  Hi Noralie,

  Welcome to the Microsoft community.

  It seems that you are facing problems while burning the disc using Windows Media Player. It would be great if you can answer the following questions:

  1 have had any changes made on the computer before the show?

  2. What is the full and exact error message?

  3. what type of disc you are trying to burn?

  To resolve this issue, follow these methods:

  Method 1:

  I suggest to see the link and try to run the Troubleshooter:

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2:

  See the article and check if that helps:

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player

  I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• How to have a button full screen in flv player and where the other player of skin?

  Hello!

  Currently, I use Dreamweaver CS5 to create a page that plays FLV video.

  I use the feature since dreamweaver insert flv media, insert the flash drive in the html code.

  It works great but:

  - Did not have a button full screen (none of the 3 skins (clear, halo, corona)

  So where can we download more skin with additional options (dreamweaver compatible of course)?

  Thanks for help

  Mike

  This solution is not professional at all. We are a company...

  Ok. DW does not much.  Short to build your own custom player in Flash Professional, look in the site Adobe Exchange (see link below)

  http://www.Adobe.com/cfusion/exchange/index.cfm?searchfield=Flash+Player&search_exchange=3 & categorie_recherche = 1 & search_license = & search_rating = & search_platform = 0 & search_pubdate = & num = 2 5 & startnum = 1 & event = search & sticky = true & sort = 0 & rnav_dummy_tmpfield = & submit =.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• In Firefox. Every time I have cut a video and turn the sound back on it, the audio remains silent until I have to rewind the video a bit. Why does this happen?

  As the question inplies, no matter what video I play in firefox remains silent when I disable and reactivate the sound until I rewind. Why and how I fix this?

  It was very good work. Play well.
  Please report your last post as solved while others will know.

• When I start my computer im presented with two windows xp options and im invited to click on one of them, I want to only being active and erase the other's

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  FWIW... It is always better if you include your question
  in the body of your message.

  Your Boot.ini file needs to be edited... you should know
  You can make your computer useless if you
  do not pay attention.

  Proceed at your own risk *.

  Perhaps the following goods range offers a few ideas:
  (Search Google will find much more information)

  How to remove both Windows XP Professional on the boot
  http://www.ehow.com/how_6945283_delete-Windows-XP-Professional-boot.html

  (289022) how to edit the Boot.ini file in
  Windows XP
  http://support.Microsoft.com/kb/289022

  How to use and edit the Boot.ini file in Windows XP
  http://vlaurie.com/Computers2/articles/bootini.htm

  Additional information and help with the boot.ini file.
  http://www.computerhope.com/issues/ch000492.htm

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.