I tried each posted end and can't do the stub.exe or the setup.exe to run. The Task Manager shows the file is running, but absolutely nothing happens.

Similar Questions

• How can you save dead MacBook using FireWire for iMac? I can view all the files on iMac, but don't know how to back up before, I reinstall MacBook.

  My MacBook Pro doesn't start then you want to erase and reinstall iOS. Before doing this I want to back up all my files. If I connect to imac via FireWire I can view all the files, but how can I save it it?

  If your MacBook will start in target disk Mode, follow the instructions on how to set up and use...

  Share files between two computers with target - Apple Support disk mode

  But you do not want to share files, just to save them. You can make a "clone", using disk utility. For cloning utility purposes use a program likeSuperDuper! or double clone.

• research program box and can not find the file on my computer

  I went to click Start, type cmd, no program and file search box, where to type sfc/scannow to.

  You really should start with your problem rather than how to apply a patch you read.
   
  SFC
  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  sfc/scannow
   
  For the results of the SFC

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted.

   

  To see if there

   

  findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more

   

  There are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these.

• Firefox 10.0.1 does not; I just upgraded to Firefox 9.0 to 10.0.1, the download is finished, I clicked on the restart button; but absolutely nothing happens, no error message, nothing. I can't start Firefox in all.

  I have Windows XP SP3. Internet Explorer works, it's how I can tell you this. I have few plugins and nothing abnormal; in fact, before the pop-up window invited me to upgrade to Firefox 10.0.1, he first wrote a check for incompatible plugins and apparently found nothing.

  Maybe I should do a system restore and try again not Firefox 10 until the bugs are fixed.

  Thank you, guys.

  I did a COLD REBOOT, and Firefox 10.0.1 suddenly started working.

• Trying to get ending entry into force for the groups of lines

  Hello world
  
  I searched the forums, but I can't find a post that is a problem quite like that.
  
  I have some data that looks like this:
  

          ID_NUM     EFFECTIVE ALLOC_PERCENT   ACCT
  ---------- --------- -------------   ----
         101 01-JUL-11            21   A1
         101 01-JUL-11            72   A2
         101 01-JUL-11             7   A3
  
         101 01-JUL-12            20   B1
         101 01-JUL-12            80   B2
  
         101 01-JAN-13            20   A1
         101 01-JAN-13            20   A2
         101 01-JAN-13            50   A3
         101 01-JAN-13            10   B1
  
         101 01-JUN-13            50   A1
         101 01-JUN-13            50   A2

  (note: I inserted manually empty lines for clarity)
  
  Here's the logic: the lines represent an assignment of percentage on the account for the identification number specified for this entry into force. A new date to cancel the previous, and if any line in the conceptual group is replaced, so they are all.
  
  I'll try to find the date when the effective period of each group ended and which includes in the game so that I can calculate then the number of days in a given line has been effective; something like that;
  

    ID_NUM     EFFECTIVE END_DATE   ALLOC_PERCENT ACCT
  ---------- --------- ---------- ------------- ----
         101 01-JUL-11 01-JUL-12             21 A1
         101 01-JUL-11 01-JUL-12             72 A2
         101 01-JUL-11 01-JUL-12              7 A3
  
         101 01-JUL-12 01-JAN-13             20 B1
         101 01-JUL-12 01-JAN-13             80 B2
  
         101 01-JAN-13 01-JUN-13             20 A1
         101 01-JAN-13 01-JUN-13             20 A2
         101 01-JAN-13 01-JUN-13             50 A3
         101 01-JAN-13 01-JUN-13             10 B1
  
         101 01-JUN-13 <null>                50 A1
         101 01-JUN-13 <null>                50 A2

  The end_date of the group is the EFFECTIVE_DATE of the next group (ordered by ID_NUM, EFFECTIVE_DATE).
  
  End_date of two rows is zero because there is no group of lines with an effective date the later - in my process, I'll NVL which sysdate so that my calculations of days will be valid.
  
  I tried some analytical queries with LEAD, but I couldn't figure out how to get the next date of the efficient group. I could get the entry into force of the next row, but not the next group. I couldn't specify how many lead lines to look forward, because there is not a number of rows in each group.
  
  How to fill the end_date column?
  
  Here's the code to create the above.
  

  create table t
  (id_num number,
   effective_date date,
   alloc_percent number,
   acct_code varchar2(4)
   );
  
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jul-2011',21.0,'A1');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jul-2011',72.0,'A2'); 
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jul-2011',7.0,'A3');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jul-2012',20.0,'B1');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jul-2012',80.0,'B2');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jan-2013',20.0,'A1');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jan-2013',20.0,'A2');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jan-2013',50.0,'A3');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jan-2013',10.0,'B1');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jun-2013',50.0,'A1');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jun-2013',50.0,'A2');
  
  commit;
  
  select * from t;

  Oracle version information:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
  PL/SQL Release 11.2.0.3.0 - Production
  "CORE 11.2.0.3.0 Production."
  AMT for Solaris: 11.2.0.3.0 - Production Version
  NLSRTL Version 11.2.0.3.0 - Production
  
  
  Thank you very much

  Hello

  Here is one more way to do using lead work.

  WITH ds as (id_num, effective_Date, lead (effective_date) select on end_date (id_num order, effective_Date))

  t

  Id_num group, effective_date)

  Select t.*, ds.end_date

  DS, t

  where t.effective_Date = ds.effective_Date;

• Cannot access pc settings and can not unlock the taskbar? (Windows 8)

  This morning I turned on my pc and noticed that the lock screen had changed, so I logged in and then I realized all my apps on the home screen had been removed even those provided with windows 8, such as news and sports, even the tile Office had gone. I finally managed to get on the desktop and everything blew my taskbar, so I tried to unlock it, but whenever I did it automatically locked again. Then, I found refreshing the pc would be a good idea, but I can't even on the pc settings. I opened to the top of the sidebar, then click on change pc settings, but absolutely nothing happens, can someone please help soon!

  Hello

  Thanks for the reply.

  I appreciate your efforts to solve the problem.

  I suggest you to check if the problem occurs in a new user account.

  Create a user account
  http://Windows.Microsoft.com/en-us/Windows-8/create-user-account

  If the problem does not exist in the new user account, you have damaged user profile. You can follow the procedure to resolve a corrupted profile.

  Copy old files to the new profile:

  a. go to C:\Users\Corrupted_Profile_Name\. The name of the profile will be the corrupted ProfileName.

  b. copyall files.

  c. Open Panel and the display of folder options uncheck Hide protected operating system files.

  d. navigate to C:\Users\Corrupted_Profile_Name and copy the Appdata folder.

  Note: Do not copy these three files. NtUser.dat, NtUser.ini, NtUser.log.

  e. navigateto C:\Users\New_Profile_Name\.

  f. Paste all files here.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Windows Contacts now display an Adobe icon for each of them and when I try to open Adobe Reader 9.0 starts, then tells me that it can't read the file.

  For some reason any, that my Windows Contacts show now an icon of Adobe for each of them, and when I try to open Adobe Reader 9.0 starts, then tells me that it can't read the file.  I tried right-clicking and using "open with...". "to set a default value, but no other programs are listed as possibilities.  By clicking on 'Browse' of course gives me a window of the Explorer, but I have no idea what program select open Windows Contacts with.

  Contacts Windows used to work perfectly, and I have no idea if this problem started, or why.

  Can someone tell me how to open them properly, with the Windows Contacts program?  Thank you!

  original title: my Windows Contacts have Adobe icons and does not (Hijacked by Adobe Reader 9.0?)

  Go to: Control Panel, programs by default, associate a type of file or Protocol with a program.

  Scroll down to:...

  .contact... Click here to highlight, click on change program, click Windows Contacts.

  Make sure that there is the box... Always use the selected program to open this type of file.

  Repeat the process for:...

  . Group

  . P7C

  .vcf

  (Protocols)

  LDAP

• Cloud to adobe InDesign download fails with shoing error it can not extract the files in the temporary file.  I tried several times and restarted does not.  What can I do about it?

  Cloud to adobe InDesign download fails with shoing error it can not extract the files in the temporary file.  I tried several times and restarted does not.  What can I do about it?

  To refer to EX11 some:

  Creative cloud (WIP) error codes | Error postal codes of Mylenium

  Mylenium

• I am trying to install Adobe Photoshop elements Adobe Premiere elements 13 13 and can't find the serial number. Where is it located? It is a dvd.

  I am trying to install Adobe Photoshop elements Adobe Premiere elements 13 13 and can't find the serial number. Where is the serial number? It is a dvd.

  Quickly find your serial number

• I posted a question can not find the question and or response. Help, please

  I posted a question can not find the question and or response. Help, please

  AFAIK, you can't share a catalog like this.

  The only recommended method is to store your images and catalogue on an external drive, you can alternatively plug in both computers.

  With today the external USB drives, the speed is still correct, and many users are satisfied with this solution.

• Mac book air cannot detect my iPhone 6, after the cable on my I phone 6 to connect with my mac book air, nothing appear on the mac book. Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

  Hi, after plug the cable on my phone i 6 to connect with my mac book air, nothing appear on the mac book.

  Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

  Current situation is nothing exportable phone and also cannot do anything mac book because they cannot detect each other. Please advise, thank you.

  You can try to move to a different USB port. And if your just trying to swap photos try Airdrop. Also try to go here If iTunes does not your iPad, iPhone or iPod - Apple SupportHope this help, good luck to you.

• My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?

  My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?

  Apple ID cannot be merged. We'll see if we can get to the bottom of your connection error...

  Tell us step by step, in detail what your actions.

  Tell us a story

  -with a beginning, middle and end. We need to figure out what you know and that you have lived.

  If this problem is new, tell us what immediately preceded its appearance - add software, upgrade or update? New equipment?

  Quoted by of Apple  'how to write a good question.

  To help other members in answering your question, give as much detail as possible.

  • Include your name (peripheral) product and specifications such as the speed of the processor, memory and storage capacity. Please do not include your serial number, IMEI, MEID or any other personal information.
  • Provide the version of your operating system and the relevant applications numbers, e.g. "OS X 10.4.11" or "Safari 4.1.3.
  • Describe the problem and include all the Details on what seems to make it.
  • The list of troubleshooting steps you have already tried, or temporary corrections that you discovered.

  For a detailed 'coaching', please see usage tips , help us help you on these forums and wrote an effective communities of Apple Support question

  "Keep it short and Simple"-take your time... but be thorough - CCC

• DeskJet F4580: new router cannot get connection and can not find the whole upward on macbook

  I had to get a new router as I have had problems with my fixed internet internet problems but now my printer does not work unless I connect with the usb cable, I have tried everything including the abolition of the printer, which now, I deleted the setting up of information out of my macbook and can not install the printer please help it worked very well with my other router...

  Hey @gingerjean1,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I see that you have replaced your router and are having trouble with your Deskjet F4580 of connection to the network. I can help you with that.

  As you use Macintosh 10.7 I recommend the use of a Windows PC to install the printer on and then to add to your wireless network. If this isn't a practical option there are a number of things we could try.

  Apple Software Update

  1. Click on your Apple icon and go to software updates.
  2. Install the available updates.
  3. Apple's HP printer driversdownload.

  If during the installation there is no wireless options then:

  1. Go to your Apple system and print and Scan preferences icon.
  2. Double-click your printer icon on the left side of this screen.
  3. In the pop-up window, click on settings, utility, and then click Open Printer Utility.
  4. In this new window, you must have a wireless tab along the top, that you can click.
  5. On the left side, we are looking for a wireless configuration wizard.
  6. Run the Wireless Setup Wizard to add the printer to your wireless network.
  7. Once the printer is connected, disconnect the USB cable to the back of the printer.
  8. Return to the Apple, system, print, and Scan preferences.
  9. Click on the button "+" at the bottom left.
  10. In this window, select your printer.
  11. If there is a line indicating the use that says Airprint click to select your printer in the list instead.
  12. Click on Add.
  13. Try to print.

  Ad-Hoc

  If the method above does not allow you to connect the printer wireless, then it can work.

  1. Perform a factory reset the printer. I will include guidance on how to do so shortly in a private message.
  2. Turn on the printer.
  3. Press the button on the front of the printer wireless.
  4. Wait for about a minute.
  5. On your Mac or another wireless device, you should see a network with a name similar to "HP Deskjet F4500 XX Print" listed. To connect to this network.
  6. Press and hold the scan button (the icon of the printer under the red x on the printer) for 10 seconds. When you release the printer should print a test wireless report.
  7. On the device you connected to the printer, open a web browser and type the IP address in the bar of address exactly as shown on the test report.
  8. You should have a network tab along the top of this window.
  9. On the left side, we are looking for a wireless configuration wizard.
  10. When you run that must connect the printer to your wireless network.
  11. Once the printer is connected, disconnect the USB cable to the back of the printer.
  12. If you have connected your Mac to the printer above and then reconnect the printer to your wireless network now.
  13. Return to the Apple, system, print, and Scan preferences.
  14. Click on the button "+" at the bottom left.
  15. In this window, select your printer.
  16. If there is a line indicating the use that says Airprint click to select your printer in the list instead.
  17. Click on Add.
  18. Try to print.

  If it allows you to connect your printer to your wireless network and then do other forum users know clicking on accept as Solution below my post. Even if you have any other questions please let me know.

  I hope this helps and I hope you have a nice day!

• I have microsoft fix Center, there a {codec crashes fix} I used it and it has disabled the files I need, can someone tell me how reinable these files to help!

  I have microsoft fix Center, there a {codec crashes fix} I used it and it has disabled the files I need, can someone tell me how reinable these files, help please!

  Hi Shawnmehringer,

  Thanks for posting in the Microsoft Community.

  It would be useful that you can answer these questions to help you further.

  1. have you installed Microsoft Fixit Center on your system?

  2 are. what codec fix you referring?

  3. which files are disabled and you try to activate again?

  If the problem is related to Microsoft Fixit center, you can ask your question on the Forums of Microsoft Fixit to get help.

  Microsoft Fix it Center Forums

  If you need help to resolve any issues related to Windows, please reply and we will be happy to help you.

• After backup files and restoring Windows XP, I can't open the files backed up.

  After backup files and restoring Windows XP, I can't open the files backed up. The files are password on a user account. I know the password. But the message received when you try to open them is: access is denied. Drag / drop the files in 'Shared files' result in the same message. I know that the files exist, because when I open backup and browse for them, they are displayed. Is there a method to open? I have Windows XP Media Center Edition, Version 2002, Service Pack 3 update. I tried to back up the files with backup of backup, but it does not work.

  Hi error,.

  I suggest you follow the article in the Microsoft Knowledge Base and check.

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  I hope this helps.