I tried to find if there is such a thing as a hard disk copy program

I tried to find if there is such a thing as a program that copies the reformat your HDD so that if you install all your programs fully functionally only from the copy, he created... I have a few old Player library programs that are no longer available online where I would always reinstall them, and I can just save the files with the likes of justcloud because it does not copy the install also, which means that after that I restored files I won't be able to open or use... Help, please...

Yes, there is.  It's called "imaging".

1 you can do a system image using Windows backup.  Open this utility & look at the left side of the window.  You will see create a system image.  A click on it and run it - choose an external drive to put the image on.

2 then return to Windows Backup & see on the left side of the window.  You'll see, create a system repair disc.  A click on it and run - you'll need a CD or a writable DVD (R or RW).  This gives you the ability to restore the image of the system, even if your PC is unable to initialize.  When you have done the system repair disc, boot from it to test.  Make sure that you go so far to have to make some language / keyboard selections & then get a menu of repair - receive this proves that the ERD is correct.  Then you can cancel the operation and restart normally.  If you don't test it then you run the risk of it reveals to be defective only when you try to use it in an emergency.

Using the image of the system in the future

3 you put the system repair disc in the drive and connect the external drive containing the image of your system.  And then you start / restart your PC.  When you reach the menu repair [that you saw during the test] tell you him that you want to restore from a system image.  Then, he a look & think identifies the external as disc containing an image and then request your confirmation that you want to restore from it.  Executes this routine restores your PC exactly the state drive wherever it was when you made the image of the system.  You would like to have a backup of all your data because you're not likely to want to make a new image whenever you modify a data file [so the system image will always be a little older than your data files].

Choice

4 there are many backup applications that can make system images.  Acronis TI is just one example, & it is supposed to be much better than the Windows backup.  You will need to consider which app to use for images & which one to use for backups of data file.  But it's a long story & opionions differ on which apps are the best.

Tags: Windows

Similar Questions

  • where can I find the windows of the installation files on the hard disk of a machine that has the pre installed software and recovery software?

    where the windows installation files are stored on a disk hard if the software is preinstalled. My systrm broke down and will not restart, want to re window installation but do not have a disc, samsung refuse to number one, all I want to do is to reinstall windows 7. to access the command propt and can launch the 1st screen of the windows setup, but when it gets to step 2 his request that the drivers can be installed. any idea?

    If victory has been pre-installed by Samsung how to recover as long as the plant is a Samsung process, usually through the hidden restore partition.

    There is nothing on the drive on which the end user can use to reinstall other through instructions Samsung.

    On some PCs from Samsung, you press F10 as the PC starts to access recovery.

    Be aware that if the player does not, you will not be able to recover.

    Only Samsung can provide the recovery disks, or the means of recovery in the factory.

    Although there is an ISO official win7 download to create the installation win7 dvd for use with your Win Key.

    If you use this method about the utility Samsung provided will be installed and you will need to visit their drivers Samsung support

  • Is there such a thing as the node master RAC cluster?

    The GI version: 11.2.0.4

    Operating system: Linux/Unix platforms

    Cluster CARS being an ACTIVE configuration / ASSET, is there such a thing as master node in a RAC cluster?

    If there is such a thing as a master node, in a 4-node RAC cluster, how can I find which is the "master" node and why it is called a "master node"?

    Unlike some cluster systems, it is not really a "master node" for Oracle Grid Infrastructure. This link of @rchem to the Uwe Hesse blog entry contain information about a master node but note carefully the specific tasks for this master.

    Oracle clustered systems have resources. Everything is a resource. The listener is a resource. The instance is a resource. A block of data is a resource. Each resource has a master node and that node may be all in the cluster. And resources of the same type can have different masters. If just because Node1 is the master of the resource for blockXYZ does mean that Node1 is the master of the resource for all blocks. BlockABC can have his mastery of the resource on Node2.

    Most people think of a master node like the one that makes decisions for the rest of the cluster. For example, here is a link to a Dell article: http://en.community.dell.com/techcenter/high-performance-computing/w/wiki/hpc-cluster-nodes

    In this article, it says "the General function of the master node must be the mastermind behind the group." However, GI of Oracle cluster doesn't have this concept. There is no a node responsible for the rest of them. All decisions that need to be made are distributed on all nodes of the cluster, piece meal.

    HTH,

    Brian

  • "Edit" button to select several guest in 10 g. is there such a thing in 11g?

    Hello

    in 10g, when users work with multiple selections guests, they can click the button modify and paste values. I wonder if there is such a thing in 11g.

    Any help appreciated.

    Once you drop to the bottom of the list, click on "Serach."... »

    If it helps pls mark as correct

    Published by: Srini VIEREN on 24 January 2013 15:32

  • Is there such a thing as a flash 3D file?

    I've heard this term thrown around but was skeptical, if there is such a thing as a flash 3D file. Then... there at - it?

    TIA

    Dean

    You can create things with newer versions of Flash 3D, and there are third party such as PApaervison 3D classes that provide also features 3D for Flash files.  So yes, there is such a thing, but I wouldn't say that it's called "Flash 3d file. It's just a Flash file that has 3D features designed into it.

  • Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer?

    Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer? I've looked everywhere but I can't find one. I hate the son, and I try to clear my desk of as many people as possible.

    # USB is cable only.

  • trying to find model # of my laptop

    Hello, trying to find the model number of my cell phone. IE HP Pavalion, etc.. I have the model numbers, but I don't know what type and model of my laptop is.

    Hello

    You can use either the complete model number or the product of the laptop no - see here for a guide to the location of such information.

    When you have this information, enter on the Page linked below.

    http://h10025.www1.HP.com/ewfrf/wc/siteHome?lc=en&cc=us&=

    Kind regards

    DP - K

  • I'm trying to find what options to license our University has for VDI student use.

    VDA and the use of the student

    Hello

    I'm trying to find what options to license our University has for VDI student use.   With 2000 students we would really here the year 2000 VDA licenses.  Are there other options out there?

    This license information can be found here:
    http://www.Microsoft.com/licensing/software-assurance/Windows-Virtualization.aspx

    It is a peer-to-peer forum. You must contact Microsoft about licensing issues.

  • I am trying to find a downloadable version of windows service pack 2-3

    I am trying to find a downloadable version of windows xp SP2, im running on service pack 1, and the need to upgrade pack 3 through 2 then 3.  the automatic update will not work and the download file, I've found is IT multi users! How do the 3 pack?

    Although there is mention of this multi users, individual users can use these files, too. :-)

    It's not important to upgrade IE6 until AFTER the SP3 is installed.
    Here are the detailed instructions:

    1. download the installation of SP2, SP3 and IE8 files. I prefer to keep these on a USB key, but this is optional. Here are the links to all the installation of three files:

    http://www.Microsoft.com/download/en/details.aspx?ID=28 (for SP2)

    http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

    And if you wish, download the Setup file of a good anti-virus program. I recommend Avira free Antivirus:

    http://www.Avira.com/en/Avira-free-antivirus

    2. disconnect Internet.

    3. temporarily disable the automatic updates.

    4. install SP2. Restart TWICE.

    5 install the SP3. Restart TWICE.

    6 switch to IE8. Restart TWICE.

    7 install an Antivirus software.

    (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

    8 make sure that firewall Windows is activated (it should be).

    (Now you can physically reconnect to the Internet.)

    9 visit Windows Update to download and install only the critical security updates.

    10 re - enable automatic updates.

    After the back if you need guidance.

  • I keep trying to find ways to update all my drivers at a time, as many problems with this computer

    ORIGINAL TITLE: update drivers, fixing problems, etc. NOTHING WORKS.

    I keep trying to find ways to update all my drivers at a time. There are so many problems with this computer, I'm so frustrated and things on it, I have to PAY TO ASK a QUESTION FOR CUSTOMER SUPPORT. Seriously, I'll blow my head because this trash is so UN-easy to use.

    Is - it really too much to ask for a single ' difficulty my * ing of the computer problems "button?

    Here is a list of what specifically is messed up. I don't want to spe backspace to show what I mean.

    I type really fast and never skip a key. Howeer, the computer ignores the keys as in the words "SPE" and "howeer" I typed jut. Now it's "jut" instead of "right".

    So, there is a problem that should not be happenng.

    Secondly, I play some games including the [scroll] scrolling bar on the frame-inmousepad does not work, period. 2011-2012 release, so it's something I can't fix on mymouse of course. I tried fixing it, and he says he successfully fixed wa. LOL no, it wasn't, it's just * ed even more.

    I refuse to poor a ton money int. f fixing these problems because I simply don't trust they're going to fix anything, and these problems should not occur initially.

    k so bye, go go rifle my brain of becaue it's so rustrating.

    Hello
     

    1. does come with any specific application?

    2. who is the manufacturer of the computer?

    3 did you changes to the computer?

    Keyboard problem:
    Method 1: Try with the keyboard on the screen and see if it helps.
    Method 2:
    Check if the problem persists in safe mode with network, to start the computer in safe mode, follow the below mentioned article:

    Link, please refer to: start your computer in safe mode:
  • Classic BlackBerry trying to find a Blackberry QWERTY without wifi

    I'm trying to finf a blackberry with a QWERTY keyboard phone ISN'T just a wi - fi access. I don't really know much about cell phones, so if anyone out there has any suggestions as to what models I should, please speak in terms laymans. I have a child in college who asked a QWERTY texting phone but doesn't have wi - fi connectivity. This who should I look for? Thank you very much for your help.

    Answered here:

    http://supportforums.BlackBerry.com/T5/BlackBerry-Curve/trying-to-find-BlackBerry-without-WiFi-acces...

  • my internet connection has been cut, and then I tried to find out. I opened the Troubleshoot, it says that I need to install a driver for my network card. I use Windows 7 Ultimate.

    Two days ago my internet connection has been cut, and then I tried to find out. I opened the Troubleshoot, it says that I need to install a driver for my network card. I use Windows 7 Ultimate. What should I do? Should I re install windows 7 ultimate on my computer?

    Hello

    What brand / model of the computer?

    There is no need to re - install Windows 7. You just need to install the network card drivers. Check out the link and follow the steps.
     
     
  • I'm trying to find the part number for disc hard Caddy/cage for second in DV7-2050ea SATA drive

    I'm going crazy trying to find a hard disk to the second disk Caddy hard bay new DV7-2050ea, I tried to ask HP, but nobody want to help there at the present time. I have the second disk ready, just the shopping cart/cage to put in and I have RAID configured for mirroring of the main hard drive.

    Any help would be great, (HP parts web pages do not seem to work for me in explore or firefox).

    Thank you

    Paul

    Thank you for your help, it is on its way to me from the supplier that you suggested.

  • Hi, I'm trying to find a way to move my photos from SD card instead of copy then.

    Hi, I'm trying to find a way to move my photos from SD card instead of copy then.

    But in import, the move option is anticrochetage, only one can be selected.

    I would greatly appreciate your help.

    Regards and thanks in advance for your help

    PS My SD card is not in the locked position, and I use Lr 5.6 for Win

    There is no built-in way to "Pass" the photos from a camera card import in Lightroom.

  • Detection and event listener? Is there such a thing?

    I was wondering if I have a Stanley event (mouse, keyboard and enterframe,... event) who goes off, and when he finished his event.

    something that is able to detect the finished event listener and fire on another series event.

    It works more like MOTION_FINISH in TweenEvent, but it is only available for TweenEvent only, what happens if I want to detect a mousclick, keyboard enterframe or even touch event?

    Is there such a thing? Thanks in advance.

    If you have an event listener to catch the occurrence of an event, normally have a function handler for this listener such as additional measures can be implemented.

    If an event is detected, the event listener has finished processing it, as soon as it started.  It intercepts the event occerence and triggers it corresponding to the handler function to take action.  There is no delay in this transformation.

    Events are instantaneous occurrences, they are not something that happens over time.  Even the MOTON_FINISH event occurs as soon as the Tween ends its movement.   If you look to the top of the event class in the help, early documents, you will find a long list of all the event subclasses that are extensions of it.  And each of these subclasses are likely to have a list of constants.  MOTION_FINISH, CLICK, ENTER_FRAME, etc. are all constants, and each of them represents the end of a particular set of treatments.  A CLICK event occurs when a MOUSE_UP event occurring after an event MOUSE_DOWN... each of them happens to an instance of time, not over time.

Maybe you are looking for