Similar Questions

• I'm trying to make the movie and burn

  I'm trying to make the movie and burn it in yet. I change the quality settings predefined in full HD and when I burn yet I get the default which is 720 x 480 (default) what I need to do.

  They will be as strong as you can get with SD

• I updated to Windows 10 and then back to Windows 7.  Now Adobe Reader does not work.  He said: I'm missing acroread.msi.  I tried to uninstall the program, so I could re - install, but it will not uninstall either lack of acroread.msi.  Pouvez anyo

  I updated to Windows 10 and then back to Windows 7.  Now Adobe Reader does not work.  He said: I'm missing acroread.msi.  I tried to uninstall the program, so I could re - install, but it will not uninstall either lack of acroread.msi.  Can anyone help?  I tried all the troubleshooting steps that I could find in the forums and online without success.

  

  I managed to fix it.  I found the Mr. Fix It tool on the Microsoft Web site and who was running, and it worked.  He fixed the corrupted registry file and allowed me to install the player.  I had tried it once before, but it has not been successful.  This time, it worked.

• I have 6 profiles but should clean up so I did only 1 'inbox' and 1 'sent' - just converted from Eudora 7 and trying to make the similar user interface.

  I just converted to Eudora paid 7 (after many years) to Thunderbird, due no problems of SSL certificate supported by Eudora.

  So far, I like Thunderbird but tried to imitate the simplest UI for Eudora. In Thunderbird, my 6 profiles are listed, each with its own subfolders «Inbox, drafts, sent, Trash & Archives» There is a long list of menu on the left side of my screen.

  Is there anyway that I can consolidate these profiles so that all incoming messages appear in an Inbox, regardless of the target profile. Similarly, can I consolidate the 'sent' and other subfolders?

  Thanks for any help you can give.

  Dave (Thunderbird newbie).

  lets start terms.

  A profile is something that keeps all your settings of Thunderbird. I think that your calling account profiles. but I could be wrong.

  You have two options here.

  First for POP e-mail accounts, you can use the global Inbox Menu Tools > account settings > server settings > advanced Note that makes the account disappear from the folders pane, so that the messages should be moved to the Inbox of the local folders first.

  For IMAP accounts, there is the unified view of the folders view menu > folders > unified. IMAP accounts can simply not use a record combined due to the synchronization of messages with the server.

  Be very sure of what type of account you set up. IMAP accounts for those who have not used their and aren't aware of the synchronization of emails can be a 'new game '.

• After you have reinstalled XP, trying to make the updates of Windows, getting error number: 0x8024400A

  I reinstalled xp system and have tried to make windows upated but I get the error number: 0x8024400A I tried to do what others say to do but Thies is not working I can't do fixit or me sat

  http://support.Microsoft.com/kb/2497281

  You may be unable to access the Windows Update site...

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:
     winver

     A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

• Fusion 7.1.0 trying to make the new VM: with vmmon module Version mismatch: expected 304.0, got 279,0.

  Running Fusion 6 on 10.8.5 using a variety of virtual machines, mainly Linux. Everything worked well, until (stupidly), I decided to move to 7. I downloaded the installer, plugged my new serial number and (once again stupidly) has decided to upgrade the hardware version of my old VM Ubuntu before you run it. Who knows what bad happened, but I got the dreaded error "cannot find a valid peers to connect to. Tried a bunch of stuff, nothing worked.

  Has decided to make a new Ubuntu 14.10 VM, since my old one was having some problems still. Downloaded the ISO installation, went into the new setup process VM, customization of the things I've done dozens of times before. Tried to launch the new VM, received the following message:

  With vmmon module version mismatch: expected 304.0, got 279,0.

  You have a bad version of the module kernel "vmmon.

  Try reinstalling VMware Fusion.

  I tried to simply remove VMware Fusion.app, no dice. So, I went through this nice article VMware KB: manually uninstall VMware Fusion and remove each piece of VMware, I could find. Reinstalled from the .dmg, set up the new virtual machine again and still the same error.

  I went through all of these steps by downloading Fusion 7 that these questions tonight, so there is no update to download. I searched in vain for similar issues, if I missed somehow please tell me a workaround solution. Otherwise, I need help!

  Hi MattDMoand welcome to the VMware communities!

  The first (and usually easiest) step to try is to restart your Mac.  You see the error message suggests that Fusion 6 is quite not stopped cleanly when you finally ran, interfering with the new version of merge that you restart.

  Let us know if this solves the problem!

  --

  Darius

• Get an "unknown error" so he was trying to make the Vista SP1 and the error code 800F081F

  I am running Vista Ultimate.

  I installed the hotfix for Windows (KB947821). I always get the "Windows has encountered an unknown error" with the code 800F081F.

  I am also having .net Framework questions (why focusing on my updates in the first place, I started). I have "fixed" but was lifting a msg of error at startup:

  > Unhandled exception has occurred in your application. If you click on > continue, the application will ignore this error and attempt to continue. If > you click on exit, the application closes immediately.

  > There is a parsing of the query error. [The line number of tokens = 2, token line > offset = 27, token s = error]. (I have more error msg if necessary.)

  After you install the hotfix, this error disappeared, but I can't yet download the update of the SP1 for Vista. It is a sine qua non for SP2.

  Help, please! Anyone? 8

  * Title *.
  I get an "unknown error" so he was trying to do the update to Vista SP1, even after the installation of "fix" and always error code 800F081F

  KonfusedKathy,
  I suggest that you do the following:
  Start by putting your system in a clean boot State.
  Run the disk error checking
  Run System File Checker
  Run the System Update tool
  If there are not only found problems that couldn't be fixed by one of them and then try to reinstall SP1.

  Post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista: Cascade issues, ending in Mode without failure. Can't make the necessary changes to get out of Safe Mode.

  First of all, I use Vista Home Premium on a Toshiba Satellite P205-S7469. Recently had a problem with Office 2007 - after three years, he suddenly asked for the key, that he refused.

  With the help of the MS Support, we uninstalled and reinstalled Office 2007.

  Uninstall Office 2007 also uninstalled a certain number of updates. Over the next few days, update submitted updates for installation, I did.

  Then, email web-based Yahoo has stopped working. Went through several days to uninstall then reinstall updates. Never could say update caused the problem, but it is solved.

  Then, Microsoft Security Essentials began to malfunction, causing very long boots first and not automatically start. Make several settings to automatically load services, forums and for a day or two, it worked. Then no. Necessary that I manually start each time you start and had three or four attempts with waiting times, every time.

  Uninstalled then reinstalling MSE, then ran Live OneCare Safety Scanner.

  Also, all of a sudden, I have acquired an 'unknown device', which repeatedly invites me to install a driver. It is not known (to me as well as to the computer), we find no driver. Tried to disable the device, think that may have contributed to this problem, as well.

  It seems that LOSS may have removed items from the registry. I tried to use the system restore, but don't think it worked, and SR does not work with the updated - uninstall updates or to find and install new updates. It seems that Safe Mode does allow me to do something to help me, but I can't seem to get by.

  Hi renewbee,

  You can configure the computer to boot and check if the problem persists. It will start Windows Vista by using a minimal set of drivers and startup programs and helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135

  Hope the helps of information.

  Please post back and we do know.

• What is the html code to make the horizontal boxes, I need to get some boxes left to right, but all I can find is above the other

  What is the html code to make the horizontal boxes that I do some boxes go from left to right, but all I can find is above the other, you can see an example here car insurance quotes where the boxes are next to each other, and will this affect the page width on my site. Someone told me use DIV tags but how do i put this in HTML code?

  You might be better off using a Table element.  See http://www.w3.org/TR/html401/struct/tables.html

  Steve

• HP Deskjet 2544: trying to make the new scan shortcut in HP Deskjet 2544 all-in-One

  Hello

  Due to a major computer crash, I recently had to buy a new computer and so I also had to buy a new printer because my Photosmart old was not compatible with my new system.

  I currently have a HP Pavilion 23-g017c (x 64) AMD APU A6-5200 w/Radeon HD Graphics, running Windows 8.1 and using IE 11 with Zone Alarm Firewall and Antivirus & spy.

  My new printer is an all-in-one HP Deskjet 2544.

  I'm trying to see if there is some way I can add a new shortcut to my scanning options that will allow me to scan a document to my computer apart from these two options now available (PDF and TIF).

  I would like to be able to scan directly into my Microsoft Office Word 2013 program if possible.

  The reason is because I find it easier to edit and print then my word a PDF program program.

  Is this possible?

  Thank you and best regards,

  2harts4ever

  Hi @thefewtheproud

  I did some research, and it turns out that you don't aren't likely something wrong. I downloaded the software for this printer, and it seems that the software version 32A omitted the ability to save your document as what files whether other than PDF or TIFF.

  With the older software, the solution I posted above would have worked, but I feel that our software has taken a step backwards rather than forwards. The only solution I can think of at this point is not ideal, but it is doable. You can download a file converter, save your files in PDF format, then convert them.

  I even tried to save a scan in PDF format, and then open them with different programs and saving it using the "" save under "and change the file type it." I chose .txt, but then when I open it in Word or a Word program, the formatting is lost.

  Basically, the only thing I can suggest is a conversion program. I'm sorry I misinformed you in my first post, it was an oversight on my part, I forgot that the software version 32 differed from older versions.

• How to make the high quality look smooth and not grainy photo?

  I uploaded a picture of my camera and when I change it on Photoshop, it seems pretty grainy.
  I'm doing an assignment for my photography class where I have to imitate the project of photographer and I chose this picture http://ic.pics.livejournal.com/_pinkpornstar_/1198725/322258/322258_original.jpg.

  However, once I took the picture, I have now is quite high in quality and import it in Photoshop, I can't find a way to make it more clear than "professional" photos out there!

  I know that if I Zoom, it becomes less grainy, but even after I record and zoom, the picture is still not as smooth as the one I aim.

  Is it because of the settings that I used while taking the photo?

  PS: Sorry for this fundamental issue, I'm a noob to this.

  JPEG quality is never (or not as high as possible). Shoot raw and process in Camera Raw, where you have total control over all other treatment and noise reduction settings.

  JPEGs are self-treated behind doors closed, highly compressed and throw large amounts of data.

• I don't see the anchor point in my menu, why? I tried to make the visible invisible items...

  Hello world!!

  My name is Tinucca. This is my first time in this forum. I recently bought the package of creative cloud for students. I'm getting started with Dreamweaver and learn to tie things.

  When it comes to creating anchor points, I can't see where the anchor or anchor named, or any regarding anchors in my menu.

  I visited the help page and does not solve my problem.

  I did the path of view invisible items - Visual AIDS - and it does not work either.

  Can someone help me?

  I'm looking forward to any useful answer.

  Best!

  Named anchors are deprecated (deprecated in HTML).  Adobe them removed from the Cloud version Creative DW.  That's why you can't find them.

  From now on, if you link to something on the same web page, give your element and the ID.  The IDS are unique values and can be used only once per page.  IDs can have another name with Aa - zZ alpha characters. No spaces, special characters or the main authorized numbers.

  Example:

  ID = "fantastic"> This is my new fantastic web site

  A link on the same page:

  Fantastic link

  A different page link:

  Fantastic link

  Nancy O.

• tried to delete the mails that look like spam, regardless of how many times I delete it all boils

  woke up this morning to four emails in my folder that have been dated to 31/12/1969 I sent it to my trash several times but they always see save it in my Inbox. What can I do to get rid of this in addition to the hard reset? also if I decide my phone back until the potential threats could I face?

  Log on to the web portal of your e-mail account, and then delete it

• How to make the computer to look for SBRIO on a LAN connection when wireless connections LAN and are active

  Hello

  I plugged my laptop to a SBRIO using a cable, I also did the same mask subnet the SBRIO and my wireless connection for laptop is also active. I run an application to transfer files from the network to the SBRIO. I was able to download the files from the network using the wireless, but when I try to transfer the files from the laptop to the SBRIO the application attempts to use the wireless instead of the connection to the local network. Is there anyway that I can apply to use the LAN connection instead of wireless?

  Thank you

  Mouda.

  You must manually configure the settings for the SBRIO and map NETWORK cable on the PC. They must be presented on the same subnet. Using the crossover cable, you can configure your PC to use an address like 192.168.0.10 with a subnet mask of 255.255.255.0. Configure the SBRIO to use an address as 192.168.0.11 with a subnet mask of 255.255.255.0. The PC uses the network connection by default for all addresses that do not match the specific subnet on teaching secondary (cable in your case) NIC

• Error codes 643 and 8007371B trying to make the updates of windows vista.

  Need to figure out how to fix these error codes.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008
  http://support.Microsoft.com/kb/947821

  You receive the error code "0 x 80073712" or the "Windows features" dialog box is empty when you try to install the updates or components in Windows 7 or Windows Vista
  http://support.Microsoft.com/kb/931712/en-us

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  Windows Update error 80070643
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643