I want to learn how to set the new tab page to load at startup of firefox (as the homepage only).

Similar Questions

• Measurement of Phase difference of audio - learning how to set the reference

  I'm trying to measure the difference in phase between two audio inputs. (Left and right channel of my sound card)

  Both are free running 1 kHz audio samples that come in and out of phase.

  When the samples are in phase, everything seems to work fine and shows no phase difference.

  However once that signals start to emerge from the +-10deg phase the result keeps jumping around.

  It seems to be the fact that it is changing the reference to determine the phase.

  When I view the phase of the output of a channel is a sawtooth waveform, from 250deg and then wraps round to-110deg

  What I want, it's an entry set to 0 degrees and see the other inputs of difference of phase against it.

  Is there a way to give a signal as being the reference or another strategy?

  Thanks in advance for any help.

  PLEASE NOTE THAT THE acquire.jpg IS ACTUALLY THE VI.

  It wouldn't download like the vi. Please rename extension to acquire.vi to see.

  Finally managed to find the problem.

  Red rooster, I tried to replace your entries simulated with audio inputs card his real world and things turned out horribly.

  It doesn't seem to be a translation between the two. (Perhaps because of my understanding of Labview garbage)

  LabVIEW uses the internal reference of the DAQ cards in order to make phase measures.

  That's what all use the phase VI of measure and which lack of cards not NI - DAQ.

  That's what I thought that missed me first place but there's no way I can see simulations your own.

  To work around the problem, I used zero crossing detectors in order to compare the time ahead or lagging behind the benchmark for the calculation of phase.

  I got the core of the detector from somewhere on the forum but have lost the actual page. (my apologies to the author who deserves the credit)

  Anyway, hope this hepls someone.

• setting for new tab page

  I used to have my settings so that if I open a new tab, it would open a new Firefox home page.
  Since I updated to Firefox, if I open a new tab, it's a blank page.
  How can I restore to open my Firefox home page?

  Hi, in addition to the above, if you want only the new tab to be the same as your home page, you can use the Add on new tab homepage instead.

  You will then need to restart Firefox for all changes to take effect.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• How to set the height width for an Image field in a web App?

  I have a webApp to save the image of user with description, title. But when I display all items pictures are great, I want to know how to set the height and width for images?

  Hello

  To do this properly, you need to resize the image. Prefably before you put it in British Colombia. While you can to scale the image in CSS, you don't want to do. Why? Because the images are still very large and probably not optimized properly for the web.

  This means that the page with these images will take a long time to load for people, and people will not be happy on the display of your site.

  You must use a software such as photoshop, if you or iphoto on a mac for example for editing, crop and size of the images before uploading. If you do everything you can use free web based tools such as this one:
  http://Pixlr.com/editor/

  You can also do in British Colombia itself in the file manager. If you click on the image you can see options to resize. The downside to this is's done it by pure mathematics. He doesn't know what is in the picture and the results can make the image etc. shrivelled.

• How to set the new tab to open a homepage

  After the recent update to version 44.0.1 I lost the ability to open a new tab and open the new tab homepage. Someone can help me.

  Thank you

  Do you mean when you open a new tab, you want to see your regular home page instead of the page of the new integrated tab on Firefox?

  41 of Firefox is no longer uses the browser.newtab.url setting in about: config because he was constantly attacked by malware. From 41 of Firefox, you need an add-on to change the new tab page.

  Here are a few options (I'm learning more all the time):

  • If you are already using the "Restorer of classic theme" or "Tab Mix Plus" extension: There is an option somewhere (!) in his dialogues of the parameters to select another page in the new tab.
  • If you want to use your new tab homepage: Try https://addons.mozilla.org/firefox/addon/new-tab-homepage/
  • If you want to set another page or a completely blank page: Try https://addons.mozilla.org/firefox/addon/new-tab-override/
  • If you want the cursor to move in a search box in the page: Try https://addons.mozilla.org/firefox/addon/custom-new-tab/

  Use only one of these methods at the same time, otherwise there may be conflicts and dysfunctions.

  Setting up substitute new tab and new tab custom

  After installing one of these extensions, you must use the Options page to set the new desired tab page (instead of use subject: config).

  Open the page modules using either:

  • CTRL + SHIFT + a (Mac: Cmd + shift + a)
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then on the side right, find the new tab replace or custom new tab and click on the Options button. (See first screenshot attached).

  New tab Override

  Depending on the size of your screen, you may need to scroll down to enter the address in the form. (See second screenshot attached). For example:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page

  Then tab or click this form field and you can test using Ctrl + t.

  Custom new tab

  It is easy to enter your favourite homepage address. If you check either of the boxes, the expansion will set the focus in the page as well, for example, the cursor will be in the Google search box. (See third screenshot attached). I had to leave Firefox and start it up again before new custom tab started working, but this may have been due to tests so many extensions back to back.

  Success?

• I want to know how to use the fingerprint, that I had to my notes

  I want to know how I put the finger impression that I would be in settings on my notes please

  Not quite sure I understand what you are wanting to do.

  There is no way to use the fingerprints Notes ID secure. There is no real way to even set a password for the default Notes app.

  If you use a 3rd party notes App that claims to support this feature, then you should tell us that one.

  There is no way to integrate the stands of fingerprint ID Notes like her.

  This is a feature which will come with the next update iOS: iOS 9.3.

  Thanks to anypats for the clarification.

• How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  I found a solution! -Set the size and position of the façade with the help of the

  File > VI properties > window running Position (in category list) > custom (in position of menu drop-down).

  then just accept the current position and size (leave the boxes checked) or set values you want directly (uncheck the boxes and fill in the numbers), or physically position and size the façade and use, the "set to current location" button and press "set size" current All that is easier for you.

  OK so it does not make use of the method VI Methods (Active X) FPRunTimePosRunCustom ([Position], [Size]) but if labview want to make him difficult to use then other means must be found.

• How to set the path of the report in a plugin for model

  I'm trying to figure out how to set the path of the report in a plugin process model. I can't find a way to have access to it. It seems this would be a reasonable thing to do since the plug-ins are for the treatment of the results. Does anyone know how to do this? We generally use the sequential process model, but I try to keep my plug-in as independent as possible.

  Thank you.

  If I understand correctly, you want your plug-in, when enabled, change the settings of all other instances of the report OR plugin as their reports share the same directory that your plug-in is configured to use.

  If so, your plug-in can access and change the settings of all other instances of plugin. All instances are passed to all the points of plugin entries in the subproperty of the plugins of the ModelConfiguration parameter table. You can browse this table. Any element of the array with an equal to "NI_ReportGenerator.seq" Base.SequenceFilename is an instance of the report OR plugin. Its report options are stored in the element under PluginSpecific.Options.

  You can change the report options to what you want. Note that the recall of the ReportOptions model is called from template-plugin Initialize entry point, then you might want to ensure that your changes are applied after that, so they are not replaced. To do this, you could make your changes in the Initialize entry point of your plugin and make sure your plugin runs last. To rotate the last, you can set the FileGlobals.ModelPluginComponentDescription.Default.Base.RunOrder in your file of plug-in with a value greater than 0, for example 1.0 (see Help for TestStand > Fundamentals > process template Architecture > plug-in for the model process Architecture > Structure of the plugin sequence files > plugin model of entry Points > Order Execution of Point of entry at run time).

• How to set the value of a variable in a cluster in LabVIEW to c#?

  Hi guys, I'm working on a small c# program, which by using the interface provided by LabVIEW.  And I know that, with the help of lv. SetControlValue (name, value) can set a variable just on the front panel. But in my case, there are several groups on the front panel. Then it confused me how to set the variables in these groups. For example, there is a cluster named clusterA and a variable named a., I tried something like this:

  lv.SetControlValue("clusterA.valueA",1);
  

  but it totally inoperable. Everyone has some experience with this sort of thing? Thank you very much!!

  Hey guys, thanks a lot for all your response. I just found a simple way to solve this problem. For example, there is a cluster named "ClusterA", and there are only two witnesses, who are: an int value named "IntA" (default = 10 IntA value) and a string value named "StringA" (by default the StringA = 'abc'). In c#, if you call the method:

  var clusterA is vi (Array). GetControlValue ("ClusterA");

  you will get a table looks like: clusterA = {10, 'abc'}; So if you want to change IntA 123, you simply do:

  clusterA.SetValue (123, 0); 123 the value, 0 is the index of IntA in clusterA, after this clusterA table = {123, 'abc'}

  After that, simply to make the table in LabVIEW using:

  VI. SetControlValue ("ClusterA", clusterA);

  and now you see the LabVIEW, IntA is changed.

• How to set the voltage on a 3.3 volt NI 9237 module?

  Hello

  How to set the voltage on a 3.3 volt NI 9237 module?

  The voltage is now at 2.5 volts.

  This is my first time with this camera.

  This set of MAX or are there jumpers?

  I want the value of the excitation voltage at 3.3 Volts and do not change.

  The NI 9237 is a NEITHER cDAQ-9172.

  Thank you

  Bill

  Hi POBA,.

  This can be set to your programming environment.  For example, LabVIEW Signal Express, a task of MAX, or a DLL call in a text-based environment.  You want to create a strain, tension Custom with excitement, or any bridge based task in any environment.

  "" "In MAX, right-click on your device and choose create a task" acquire signals "analog input"...

  "" "In LabVIEW, place a DAQ Assistant" acquire signals "analog input"...

  "" "In Signal Express, add a step for Acquire" DAQmx Acquire"analog input"...

  In any C language based, you will want to call a function such as: DAQmxCreateAIVoltageChanWithExcit, DAQmxCreateAIStrainGageChan, DAQmxCreateAIBridgeChan

  You can then specify the Source of Exictation to be internal to 3.3V.

  Best,

• How to set the timeout of read when using channelReader.ReadWaveform?

  I'm using a USB-6210/a. data acquisition, and it works fine until I have to take a longer than 10 s waveform.

  When I take a longer than wave form, I get the error 200284, "some or all of the requested samples are not yet acquired.  To wait for the samples become available use longer read timeout... »

  No problem, I thought, I'll just put a longer period.  I searched through the documentation, and the timeout only I found was the watchdog timeout.  When I wanted a longer value, I get code 200452 State - specific property is not supported by the device or is not applicable to the task.

  I use the code in the example AcqVoltageSamples_IntClk.2008 .net with c# in Visual Studio 2008, .net 3.5 sp1.

  How to set the timeout so that ReadWaveform() is not the time?

  Here is the code:

  privateAnalogMultiChannelReaderchannelReader;

  privateAnalogWaveform awf;

  publicList GetWaveForm()

  {

  Try

  {

  Task getWaveform = newTask();

  getWaveform.AIChannels.CreateVoltageChannel (Channel,"", TerminalConfiguration, RangeMinimum,

  RangeMaximum, AIVoltageUnits.Volts);

  getWaveform.Timing.ConfigureSampleClock ("", SampleRate, SampleClockActiveEdge.Rising,)

  SampleQuantityMode.FiniteSamples, NumSamples);

  getWaveform.Control (TaskAction.Verify);

  channelReader = new AnalogMultiChannelReader (getWaveform.Stream);

  AnalogWaveformdata = channelReader.ReadWaveform (NumSamples);

  AWF = data [0];

  samples As new List();

  for (inti = 0; i)

  returnsamples;

  }

  catch (DaqExceptionexception)

  {

  MessageBox.Show (exception. (Message);

  }

  List of l = newList();

  return l;

  }

  Thank you

  Curt

  Hi Curt,.

  Here is a Knowledge Base that can help you to set the timeout setting in your code:

  The property using Timeout of DAQmx task in Visual Studio

• I want to know how to restore the computer to its factory settings, when I bought from a private party and have an administrators access code

  I want to know how to restore the computer to its factory settings, when I bought from a private party and have an administrators access code

  Hello

  What is the brand and model of the computer?

  The best method is to contact the computer manufacturer for help on how to set the computer to its factory settings.

  Hope this information helps.

• How to set the zoom settings menu for lecroywaverunner 6050A

  Hello

  I am trying to initialize the zoom settings of a track of the labview on a Lecroy WaveRunner 6050 A fft. I found how to set the parameters of the fft with the manual of the remote control for LeCroy scopes  http://cdn.lecroy.com/files/manuals/wm-rcm-e_rev_d.pdf ) but I have not found how to set the menu zoom settings.

  I also tried with find command using the command of automation of Lecroy. ( http://cdn.lecroy.com/files/manuals/automation_command_ref_manual_wr.pdf ). but I think that there is a problem with the settings of the commands I send to the scope.

  I just need to put the horizontal and vertical centers and scales.

  If anyone can help,

  Thank you.

  Hello

  I use F1 as my FFT here track.

  Commands to change the scales are:

  Vertical Center: VBS ' app. Math.F1.Zoom.VerCenter = XXXX"

  Portrait/div scale: VBS ' app. Math.F1.Zoom.VerScale = XXXX"

  Horizontal at the Center: VBS ' app. Math.F1.Zoom.HorCenter = XXXX"

  Horzontal scale/div: VBS ' app. Math.F1.Zoom.HorScale = XXXX"

  I also want to point you to an application on the scope that will help you.

  If you go to the file menu and select cut, to the office, there is a shortcut to an application called "XStream Browser"

  The browser is an interactive application that will present all automation methods and properties that are available on the scope.  He acually connects to the scope of the request, so you can use it to test various components to see what they do on the scope.  It is very intuitive and I use it exclusively. (this is where I went looking for the commands above for you).

  Here is a link to Chapter 1 of the manual of automation: http://cdn.lecroy.com/files/manuals/04_xstreamautomation_ch1.pdf

  Page 1 - 5 has a quick introduction to the browser and its use.

  I hope that it becomes operational.

  Kind regards

  Leonard Brown

  LeCroy sales engineer

  1-800-5LeCroy

• How to set the allocation of network by default in Vista?

  allocation network Deault in Vista

  How to set the allocation of network by default in Vista? I have two routers in wireless network, and it has stopped working. I want to get all default computers to the router to start.  Thank you

  Hello

  Are you connected to the server or if you are on a domain network?

  I suggest you follow the instructions in the link to the configuration of a default gateway on a network:

  Configuring multiple gateways on a network

  http://Windows.Microsoft.com/en-us/Windows-Vista/configuring-multiple-gateways-on-a-network

• How to set the maximum fan speed. on X230t (Windows 8)?

  How to set the maximum fan speed. on X230t (Windows 8)?

  I use TPfancontrol to set the speed of the fan in the X230t. However, this will result in excessive wear on your bearing X230t fan, which causes a premature fan failure. Is there a reason why you want to run the fan at max speed?