I want to restore the situation and modules toolbars to beta 29

Similar Questions

• I cut a record and stuck to a usb device. I want to restore the folder on my computer

  I cut a record and stuck to a usb device. When I tried to open it, he couldn't. I want to restore the folder on my computer. I know there is a way to restore your computer in the last days, but can't remember how. Does anyone know how to do this? This is a very important video of my children.

  System Restore does NOT monitor and restore user data.  You cannot use the system restore to recover a folder deleted from videos created by the user.

  What is the error message you get when you try to open the file on the USB flash drive?  Please do not paraphrase.

  What version of Windows you have, including the service pack?  Do right click my computer and select Properties, if you are not sure.

  In the future, copy and paste files to and from USB devices rather cut and paste or 'move '.  Only delete the original after that you know that the copy is used.

• computer inheirerted of father and you want to restore the factory installed vista system but do not know the password of admin fathers

  computer inheirerted of father and you want to restore the factory installed vista system but do not know the password of admin fathers

  Hello

  You should not have a password to reinstall Vista.

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I want to restore the factory setting. I press F8 and their credentials for 'user '.

  Original title: I tried to restore my computer and it shows the other user. What should I do?

  I have a windows vista Dell and I want to restore the factory setting. I press f8 when the computer starts and then I choose the repair option. After that, it shows a written page another user with two spaces a username and another for the password. I tried to write my username and leave the password blank, but it does not work. I want to know if there is another way to restore or if should I do something?

  Hello

  This is Dells use of their recovery partition information

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  For more information, contact Dell

  http://support.Dell.com/

  or try the dell support forums

  http://en.community.Dell.com/support-forums/default.aspx

• HP Pavilion dv6 Notebook PC: restore the system and drivers

  Hello. A few days ago I faced a bad experience with my laptop HP Pavilion dv6 Notebook PC. System crashed. At any time, I tried to turn it on, an error message appears and the system was blocked. The message was: FILE: \BOOT\BCD status 0xc000000f, asking for the disc of Windows 7 system running. But the system disk did not run at all. I checked the situation and found the hard drive with 6 partitions instead of 2. I found a named partition BOOT (X which was a replica of C:.)  When I tried to restore the system with the recovery disc, something has obtained control of the recovery disc, so that C: might not be formatted; nor was X:. Also, I tried to cancel the file in X: but disc was protected and does not allow changes. If only I could get my uninstalled hard drive and all partitions have been cleaned. I got my hard drive cleaned perfectly, but my recovery disk can be installed correctly. So, the system has not yet restored. My question is: what should I do to get my laptop with the system restore? any ideas?

  When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are at the bottom of your computer or inside the battery compartment. , Please do not include your serial number. Please enter the product/model information in the HP Online Support page for consumers , and/or post it here for our review.

  

  Based on the age on your computer, it could come from the factory with the scores 5 or more. It is common on newer computers that use UEFI and GPT partitions. "Windows 7 system disc", the computer asking wass is a Windows 7 repair disc or a Windows 7 installation disc. None of these discs come with your HP computer and must be downloaded or created in Windows.

   

  Start by using your HP recovery disk set (should be DVD 3 or more). Insert the #1 disc and restart your computer to start the process. Insert the remaining disks as requested, until the recovery is complete.

   

  If this does not work, and you can read the product key 25 character Microsoft Windows 7 on th COST Microsoft attached to your computer, see "How to install Windows 7 without the disc" for download Windows 7 SP1, create the Windows installation DVD and install Windows 7.  If you prefer to install Windows 7 from a USB Flash drive, please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash Drive. After the installation of Windows by using this method, you will have is more HP or software customizations. You'll also need to identify and download the drivers for hardware devices that Windows 7 does not already provide drivers for.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• The HD to SSDS: how to restore the system and all the drivers?

  Hello

  I changed the HDD with a SSD. Now I want to restore the system (Windows 8) and all the drivers and applications. To do this I use (with DVD) HP Recovery Manager and I choose to install a clean install of the system, drivers and applications. After the copy of the set in the new hd, when the computer is reset, I get the message that there is no system in my HD!
  Why? What can I do?

  Thank you

  Enter the BIOS
  Go to the tab system set
  Scroll Startup Options
  Go to boot order
  Move the current SSD as the first device by following the instructions in the right pane
  After making changes to the boot order, press F10 and click Yes to save the changes and then exit from BIOS

• I want to restore the system to the original factory State.

  I want to restore the system to the original factory State. I did a disk backup set when I bought my computer laptop hp pavillion dv6823us origin and does not matter if I try to use or to start and try F11, or work. Device Manager indicates this cd rom works and has the latest version of the driver. When try F11 after restarting, nothing on it go to the desktop. I have tried games, music CDs and other disk and I can hear it hum and flashes but used read nothing. ID appreciate any help. Running Windows Vista IE9

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

  ________________________________________________________________________

  Here are the different ways to reinstall Vista, if the recovery discs, you have done do not work

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  HP is F11

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I have windowsimagebackup folder where I want to restore the file. This is not the case in the menu catering

  I have windowsimagebackup folder where I want to restore the file. This is not the case in the menu catering

  Hello

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems, it's in here is a forum for microsoft specifically for backup issues

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• BlackBerry smartphones I want to restore the mail that is missing!

  Hello

  Help me!

  I want to restore the mail which is missing, because I did not know that after the passage of 30 days, email is eliminated.

  Are there methods to restore it?

  I use BB to the Japan.

  I visited a few special restoration contractor, but I can't find anything.

  I am involved because I wonder that there may be some methods.

  (I forgot to get back to the top)

  Hey sakimono21,

  Welcome to the community of BlackBerry Support Forums.

  Thanks for the question.

  My apologies, without a backup there will not be a way to restore e-mails.  You have e-mail messages saved on your computer or your webmail?  If you do, you can send to yourself and they will be received on the BlackBerry smartphone.

  Let me know if you have any other questions.

  See you soon.

• Satellite A80: How to restore the audio and video codecs?

  How to restore the audio and video codecs that are installed by default on my Satellite A80 with XP Home edition?
  I removed the safe mode, due to a problem with the Pinnacle Codec installed by Pinnacle Studio 10.
  Now, I need to put the video standard in audio codecs.
  I already downloaded the Microsoft Mediaplayer codec package and video sound new fr in Media Player.
  Unfortunately I have always its program to diagnose Toshiba during the test of its Midi and Wave.
  System Restore came with the message that the restoration was not possible because no changes had been made.

  Post edited by: roel

  Hello

  Try to use the tool "system restore."
  This application restores the operating system to the beginning.
  Maybe it will work.

• Why my ipod touch 5 turn on she used that happened last night I went on netflix for like 20 minutes then I closed it and then I'm gone on it again 5 minutes later, he worked later I hung on it and then I just wanted to check the time and it dint work

  I went to netflix for like 20 minutes, and then I closed and then I'm gone on it again 5 minutes later, he worked later I hung up it and then I just wanted to check the time and it dint work I can't see the screen I have tried pressing the home button and the stopcock one its does not work how to fix it

  Try:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• I want to control the speed and direction of a motor continuous using labview with pwm

  I want to control the speed and direction of a motor (essentially a toy motor) continuous generating a PWM signal in labview. I'm using L293d motor and exit DAQ-9472. Can I do this without the help of any microcontroller but only a simple labview code and the DAQ 9472 output

  There are many examples on how to generate a PWM on one in the buffer, or on a counter, but that does not support this card.  A 8 a cDAQ chassis also a BNC connector that can be used as a counter as well.  These examples can be found in help > example Finder in LabVIEW.

  Also be aware of your current limiting.  This card can drive a decent amount of current, but it has its limits.  You'll want to put an inline meter to see what is current and see how far you get to it.

• My pcg-7a2l is very slow. I want to spend the cpu and ram. What is the cpu socket and the ram need me it?

  My pcg-7a2l is very slow. I want to spend the cpu and ram. What is the cpu socket and the ram need me it?

  Hello

  PCG-7A2L is the configuration of the equipment donated by Sony code. Try to find the model # begins with "VGNFS6". Check the following link to locate the model #:

  http://eSupport.Sony.com/us/p/support-info.pl?info_id=264

  The option to upgrade the processor is not available. However, you can check if the RAM can be improved. Enter the model # below for specifications of Marketing:

  http://eSupport.Sony.com/us/p/select-System.pl?Director=docs

  Try the procedure described on the following link to resolve problems when the computer is running slowly:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/39709/c/65, kw/66/39709

  If my post answered your question, please mark it as an "accepted Solution".

• Is there a process or program that I can use to restore the system and configuration of the system to the original

  Hello

  I would like to know if there is a microsoft tool or a suggested list of Microsoft that could help me restore the system and the system configuration files in the appropriate State. is not the restoration of the system. I don't know of retoring my computer to an earlier time, nor on the restoration of computer purchase. 

  I thought that my computer has been compromised in some way, and the intruder was accessing my unit via some sort of connection distance.

  I received the support of the malicious software company, and I think that my computer is fine now.

  And so the question with which I opened this post: I would like to know if there is a Microsoft tool or a suggested list of Microsoft that would help me to restore the system and the system configuration files in the appropriate State. I'm not taling about system restore. I speak not of retoring my computer to an earlier time.

  Whenever I start to notice the strange behaviour of my computer, I would like to launch this program and follow this procedure to reset all the settings and files to a suitable State. The reason why run alone to detect malware problems, and that if there is remote access to my computer inadvertently, the intruder can do a lot of editing of files which is not identified by the malware. and I believe that if I was able to run a program like this, all the changes took place, which expose my device, but the rules of behavior systems can be reversed for a proper state.

  I read an article on how to repair my operating system, but it forced me to get a copy of it; However, given that the supplied operating system with preinstalled on this computer, I could not follow the instructions. Article I read to all system and configuration files that meet the standards of the manufacturer, without losing files and installed programs.

  Thank you

  Hello

  Already, you mention that you can do; either a repair installation.

  "How to do a repair installation to repair Windows 7"
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  And make sure that read you all the information under 'warning'.

  It also tells you what drives you can and cannot use to do.

  ________________________________________________

  You can use this to fix the corrupted system files.

  "Command SFC/scannow - System File Checker.

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  «Use the System File Checker tool to repair missing or corrupted system files»

  http://support.Microsoft.com/kb/929833/en-us

  But if SFC detect serious errors in the file system, you may need to do a repair installation as in the instructions in the first part of this answer.

  See you soon.

• I want to congratulate the subscription and delete the auto-renewal, how do?

  I want to congratulate the subscription and delete the auto-renewal, how do?

  To cancel the https://helpx.adobe.com/creative-cloud/help/cancel-membership.html

  - or answer #1 in https://forums.adobe.com/thread/2023066 - includes a link to Chat from Monday to Friday