I would like my firefox to its original state, as I can in windows. I use a Mac

Similar Questions

• None of my work.imtrying of tools windows vista to restore my comp.to than its original state, but I can't find to open all the tools like system restore, disk cleanup, difragment, etc...

  When I turn my comp.on it gives me all sorts of messages cannot find shortcut to file.it is unable to deal with a problem.

  When I turn my comp.on it gives me all sorts of messages cannot find shortcut to file.it is unable to deal with a problem.

  Hé el24

  you do not etc system restore disk cleanup to put your computer to the standards of the factory how you bought it if that's what you hear

  Contact your computer manufacturer and ask them to send you a set of vista recovery discs and also ask them if you have a vista recovery partition on your hard drive to reinstall vista back to factory standards

  you will normally need to press F10 or F11 at startup to start the recovery process vista back to factory standards

  Ask them the sequence of keys to use to start the process from the recovery partition

  If in your question that you mean how do you do maintenance work on your existing operating system, please let us know

  Walter, the time zone traveller

• I have photoshop on my powerbook, but would like to transfer to my macbook air.  Where can I download the installation of.  I don't have the original installation.

  I have photoshop on my powerbook, but would like to transfer to my macbook air.  Where can I download the installation of.  I don't have the original installation.

  CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html

  CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  CS5.5 - http://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

• Would like clarification on return to original image of snapshots

  I think I found my answer in another post but want to confirm, we run VMware ESX 4.x in our dev environment and I have tried using snapshots as a Setup program is being tested - so we can return to a clean server, because scripts are modified and tested.

  It's been my entry to the former post I replied to my question.

  Legacy post of 2007: http://communities.vmware.com/thread/106743?tstart=0

  "I realize that this is an old NET and will create a link to it - but just in case where any follow-up on this issue.

  After having problems with "outdated" instant in the past, I stopped using them, but I started using them again for an ongoing project, and some encouragement from another group.

  This thread was very useful to diagnose the problem we take - I used 'Delete' tried to return to the original image and our developer said he had files from earlier in the day and the event log was entered prior to the current installation process.

  If this post is correct, then 'Remove' merges all the data in the previous snapshot or V-disc - would appreciate a clear explanation on how it works and what is needed to delete all snapshots, leaving the base VM in its original state Victorinox. »

  ' Go to ' should be explicit enough already, although I can understand how some can be confused with the option 'delete '.

  First, it is important to understand the functioning of the snapshots. New to virtualization assumes that there is a kind of copy but this isn't how it works. When you create a snapshot, it only creates a new file of virtual disk of delta containing only the changes since the snapshot was created. The original vmdk file will be marked read-only, and all entries will go to your delta file.

  As you the thought, "Deleting" a snapshot with VMware terms delta is merged into the original vmdk and you will not be able to return to the previous state more.

  ' Go to ' or 'come back' will change to the selected state when a snapshot was created. This also effectively "removes" or rather ignores the current delta running, then you will not be able to re - return to this new State unless you create another cliché. Instead a new empty delta is created with the ignition and filled with subsequent changes. So that means also means your snapshot is not "removed" when you come back, as it will just start from 0.

  These articles explain everything you need to know around snapshots:

  http://KB.VMware.com/kb/1015180

  http://KB.VMware.com/kb/1009402

• my cursor floating to and disrupt the layout, how can I restore my computer to its original state

  my cursor keeps floating offshore on its own and changed the fonts on my computer and do not know how to restore it to its original state

  Hello JeanSteel,

  I suggest try to perform a system restore to a time before having this problem.  If you want to restore your computer to factory settings, I would suggest contacting the manufacturer on the guidelines for this.  Also, be sure to back up your data before doing this.  Here is a link to perform a system restore.  Please let us know status.

  System Restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Thank you

• I will be visiting China and want to download movies to watch on the plane of Air China. I would like to download to a memory stick, so I can play the movies via my Kingston 5 in 1 for my Ipad.

  I will be visiting China and want to download movies to watch on the plane of Air China. I would like to download to a memory stick, so I can play the movies via my Kingston 5 in 1 for my Ipad.

  Chances are that will not work.

  First of all, your movies will have DRM on them which prohibit generally just put the files anywhere. And, unfortunately, most of the USB drives do not work plugged into the iPad. Most triggers a warning 'unit wants too much power. and if they don't 'make the files on the disk must be formatted to imitate a card camera to mainly use the photos app to "fool" the iPad by seeing the files. (in a folder called DCIM and with file names exactly 8 characters)

  If you are unable to get this to work, you can't watch off the stick (personally if you try I would try a SD card with the card camera adapter). You must import the file on the iPad and then watch it and delete it.

  That works for homemade video files, however rented downloaded movies usually have digital rights management on them that ban you placed on a file or reading them.

  There are devices like the Kingston WiDrive, which makes a localized wifi hotspot you connect your iPad to then disseminate content from there. However, it takes some experience since you can have the technology part down but may or may not be able to move the files. (I only download content from itunes so I can't say for sure if it works or not)

• have xp backup file of the old pc would like to put on new pc with vista, how can I do?

  have xp backup file of the old pc would like to put on new pc with vista, how can I do?

  Vista backup and restore tools are distinguished by the backup program provided with Windows XP and if the backup files would be incompatible.

  Perhaps you should look at is:

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-transferring-files-and-settings-from-another-computer
  You can transfer files and settings from one Windows computer to another by using a calledWindows Easy Transfer tool. To use this tool, your computer must be runningWindows 2000, Windows XP or Windows Vista, and your new computer must be Vista runningWindows.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• I would like to ask what is the official number of built for windows 7 tnx

  I would like to ask what is the official number of built for windows 7 tnx

  Hello Goka86, this is 7600. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Need instructions on how to use the recovery Partition to restore my OS to its original state.

  I need to use the recovery partition to restore my OS to its original state.  I'm getting crashes (invaded by "dumprep.exe" CPU cycles) and an occasional BSOD.

  What brand is your computer?  Some computer manufacturers, including Dell and HP, have a recovery partition on the hard drive of the new computers.  By pressing a special key combination when the computer starts, you can use the recovery partition to restore the computer to the way it was when it was new.  Looking for a message about the recovery options on the first screen that appears.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Key board: I would like to configure my f - keys as if they were in Windows Xp, can anyone help me please?

  I would like to configure my f - keys as if they were in Windows Xp, can anyone help me please?

  Sunday, August 1, 2010 14:34:08 + 0000, eusbee wrote:

  I would like to configure my f - keys as if they were in Windows Xp, can anyone help me please?

  I recommend that you download and install the small, simple, easy
  to use, free program called SharpKeys to
  http://www.randyrants.com/SharpKeys/

  Allows you to remap the keys as you wish. For example, I use it personally
  to turn off the CapsLock and Insert keys, two keys that I never want to
  to use, but I'm inclined to hit accidentally.

  Ken Blake

• How to bring back the .dll files to its original state?

  Hey there's good people!

  Today by chance I opened a DLL with notepad now all my files are changed in the Notepad file. How can I get my dll file returns to its original state on how it was before? Where I could see the two bolts of small image on each dll file?

  Thank you very much!!

  0ne love

  Vally Pally

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• I would like to set up an email accout w / you. can I use a pop3 server, or you can tell me how?

  I would like to set up an e-mail w / you. can I use a pop3 service or you tell me how?

  E-mail account:

   

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• I would like to know if there is any way I can remove the 32-bit and keep the 64-bit without harming my computer

  I ran windows 7 installation on my computer using DVD who had 32 and 64-bit data and for that I currently have 32-bit and 64-bit installed in my computer. So I would like to know if there is any way I can remove the 32 bit and keep the 64 bits without harming my computer or stored data because now both bits is eating space on my C drive/partition!

  OT:

  Windows

  Why do you think you have "32-bit and 64-bit" versions of Windows 7 installed?

  If you installed the 64-bit version (which you will need if your computer has more than 4 GB of RAM and you want to use all of this RAM), you can see a few references to 32-bit architecture.  The 64 bit version of Windows needs these files in order to run software that is designed for 32-bit architecture.

  Perhaps the most obvious instance is the presence of the following two directories:

  C:\Program Files and C:\Program Files (x 86).  It is normal for both of these directories present in a 64-bit system.

  Maybe this will help--> 32-bit and 64-bit Windows: frequently asked questions

• I would like to determine the levels of ink a printer 6122 with windows 7.

  I would like to determine the levels of ink a printer 6122 with windows 7. Attempt to use the abortd installation CD with the message "bad BONES". I installed the driver 990c work around according to the instructions from HP. It is another way to get the utility package that came on the 6122 install CD?

  Printing and scanning Dr. may not be able to detect if ink cartridges are not HP, HP inks no ink installed? You can try cleaning the contacts on the cartridges and power in cycling of the printer.

  To clean the contacts, you can reference this document from HP: print cartridge error.

• Factory reset for Windows 7 will restore my BIOS too to its original state when I bought it?

  I now use Windows 8, I bought my laptop in JULY 2012. It came with Windows Home Premium and I have the recovery disc for Windows 7. I intend to factory reset my laptop because of my disappointment with Windows 8 and supprt for Windows 8.

  I want to know if the "factory Reset" will restore the BIOS of the laptop in its original state. I mean I have my BIOS set to update to the latest. I want to return to its former State. How long is the factory reset also takes? I own edition HP DV6T Quad 7000 with 32 GB WSSD.

  Intel RST does not have anything, my HARD drive is shown in non-RAID and there is no way I can change it to RAID. My last option is to try the Factory Reset and see if it helps. I'm sure that TSRI will work if my BIOS is restored to the original condition with everything so it starts to detect my HDD in RAID.

  Hello

  A factory image recovery will not affect the version of BIOS or current settings. The duration during which the factory image recovery takes wil depend on what type of recovery media that you have. If you have a usb recovery media that it will probably wait maybe thiry minutes. Use you a recovery value disk while recovery might take a few hours to complete.

  Once you start the recovery not to touch the keyboard.

  Make sure that the wireless is turned on before commit you to the recovery.

  Best regards

  ERICO