IAsset Page error when submitting create the transfer request

Similar Questions

• "Cannot display Page" error when you click the Remote Agent

  Hello world! ACS SE 4.0, we have installed and we have added a remote agent running on Windows Server 2003. Recently, we encounter "Cannot display the page" error when we click on the RA under a group of network devices. It's resolved by restarting the device SE ACS and access the web console for ACS still once, but after a few hours, the problem reoccur. By clicking on the links on the web console for ACS is OK at first, but after clicking on the RA, each link displays the error "Unable to display the page." Hope you could help me with this problem. Any person support is much appreciated.

  Thank you!

  Hi Jas,

  Here is the bug CSCsg40444.

  Kind regards

  ~ JG

  Note the useful messages

• Get rid of Web page errors when connecting to the webvpn

  It's on an ASA5505

  I have a question about the resolution of errors in the web browser when you try to access my vpn ssl interface to download Anyconnect.

  I use self-signed certificates.

  The webvpn page that will allow users to connect to get the anyconnect client.

  For webvpn page I do not use a domain name FULL only her public IP address of the external interface.

  For example, I want the clients to connect to https://x.x.x.x/AnyConnectVPN and get the anyconnect client. They will receive the webbrowser error, noting that the certificate is not approved. After that install the cert to the root that goes now, I'm trying to keep from getting the error "The URL that you use to access the site does not match the name in the certificate."

  Can I specify the exact page I want vpn users to enter the name of the object CN?

  Crypto ca trustpoint Identity_Certificate

  LOCAL-CA-SERVER key pair

  ID-use ssl-ipsec

  no name FQDN

  name of the CN=x.x.x.x/AnyConnectVPNobject, OR IT_Dept, O is is BUSINESS of TEST, C = US, St = FL, L = Daytona[email protected] / * /

  Thanks for the help.

  Triton

  The trustpoint you created needs to have the subject name of "CN = x.x.x.x", you do not need to include the "/ AnyConnectVPN".

  Hope that helps.

• "Cannot open this page" error when connecting to the Internet.

  Original title: I can connect to my server, but IE cannot get me on the internet

  My wifes laptop shows live wireless to our BT Homehub (my laptop, iPhone etc is it ok too) but tries to connect to the internet, it gets a "cannot open this page" dialog

  Hello

  1 are there any changes or updates made on the computer?

  2. when exactly you get the error message?

  3. the problem only occurs in Internet Explorer?

  Method 1:

  I suggest you to return the item and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Method 2:

  If the problem only occurs with Internet Explorer, I suggest to optimize and to check if it helps.

  http://support.Microsoft.com/kb/936213/ro

  Note: "Please note that the reset Internet Explorer (IE) resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords. »

• Build error when you create the Provisioning package picture

  Hi all

  I'm trying to create a master Windows IOT image by using the tool of IDC (imaging and designer of Configuration).

  I created a package of commissioning and using"customization of the Windows Image" to create a kernel ITO image by specifying the configuration previously created package but still get a build error.

  It looks like a fairly simple process, but repeatedly gives the error below. Also, I have not all USB devices connected to the computer, nor are there insufficient memory problems.

  ERROR

  =====

  Progress of the staging: 75%
  Staging failed to: 75% complete
  UpdateDLL: Measurement of results:
  Staging of total time: seconds = 27 (tickcount = 27235)
  Error: imagery! UpdateImage: Failed call to UpdateDLL::PrepareUpdate with the error code:-2145877241 (0 x 80188307)
  DismountVirtualHardDiskByFileName: disassembly image C:\Users\Shridhar\AppData\Local\Temp\8eceab63e9b746c0a9c65848679d56eb.vhd
  DismountFullFlashImage: [0.219] cleanup of temporary access roads.
  CleanupTemporaryPaths: Cleaning of temporary path C:\Users\Shridhar\AppData\Local\Temp\IMG39F3.tmp\.
  Storage service: disassembly of the image in 0.2 seconds.
  Imaging: See Flash.cbs.log and Flash.csi.log for more details.
  Imaging: Performance results:
  Total running time: 00:00:52.7198674
  Time of image creation: 00:00:00.0642425
  Writing FFU Time: 00:00:00
  Battery storage time: 00:00:17.8667874

  Any help would be greatly appreciated.

  Hello

  Your question is beyond the scope of this community...

  Repost in the TechNet Forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  Or MSDN Forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• I get this error when submitting the question to DPS

  Hi uses Woodwing Enterprise to publish fact sheets on the DPS from Adobe and it was okay, I ended up creating a new show and I get this error when submitting the question to DPS: Adobe Distibution Server returned the error when calling "createIssue. Code HTTP: 401. HTTP message. "Unknown error.". Results Adobe message: "unauthorized access. Check the logs for more details". Adobe results status: "Not ALLOWED." The DPS account has been recently renewed

  Please contact the support gold on this problem.

• My Readyboost does not work. When I click on dedicate to Readyboost, it gives me an error: failed to create the cache.

  ReadyBoost - Cache problem!

  My Readyboost does not work.  When I click on dedicate to Readyboost, it gives me an error: failed to create the cache.  The process cannot access the file because it is being used by another process.  Help!

  Hello

  Did you change your computer?

  (a) click on the 'Start' button, then click on 'computer '.

  (b) right click on the USB drive or flash memory card that uses Windows Ready Boost, then click 'properties '.

  (c) click on the tab "Ready Boost" in the 'Properties' window to the memory card or the USB drive.

  (d) select the title radio button "do not use this device ' then click on 'OK '. This step should remove automatically the Ready Boost cache on the device. If you are unable to use the full capacity of the device, proceed to the next step.

  (e) double-click the memory card or the USB drive.

  (f) right click on the file 'ReadyBoost.sfcache' and then click 'remove '.

  (g) click 'Yes' to remove the ReadyBoost cache.

  Reconnect the device ready boost which allows the service to boost loan which will create the new cache.

  I suggest you to follow the links and check out them.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Turn ReadyBoost on or off for a storage device

  http://Windows.Microsoft.com/en-us/Windows7/turn-ReadyBoost-on-or-off-for-a-storage-device

  Using memory in your storage device to speed up your computer

  http://Windows.Microsoft.com/en-us/Windows7/using-memory-in-your-storage-device-to-speed-up-your-computer

• My contact form is saying "the server has encountered an error" when submitted

  My contact form is saying "the server has encountered an error" when submitted. It has worked very well and I use the same form on another site that works well. Can anyone help? The website link is: http://www.lifeclinics.com/contact-us.html

  Hello

  Please check the following threads,

  The server encounters an error, don't know what to do

  Detailed Contact form error

  Let me know if you have any question.

• Java with Minecraft error "error: could not create the Virtual Machine Java.»

  When I try to open Minecraft SP, it won't let me open and there is a message saying:

  "Error: could not create the Virtual Machine Java.".
  Error: A fatal error has occurred. Program will exit. »
  How can I solve this problem?

  Hello

  What is the operating system installed on your computer?
   
  You can ask your question on the Minecraft forums for assistance. Check out the following link.
  http://www.minecraftforum.NET/viewforum.php?f=1002

• Empty Device Manager and for error message "cannot create the enumerated device root need to install Parallels paravirtualization pilot".

  Original title: Device Manager empty

  I have Windows XP Service Pack 3 installed in a Bootcamp partition on my Intel iMac. I can detect and install new hardware such as USB keys. However, the Device Manager window is blank - how can I get the window to display the devices connected to the computer? I am also unable to install Parallels tools when I use Bootcamp as a virtual machine. The error message "cannot create the 'root-enumerated device' necessary to install Parallels Paravirualization driver.

  Hey Harcjk,

  For your first question, go through this article.

  None of the items appear in the device list manager when you open
  http://support.Microsoft.com/kb/311504

  For the second question, here are some suggestions:

  Method 1: Uninstall & install Parallels tools

   

  NOTE: we highly recommend you make a backup of the virtual machine before you continue.

  a. start your virtual machine and cancel the installation of Parallels Tools Wizard.

  b. Click Start--> Panel--> Add / Remove programs and remove the Parallels tools in the list of applications.

  c. restart Windows.

  d. install the Parallels tools by clicking on the Virtual Machine--> install the Parallels Tools.

  Method 2: Uninstall antivirus software

  If the problem persists, try the following:

  Temporarily uninstall all the antivirus software to the virtual machine and repeat steps of the "Uninstall & install Parallels Tools" section above.

  Note: Don't forget to install the back antivirus software, once the problem is resolved.

   

  Method 3: Uninstall, clean & install Parallels tools

   

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

   

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  a. If the problem persists, try the following:

  b. start Windows.

  c. go to "Start" > "Control Panel" > "Add/Remove Programs" and uninstall theParallels Tools if it is present.

  d. go to 'my computer' > 'C' drive > "Program Files" > "Parallels" folder and delete the "Parallels Tools" folder, if present.

  e. click the Windows 'Start' menu-> 'run' and type 'regedit'. Click OK.

  f. in the registry editor, go to "My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Parallels" and delete the heading "Parallels Tools" and go to "My Computer\HKEY_CURRENT_USER\SOFTWARE\Parallels" and remove the 'Tools' section.

  g. restart Windows.

  h. now install Parallels tools in the 'VM' menu on the Parallels Desktop menu bar, while Windows is running.

  I hope this helps.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After that the effects cannot continue: error when access to the files instead of inside "/ users/dsvp/Library/Preferences/Adobe/After Effects / 13.8.

  After Effects after several months, I now can't launch After Effects without this error: After Effects can't continue: error when access to the files instead of inside "/ users/dsvp/Library/Preferences/Adobe/After Effects / 13.8.  There is no subfolder this Library which is the first obvious sign of something not going.  I've uninstalled and reinstalled twice with the same error and lack of file structure.  I do not understand why a re - install does not create the files and folders needed.

  reset your preferences - http://helpx.adobe.com/after-effects/using/preferences.html

  [moved from the installation, update, & members of Acrobat After Effects]

• Re: "insufficient privileges" error when you run the Java stored procedure in another schema

  I get an "insufficient privileges" error when you run the Java stored procedure in another schema, see details below.  I don't know what are missing privileges (I already granted the EXECUTE privilege), suggestions?  -Thank you.

  Define a simple java class and deploy it as a Java stored procedure to test:

  
  

  Schema: User1

  test of the package;

  public class HelloWorld {}

  public HelloWorld() {

  Super();

  }

  public static String Hello () {}

  Return "HELLO";

  }

  }

  CREATE or REPLACE FUNCTION HELLO RETURN VARCHAR2 AUTHID CURRENT_USER AS LANGUAGE JAVA NAME ' test. HelloWorld.hello () return java.lang.String';

  Grant execute on USER2 HELLO

  Test the Java stored procedure through the PL/SQL function call (in the same schema):

  
  

  Schema: User1

  SET SERVEROUTPUT ON

  DECLARE

  v_Return VARCHAR2 (200);

  BEGIN

  v_Return: = User1. HELLO;

  DBMS_OUTPUT. Put_line ('v_Return =' | v_Return);

  END;

  anonymous block filled

  v_Return = HELLO

  Test the Java stored procedure through the PL/SQL function call in a different pattern:

  
  

  Schema: USER2

  SET SERVEROUTPUT ON

  DECLARE

  v_Return VARCHAR2 (200);

  BEGIN

  v_Return: = User1. HELLO;

  DBMS_OUTPUT. Put_line ('v_Return =' | v_Return);

  END;

  Error report-

  ORA-01031: insufficient privileges

  ORA-06512: at "User1." HELLO', line 1

  ORA-06512: at line 4 level

  01031 00000 - "insufficient privileges".

  * Cause: An attempt was made to change the user name or password

  without the privilege appropriate. This error also occurs if

  trying to install a database without the need for employment

  access privileges.

  When Trusted Oracle is configure in DBMS MAC, this error may occur

  If the user has been granted the privilege necessary for a higher label

  that the connection is active.

  * Action: Ask the database to perform the operation or grant administrator

  the required privileges.

  For users Trusted Oracle get this error, well that granted the

  the privilege that is suitable for the top label, ask the database

  administrator to grant the privilege to the appropriate label.

  You have created the function with AUTHID CURRENT_USER, which means that the function is executed with the rights of the applicant (but not with the rights of the author). This means that the applicant must have grants (directly or through roles) on all used/accessible objects in the service. In your case the user USER2 has not granted with EXECUTE on the class/source Java test. Class HelloWorld, causing the ORA-01031 exception. You create service without AUTHID CURRENT_USER (i.e. with AUTHID DEFINE, which is by default, if you do not have a specific reason to use AUTHID CURRENT_USER) or grant EXECUTE on JAVA test SOURCE. Class HelloWorld to User2.

  Dimitar

• Stage of JavaFX Builder 1.0 error: could not create the Virtual Machine Java.

  Hello
  I have installed JavaFX scene Builder under Windows 7 x 32. The installation process is OK, but when I try to launch the app it crashes and displays an error that says:
  "Error: could not create the Virtual Machine Java.".
  Error: A fatal error has occurred. Program will exit. »
  
  I installed JVM 7u5, JDK 7u5, JavaFX SDK 2.1.1 JavaFX 2.1.1 (Java EE JDK + Glassfish) I would be grateful if someone could tell me if there is something missing. I reinstalled almost all software java several times, but without success.
  
  Kind regards!
  
  Published by: 942925 on June 26, 2012 10:23

  Hello

  This message appears usually when the JVM cannot allocate sufficient memory. It may be the consequence of the stage Builder set - Xmx1024m command line: this is currently followed by default TLD-4515 and will be fixed in the next few weeks.
  For the time being you can give a try on a system with more memory. Moreover, what is your current hardware configuration?
  Concerning

• R12 rapidwiz error on node2 - AC-00002: error: unable to create the log file

  Over multiple node R12 on Enterprise Linux 4 installation fees. below error is encountered on node2
  
  AC-00002: error: unable to create the log file
  The installation was successful on the database node and the main node of the Application. On the primary Application node only ' lot
  
  Treatment services are enabled.
  
  However, when installing on the application additional node the rapidwiz is errors
  
  "AC-00002: error: unable to create the log file - $INST_TOP/$CONTEXT_NAME/logs/12202114.log.
  Exception in thread "AWT-EventQueue-0" java.lang.RuntimeException: AC-00002: unable to create the log file.
  $INST_TOP/$CONTEXT_NAME/logs/12202114.log
  
  I tried to install several times but every time it failed with the same message
  
  I think that the reason for the failure:
  
  I am writing on a mounted NFS on Node2. If I access a NFS mount from one server other than of its origin, the root of the application server user is considered person not the user.
  I checked this by pressing a file being logged in as root:
  
  -rw - r - r - 1 person person 0 20 Dec 10:59 abc
  
  I mounted node2 successfully using
  Mount-t nfs nas1: / erparch /erparch
  
  Rapidwiz version is 12.0.0.20
  
  What are the steps to take in order to proceed with the installation on the second node.

  user10126380 wrote:
  I think that the reason for the failure:

  I am writing on a mounted NFS on Node2. If I access a NFS mount from one server other than of its origin, the root of the application server user is considered person not the user.
  I checked this by pressing a file being logged in as root:

  -rw - r - r - 1 person person 0 20 Dec 10:59 abc

  I think you've correctly identified the source of your problem. By default, the NFS mounts are usually created with the 'root_squash' option, where the user root on a remote system creates its files as the anonymous user ('nobody' in most cases) on the exported NFS volume. It is usually a good practical security; However, in your case, you need to export the NFS volume with no_root_squash to allow the user root on Node2 to create files as expected when you run RapidWiz. Once installation is complete, you should be able to go back to using the default root_squash option, as the following files in the filesystem level of demand will be created by non-root users.

  Your system administrators may not be happy with the idea of an export of no_root_squash, and I wouldn't blame them. :-) If there is dispute, make sure that they understand that it is only for the duration of the installation of the EBS, and she can (and should) be powered once the installation is complete and verified to work.

  These two articles offer a brief explanation of the purpose and value of the NFS mount root_squash/no_root_squash export options.

  Kind regards

  John P.
  http://only4left.jpiwowar.com

  Published by: jpiwowar on December 21, 2009 21:38

• I am now on iOS 9.2 Game Center still does not work. When I open the app it freezes on a blank page. When I open the Game Center in the settings, it freezes and then crashes. Please Apple can solve this problem of Game Center iOS 9.2.

  I am on iOS 9.2 and Game Center still does not work. When I open the app it freezes on a blank page. When I open the Game Center in the Middle it hangs just. For this reason, I can't back up my data on my games. Please Apple can solve this problem of iOS 9.2.

  Hello Vaishnav,

  Thank you for using communities of Apple Support.

  I see that you are having problems with Game Center on your iPhone. I have a number of things for you to try.

  First force quit Game Center.

  1. Press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. Swipe to the left to find the Game Center app to close.
  3. Swipe up on the preview of the Game Center to close.

  Force an app to close the iOS

  If this does not work, then the next step would be a restoration. I recommend restore like new, without backup restore and everything first. If it works there, you can restore the backup.

  Use iTunes to restore your iPhone, iPad or iPod to factory settings

  Best regards.