Identify the Drag and Drop drag Source

Similar Questions

• Drag and Drop Hide Source of success

  Hi, I created a multiple source target Drag and Drop Interaction.

  It works great except for advanced behavior, I want to take place.

  I want to give the impression that my source objects 'disappear' (hide) after I drag them successfully to the right target; How can I go about it?

  Several possibilities. Select the target object, and you will see the options for snapping behavior in the D & D Panel. You can reduce the drag source objects by changing the size, you can make their get Alpha to 0% to make them transparent, or you can let them disappear behind, by choosing back instead of the Front. Look at this screenshot, I indicated the three places, but it is not defined on 0% transparency or very small.

  

  You don't say what should happen with the non-correct do drag sources? You should have them abruptly back and forth, by editing the sources accepted in the Actions of the object that you can open from the same place for each target dialog.

• In the absence of a Drag and Drmove to a specific target, I want the Drag object to return to the drag source, so that the user can try again drag

  I have a matrix 7 X 5 simple grid where I want my users to drag one of the 35 boxes to slide into the correct location about to slip 1 matrix instead of 1 drop. If the user has not abandoned on the right Drop target. The system needs to undo the move to allow the user to try again. What are the properties for the characteristics of failure I have to ensure that this happens.

  You will need for each target to open the object Actions (under the tab Format CP8) dialog box, uncheck the accept all and indicate that only the good drag source.

• Problems with the list of the button and drop-down list

  Hello
  
  I want my users to view revenue by country or city...
  
  to select country I use a "list of the button' and for the city I'm on a 'combo '... When my select user a country, the cities of filtered accordingly... everything works fine, except the following (it is in step 3):
  
  Step 1. When I select a country (let's say canada) report gives me an appropriate set of data...
  Step 2. When I filter in a city (let's say Toronto) everyting works very well according to the filter...
  Step 3. When I select another country (let's say the USA), I get no data displayed on my report but good news, it's that my drop down the city will update accordingly
  Step 4. to get the required data, I have to change city (let's say Chicago)...
  
  
  what I want is that when my user select another country (step 3)... then the report should display data for all cities and I used the logical
  
  Select rev table_country
  where
  (b.City =
  CASE
  When: P49_CITY = 'ALL' THEN b.City
  OTHERWISE: P49_CITY END)
  
  somehow, I want the P49_CITY to 'ALL' value when the user selects a country
  
  Please advice

  Hello

  This is the way of simply to do.

  1 make the country select list (P49_COUNTRY) a select list with submit
  2. create a conditional branch that dates back to the 49 Page
  3 do the conditional branch of type PL/SQL Expression. In the expression 1 enter

  :REQUEST = 'P49_COUNTRY';
  

  4. in the value of these items , enter P49_CITY and let these values in white.

  So when the country is changed the page will be submitted, take over the management of the status of the page and in the process put the city at null.

  Kind regards

• How to identify the client and server versions

  Hi all
  
  OK, this may sound silly, but I have to write an application to access an Oracle database. Prior development in other languages used ODBC and works very well. VS.NET using OLE DB works as well.
  
  However, I installed ODT with ODAC 11.10.6.21 and tried. I get an error while trying to access the data.
  
  When I run the conn.open (), I get:
  ORA-12154: TNS: could not resolve the connect identifier specified
  
  I opened the TNSNames.ora file and allows to create the just in case connection string. But I still get the error.
  
  My guess is that the client on my system is too old, or maybe the Oracle server still running an older version.
  
  Is there an easy way for me to identify the latest version of the client and the version of Oracle running on the server, I installed?
  
  No, I can't just ask the people who manage the server or I would have done it already. I am a contractor here and it is very difficult for me to get through to those who know it.
  
  Thank you
  
  JustMe

  http://www.Oracle.com/technology/tech/dotnet/Col/odt_faq.html#ora-12154:_TNS:could_not_resolve_the

• A driver for my CD drive has been disabled. How to identify the driver and solve the problem?

  Lately, I have not been able to use my CD-ROM drive. When I put a disc in, the player starts to turn, but Windows does not recognize the disc. When I navigate to the CD-ROM drive in the Explorer, a message appears telling me "Please insert a disk into drive D:." When I look at the properties of the device, I get the following device status:

  A driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32)

  Click Troubleshoot to start the troubleshooter for this device.

  Trouble shooting steps me to uninstall and reinstall the device, but this has no effect - the drive still does not work.

  I am running Windows XP Professional. My CD drive is a LG CRD - 8482B CD-ROM. The driver files are:

  CDROM.sys
  GEARAspiWDM.sys
  IMAPI.sys
  PxHelp20.sys
  Redbook.sys
  c:\windows\system32\storprop.dll

  Does anyone have a solution?

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• When I try to import new files from an SD card, I get an error message.  The message reads: "If there is already a file in: / Users/student/movies / '.  I want to be able to drag and drop the files, by clicking on the SD icon on the desktop and drop it in

  When I try to import new files from an SD card, I get an error message.  The message reads: "If there is already a file in: / Useres/student/movies / '.  I want to be able to slide the SD card on my desktop icon in the quick editing workspace and select the files I need to change.  Thank you!

  You are on a network in a school? If there might be one video files with the same name already exists in this folder.

  Try to get the video files using add media videos from camcorders or cameras and by accessing the camera or the card reader by using the video importer. In the video importer, you can set the custom file name and rename your files so that they will not have the same names as existing files.

• Identify the weekend and the days of the week a date and update the empty column

  Hi, I look at previous posts that are similar to my question, but nothing helps.
  
  I have a column called incident_date that is in this format and comes from the Nov_Final table
  

  01-JUL-2009 20.10
  04-NOV-2009 17.00
  16-DEC-2009 16.00

  In Nov_Final, I created a column called weekend
  
  What I want to do is to perform an update, something like this:
  

  Update Nov_Final
  
  SET Weekend=(case when Incident_date ='WEEKEND' THEN 'Y' ELSE 'N' END)

  Banner:
  Oracle Database 11 g Release 11.2.0.2.0 - 64 bit Production
  PL/SQL Release 11.2.0.2.0 - Production
  "CORE 11.2.0.2.0 Production."
  AMT for Linux: Version 11.2.0.2.0 - Production
  NLSRTL Version 11.2.0.2.0 - Production
  

  Weekend would be Saturday or Sunday. 
  In short I need to find out if the incident_date falls on a weekend and if it does update the weekend column as 'Y' else 'N' if it's not.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            

  You can use TO_CHAR function with a format mask as "fmDAY" to your needs:

  with t_data
  as
  (
  select sysdate + level as col1 from dual connect by level <= 7
  )
  SELECT
      col1,
      TO_CHAR(col1,'fmDAY') col_day,
      CASE
          WHEN TO_CHAR(col1,'fmDAY') IN ('SATURDAY','SUNDAY')
          THEN 'Y'
          ELSE 'N'
      END AS weekend_ind
  FROM
      t_data;
  
  COL1                      COL_DAY                     WEEKEND_IND
  ------------------------- --------------------------- -----------
  08-NOV-11 07:54:12        TUESDAY                     N
  09-NOV-11 07:54:12        WEDNESDAY                   N
  10-NOV-11 07:54:12        THURSDAY                    N
  11-NOV-11 07:54:12        FRIDAY                      N
  12-NOV-11 07:54:12        SATURDAY                    Y
  13-NOV-11 07:54:12        SUNDAY                      Y
  14-NOV-11 07:54:12        MONDAY                      N           
  
  7 rows selected
  

• 8 - Drag and Drop - Bounce Back answers that are out of sequence of Captivate

  Sorry if it's addressed somewhere, but my search results find anything. I'm building a drag and drop in which objects should be waived in order in various targets. I can get an object of bounce if it fell in the wrong place, but I also want the object to bounce back if it broke down (in the wrong order). For example, if point 2 fell in the right place, but in the wrong order, it will be returned. But I can't find an option for that. Any ideas? Thank you!

  I don't think there's a way to get there. Only drag sources that cannot be accepted by a drop target can be bounced. But with the sequence, the drag source must be accepted even if it is not in the correct order.

• Drag and drop custom actions - 8 Captivate

  Good afternoon!

  I created a drag drop in 8 Captivate that has 2 targets and 4 drag sources.  3 of the sources go to 1 goal and 1 source to another.  What I try to do is:

  1. when the first source fell next on the list will appear and so on for the 4 options.

  2. when the user clicks on the button send a "Congratulations" message appears.

  3 when the wrong answer is removed, the source snaps back into the list.

  I have tried so many different configurations... any help is very appreciated.

  At wanted to check a second time, I have therefore created a short with project

  • four containers of text as drag sources: S_one, S_two, S_three, S_four
  • two targets Target1 and Target2
  • S_one and the fall of two targets are visible output
  • S_two, S_three and S_four are invisible in output
  • in my configuration, what do drag the first three sources were to return to Target1 and Target1 S_four; your installation may be different, but you set the drag source sequence, so you know perfectly well that one should apply to that target
  • set up the D & D according to the usual procedure
  • Destination1 and click 'Actions of the object' of the D & D Panel format tab. Because I'm in the CP9 who has the opportunity to uncheck 'Project to continue playing' for a single action, I could use them. Look at this screenshot:
    I unchecked all accept and indicated the correct three, drag sources, changed the number 3, because they will have to be accepted all of them on the first target. Sources of bad drag will be 'Go back' to its original position.
    After dragging S_One action was changed to show S_Two (second drag source). You must change this simple action for a standard action "Execute advanced Action" with the same unique command "S_two Show" to avoid releasing the read head. If you're familiar with this, I would use a shared action. Similar editing for the other two sources of drag, just change S_Two of S_Three to the second action and S_four for the third action.
  • Select Target2, again press the object actions, uncheck the box "accept all the ' and indicate good drag source, this time count is 1. In my setup you don't have to choose the action, because it's the last drag source. However if the drag source is not S_four for this target, you must put in a similar action, as I explained to Target1 and take action on the last drag source that will then be in the Target1 dialog box.

  As for the Message should appear, I have explained in the blog post (a first) how to create a success Message. BTW this success message is now available out of the box to the CP9.

• In ADF how drag and drop onto a tree to another tree node

  Hi all

  Can all give examples of code, or tree of ways to drag and drop nodes from one tree to another tree.

  Here the drag source is tree and the target is also tree, it should allow me to slip and fall of the scale of the tree.

  Thank you

  Srikanth

  To be passed to af:tree consult

  Drop trees

• Drag and drop in training mode - possible for 8 Captivate?

  Hello world

  I have a simple question:

  My e-learning consists of demonstrations and following training. Now imagine there is a drag and drop features: you drag an object in the software and drop somewhere is possible to simulate this also in training mode (when the user needs Act / needs to drag and drop)?

  I am happy to hear from you!
  Greetings from the Germany,

  Chris

  You will need to create the drag & drop drag yourself, using either the Assistant or the D & D Panel. To be able to do so, you need all the advantages: background, drag sources at least. For the target, you can add shapes. That's why I said you need to capture these assets, which can be made by adding only an additional screen captures during the registration process. In addition you will probably need a graphics editor (photoshop or similar) to create sources of drag on the screenshots. It is NOT possible to do it with simple low to capture work, this will be a blade to be inserted later.

• Drag sources don't snaps to the Center

  Hi - I created an interaction drag-and - drop and specified the sources of drag align with the center of drop targets. However, they are compensated at the lower right when dropped.

  Some of my drop targets had shadows around the borders. I removed the shadow, and it worked. However, other drop targets had not first shadows, and those are always compensated lower right.

  I tried to expand the drop target area, but have no effect.

  Any ideas? Thank you!!

  I'd check here, are the two forms, with different contour/background and text in the case of the drag source?

  Indeed, I see exactly the same bug in this case. It works perfectly if you take the upper left corner, for all the other locations of wink the drag source has an offset. You can use the upper left corner, but this is certainly not what is expected. Bug appears only for a SWF output.

• Drag-and-drop success Message and Timer on all chassis in Captivate

  Hi all

  I'm trying to do two things in a captivate project that I am working. They are:-

  1. I have an exercise slide - déposer I chose the setting that the decline does not accept point slide wrong and sends it back immediately. I'm doing a legend of success as 'Good work' or something displayed on the user put all the drag source in the correct deposit boxes. I do not use the submit button. Once appears the legend of success, the user can click a next button to move to the next slide. I am not able to put the legend of success.

  2. I'm trying to put a timer on the blades so that the user can see the total length of the e-Learning, time elapsed or time left on all slides.

  Can you guys help me with these questions I have.

  Thank you

  Aashish

  Hello

  1. you define the activity of Auto submit the correct answers. It is under the accordion of Options in properties of Drag and Drop. Then run an advanced action to display the legend of success and the next button on the success of the activity.

  2. to do this, I would recommend the blog of Lilybiri here.

  Displays the time information - Captivate blog

  Anthony

• Drag and Drop Feedback in Captivate reg 7

  Hello

  I have a drag and drop into a slide (7 Captivate) as a control of knowledge.

  Problem: I need correct feedback interaction drag-and - drop is reset whenever the learner does not return to the slide slide / move later or click on the back of the next slide button. Currently, the correct feedback is present.

  Background: The learner ends slide it / move and gets feedback 'Okay!' action show and "Incorrect" comments of the existing captivate feedback: failure. The learner then continues the lesson on the way to the next slide. The problem is that, if the learner is returned for drag / move, 'Okay!' feedback still shows even if the drag source items are reset to their original locations and the learner can repeat the interaction drag-and - drop. By clicking on the button "Reset" does not remove the existing 'Okay!' feedback. Even if the learner restores the interaction and the opposite effect (for example if the learner is wrong the first time, but then correct themselves the second time), the existing comments do not change to "correct".

  Any ideas on how to solve this problem? I understand that we need to create advanced actions. Please tell me the exact steps in this case, and if I have to perform actions on enter or exit.

  Note: I am tired of reading messages associated with it. But the creation of the advanced options step did not have.

  Thank you.

  Ok.  Just a question because I saw one of the Adobe people chime in on a similar question a couple of days back.

  Unlike the quiz questions, success and failure captions to make drag and drop interactions seem to have names of elements which suggests that they may be hidden by advanced Actions.  You should try to define an action on slide enter to hide and see if that solves your problem.