Identity of engine services

Similar Questions

• Stopping the engine Service Variable OR in Windows 7 64 bit

  Operating system: Windows 7 (64-bit)

  Version 9 of Labivew.

  I configured puts some Boolean and Out entries and an analog input (Double) for monitoring purposes. I use a server OPC Mitsubishi with Labview 2009. (It worked great for over a year)

  When I delopy the Variable Libray it works very well for about 1 minutes, then NI Variable Engine Service STOPS. (As shown in the Attached files)

  But if I remove the analog input, the Variable does not stop and works very well.

  In the first attempt I stretched the Labview and 2nd attempt re-installed Labivew 2009 as well as Windows but still the same problem.

  If his problem installing then why it works for Boolean types

  Windows event monitor has additional information as to why the service stopped? If you create a new project with a library of double of accommodation and Boolean variables which also stops after a minute?

  Also can you us more info on the double in question. Is this a normal SV or is it bound to an OPC tag? If unbind you it the EVS will remain after a minute?

• my windows base filtering engine service does not work according to norton

  just sub renewed norton 360 v6 displays an error saying my base filtering engine service window does not work

  Hello marshallfullenwider,

  Look at the post below to see if that will help your question.

  http://social.technet.Microsoft.com/forums/en/itprovistanetworking/thread/06144d3a-9AB0-4e09-a522-f085bc8c17fb

  If this isn't the case, answer just to come back and let us know.

  Thank you

  Marilyn

• base filtering engine service

  How do you start base engine service of filtering for vista?

  Hello

  Start - type in the search box-> find Services at top - click right on - RUN AS ADMIN

  BlackViper - Services
  http://www.blackviper.com/WinVista/servicecfg.htm

  BFE - check all dependencies
  http://wiki.blackviper.com/wiki/Base_Filtering_Engine

  If necessary to reset ALL services to default values.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows could not start the Base Filtering Engine service's local computer

  I get this error

  Windows could not start the Base Filtering Engine service's local computer
  Error5: Access denied

  When I try to start it but it won't start

  My computer is

  Windows 7 Home Premium

  64 bit

  Hello

  1. don't you make software changes before the show?
  2. do you have anti-virus outside Microsoft Product software?
   
  Follow method 3 in this article:
  http://support.Microsoft.com/kb/2530126
   
  
   

• Base filtering engine service, I learn by Norton that the windows base filtering engine service is not running on our laptop.

  I was informed by Norton that the windows base filtering engine service is not running on our laptop.

  And I need to notifify you.

  The filter Base (BFE) engine is a service that manages firewall and Internet Protocol (IP, IPsec) security policies and implements user mode filtering. Stopping or disabling the BFE service will significantly reduce the security of the system. It will also result in unpredictable behavior in IPsec management and firewall applications.

  Firewall Windows depends on BFE works correctly.

  To find out if BFE is running on your system, click Start, and then type this command:

  cmd /k sc qc bfe

  Press {ENTER}

  If you receive the following error:

  [SC] OpenService FAILED 1060:

  The specified service does not exist as an installed service.

  It is generally the work of one or more malicious software. See this address for the explanation and information on how to restore the missing service:

  The motor filter (BFE) basic service is missing: why it is happening and how to restore:
  http://www.hageltech.com/blog/2012/02/07/base-filtering-engine-problems.html

  or you can download and apply the patch from BFE (#11) of this page service registry:

  Register various fixes for Windows 7/XP/Vista - the Winhelponline Blog:
  http://www.Winhelponline.com/blog/Misc-registry-fixes-for-Windows-7-XP-Vista/

• Norton 360 error filtering Kit from root, base engine service in services.msc be set to automatic

  comeing from fis Norton 360 upward with a 5013.3 b error by referring to a mistake of root kit he tries to fix and declares thast motor service in services.msc filtering be set to automatic. There is no filteering database engine in the services of someone knows what this is referring to.

  A missing Base filtering engine (and often other services including the Windows Firewall) are almost always the result of a severe malware infection after removing some registry keys.
  Sirefef is a municipality convicted malware.  This type of damage can be very difficult to repair.  You must also ensure that no remaining infection.

  See the link below.   This fix is well worth trying, but if your system has been damaged by malicious programs such as Sirefef there may be more issues involved.

  blogs.technet.com/b/asiasupp/archive/2011/12/27/error-code-0x80070424-with-Windows-Firewall-and-quot-base-filtering-engine-service-quot-not-available-in-services-database-list.aspx

• New engine Service Cisco Identity

  Does anyone know if the Cisco ISE not GANYMEDE?

  Hello

  Nope. It's pure RADIUS.

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.

• Relocation of the filtering engine Service based on Windows 7 Dell XPS

  How can I get the Base filtering engine reinstalled on my Dell XPS with Windows 7 Ultimate operating systems?

  The motor filter (BFE) basic service is missing: why it is happening and how to restore

  See: http://www.hageltech.com/blog/2012/02/07/base-filtering-engine-problems.html

  J W Stuart: http://www.pagestart.com

• No internet connection with base filtering engine service turned on

  I have a DELL PC running Windows 7 Home premium 64-bit and McAfee (preload) antivirus and firewalls.  The system has recently lost access to the internet.  If I boot in safe mode with networking, I get internet access.  Normal startup come "connected, but no internet" and I can't even ping the router.

  The PC is connected directly to the router using a network cable.

  After a bit of investigation, my problem seems connected to the service of 'Base filtering engine.  If I run MSCONFIG to disable this service and reboot, I get a full internet access.  Although this seems to solve my problems, I'm not sure it's a wise thing to do that I think it is maybe important for safety reasons (?) and need advice.

  Windows Firewall does not work as I am running McAfee firewall which reports 'and '.

  Any help and advice would be greatly appreciated.

  Hello

  I suggest you to refer to the thread and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/no-Internet-access-after-Windows-Update-on-18/00e14227-a70d-4003-8e60-de6ca5126ee8

  Let us know if it helps.

• Services do not start. I get error 5 - BFE, DHCP, & DPS; I get error 1068-IKE, IPsec Service & network list

  Vista Home Premium SP2

  Error 5: Access denied

  Cannot start BFE Base Filtering Engine service

  DHCP Client service

  Diagnostic policy service

  Error 1068: The dependency group or the service could not start

  IKE and AuthIP IPsec Keying Modules

  IPsec policy agent

  Network list service

  Error 1073741288

  Network location awareness

  I checked the forum after forum with no luck.  Any ideas?

  Hello

  ·         What services can you try to start?

  ·         What is the problem you are having with the computer?

  ·         Logged in Administrator?

  ·         You will remember to do recent changes on the computer before this problem?

  ·         Your computer is on the field?

  Response with above information to better help you.

  I suggest you to follow the steps in the link and check if the problem occurs:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/Windows-could-not-start-error-1068-the-dependency/7963d72a-5d73-44fe-8316-058c46235737?page=1

• Base filtering engine does not turn

  Well first of all, today my computer was working fine. Then I turned off and turn it back on later and I tried to use the internet and it would not connect or Windows Firewall. Then, I started to look around for help & support, and I found that it is controlled by the Base filtering engine and I looked and he was off. So, I tried to start it and it wouldn't turn on I got a message that says "Windows has no start the engine service of filtering based on Local computer." Error 5: Access is denied. Now I use a friends computer to search for answers, but I can't find anywhere. The system restore points were not available either, so I couldn't restore it. Please help I've looked everywhere and no luck. I really don't want to recover my computer and lost all my files. Oh and btw I have a Windows Vista Home Premium am I'm on a local computer.

  My problem is still there, but I guess I'm going to just send to HP and the fixed or recovered. I tried safe mode and that has not worked and I tried what he said about Microsoft Support, but no luck.

• Can I disable the Terminal Services if I don't use remote assistance/remote desktop?

  I use can I have Vista 32 bit home premium

  I thought that Vista have no remote desktop? Is not Terminal identical remote desktop services?

  When I go

  MyComputer > right click > properties > remote adjustment

  the box for "Allow remote Assisnatnce" is NOT COCHEE

  But when I run Netstat - ano, I see that port 3389 is listening svchost.exe process when I checal what services are related to this particular svchost.exe, I see the following services:

  Cryptographic services
  DNS client
  network location awareness
  KtmRm for distributed transaction coordination
  telephony

  and Terminal Server services

  Seems to be at a point several years ago, I allowed someone from microsoft to help me through the assistance at a distance could therefore have enabled or downloaded services Terminal Server?

  In any case, I think that Terminal Services is initially port 3389 to remain open and thus get an unsolicited connection attempts from different IP addresses.

  I tried a little experiment and finished the Terminal Services and changed the status of manual start-up. When I still ran netstat - ano, he showed no listening on port 3389

  However, when I rebooted my computer Terminal Server was running again. So I ended it again but this time off the service. When I fell net stat - ano he showed terminal services does not. then when I restarted my computer, Terminal Server services do not have turn on port 3389 has not been shown that listening

  SO my question is, as a user of Vista which doesn't use remote help desk or remotely.

  1. I CAN keep the disabled Services Terminal Server?

  2. it cause me any problem of operation or security if she stays in the disabled state?

  3 have disabled will cause me to not be able to get the scheduled updates?

  Thank you

  But I have been informed by Norton Personal asa require a Terminal Server Services be, nit for the part of remote assistance, but for other reasons. They say I can't turn off

• Unable to start the Base filtering engine, error 5: access denied

  I just discovered my base filtering engine service is not enabled. My antivirus (panda) and firewall (zonealarm) seem to work fine, I scanned my computer and there was no detected virus. I don't know why BFE does not work and I looked everywhere online for solutions to this. Any help would be greatly appreciated.

  Hello

  According to the description, I understand that you get an error message.

  I suggest you to refer to the suggestions of Sharief K responded on 23 May 2013 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-could-not-start-base-filtering-engine-on/539e2208-6c59-47dc-9f73-dc6d2fa83ee0

  Registry warning: Back up the registry

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Peer Networking Grouping Service does not work; How can I make it work?

  I use Windows 7 and trying to set up a home network I am unable. After you run the troubleshooter, the only problem is that the Peer Networking Grouping Service does not work. Messages to indicate there is no other problems other than Peer name resolution Protocol (PNRPsvc) Service or the Peer Neetworking Identity Manager (p2pimsvc) Service is not running.

  How can I solve this problem?

  Hello

  First delete the file idstore.sst from the following location: C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore.sst and once you remove, restart the service Peer Networking grouping.

  Follow the steps to restart the service:

  a. click Start, type Services.msc in the search box and press enter.

  (b) in the Services window, search for Peer Networking Grouping.

  c. make a right click the service: peer networking grouping and click restart.

  Also, see the following Microsoft articles:

  Establishment of a network domestic:
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Why can't I create a homegroup? :
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-create-a-HomeGroup

  Hope the information is useful.