IE goes into Debug F12 Mode when you create new phase of spec development process

Similar Questions

• receive error message: user account already exists when you create new mail user account

  Hi guys!

  I don't know if anyone else has encountered this but here is what happened.
  I installed windows 8 and connected with my email account. Since this is the only account he had administrator rights. So I decided to create a local administrator account by accessing the computer with the button right-> manage-> users-> local users and groups. I enabled the administrator account. Below it was also my e-mail account. After I restarted the PC, I found that I could only log in as administrator. I couldn't change the connection! I was so frustrated. Finally I had to remove the computer right click e-mail account-> manage-> users-> users and groups and then create the opening bar charms-> settings-> PC-> users change settings and adding my email account it. Now when I logged in as a user of e-mail account, I can't find any of my applications! I must now connect on all sync settings, reconnect my music players, etc. etc. This is BAD! :-(
  Hope someone can tell me why this happened.

  Hello

  Removal of Microsoft Account is same as the removal of the Windows 8 operating system user account. Whenever you remove the Microsoft Account or the Windows 8 operating system user account, it will remove all applications and settings.  In this case, you must reinstall all applications on the Store.

  I suggest you to re - install apps on the store

  Follow these steps to reinstall the applications on Windows Store;

  (a) open the Windows Store.

  window b) right-click on Windows Store.

  (c) on the top of the window, select your applications.

  (d) click the drop down arrow and select Apps installed on this pc.

  (e) it will display the list of applications that are not installed on the computer.

  (f) you can select the applications and you can reinstall it on the pc.

  If you have questions/suggestions more associated with Windows, feel free to post. We will be happy to help you.

• Font size unstable when you create the text layer in batch processing

  Hello

  Using photoshop CS6 on Mac, I see a problem with one of my batch sript which is only task is to apply a water embossed mark to the images that I've resized so that the longest side is always 500px. (varies depending on how I've cropped short side).

  In most cases, the text element, I add to the image seems to be in good condition. But then no reason apparent, it will suddenly apply the text (that I put to 24pt) and it means big. To solve the problem, I have to reduce the size of police (via shares pallate) down to 8 pt. Then he begins to appear more or less correctly (for a while) up to maybe a few weeks later, when I open photoshop to run the task again and suddenly pt 8 fonts is FAR too small and I have to bump up to 24pt again.

  I don't know what I could do to cause this problem. I never waste time with processing another batch and then to resolve this issue when it occurs.

  Thank you

  If this is the cause of the problem, a step in the Action that changes the resolution of 300ppi ("with resampling"unchecked) could help.

• Monitor Dell Vostro 2705 keeps going into power saving mode

  I have a Dell Vostro 2705. When I turn it on, the screen goes into power saving mode. We tried with a different monitor and it still does not work. I do not see there is a separate video card to replace it. Can it be fixed or is - a new computer?

  Thanks in advance for your advice.

  Judy

  Hello

  Its usually a faulty motherboard. So the only option is to get the Board replaced.

  You can try doing a power cycle and if still doesn't work then a replacement of the Board of Directors.

  Concerning

• Monitor goes into power saving mode or restarting PC

  I recently bought a Dell XP 8500 with 7870 AMD and Dell U241M monitor.

  When the computer is turned off for awhile (overnight, for example), the monitor almost always goes into energy saving mode while the PC starts in the AM (I do not see the BIOS/post visuals). If I stop the PC and power cycle a few times (turn on/off the monitor and the PC at the same time) it will generally work after 3-4 tests.

  "Sleep" mode on the PC is turned off.

  If I turn off the PC for the night and leave the monitor to go to sleep, the monitor wakes up fine when I move the mouse the next AM.

  If I turn off the PC overnight and also If turned off the monitor, PC restarts when I turn on the monitor of the AOS .

  If I turn off the PC or the monitor for a few minutes, it will work the next time it starts perfectly. The problems seem to be when he stayed all night.

  I have exchanged monitors and see the same problem with the XPS and another monitor, while the U2412M works fine on another PC.

  I tried DVI - DVI and DisplayPort to DisplayPort Cable with no difference. I tried to plug in a different bar / food. I tried to replace the GPU and checked that GPU power cable connections are tight.

  So, I guess that the problem is in the hardware XPS GPU or PSU and I'm quite surprised it didn't fall Dell quality control (or it has been damaged during transport?).

  Any thoughts? I don't really want a backup and reconfigure a new Tower and thought that I would get away from this kind of problems by going with a Dell.

  Thank you

  Sam

  For those who might wonder what was the end result, Dell has replaced the GPU and now it's fine.

• goes into infinity "tabs" loop when I type any email 'Contact us' button how can I stop the loop?

  goes into infinity "tabs" loop when I type any email 'Contact us' button how can I stop the loop?

  You use a Mac, or you're on another platform?

  Any other use of platforms:

  • Mac: Firefox > Preferences
  • Linux: Edit > Preferences
  • Windows: Firefox > Options

  Press F10, if the menu bar is hidden under Windows and Linux, or use "> Firefox Options/preferences.

  • http://KB.mozillazine.org/File_types_and_download_actions
  • https://support.Mozilla.org/KB/managing+file+types

• Portege M400: screen power save after going into power saving mode

  When my monitor goes into power saving mode sometimes, it is not be able to save, I solved this stopping mode energy saving, but it means that I have to drain the battery much faster help!

  I'm sure it's just the screen as I can hit the power button and it seems closed, (it crashes out of sleep mode and I only managed to get it to go into hibernation, once with success (he complains that there there not enough wealth, but there a lot 33 GB of free hard disk! that's a lot to store 2 GB of ram) it is really annoying and I have yet) the laptop over a week!

  Is it possible to find a solution or a way to find what is causeing these issues?

  -
  Garthark

  Hi Oliver

  I read your messages carefully and I'm really a bit confused. As far as I know all the tools pre-installed on each unit of Toshiba are tested. Sleep mode and standby extended too and I can't really understand what is happening in your case.

  The problem may be caused by the use of some third-party software of the part. In my opinion, do not do some experiments with non-Toshiba (driver chipset or display) software, because the software is adapted to the architecture of the unit and equipment.

• Monitor goes into power saving mode

  I have a client with a 660 Inspiron, and while working on this subject, the monitor goes into power saving mode.  Using another monitor has the same results. Now, here's the catch, the motherboard has been replaced with the same results so Dell sent his computer to another. After that set up the new computer things seemed to be OK for about 30 minutes, and then the new computer came into power saving mode. Again with another monitor to get the same results. Any thoughts?

  Hi TimMcKinney,

  Welcome to the community.

  Please let us know the version of windows and the video card installed on the system. Please check the system with a different video cable as well.

  Once the system goes into power saving mode please let us know the color of the leds on the tower.

  If you have additional questions, feel free to contact us.

  Thanks and greetings
  Sandeep P
  #iworkfordell

• I've just updated to Firefox Beta 20. Not happy! The options "View Background Image" and "Image Mode" when you right-click is missing. How can I get that back?

  I've just updated to Firefox Beta 20. Not happy! The options "View Background Image" and "Image Mode" when you right-click is missing. How can I get that back?

  These entries should still be there if you right click on an image or an area with a background image.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• How do you get the layers work correctly when you create a document merged into the InDesign data merge feature?

  Hey everybody,

  I working on a card game using data with a .csv file merge and spin in unusual behavior when you create a merged document when my master document had layers.  Imagine I had a layer of structure that looks like this:

  Layer has
  -< DataMergeFrameA >

  -Cooked in the static element
  Layer B

  -Cooked in the static element B
  -< DataMergeFrameB >

  -< DataMergeFrameC >

  Layer C
  -Cooked in the static element C

  -< DataMergeFrameD >

  Preview, this hierarchy is respected and the image is superb.

  When I create my merged document that each individual card includes this editable structure:

  Layer has
  -< DataMergeFrameA >

  Layer B

  -< DataMergeFrameB >

  -< DataMergeFrameC >

  Layer C

  -< DataMergeFrameD >

  And the order in which the elements are drawn resembles what happened past:

  -< DataMergeFrameA >

  -< DataMergeFrameB >

  -< DataMergeFrameC >

  -< DataMergeFrameD >

  -Cooked in the static element

  -Cooked in the static element B

  -Cooked in the static element C

  I would * really * like solving this problem without going through a column of data fusion with just the same picture in each area or something stupid like that, especially because some of my other static elements are generic text boxes. Is it possible to apply the stacking order in a merged document?

  I have attached a screenshot of the preview and the merged document.
  * WARNING: The main art is a temporary placeholder *.

  The one on the left is how it looks in preview. The second is the merged document. The major problems are that a) static grass image should appear on the art main and b) main image overlays areas of main text on the left. How can-

  

  Try moving it all off the master and on the page of document in the model.

• What happened to the image field when you create a field of type of image for the Web application?

  What happened to the image field when you create a field of type of image for the Web application?

  The answer is that the point of the IMAGE has been changed to the MEDIA.

  Sorry, Ian, what research for this discussion, I got no results. All good and thanks for the carillon. Hope everything goes well.

  Mouma

• When you create a PDF to ppt, pdf can be created in unique pages instead of a complete document

  When you create a PDF to ppt, pdf can be created in unique pages instead of a complete document?

  After Acrobat create a PDF from multiple pages, you can use the Extract command to break into single pages. You can do this either in tools > Pages, or in the Options menu for the Page thumbnails pane.

• Get the blue screen when you create a new message or the response message in OWA Exchange 2007

  Get the blue screen when you create a new message or the response message in OWA (Exchange 2007)

  Hello

  I suggest you post the question in the forums and check them off below if it helps:

  http://social.technet.Microsoft.com/forums/en-us/exchangesvrclients/

  It will be useful.

• When you create a new message in Windows Mail only some contact appear just by typing the first few letters of their name

  Original title: Windows mail contact probrem

  When you create a new email, why some of my E-mail contacts appear with just by typing the first letters of his name while other contacts in my list do not appear?

  for example, if I send an email to alan, so when I type the letter 'a' all contacts beginning with 'a' used to appear and you can select whatever you want. This is not the case now, and I have checked the contacts that do not appear are saved the same way as those that appear.

  Any suggestions please

  WinMail stores AutoComplete addresses in the registry and it has a maximum of 29. Claire on some dead wood.
   
  How to delete registration completion email in Windows Mail
  http://www.Winhelponline.com/articles/245/1/how-to-clear-the-email-auto-complete-entries-in-Windows-mail.html
   
  How to remove an address from the list of AutoComplete in Windows Mail
  http://email.about.com/od/windowsmailtips/Qt/et_del_autocomp.htm 

• When you create a new email a first letter of the contact request full email address on frequent contacts.

  original title: contact prompting

  When you create a new email a first letter of the contact request full email address on frequent contacts. How to extend the time, what he remembers of those contacts?

  WinMail remembers only 29 addresses used through the registry. These links will give you a few options.

  How to delete registration completion email in Windows Mail
  http://www.Winhelponline.com/articles/245/1/how-to-clear-the-email-auto-complete-entries-in-Windows-mail.html

  How to remove an address from the list of AutoComplete in Windows Mail
  http://email.about.com/od/windowsmailtips/Qt/et_del_autocomp.htm