IE9 update, small fonts

Similar Questions

• Small fonts for Firefox 35.0.1 display wrong after Windows Update 10/02/15

  After that Microsoft has made an update (attached picture) many small fonts display is bad (attached image). I see it in any other program, including IE. Not all fonts are bad, just a few small. Everything on your page here seems fine.

  Thank you

  Chris

  HitokiriBattousai said

  I uninstalled 3013455 and the problem disappeared, so if you want to get rid of it you can uninstall it or wait for microsoft to get out a fix for it

  Me too! I didn't know that Vista would let me do that!

  Thank you all.

  (1) run Windows Update in Control Panel
  (2) at the bottom left, click on to change the installed updates
  (3) find 3013455 and uninstall

• composition window is suddenly using a small font (2 - pt?) -the police appear correct when sending.

  The message compose window suddenly use a small font (2 - pt?). It happened "spontaneously" when replying to a message. It happens all the time now.
  When the message is sent subsequently, the fonts are normal in size. When I increase the font size in the composition window, it seems enormous after sending.
  I use a Mac with OS 10.9.2.
  Any ideas on restoring the sizes of police in the compose window?

  I had some strange font problems in the past, but none who survived a reboot. I guess you have restarted Thunderbird?

  Menu help > troubleshooting information, then click on the button display for the profile folder.
  Close Thunderbird
  Delete the panacea.dat file and restart Thunderbird

• My guest user account has stopped working after the installation of several windows and IE9 updates.

  I recently installed several windows and IE9 updates. During the install IE9 I stopped the installation process, because it seemed that I had two IE9 installs go. I ended up cancelling the installation so IE9 has not installed. I tried to install IE9 again and this time I can't stop installation, and it has been successful. I checked the other user profiles to make sure that everything has been installed, and that's when I noticed that my guest account wasn't just all users accounts were working well.

  Whenever I try to open a program, for example: Internet explore, any Office program and even the calculator another window opens asking me to manually locate the file I'm looking for. I am able to locate the file and open it, but as soon as I close I can't reopen unless I have to manually search for the file. There is a checkbox indicating that it automatically uses this file with the program but I can't check the box (its in a light gray that I can't click on) and I don't want to manually search the file everytime I open a program. I tried using a restore point before updates, but which did not set can guest account everyone please help?

  [1] I need to correct me by declaring that the Mcafee subscription is 18 months and its due for renewal in June, then yes its still the preinstalled version.

  [2] will certainly be your advice on that. Should what drivers I roll back?

  [3] I thought to go on this forum first, but I chose it because the error occurred while I was updating, but I'll post my question it too

  A1A. Ah! The application is named McAfee Security Center by chance?

  A1B. Do you plan to purchase a subscription for this or any other McAfee application (which you would need to do so BEFORE the expiry of 18 months 'advance')?

  A2. In re the restore drivers, you restore the drivers that you have installed via Windows Update. that is, Intel G45/G43 Express Chipset (graphics driver or screen) and Realtek PCIe GBE Family Controller (NIC driver). Again, this is a long shot.

  A3. Please do that start new thread immediately.

• small font

  Ive had many problems when trying to install my easy share camera now wen I try 2 install the easyshare disc it tells me I should change for small fonts and then he comes up with to turn off my compatibility. allso wen I turn on my computer it says it cannot find my dll is - everything connected or should I buy a new computer.

  Hello

  ·         What is the exact error that you are experiencing? Are which dll file you referring?

  ·         What is the model of your camera?

  ·         You try to install the software in compatibility mode?

  Instead of installing the software from the disk, I suggest to download from the below mentioned link easy sharing software and install it on the system and check if the problem is resolved.

  KODAK EASYSHARE Software

  http://www.kodak.com/eknec/PageQuerier.jhtml?PQ-path=164/150/130&PQ-locale=en_US

• My Dell all in one printer prints in very small fonts, anyone know what I did to print to narmal? Thank you

  My Dell all in one printer started printing in small fonts
  Anyone know why, or if I pushed a button by mistake?  Help, please
  Thank you

  Hello

  ·          The problem occurs when you print from any application?

  Step 1: Check if the same font size appears in the preview before printing.

  See: http://windows.microsoft.com/en-US/windows-vista/Choosing-print-options

  http://Windows.Microsoft.com/en-us/Windows-Vista/preview-the-appearance-of-a-printed-webpage

• Set the font size as system as "small fonts"?

  I am launching a game using Vista.  When I click on the application icon does appear this error message-

  This application requires the size of the font on your system must be set to "small fonts".  Please change this setting using the Control Panel, and then restart the game

  But I don't know how to do this.  Any ideas?

  http://www.vista4beginners.com/how-to-change-font-size

  How to change the font size in Windows Vista

  http://www.ehow.com/how_5920442_change-font-size-Vista.html

  See you soon.

  Mick Murphy - Microsoft partner

• Small fonts in the dialog, menu, tab boxes

  New machine with Windows 7 Home Premium 64 - Bit.  The size of the font on the tabs and the menu selections under them in different dialogue and mindows menu boxes are too small.  I will mention here that those found in Windows, IE8 and other programs MS, that come with a default installation, no software.  How to resolve them without using the magnifying glass and without increasing the magnification?  My screen resolution is the recommended setting, dpi is 100%, the graphics card to recommended settings.  I've used the features of personalization to increase the size of fonts and other parameters for items like the title bar Active, et al.  Even here in this forum I have trouble reading because of small font size and I don't see a way to increase locally or globally.

  Separate but related question: having increased sizes of fonts, etc., using personalization, now the text is too large for the boxes used in different windows.  For example, the text entered in the search help box is too large vertically so the bottom of the text is cut off.  How can this be corrected?

  In terms of Web pages, just click ctrl + scroll upward. You can change the size of this way. Use it in combination with ronnies DPI change might look a little better?

• Page Web has small fonts after the cat jumped on the keyboard

  My cat jumped on my keyboard and stepped on some keys, and my web pages now have small fonts.  How can I fix it?  It is not on all pages, just that I was at the time.

  Thank you.

  Moved from the community involvement Center

  Original title: Jtynall

  Thank you; I finally understood that after playing a bit.

  I appreciate your time and happy holidays!

• More small font of J2ME on Blackberry "BOLD"? small proportional, plain?

  Hello, what is the smallest police achievable J2ME on the Blackberry Bold? I ask this, because

  style = "plain" face = "proportional" size = "small".

  seems to be already very large and very bold? Is there a way to get a smaller font, without leaving the environment "J2ME"?

  I would first like to say Java and GNU license gave me a very big heart. This whole community has helped me tremendously to learn how to code, and give in return is the least I could do. I hope that the community in turn help me when I reached the rough places in the future. Don't forget I've been working on this code and it took me hours of exhaustian and works well and I am now it give for free, so please do the same for others. It is the idea not the code that makes money.

  That said, I present to you:

  How to solve the problem of police of blackberry in 5 minutes of coding a moped.

  (please link to this topic as much as possible)

  Step 1: Analyze what is happening between the 2 separate API and why it is so difficult to change fonts.

  Step 2: Ask how are packages come into conflict with each other?

  Step 3: Ask you... can I change the font in general?

  Step 4: Run the text following preference somewhere in the constructor... and somewhere off of the paint method.

  final FontFamily fontFamily[] = FontFamily.getFontFamilies();
  
      font10 = fontFamily[0].getFont(FontFamily.CBTF_FONT, 16);
      Font.setDefaultFont(font10);
  

  Keep in mind that you must have the good net_rim_api.jar installed (or the appropriate folder and configuration via the Toolbox correctly)... and in my case, the following code is at the top of my class file and I use an external library on my toolbox.

  import net.rim.device.api.ui.Font;
  import net.rim.device.api.ui.FontFamily;
  

  now, it's just a natural function used for user interface of blackberry and midlets applications using the Blackberry net_rim_api.jar as an external module.

  Those of you who are running a blackberrycanvas or a touch event for the blackberry storm should automatically know what I speak. Send me an Email if you are at all confused, that I'll get back to you.

  Anyway go...

  Run this natural function and go ahead and test it using a common g.drawString ("Hello World", 20,20, g.TOP | g.LEFT);

  Here you should notice that your policy has changed the font specified by Font.setDefaultFont (font10);

  This is because the static method changes all fonts... including police BlackBerryMenu I might add.

  Then, perform the following steps:

  Step 5: Ask yourself... but what happens if I separated from the places that need separate policies?

  Good question... I had this one for awhile and found a brilliant answer.

  Note the following points:

  Font BBFont = javax.microedition.lcdui.Font.getDefaultFont();
  

  Here is what just happened, the above code catches the current default font defined for the lcdui police. Or in our case, the police of the Midlet. As I looked into it... There is no method to create a nice font that corresponds to the blackberry one again... but after calling

  Font.setDefaultFont (font10);

  in this case the police is referenced as...

  net.rim.device.api.ui.Font

  It amends the police for both the system and the

  javax.microedition.lcdui.Font

  It is signifigant for us because now, because we can store the new settings, we can make the magic happen.

  Step 6: Perform magic with the fonts.

  Store any desired blackberry font using the following...

  final FontFamily fontFamily[] = FontFamily.getFontFamilies();
  
      Font font10 = fontFamily[4].getFont(FontFamily.CBTF_FONT, 16);
      Font.setDefaultFont(font10);
      javax.microedition.lcdui.Font bbfont = javax.microedition.lcdui.Font.getDefaultFont();
  

  do not hesitate to make the police a variable, you can reference from the whole class... or keep it in another class if you wish.

  then do this in the paint method...

  protected void paint(Graphics g){
  
  g.setFont(bbfont);
  g.drawString("Hello World",20,20,g.TOP|g.LEFT);
  
  }
  

  You should find that the police has changed very nicely your new font... here make a function out of it, change the fonts to the top.

  Step 7: bask in the glory of magic.

  So you tell me if I call Font.setDefaultFont (myfont);

  and I use a blackberry police... it will change the current font... then I can go then enter this police and store it and then call at a later date, and it will use this font?

  I mean that Times New Roman!

  Well, if they have Times New Roman can be my guest...

  but later I want to black Ariel...

  Yes same process be my guest...

  But man according to the forums, I can't do that...

  Yes, and you can quote me on this one there according to JavaLover53 you can use what font you want, as long as you do the police first... and it is strongly recommended that you do outside the paint function and you store fonts in one easy to access place in memory, namely the Summit also recommended

  import net.rim.device.api.ui.Font;import net.rim.device.api.ui.FontFamily;import javax.microedition.lcdui.*;public class BBFontCanvas extends Canvas {javax.microedition.lcdui.Font timesnewroman;javax.microedition.lcdui.Font bbalphasans;
  
  public BBFontCanvas(){  final FontFamily fontFamily[] = FontFamily.getFontFamilies();
  
     font10 = fontFamily[4].getFont(FontFamily.CBTF_FONT, 16); Font.setDefaultFont(font10);  bbalphasans = javax.microedition.lcdui.Font.getDefaultFont();
  
  //have fun and make another font...      font10 = fontFamily[0].getFont(FontFamily.CBTF_FONT, 20); Font.setDefaultFont(font10);      timesnewroman = javax.microedition.lcdui.Font.getDefaultFont();}
  
  public void changeFont(int fontnum){
  
  //i figure from here you can do a switch statement to change the font...//or idk perhaps just do it by fontnum//you guys gotta code that up haha.//it'll probably look like this though...   //public void changeFont(int fontnum,javax.microedition.lcdui.Font thefont){}//or maybe you wanta return a new font so....//public javax.microedition.lcdui.Font getNewFont(int fontnum,javax.microedition.lcdui.Font thefont){}
  
  //then make like a switch statement, and then call this to establish the fonts you want in advance and store //these fonts use them for classes you have for classes you've made like void setFont(Font myfont); <--- in//that case your midlet class never even heard of the blackberry font so you're passing a normal lcdui font.//anyways point being as long as g.setFont(myfont); has the proper font this stuff works. :-)
  
   font10 = fontFamily[2].getFont(FontFamily.CBTF_FONT, 16); Font.setDefaultFont(font10);  bbalphasans = javax.microedition.lcdui.Font.getDefaultFont();}     public void paint(Graphics g){     g.setColor(0,0,0);     g.fillRect(500,500);     g.setColor(255,255,255);
  
  //set the font to bbalphasans or in this case fontFamily[4] from the constructor...     g.setFont(bbalphasans);     g.drawString("Hello World",20,20,g.TOP|g.LEFT);     }}
  

  and for those of you who don't like comments... just look at this code instead...

  import net.rim.device.api.ui.Font;
  import net.rim.device.api.ui.FontFamily;
  import javax.microedition.lcdui.*;
  public class BBFontCanvas extends Canvas {
  javax.microedition.lcdui.Font timesnewroman;
  javax.microedition.lcdui.Font bbalphasans;
  
  public BBFontCanvas(){
      final FontFamily fontFamily[] = FontFamily.getFontFamilies();
  
      font10 = fontFamily[4].getFont(FontFamily.CBTF_FONT, 16);
      Font.setDefaultFont(font10);
      bbalphasans = javax.microedition.lcdui.Font.getDefaultFont();
  
        font10 = fontFamily[0].getFont(FontFamily.CBTF_FONT, 20);
      Font.setDefaultFont(font10);
        timesnewroman = javax.microedition.lcdui.Font.getDefaultFont();
  }
  
  public void changeFont(int fontnum){
  
      font10 = fontFamily[2].getFont(FontFamily.CBTF_FONT, 16);
      Font.setDefaultFont(font10);
      bbalphasans = javax.microedition.lcdui.Font.getDefaultFont();
  }
       public void paint(Graphics g){
       g.setColor(0,0,0);
       g.fillRect(500,500);
       g.setColor(255,255,255);
  
       g.setFont(bbalphasans);
       g.drawString("Hello World",20,20,g.TOP|g.LEFT);
       }
  }
  

  in any case this is my tutorial police and I currently have surprising good labour code. I am so happy to finally use the blackberry fonts and it proves just everyone and everything that can make an application user interface, unless of course the components made... a midlet can do as well on a blackberry.

  They don't call it Java for nothing, if you know the ins and outs, it's like a cup of coffee it'll get you WIRED!

  Take advantage and ask me questions if you cannot get the fonts you want. This should solve any problems for those of you who have worked hard on your midlets and problems of police... and for those of you who are lazy... Simply change the default system font, and all will be the police.

  -JLover53

• Contacts from blackBerry - small fonts - any way to more Smartphones?

  Hi everyone, I just received my BB Storm and enjoy it so far. I searched this forum and was surprised that I couldn't find a question like this:

  In my contacts, I have a number of people who have multiple phone numbers. When I click on someone who has a Let's say three numbers, I am shocked by the way that 95% of the screen is pure white and the three numbers are in small font scrunched up at the top of the screen. I have small hands and I have a lot of trouble to click on number I want to call. It's mostly a question if I'm in the car, because there is no way that I would feel comfortable clicking on a name and then try to be accurate by clicking the number I want to call. Is there a way to make these bigger numbers? It is not sensible for the numbers to be at the top of the screen in such small font when there is all this emptiness... I hope there is a way to space out the numbers or at least make the largest.

  Thanks for any help, and I look forward to being an important member of this forum.

  Hello and welcome!

  All that white space is for the fields in the contact for which you have no data... work address, address of home, notes, etc. etc. etc. There are a lot of fields, to be sure. You have two options, I think.

  1. To enlarge the font size, you will be enlarging for everything. Go to Options > keyboard/screen and increase the font size there.
  2. An alternative is to, when you have the contact open, click on the button (the button to the right of the green phone button) BB. The pop-up menu will be "Call Work", "Call Home", etc. selecable from there.

  Good luck!

• Too small fonts in menus Dreamweaver's own superior?

  I asked support about this yesterday. They have not a solution. Maybe someone here have it... :-)

  I think that the the menu in Dreamweaver have a very small font in the menu above (as I have a 1980 screen x 1020). How can I get a larger font without setting my screen (1600 x 900)? I use Dreamweaver and the most recent version.

  Unfortunately, the latest & greatest DW does not support screens high resolution still.  To do this, we asked (see the link below to vote).

  Hiring views

  Nancy O.

• RoboHelp 7 install problem small fonts

  I have a very strange Setup with Robohelp 7 issue. When I try Robohelp 7 on one of the 2 Windows XP workstations or a post Vista, the HTML editor displays to small fonts. The font that I usually use is Arial-10 and it is very small in the editor. When I zoom in there get very ugly (letters glued together).
  Install Robohelp 7 on a VMWARE box works very well. The editor displays a normal Arial-10.
  Reinstall on my computer of Windows XP's standard developer again creates a readable hard small do. Even with small fonts, if I generate a CHM of Robohelp 7 file, this file shows perfect 10 Arial normal police. But in Robohelp 7 HTML editor continues to show a small Arial font, it is impossible to work with.
  I tried all the usuall stuff (clean, reinstall, disabeling / everything turn on developer machines) but the problem persists (on XP and VISTA). The only common thing with all the machines, it is that they Adobe Acrobat 8 standard installed. Finally, all the machines I've tried run Robohelp x 502 perfectly and I never had a problem with police before.
  I'm puzzled. Anyone any idea what this might be / what I might try?
  Thank you very much
  -Peter-

  I found the problem! There seems to be a bug of serieus in Robohelp 7. When you set windows to the Americans or British, formats number, everything works normally. When you set windows to Dutch digital formats, you get a microfont in HTM editor and the error messages such as 'several values were found for the margins' on various places in the program. My bet is that Robohelp is not correctly interpret numbers with commas as decimal points.

• VERY small fonts after update in some message windows and text boxes

  After I downloaded an update, there was a problem with the small text in some programs, for example and the boxes in Yahoo messenger, the popular I talk with texts are VERY small. When I go to stop, in the dialog box, the text is VERY small. Need a fix.

   

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• After Windows Update July 2011 Vista - now smaller font size

  original title: updated July 2011 Windows Vista

  Last night I got a Windows Vista update automactic. This morning after turning on the computer, I noticed that the size of the police has changed and my icons have been moved around. I could care the icons, but I can't stand the smallest text! I tried to change my resolution-everything that I tried looked horrible. I also tried control + / and when I did that everything was too big! Help!

  Hello

  There are a number of things to try:

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  __________________________________________________________

  or try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  ________________________________________________________

  and change how to get updates for you to choose what you install to stop it happening again

  You may need to install one at a time to find the problem, we

  Make sure that you do not use Windows Update to install the drivers of 3rd material part

  Find them directly in the hardware manufacturer

  and when you see the problem update right click on it - UAC prompt - then hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.