If I switch to Windows 7, my hpc750 printer will be compatible?

I currently have XP

According to HP, it works with Windows 7. There are some limitations - please read the FAQ at the bottom of the page linked below.

How to install the HPC 750 printer in Windows 7:
http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01796879&cc=us&DLC=en&LC=en&OS=4063&product=57769&sw_lang=

Tags: Windows

Similar Questions

  • HP1280 driver for windows 7 - is a printer available or compatible?

    HP1280 driver for windows 7 - is a printer available or compatible?

    I have had no luck with 1220 series.

    Hi Cchriso,

    You should be able to use the Windows Vista drivers for the 1280. I don't know if you have 32 bit or 64 bit, then here is a link to both:

    Drivers Vista 32 bits for the HP Deskjet 1280

    Drivers Vista 64 bit for the HP Deskjet 1280

    For more information, see this thread:

    http://h30434.www3.HP.com/T5/other-printing-questions/Windows-7-64bit-driver-for-HP-1280-DeskJet/TD-p/567129/page/2

  • HP LaserJet 1018 on Windows 7 / 32 bit: printer will not print

    My HP LaserJet 1018, running off my Acer laptop with Windows 7 Pro 32 bit, stopped working without known reason.

    I did the following to try to resolve the problem:

    * Check the cables and connections. These work, I think. Shoes printer green light.

    * I deleted the spoooler of local print.

    * I tried the troubleshooting feature.

    * I uninstalled and reinstalled the printer with the HP disk.

    * I rebooted the computer and the printer several times.

    * I have updated the latest version of the software on the HP site.

    None of the above seems to work.

    When I open a document and select print, it says that the printer is ready (Green Tick).

    However, it does not print even if the printer is connected and the green light on the printer itself is a steady green.

    When I check the icon of the printer on the bottom of my screen, it says that there are no print jobs in the queue.

    My last resort is now going through a new cable or call a computer scientist on the spot. I work for myself and really don't want to bear the cost.

    Any suggestions? Advice?

    Thank you!

    Thanks a lot 8lives for getting back to me.

    I managed to solve the problem in the last hour or two.

    That's what I did:

    * Cable USB purchased and attached

    * In the Windows devices and printers, I chose to remove the HP printer

    In the programs I uninstalled a PDF printer at random, I found

    In programs, I uninstalled the HP printer and enabled the computer restarts

    To restart the computer, the computer recognized and installed an HP printer and USB port without putting me the drive back in, and the printer worked.

    That may help a user in the future.

    But thanks again for your response, it is appreciated.

  • Reference Dell 926 printer will not print after installing Windows 7

    After the upgrade to Windows 7 my 926 printer will not print. I followed the suggestions found here (unplug the printer on the wall, remove the brick, low load patch R166248 to delete the printer, the latest driver to load, R146832 dated 26/01/07, reboot). Restarts, driver going through complete installation process then I get an error at the end of the process, "the Dell Photo 926 Printer printer driver is not installed". I did this several times. In addition, I restarted the spooler to print several times. No luck. Additional suggestions on how I can get my 926 to work with Windows 7?

    Greg,

    I think that we all regret our first wedding, well most of us.

    Removal of print jobs is a way of really nice to get rid of your documents. After you restart your computer, you should be able to run the fix, Manual printer removal driver and restart once more. Try it to install the Vista drivers in compatibility mode, I used Vista SP2.

    Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Change Vista compatibility. Then, install the appropriate drivers. You will be asked when connect (printer)

    To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

    Rick

  • Firefox loses focus of the window when I switch to Windows user accounts

    If I have Firefox running in a single Windows account and switch to a different account (where I do not use Firefox) and then back to the account where Firefox is running, and I have to open a new window in Firefox, Firefox loses focus (in other words, I can't use the new window unless I first bring back highlight on the desktop.) ... and, no, it's not a Windows problem, as another program will include an expected. It's just Firefox that does this. Very annoying, btw.

    [Oh and mods, please reopen my previous thread, I wasn't done with it, thank you.]

    I tried Flash 15 and blow me over with a feather, it works! Adobe * actually * fixed something to change. * faints *.

  • Sony Vaio VPCY2190X. Can I switch from Windows 7 to Windows 10 factory?

    Sony Vaio VPCY2190X. Can I switch from Windows 7 to Windows 10 factory? Page Web de Sony info is not clear to me on the issue of whether I can do it again.

    On the right side, he is saying

    DO NOT UPGRADE YET.

    To ensure that your VAIO PC works with Windows 10, it is strongly recommended that you wait to upgrade your PC until the drivers are ready.

  • Switching between Windows Windows Vista

    Windows vista has a program that switches between windows, which is pretty cool, but it doesn't work when I try to enter a shortcut key.

    Help?

    Salvation 666

    Thanks for the interesting article!

  • switch between windows 10 & OS mac pro book

    How to switch between windows 10 & OS on mac pro book

    You install Windows using Boot Camp Assistant or using a virtual machine, Parallels, Fusion, or VirtualBox.

    If the Boot Camp Assistant served as you switch between Windows and OSX in shutdown and restart the computer while pressing the option key. When the Boot Manager appears you choose the operating system you want to start. More info here: http://www.apple.com/support/bootcamp/

    If you have installed Windows on a virtual machine, you start the virtual machine in OSX and select Windows. More info on the sites of Parallels, Fusion or VirtualBox.

  • Can I switch from Windows XP to Windows 7 by installing Windows 7 without uninstalling XP?

    Original title: improvement of the operating system.

    Can I switch from Windows XP to Windows 7 by installing Windows 7 without uninstalling XP?

    Yes, and in fact you must do in order to qualify for the upgrade price.  You must realize, however, this update of XP to 7 involves a "custom installation" - that is, you must save your data first (on external support) and to reinstall all your applications after that Win 7 is running.

    Under certain circumstances, installing Windows 7 might create a windows.old file, but it's not clear to me what is stored in memory in the transition from XP to 7. you will certainly be able to run one of your older applications without having to reinstall them.  See, for example, http://www.chron.com/business/silverman/article/Going-from-Windows-XP-to-Windows-7-It-s-not-1609463.php

  • I want to restore switch between windows and display the desktop icon

    a few days before these two icons was actually on the task bar and now I have deleted how restore it back
    (switch between windows and display the desktop icon)

    Hello

    Copy the new:

    C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

    To your user account to:

    C:\Users\launch of \AppData\Roaming\Microsoft\Internet Explorer\Quick

    Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

  • Lack the "Switch between Windows" button in my Quick Launch toolbar

    From: Daz 150969

    I don't have the button tab in the taskbar in order to operate the Aero of the computer part. My card under windows is 5.9. I can run aero if one press tab, ctrl and windows key and it work very well, but I think that there should be a button on the tab in the taskbar?

    From: Andrew McLaren

    The "Switch between Windows" button in the toolbar quick launch is enabled by a file called "Window Switcher.lnk" in your Quick Launch folder. If this file is missing, the icon does not appear in the Quick Launch toolbar.

    You are probably missing this file and need to replace it.

    You can get a copy of the original file here:

    "C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch\Window Switcher.lnk"

    This place is normally hidden in Explorer (you won't see it).

    To put it on your own toolbar quick launch, go to a command prompt and enter these commands (replace "" with your real username, of course!  :-) -

    C:\>CD C:\Users\\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

    C:\Users\launch \AppData\Roaming\Microsoft\Internet Explorer\Quick > copy "C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch\Window Switcher.lnk.

    You should see a "1 file (s) copied" message when the file is copied successfully. Then type "exit" to exit the command prompt.

    The "Switch between Windows" icon now needs re - appear in your quick launch menu.

    It will be useful,

    --

    Andrew McLaren
    amclar (at) optusnet dot com dot to the

    Another response of the community of Windows Vista discussion groups

  • Switch between windows missing feature

    I have Vista Ultimate and have constant blue screens - about a week.  Whenever switch between Windows function disappears until I have to restore the system to an earlier date.  Now it dioesn can't work not at all. I found a way to install the shortcut, but the program seems to have disappeared completely.

    I have Vista Ultimate and have constant blue screens - about a week.  Whenever switch between Windows function disappears until I have to restore the system to an earlier date.  Now it dioesn can't work not at all. I found a way to install the shortcut, but the program seems to have disappeared completely.

    RE: Option to switch User
    See if this tutorial is of no use to you:
    http://www.Vistax64.com/tutorials/89939-fast-user-switching.html

    t-4-2

  • lost the "switch between windows" button on the Quick Launch toolbar

    Hi, I lost the "switch between windows" button of the toolbar quick launch, how can I restore it?

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Dasepo salvation,

    Here are the instructions for the program shortcut "switch between windows" returned the fell on the Quick Launch toolbar:

    First of all, make sure you that you must show hidden files and folders active. Here's how:

    Go to: Start/Control Panel folder Options/configuration and select the 'view' tab select "Show hidden folders and files under the section files and folders hidden from advanced settings".

    Then you can get the file from quicklaunch default section. This location of file is here:

    C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

    You can paste this link into the search bar (Ctrl-Esc). When you get to this place, you will find the 'switch between client.lnk' which you can then drag directly to the Windows Orb and it going bust in the Quick Launch bar.

    Hope this helps,

    Steve <> Microsoft Partner

  • Switch from Windows Vista to Windows 7

    Dear all,

    I had Windows Vista installed on my laptop, but unfortunately lost the c: / and the license code for this.

    Question: can I uninstall what remains of Windows Vista on my laptop and install Windows 7 on it. I still have a license of the latter and I expect long term to be able to switch to Windows 10, free of charge.

    Please can you let me know what you think about this?

    Kind regards

    Friederike

    First of all, note that there is no way to uninstall any version of Windows. They only way to get rid of Vista is to format the drive, for example by installing another operating system itself. A clean install means that you will lose the entire computer, including all your personal data, so until this don't forget to make a backup of all your important files n external media.

    Secondly, you say that you have a license for Windows 7, but how did you? If you bought a copy retail, fine. But if it's an OEM copy (for example, if it came with another computer) you can not do this.

    Finally, note that the period for a free upgrade for Windows 10 expired on July 29.

  • How to switch from windows 7 to windows 8 without a product key.

    How to switch from windows 7 to windows 8 without any product key

    Hello

    Sorry, you have problems with the upgrade to Windows 8 or want you that Windows 8 free? You can't get Windows 8 free. If you try to install Windows 8 via disk then please see this page:

    http://answers.Microsoft.com/en-us/Windows/wiki/windows8_1-windows_install/download-a-bootable-Windows-81-disc/17207153-902f-4b94-bf95-85ab70ca7064

    If your current Windows 7 PC is readable for 10 Windows PC; You can upgrade your PC for free, no hidden prices and this is a full version.

    If your version of Windows 7 Starter, Home Basic or Home Premium then your PC is promoted to 10 Windows Home.

    If your version of Windows 7 Professional or ultimate edition, so your PC is upgraded to Windows Pro 10.

    If you have any more concerns with the upgrade, see

    http://www.Microsoft.com/en-us/Windows/features

    Hope that the information was useful. If you need help more, feel free to contact me or anyone!

    RT

Maybe you are looking for

  • Approach of the album (several pieces) project?

    Hello. What is the right approach for the work of the album from? Let's say that I have several audio tracks for the album, most of the tracks have same basic settings/plugins/etc + automation. But they should sound compatible with each other and I r

  • How to delete multiple emails at once rather than individually

    I want to choose emails at random (not immediately in order) and remove with unique function. I don't want to have to remove each of the unwanted emails individually. D how is this? In addition, there no function erase at the top of email-why not?

  • Portege Z930-118 does not recognize the external USB CD/DVD drive

    My new Z930-118, with windows 7 64 bit home, does not recognize the external CD/DVD drive when I plug it into the USB port. The CD/DVD device does not even appear at all in Device Manager. The reader is a SE-S084 Samsun and works well on another lapt

  • calling external code (instead of dll lib)

    Hallo, is it possible to call external functions that reside on a static library (.lib) and not a dynamic (.dll). The "call library function node" feature seems to allow only the dll and lib steps. Any suggestion? Thank you

  • Sharing folder on the network working group

    I have 3 computers (both windows vista and windows 7). I created a group on a private network and all computers have access to the public folder, but I want to share a specific folder on both windows vista computers. How do I do that?  I can't find a