image of harvest turns a single pixel

Similar Questions

• How to get the color of a single pixel?

  Hi all.

  Part of my application is transparent. The other party is not.

  But I would like to have 'match' colors (is not very pretty orange to pink, but it's a matter of personal taste, I guess).

  That's why I need now to a background color.

  That's what I had in mind:

  Because we cannot get information about the currently active theme, I can do a screen capture and extract a single pixel of interest and get its color information. If it is green (for example) - I'll tryto use more Brown colors in my application.

  So basically, is it possible to get the color of a pixel in a bitmap (or something?)

  My last resort would be to save the Bitmap image to a file and then read that file.

  Bitmap.getARGB (int [] argbData, int offset, int scanLength, int x, int y, int width, int height)
  Gets the raw data ARGB region of this Bitmap and stores it in the table provided.

• When I use the truncation tool, select a zone and press return it removes everything except for a single pixel. This just started today. CS5, Windows 7.

  When I use the truncation tool, select a zone and press return it removes everything except for a single pixel. This just started today. CS5, Windows 7. I tried to reinstall CS5 and who did not help. I am trying to set up a new computer and installed Photo Shop CS5 on it earlier in the day. Maybe it has something to do with it. But until I get the new fully configured machine I still want to continue to work on my current machine, which is where the problem is happening.

  Hi haroldschlegel,

  Please try resetting the cropping tool

  

  Restart Photoshop once done and see if that helps.

  Kind regards

  Assani

• I have renamed lot a group of raw images and they turned to xmp files. How can I return the photos?

  I don't know what I did wrong. I have loaded a bunch of photos on my hard drive from an SD card. I've renamed bridge of lot. Somehow all the images files ARW turned the XMP files and I do not see any of the images. I tried to delete the folder on my hard drive, then reloaded my SD card. Half of the photos are back, but half of them are still just the xmp. And some have simply gone all together. I checked the trash. Isn't there. What can I do? Now, my card is too empty.

  Post a screenshot of footage as xmp

  Check what size these xmp files are.

  Bridge cannot delete files in all, but if the files are name and file extension changed, the files will not be recognized in any application

  Solution is to add the same file name extension

  ~ Assani

• How complete or clear a single pixel?

  What tool or tools should I use to clear or fill a single pixel at a time?

  Sincere thanks for yourhelp in advance.

  Al

  Many ways; You can use one or a combination of:

  Brush tool set to 1 pixel and a color that corresponds to the zone

  Spot Healing Brush Tool set for all about 3 or 4 pixels

  Clone Stamp Tool affect a reasonable size based on the area and a soft edge (a tablet like Wacom is a great help here because she has been able to define the size and opacity, the stylus pressure determines the size or the opacity as you paint)

• as I am sensitive to flashing images can I turn off blinking animations

  Blink quickly affect images me and it worries me that some may cause seizures, I can turn off the flash animations? It would be useful for sensitive people.

  For example my email page email providers had Jackpot.com ads with flashing quickly images that are bordering on the subliminal, other advertisers make this type of ad, so they would not be allowed on TV because of the risk so he could give Firefox users if they could turn the animations flash with an on/off switch.

  This isn't for lack of Firefoxes somehow, I install Firefox on all my computers, because it surpasses everything else I've tried.

  Install Adblock Plus from here: https://addons.mozilla.org/en-US/firefox/addon/adblock-plus/

  Subscribe to the "Easylist" when you see the menu and then go to the list of subscriptions: http://adblockplus.org/en/subscriptions

  At the foot of the page in the "Miscellaneous" menu, click on the link to subscribe to areas 'Malware' which will filter the malicious sites as well.

  To become familiar with the application, go here: http://adblockplus.org/en/getting_started

• When I open the thumbnail images in another tab they are pixelated, what's the problem?

  When I go to a website with pictures they are pixelated. Placing the cursor over each image the gives me the ability to press 'alt' and 'r' to refresh the image or 'alt' and 'a' and refersh the entire page. When I open an image of thumbnailed in a new tab, if yes or no I refreshed the page or the image beforehand, the image is pixelated and I can not 120 Hz it. What is going on?

  This has happened

  Each time Firefox opened

  Looks like you are using a dial-up with a 'Accelerator' connection If this is the case, it's a feature of this ISP web accelerator. They accelerate the loading by initially providing lower quality images and giving you the option of loading the original image, full resolution in their cache with shortcuts for the page. Other ISPS with a web Accelerator feature using elements of context menu, which are added to Firefox via an extension installed in Firefox.

  Insofar as not having is not able to load the image quality when you open it in a new tab, I don't know why that option does not appear. You must contact your ISP support for questions on this issue.

• How can I place an image in a report without getting pixelated

  Hello

  I create a my program using NIReport report. In my report, I have graphics and images that are placed in the report. My current method uses a bitmap to take a screenshot of the active view of a control, and then using this bitmap to create a JPEG file and add that file to the report. However, graphics and pictures are very blurry and pixelated. Is there another way to add a picture or graphic to the report?

  The nirconvertsample.cws example seems to have images in the table for NIReport. You can dig through this code example to see how they do.

• Why my corrected image has non-uniform scaling (mm/pixel)?

  I use Vision tools of OR to calibrate nonlinear distortions by imaging a calibration of the spoaced points unfirmly image.  I have spread this information of calibration to calibrate a series of images taken under the same conditions as my calibration grid.  Then, I need to correct these images before I can make dimensional measurements. (Due to the nature of the processing routine measurement I need that these images corrected first).  I also need to enter the actual conversion to the images corrected to this measure of processing routine.  I get this by using the Pixel convert to real World.vi for each pixel in the image in order to see any variability within the image. I suppose this conversion value is consistent thoughout the picture but it isn't and ranges from 10%.

  Can anyone help explain what might happen?

  Secondly, in the correction of my images I only have the interpolation methods: zero order and bilinear.  Quadratic and cubic splines are grayed out.  Not sure why this is?

  Thank you

  Dan

  Another detail - calibration results NOR are valid within the calibration grid.  The numbers get anywhere outside the grid.  They get also a little wacky on the borders between the boxes.

  Loop through each pixel is a way to do it, but it is slow.  The only other possible approach I can think of is to map the image to a corrected image.  You can see distortions in this way, but you wouldn't have measurements for them.  I might consider to check every pixel on the other, given that the scale factors are not changing too quickly.

  Bruce

• Image and graphics on a single screen

  I acquire an image from a laser of a camera and find elliptical adjustment for the image. Now I have a separate Image out of the camera and a XY chart that gives the elliptical for my image. I would like to place my elliptical fit in the image. Since both are different outputs, graphic mixed is not workinf for my application. What will be the best method to merge these two outputs and show as a parade of single output.

  Thank you

  Simple example, 8.0.

• When I edit my images when I turn the after he makes the changes and said save diappears and I can't find it in the folder where it was to...

  recently, after I take or load images and I have change in my photos when I turn the after he said save diappears and I can't find it anywhere. It never did this before until now. I did not any changes that I know or all the parameters and I'm trying to fix this cause if I do they are gone. they did not move to another folder or the trash either...

  The files may be hidden.  Might be interesting to try
  Change the following setting and maybe photos
  Re - appears.

  Windows XP: Show hidden files

  Reach... Control Panel / folder Options / View tab.
  ... To check "Show the hidden files and folders" / apply / OK.

  Windows Vista - Show hidden files
  http://Windows.Microsoft.com/en-us/Windows-Vista/Show-hidden-files

  Windows 7 - show hidden files
  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

  If the photo thumbs reappear... they can look washed out...
  to clear this up... right click on a picture or a selected group
  or folder and choose... Properties, uncheck the box.
  'Hidden' / apply / OK.

  The following link might be worth a visit:

  McAfee - Windows 7 library files are not displayed
  http://service.McAfee.com/faqdocument.aspx?ID=TS101228

• How to change size/pixel for stock photo? I tried to upload a photo from my creative cloud library and EI, on my facebook page for a cover photo. error on facebook box shows that the image must be at least 400 pixels wide. and 150 pixels in height.

  How do change you the pixels on the photos of the reserve? I am trying to load one of my photos in the library of creative cloud on my facebook page. Error on facebook box indicates that the photo should be at least 400 pixels wide 150 pixels high... Thank you

  For me it looks like you are trying to download the thumbnail image and not the actual image.

  Download them using the method in the screenshots in this link: I downloaded my 10 free images and they all have the Adobe watermark on them, so I can't use them. Why do they have a watermark on them?

• Images of black turning Lightroom

  I have the new lightroom

  and today, I imported a few images, but then they started to turn black

  Hi simong

  Please refer to that appear black in Lightroom CC 2015.2/6.2 thumbnails

  For existing photos, select all your images in the grid view, and then click the Reset All button in the Quick develop Panel. Then click on the auto tone button to correctly apply this feature.

  

  

  Concerning

  ~ Assani

• How can I check the number of pixels in my image of the camera? [was: Pixels]

  How can I check the number of pixels in my image of the camera?

  

  Open a file

  Select > all

  Choose the histogram and click in the upper right

  Choose expanded view

  The number of pixels note

• Reduce the size of the image file for web use without pixelation

  Can someone help me understand how to better reduce images for fast loading (in slide shows in Muse) web. I did save it to the web in PS and they are super pixelated now. The only versions that don't lose quality are of the original size, and they are large files. Any help is appreciated.

  Can someone also tell me what size each image should be, which is considered to be a too big size (KB) for web images? Thank you, Hillary

  30 quality is quite small, I would use at least 60-70, the file size should be around 100 k, which is very good to go higher up to 200 k is normal, especially with the HiDPI (Retina Display) on newer systems.