image shows not when you use the element type image display

Similar Questions

• Page tiles showing not when you use Adobe Muse and webmarketing accommodation

  Hello

  I created a muse site that has good page titles display in the browser when you use the bases web hosting. But I need the same site contains a blog now so changed hosting to web marketing, this has as consequence the pages not showing their page titles in the browser

  Does anyone know why this is, or what I can do about it?

  Thanks for any info

  concerning

  Martin

  The page title does not change with the change of site map, unless it is done manually, or if it is updated the file is downloaded from Muse.

  Please check the titles added to the page if they exist or not, there is always the same question, enter the url of the site.

  Thank you

  Sanjit

• Motion/opacity (yet) does not when you use the time remapping effect

  OK: Here's my meat. This bug has been around for CS3 and CS4. I was hoping this would be fixed with the arrival of CS5, but apparently it still has not been resolved.

  If you use the time remapping effect in the body, you can not use the other features of keyframing, such as movement or opacity. If you do, the video simply disappears. Rendering will not help either. The only way to get the opacity of the function is to overlay a video black bar on the top of the element (or any other cache of color if you like fantasy) and have the opacity on this clip in reverse work. How to get movement in these clips remapped time to work is still somewhat a mystery to me...

  Has anyone found this tedious, boring/irritating?

  So, when can dear Adobe, we expect a fix for this? If all goes well before CS6.

  Thank you very much.

  Richard

  Yes, it's a real annoying bug.
  Simple around - after work you time-remapping your clips, nest (control-click on the clip and select 'nest'), then you can change the opacity normally.

• Z500 touchpad work not when you use the keyboard. Please help me please!

  Hello

  I recently bought a lenovo z500 and it's great, but I have a little problem. When I use the keyboard to play games (I use the WASD keys) the touchpad does not, which means I can't play. Help, please!

  I got it finally started working by removing the pilot of the momentum. I don't think that I will reinstall it. Thanks for your help

• Popup not closing not when you use the < af:fileDownloadActionListener >

  Hi all

  I use JDeveloper 11.1.1.4.

  My scenario is,

  I have a popup with < af:fileDownloadActionListener > component when the user clicks the download button, it fires the file download listiner and download the text document.

  Download works fine, but after the download, I tried to close the popup, but I'm not able to close the pop-up window.  Is - this problem of file download listener?

  My JSPX codes,

  < af:commandButton text = "DwonLoadPopup" id = "cb2" >

  < af:showPopupBehavior popupId = "p1" triggerType = 'action' / >

  < / af:commandButton >

  < af:popup id = "p1" >

  < af:dialog id = resizing "pgl2" = "on" title = "Downloadpopup" >

  < af:panelGroupLayout id = "pgl3" >

  < af:commandButton text = 'Download' id = "cb1" >

  < af:fileDownloadActionListener method = "#{managedBean1.doDownload} '"

  contentType = "application/octet-stream".

  filename = "sample.txt" / >

  < / af:commandButton >

  < / af:panelGroupLayout >

  < / af:dialog >

  < / af:popup >

  Java code:

  ' Public Sub doDownload (FacesContext facesContext, OutputStream, outputStream)

  {

  String data = "download my content."

  Try

  {

  OutputStreamWriter writer = new OutputStreamWriter (outputStream, "UTF - 8");

  Writer.Write (Data);

  Writer.Close ();

  outputStream.close ();

  }

  catch (IOException e)

  {

  e.printStackTrace ();

  }

  Pop RichPopup = (RichPopup) facesContext.getCurrentInstance () .getViewRoot () .findComponent ("p1");

  pop. Cancel();

  }

  Thank you

  David.

  See if this helps: http://www.gebs.ro/blog/oracle/affiledownloadactionlistener-generate-export-and-close-popup/

• Digital background color works do not when you use the reference

  Hello

  I am trying to use a reference to change the background color of a digital indicator in a Subvi.  The sub - VI strives to change a digital indicator, but when I use a reference to another (reference Numeric.vi) VI, instead of doing all the background, the color I want, only the outline is the color I want, with the rest in white (natural color).    Is there a way to avoid this?

  You must use the NumericText.TextColors.BG property instead.

  Felix

• Firefox redirecting not when you use the script Window.Print

  Have a simple java script on a Web page to display the print dialog box before the redirection to another page.

  < a onclick = "javascript:window.print()" href ="Screen.php" > print, and continue < /a > "

  When the print dialog box will appear if you print it does not redirect but remains on the page. If you cancel printing, it will go ahead and redirect to where it is supposed to go. Worked fine before the last update I was wondering if there was a work around for this or if anyone was aware of this.

  The inconsistency is confusing. If you change your onclick to the following code, you can see a difference of synchronization in the appearance of the confirm dialog box which may be related to the problem. Maybe printing went from synchronous to asynchronous and now the navigation is attempted at a time when it is not allowed?

  onclick="window.print(); if(!confirm('Finished printing?')) return false;"

• speakers work not when you use the external monitor

  I use a laptop HP Envy and HP Pavilion 25bw external moniter connected via an HDMI cable. With the help of Windows 8.1. The sound is muted when the laptop lid is closed. If I open the lid I hear for about 2 seconds, then it turns off. If I remove the HDMI cable, the sound lights. How can I get the sound to work with the connected 25bw and close the lid?

  Hello

  Please try to hell sound HDMI playback devices

  Right click on the speaker icon,

  Select playback device

  Click with the right button on HDMI sound

  Disable it.

  Kind regards.

• Œuvres SQL query to MS SQL Server 2008, but not when you use the database kit

  I have this SQL query:

  DECLARE TABLE (@DataTypeTable)
  Name varchar (128).
  TypeID INT)

  -Add comma delimeted type data in the temporary table names
  INSERT INTO @DataTypeTable (name)
  SELECT * from WhatWeShouldDoRead.func_Split (@DataTypeTrimmed, ',')

  SELECT the name OF @DataTypeTable

  That takes a comma delimited by the string and returns the string as a table.  It works correctly in Microsoft SQL Server Management Studio.  When I run this as a stored procedure I return nothing.  There are no errors, SQL or otherwise.  I checked that I am connected to the correct database and the stored procedure is responsible without changing any error chain which is reported of this stored procedure (that code is not shown in the example above).  Has anyone seen this problem before, or have experience with SQL/Labview interfaces to tell me what I am doing wrong?

  Thanks in advance.

  
  

• When you use the Polygonal Lasso with 13 elements, I get the message 'no pixels are not selected to more than 50% ' why and how to remedy?

  When you use the Polygonal Lasso with 13 elements, I get the message ' WARNING: no pixel is selected to more than 50 percent. "  Why - and how to fix it?

  Make sure that the correct layer is selected.

  Decrease the amount of feathers.

• When you use the brush in the development module and I have a lot less brushes to create an image, the program hangs up to what I sometimes have to use windows to complete the task.  I have ICC Intel i7 3.4 and 16 GB of RAM to operate Windows 7.  Why hang

  When you use the brush in the development module and I have a lot less brushes to create an image, the program hangs up to what I sometimes have to use windows to complete the task.  I have ICC Intel i7 3.4 and 16 GB of RAM to operate Windows 7.  Why hang up LR

  Doing a lot of brushing up on an image using Lightroom is known to have this problem. The first thing to try is to turn off the graphics acceleration (go to Preferences/Performance tab and then uncheck the box here). IF this does not help, then you can consider doing your brush in Photoshop Elements or Photoshop, instead of brushing in Lightroom.

• SpeedGrade CC14 does not open when you use the "Direct Link to Adobe SpeedGrade... "of PremierePro CC14.

  SpeedGrade CC14 does not open when you use the "Direct Link to Adobe SpeedGrade... "of PremierePro CC14.

  I can open the SG of start menu/desktop computer and I can open the PP project in SG very well. The PP project contains 3 deadlines and I take one I want without any problem. Returning to the SG PP works fine as well. It seems only thing doesn't work does not automatically open the PP file and selecting the correct timeline in the Official Journal of the project.

  I had a glance at the "C:\Users\john Bishop images\AppData\Roaming\Adobe\SpeedGrade\8.0\logs\SpeedGrade.log ' but it is not updated when I try to use the link Direct from PP. command It updated when I invoke the start menu/desktop computer SG. Note that none of the other newspaper, the files are updated either (Plugin Loading.log, Database.txt Trace and Debug Database.txt). All these get updated when I run the desktop/start. It would appear that SG is not yet known.

  I uninstalled the SG and the PP and re-installed (all in the directories by default) and everything seemed to go OK but no change.

  I also added 2 political profile the NVIDIA Control Panel, just display a message when loading SpeedGrade.exe and another for a slightly different message when loading SpeedGradeCmd.exe. SG invoking the desktop/start causes the SpeedGrade.exe message to display. Using the 'Direct link' PP file option does not display anything, reinforcing my thought that SG is just never called from PP.

  SP1 Windows 7 Professional 64 bit

  12 GB OF RAM

  2-Intel Xeon E5640 (16 sons) processors

  NVIDIA GeForce GTX580 1536 MB memory graphics

  PS... I used the Adobe cleaning tool noted elsewhere and tried NVIDIA workarounds as well - all to nothing does not.

  Problem solved!

  My Antivirus software was in the way. Once I have updated, things work fine.

  Thanks for your help!

• No idea why, when you use the Source of the Image changes it overwrites the content?

  No idea why, when you use the Source of the Image changes it overwrites the content?

  Its a really great tool and I want to use it as I have a complicated trajectory I want multiple items to follow, but to have many different PNGs. but when I change them it overwrites the content?

  Thanks in advance

  Scott

  Hi, Scott.

  It is likely that you touch the question where the dimensions of the old image are used when change you to a new image.  It is a known issue for the latest version of edge animate CC and we try to fix it in a future release.  Unfortunately, the only thing you can do is to change the dimensions of the image after you exchange.  You can also copy and paste the path of an element to another, if it would help.

  Hope that helps,

  -Elaine

• Select an exact size of the image to be copied when you use the "Marquee" tool

  How can I select an exact size of the image to be copied when you use the "marquee"?...

  I like to choose a section image of 14.00 x 12,00... When you use the marquee selection tool, you can not control the mouse to select exactly 14.00 12.00 x is always a little higher or lower at 14:00 or 12: 00 am...

  is there a way that you can easily select the exact size of 14,00 x 12,00?...

  Please advise...

  see you soon,

  Hi wong168,

  You can use the fixed size option and enter the size in the input fields using the unit of measure of your choice; That is to say in, px, cm etc.

  If you right click in the entry boxes there are the list of measured values.

  

  

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software