Implementation for the Apps Error signature: "ioexception when you save the new key pair".

Similar Questions

• error code 0 x 80070017 data error cyclic redundancy when you save

  I get error code 0 x 80070017 data error cyclic redundancy when you save. Publication solutions (error checking - automatically fix files) have not worked. Help!

  Hello

  1. When you save the backup?

  2A it worked fine earlier?

  This error occurs if the hard disk has errors on this subject.

  I suggest that you run a check disk on drive c and then try the backup.

  You can help solve some computer problems and improve the performance of your computer by making sure that your hard disk has no errors.

  a. open the computer by clicking the Start button, click computer.

  b. click the hard disk you want to check, and then click Properties.

  c. click on the Tools tab and then, under error-checking, click check now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that detects the scanning, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix file system errors and Scan for and attempt recovery of bad sectors.

  d. click Start.

  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  
  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  
  Back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  
  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

• I get an error code 0 x 80070017 data error cyclic redundancy when you save.

  Original title: Trouble when backup Vista basic

  During the backup, I get this message... Verification of data error: 0 x 80070017 cyclic redunancy. The backup fails. Any advice? Thank you...

  Hi Arctical,

  ·         When you save the backup?

  ·         Has it worked fine previously?

  This error occurs if the hard disk has errors on this subject.

  I suggest that you run a check disk on drive c and then try the backup.

  You can help solve some computer problems and improve the performance of your computer by making sure that your hard disk has no errors.

  a. open the computer by clicking the Start button, click computer.

  b. click the hard disk you want to check, and then click Properties.

  c. click on the Tools tab and then, under error-checking, click check now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that detects the scanning, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix file system errors and Scan for and attempt recovery of bad sectors.

  d. click Start.

  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

   

  Back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

   

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  I hope this helps!

• Help! No one knows what to do when you get the "error Code 2" when you save a document?

  I worked for HOURS and in the end saved some pages of my book as a pdf document, BUT, for some reason, this time above the pdf never showed up! I checked background tasks and he said 'save pdf - 32% '. Because it was taking so long, I left it all night in the hope that it would end on its own. This morning, he said the same thing.

  The problem is now, Indesign is frozen (not answer) and my task manager it will not make it appear. I copied the file, so there is a backup, but the file last saved at 22:45 last nite - so probably this is the file corrupted.

  I have read other forums & troubleshooting pages on this subject, but there is no suggestion on what to do when your program is unresponsive. So I thought I would ask here!

  Any suggestions on what to do next without losing all my work?

  THANK YOU :-|

  You might not like, but try a force quit on ID, or shuts down the computer, assuming that you have not already closed ID.

  Re-booting, then restart ID and I hope that the file will be reopened automatically the data recovery.  Try immediately save money for a new file name, and then export to .idml (you have not told us your OS or the ID version, that we really need to know, but says bottom CS5 or most recent task and the Task Manager indicates a version of Windows). This does not work very well. Error code 2 is generally not recoverable, in my view, directly in the code.

  You should certainly also try to open the saved copy and do the same steps. If you can get a .idml one, which open and save it as another .indd file and I hope it will be good to go. You can also clean the file by exporting InDesign tag text stories and import it into a new document.

  If all else fails and you absolutely positively need to recover rather than rebuild it, you can try the recovery of Markzware service: Bad InDesign or Quark File Recovery submission form

• Error ORA-20001 when you create a new application

  Hello
  I am creating a new application of an existing table in the database and I get the following error. The application is created using the Wizard (type of database application, from scratch, report and our page)
  
  ORA-20001: unable to create modules. ORA-20001: create error pages. ORA-20001: unable to create form page. ORA-20001: Error Page = 2 item = 'P2_NON_ORACLE_EMPLOYEE_SPEAKER' id = '1975288532127294112' ORA-20001: error page 2 item = = "P2_NON_ORACLE_EMPLOYEE_SPEAKER" id = "1975288532127294112" a same name something like existing at the level of applications. ORA-0000: normal end successfully
  
  The table I created the app on is defined as follows:
  

  CREATE TABLE  "TABLE_1" 
     (    "ID" NUMBER, 
          "SESSION_EXTERNAL_PAPER" VARCHAR2(30), 
          "OWNER_CFP_SUBMITTER1_FULL_NA" VARCHAR2(255), 
          "OWNER_CFP_SUBMITTER1_COMPANY" VARCHAR2(255), 
          "STATUS" VARCHAR2(30), 
          "SESSION_ID" NUMBER, 
          "TITLE" VARCHAR2(255), 
          "ABSTRACT" VARCHAR2(4000), 
          "SESSION_TYPE" VARCHAR2(30), 
          "SESSION_CATEGORY" VARCHAR2(30), 
          "STREAM" VARCHAR2(30), 
          "PRIMARY_TRACK" VARCHAR2(255), 
          "OPTIONAL_TRACK" VARCHAR2(255), 
          "CROSS_STREAM_TRACK" VARCHAR2(30), 
          "SUPPORTING_VIDEO" VARCHAR2(4000), 
          "ATTENDEE_ROLE" VARCHAR2(255), 
          "TO_RATING" VARCHAR2(30), 
          "TO_COMMENTS" VARCHAR2(4000), 
          "COMMENTS" VARCHAR2(4000), 
          "ORACLE_PARTNERNETWORK" VARCHAR2(30), 
          "IS_YOUR_OPN_MEMBERSHIP_UNDER_A" VARCHAR2(255), 
          "ORACLE_PARTNER_TYPE" VARCHAR2(255), 
          "OPN_MEMBERSHIP_LEVEL" VARCHAR2(30), 
          "ORACLE_REGION_BASED" VARCHAR2(30), 
          "ORACLE_VALIDATED_INTEGRATION" VARCHAR2(30), 
          "HAS_YOUR_COMPANY_ACHIEVED_SPEC" VARCHAR2(4000), 
          "PLEASE_DESCRIBE_THE_VALUE_OF_O" VARCHAR2(4000), 
          "INCLUDE_CASE_STUDY" VARCHAR2(30), 
          "PROVIDE_NAME_OF_THE_CUSTOMER_F" VARCHAR2(255), 
          "PLEASE_PROVIDE_A_BRIEF_DESCRIP" VARCHAR2(4000), 
          "NON_ORACLE_EMPLOYEE_SPEAKER1_F" VARCHAR2(255), 
          "NON_ORACLE_EMPLOYEE_SPEAKER1_C" VARCHAR2(255), 
          "ORACLE_EMPLOYEE_SPEAKER1_FULL" VARCHAR2(255), 
          "ORACLE_EMPLOYEE_SPEAKER1_COMPA" VARCHAR2(255), 
          "NON_ORACLE_EMPLOYEE_SPEAKER2_F" VARCHAR2(255), 
          "NON_ORACLE_EMPLOYEE_SPEAKER2_C" VARCHAR2(255), 
          "ORACLE_EMPLOYEE_SPEAKER2_FULL" VARCHAR2(255), 
          "ORACLE_EMPLOYEE_SPEAKER2_COMPA" VARCHAR2(255), 
          "NON_ORACLE_EMPLOYEE_SPEAKER3_F" VARCHAR2(255), 
          "NON_ORACLE_EMPLOYEE_SPEAKER3_C" VARCHAR2(255), 
          "ORACLE_EMPLOYEE_SPEAKER3_FULL" VARCHAR2(255), 
          "ORACLE_EMPLOYEE_SPEAKER3_COMPA" VARCHAR2(255), 
          "NON_ORACLE_EMPLOYEE_SPEAKER4_F" VARCHAR2(255), 
          "NON_ORACLE_EMPLOYEE_SPEAKER4_C" VARCHAR2(255), 
          "ORACLE_EMPLOYEE_SPEAKER4_FULL" VARCHAR2(255), 
          "ORACLE_EMPLOYEE_SPEAKER4_COMPA" VARCHAR2(255), 
          "CREATED" DATE, 
          "CREATED_BY" VARCHAR2(50), 
          "LAST_UPDATE" DATE, 
          "LAST_UPDATED_BY" VARCHAR2(50), 
           CONSTRAINT "OOW_PAPER_PK" PRIMARY KEY ("ID") ENABLE
     ) ;

  I use APEX version 4.0.2.00.07
  
  Any idea what could be wrong and what can be done to solve the problem?
  
  See you soon,.
  Andy

  If you add a synonym for display to the database, the generator must see and allow you to use...

  Thank you

  Tony Miller
  Webster, TX

  Never argue with a fool. They do you drag down to their level, then beat you with experience.

  If you answer this question, please mark the thread as closed and give points where won...

• I get the error message: 1 when you try to download the creative application of cloud. I tried rerun the installation and use of the cleaning tool. I can not uninstall and reinstall the app because there never have down loaded initially.

  I get the error message: 1 when you try to download the creative application of cloud. I tried rerun the installation and use of the cleaning tool. I can not uninstall and reinstall the app because there never have down loaded initially.

  Try with the solution provided in the link below:

  ERRO 1: Creative cloud cannot install

• I have error code 8024200d when you try to update and install SP1 for Vista

  I have error code 8024200d when you try to update and install SP1 for Vista. I'm currently running Vista Ultimate. Any help would be appreciated.

  Thank you!  Matt

  Matt,

  The 8024200d result code indicates WU_E_UH_NEEDANOTHERDOWNLOAD
  Update Manager did not install the update because it must be downloaded again.
  Suggest you download and Save the complete stand-alone package of Vista SP1.

  Links to the standalone versions are on this page because you validate that the edition of Vista is x 86 (32-bit) or x 64 (64-bit). You can see the architecture of the system of opening in the Panel and next to the search System system type: Windows Vista Service Pack 1 (SP1)

  Before attempting to apply the SP1 please consider this information-

  If you choose to install Windows Vista SP1 via the standalone installer available on the Microsoft Download Center, Microsoft recommends that you first check Windows Update and install all drivers in option. Read the Articles in the Knowledge Base 948187 and 948343 for more information.

  Suggest you to create a folder on the root drive (the drive where Windows is installed, usually C:\) and name SP1.
  Move the downloaded Service Pack in the newly created folder.
  Disconnect all the devices, printer, external USB hard drive, etc.

  Then, Configure the system starts in a clean condition
  After you restart the worm as a clean boot, apply SP1.

  If there is still a problem with the installation of SP1, MS offer support chat and free e-mail to "help you to download and install service packs" here-
  Microsoft technical support

  Or, you can post here - MowGreen Windows Vista Service Packs/Windows Server 2008 Service Packs Windows IT Pro - consumer safety Expert

• Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

  Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

  I've read other discussions on error code 80242FFF.  Based on suggestions from Microsoft technical support, I tried Mncrosoft Fixit.  Also, I started my computer in mode safetboot and tried to update.

  They did not work.  So, will you be able to help me find a solution?

  Thank you

  Ken

  Hello

  1. is that the copy of windows is enabled?

  2 is the issue limited to the installation of a security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)?

  I suggest to perform the steps in the following article and check.

  Method 1: run the Windows update troubleshooting tool and check.

  The problem with Microsoft Windows Update is not working http://support.Microsoft.com/mats/windows_update/

  Method 2: I suggest you to put the computer in a clean boot state and check if Windows update installs successfully.

  To help resolve the error and other messages, you can start Windows vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below for more details:

  How to troubleshoot a problem by performing a clean boot in Windows vista and windows 7:
  http://support.Microsoft.com/kb/929135

  
  Note: When you are finished troubleshooting, follow these steps in the section above to reset the computer to start as usual.

  Method 3: If the problem persists, follow the steps in the following article.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

   

  Note:

  un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ( )

  How to back up and restore the registry in Windows

  b) while running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  For reference:

  0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414

  Note:

  un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ( )

• getCustomDatum not implemented for the oracle.jdbc.driver.T4CNamedTypeAccessor class

  Hello world

  running mapviewer Ver11_1_1_7_3_B140717 we met the error above in newspapers trying to create maptiles.

  Installation program:

  -Table with a column of type ordimage (no available georaster here, we have to keep the files in the file system)

  -Spatial index for column in mbr, metadata are

  -All the files using the 31466 (Gauss-Krueger 2) coordinate system

  -Image theme in mapbuilder shows images

  -Bottom of mapbuilder card shows images

  Trying to create the maptiles by using mapviewer administration - manage tile layers creates the above error (same details in the excerpts above).

  AM PIZZABOTEN: Query [p ImageTheme] = SELECT ROWID, RAS_DOB MBR WHERE MDSYS. SDO_FILTER (MBR, MDSYS. SDO_GEOMETRY (2003, 31466, NULL, MDSYS.) SDO_ELEM_INFO_ARRAY (1, 1003, 3), MDSYS. SDO_ORDINATE_ARRAY(:mvqboxxl,:mvqboxyl,:mvqboxxh,:mvqboxyh)), 'querytype = WINDOW') = 'TRUE' AND (pyramid = 25)

  August 14, 2015 15:36:37 oracle.sdovis.theme.ImageThemeProducer loadImagesFromDBCached

  FEINER: Fetch size: 100

  August 14, 2015 15:36:37 oracle.sdovis.theme.ImageThemeProducer loadImageBlock

  AGAIN: Ungultiger Spaltentyp (invalid column type?): getCustomDatum not implemented for the oracle.jdbc.driver.T4CNamedTypeAccessor class

  August 14, 2015 15:36:37 oracle.sdovis.theme.ImageThemeProducer loadImagesFromDBCached

  WARNUNG: unable to load keyframe: AAAVuOAAMAAAACFAAB

  August 14, 2015 15:36:37 oracle.sdovis.theme.ImageThemeProducer loadImagesFromDBCached

  INFORMATION: Exec sql [RAS_DOB_2014_TEST] time: 7ms, 0 images of loading time: 1 ms.

  August 14, 2015 15:36:37 oracle.sdovis.DBMapMaker renderEm

  INFORMATION: * the time spent on the loading features: 14ms.

  MapTiles records only show the background color.

  Has anyone else experienced this problem?

  Best regards

  NilsO

  Hi Nils

  12.1.3 WebLogic jdbc libraries are located in the MW_HOME/oracle_common/modules/oracle.jdbc_12.1.0 directory level.

  For this WLS jdbc driver is ojdbc7.jar which is loaded on startup of WLS.

  As mentioned on the post preceding this is is not compatible with the 11.1.1.7.3 MapViewer to display the ORDIMAGE. Seems that even the ojdbc6.jar that exists in this directory cannot be used.

  What to do is make the WLS Server uses the ojdbc6.jar for 11.1.1.7.3. There are different ways to use a different pot in WebLogic.

  This page http://docs.oracle.com/middleware/1212/wls/JDBCA/third_party_drivers.htm was noted in this regard.

  As a quick test, you can try to make the ORDIMAGE with the following steps;

  (1) on page MapViewer OTN, Oracle Fusion Middleware MapViewer access downloads and download the quick start for the 11.1.1.7.3 Version.

  You will find the glassfish3/glassfish/domains/Domain1/lib folder a file jdbc ojdbc6.jar.

  (2) on your installation of a WebLogic domain:

  Navigate to the oracle_common/modules/oracle.jdbc_12.1.0 directory

  make a backup of ojdbc7.jar

  copy the ojdbc6.jar on top of ojdbc7.jar

  (3) start Weblogic server and try to make your theme ORDIMAGE.

  As I mentioned before, there are different ways to add a jar to WebLogic classpath. The quick test above is just replace the original ojdbc7.jar in a facility that is not good, as you lose you original ojdbc7.jar.

  Best regards.

  João

• I allowed to CS2, I contact Adobe support for new link and new key for the new facility for the computer updated. In the installation, I have inserted the key from ADobe that I got Adobe support, but when I open programms CS2 it will not work and gives me

  I allowed to CS2, I contact Adobe support for new link and new key for the new facility for the computer updated. In the installation, I have inserted the key from ADobe that I got Adobe support, but when I opened any CS2 program it will not work and gives me the invalid key error. What should do?

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

• Adobe CC will not update my Photoshop and Lightroom for the new 2015 CC, it fails at 43% every time and gives an error code of 50

  Adobe CC will not update my Photoshop and Lightroom for the new 2015 CC, it fails at 43% every time and gives an error code 50.

  Hi Gregory,

  Please refer to the threads below to resolve the error code 50:

  Which is updated CC 50 error Code?

  Setup error - code error 50 creative cloud.

  You can also try to download the app from the link below:

  Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools

  * Be sure to read the important Instructions before downloading *.

  Kind regards

  Sheena

• That means the (B) the acronym for when you enter a new task start Date?

  When you start a new task, the start tag says:
  Departure (B):

  What does the acronym for the (B)?

  Thank you!

  I don't know about you, and I do not have Thunderbird here with me to check right now. In your position, I would like to experiment. I suspect it's a keyboard shortcut to start ('start'?) a new definition of the task with a single keyboard action.

• I want the cursor to be in the address bar when you create a new window; It works for new tabs and a new private window, but not in safe mode.

  I tried following the advice offered in the different threads bit I found on this but nothing works out. I want the cursor to be in the address bar when I open a new window or when firefox opens without restoring a previous session. I solved the problem for new tabs via subject: config, but it does not work for the new windows. I tried safe mode and the problem persists. In a new private window, the cursor is in the address bar.

  A new window opens the homepage (default: subject: House) and not the new tab page (default: subject: newtab).

  Some of the built-in pages set the focus to the search bar on the web page, just like the Google site only.

  You can use a bookmark in the bookmarks toolbar that opens the subject: blank page.
  If you hold down the SHIFT key when you click this bookmark, then you open a new widow with this page.
  Otherwise, you need to set the home page to about: blank or on the point: about to have easy access to all the pages.

• How reset you the app to drive zero when you have completed a workout?

  How reset you the app to drive zero when you have completed a workout?

  Hi Larry

  When you are ready to complete your workout, press firmly on the view > press end > turn the digital Crown to scroll the summary results > at the bottom of the summary, touch save or delete.

  More information:

  Use of the workout on your Apple Watch - Apple Support

• When Microsoft will release product keys for the new xbox live beta dashboard for users? 26 August

  Hello

  I am registered for the new program to update xbox live dashboard beta and I was wondering when microsoft will likely make the product keys available for this update will take place. I waited more than 24 hours now and I find it unacceptable to keep the people waiting for such a highly anticipated update.

  did anyone know when these product keys are likely to become available because I'm starting to lose my patience now.

  syhawkes

  I would check the updates on the site of Major Nelson

  http://Majornelson.com/2012/08/21/open-call-more-testers-welcome-for-2012-Xbox-Live-update-public-beta/

  When I made the beta for the dashboard they usually come out in waves. You just need patience because there is no time to get it.