Impossible to editing a program using Revo and Control Panel.

Similar Questions

• Installed programs disappeared from the control panel windows 7 pro 32 bit programs and features

  Installed programs disappeared from the Control Panel programs and features on windows 7 only 3 programs which I recently installed appear to someone can help me

  Hi Akhilnath,

  This problem may occur because of corrupted system files.

  Did you the latest changes on the computer before this problem?

  
  Method 1:
  I would suggest to run the auditor of file system (CFS), parse and check if it helps.

  SFC scan will scan system files corrupted on your computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2:
  If the problem occurred recently, I suggest to perform the system restore and check if it helps.

  See the link.

  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• I have Vista and I can not program to open my Control Panel control or office told me application not found

  I have Vista and I can not program to open my control panel or office

  For Windows Vista file association problems
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  You probably have an association bad .exe. Try the fix for this.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Req to send my audio drivers and Control Panel

  Hello, my audio drivers and control panel have been lost due to the attack of Trojan horses. I am unable to choose my required drivers and Control Panel, as an error report occurs and is closing is the open window.so you, please please send me the suitable audio drivers and control computer panel.my laptop presario c555nr model.please send them as soon as posible.

  http://h20180.www2.HP.com/apps/lookup?h_lang=en&h_cc=us&cc=us&h_page=hpcom&lang=en&h_client=S-A-R163-1&h_pagetype=s-002&h_query=c555n&submit=go+%BB

  These are yours?

  Alternatively, you can try to restore your computer to a point before the attack of Trojan with the Microsoft System Restore.

  Go start > all programs > Accessories > system tool > system restore.

  If the Trojan damaged your system to the point where you can't fix it, you may need to reload your OS using your HP Recovery Manager. Save all of your personal information. prior to this, as it will be deleted.

• T430: Cannot change the GPU using the NVIDIA Control Panel

  Hello world

  I recently bought a T430 including a NVIDIA NVS 5400 M. games graphics card (for example, Max Payne 3) used to run fast, using the NVIDIA GPU. Today, I tried to play a video game once more (after having not played for several weeks). Unfortunately, my OS (Win7, 64-bit) assigns the GPU from Intel, resulting in a much lower speed. Using the NVIDIA Control Panel, I can't change my favorite GPU (changes will not be saved). I already run a update of Lenovo and installed the latest graphics driver (296.88), which resulted in no improvement.

  When you start a game, I can choose my graphics manually, but I would like to configure some general settings using the control panel.

  Do you have any solutions?

  Thank you very much.

  
  

• Can I install video driver AMD and Control Panel on HP ProBook 4540 s?

  Hello

  I want to install driver video AMD and control panel alongside Intel video driverand Control Panel.

  Here's my computer laptop Information System:

  Name of the Microsoft Windows 8.1 operating system company

  Version 6.3.9600 Build 9600

  Another Description of the OS is not available

  Manufacturer of operating system Microsoft Corporation

  ROGUE system name

  System manufacturer Hewlett-Packard

  HP ProBook s 4540 model system

  System Type x 64-based PC

  SKU C1B74PA #UUF system

  Intel Core processor i5 - 3210M CPU @ 2.50 GHz, 2501 Mhz, 2 Lossnay, 4 logical processors

  BIOS Version/Date Hewlett-Packard 68IRR worm. F.50, 04/08/2014

  SMBIOS Version 2.7

  Embedded Controller Version 88.33

  BIOS Legacy Mode

  Baseboard manufacturer Hewlett-Packard

  Model baseboard is not available

  Name of plinth base

  Role Mobile platform

  State of secure boot not supported

  PCR7 Configuration binding is not Possible

  Windows directory C:\Windows

  System directory C:\Windows\system32

  Boot Device \Device\HarddiskVolume1

  The local United States

  Hardware Abstraction Layer Version = "6.3.9600.17196".

  User name TuHiN\T u H i N

  Bangladesh time zone standard time

  Physical memory (RAM) installed 4.00 GB

  3.88 GB total physical memory

  Available physical memory 1.95 GB

  7.88 GB total virtual memory

  5.59 GB available virtual memory

  Page file space 4.00 GB

  Paging file C:\pagefile.sys

  Hyper-V - VM monitor Mode Extensions Yes

  Hyper-V - second level address translation Extensions Yes

  Hyper-V - virtualization enabled in Firmware No.

  Hyper-V - data execution Protection Yes

  Hello:

  From what I can find on the product number you posted, it only comes with the integrated graphics Intel HD 4000 which means that you can not install the AMD software because it won't do a thing.

  That only works for laptops with AMD/Intel switchable graphics.

  HP Probook s 4540 C1B74PA Core i5 - 3210M Ram 4 GB HDD 750 GB 15.6 inch

  * ProcesseurIntel Core i5 - 3210M (2.50 Ghz, 3 MB L3 Cache)
  * RAM 4 GB DDR3 BUSS 1333 Mhz
  * 750 GB HARD drive -5400 RPM (SATA)
  * Display 15.6 "LED
  * Graphics Graphics Intel HD 4000
  * Wireless 802.11 b/g/n
  * External ports3.0/VGA/HDMI/RJ-45/ Headphone Out/Lan10/100/1000/bluetooth usb...
  * Pin 6-cell
  * Camera 1.3Mpx
  * Weight 2.5 Kg
  * OPERATING SYSTEM PC BACK

• How to reinstall intel graphics and Control Panel? Samsung intel graphics hd 8.15.10.2266 Tnx family!

  How to reinstall intel graphics and Control Panel? Samsung intel graphics hd 8.15.10.2266 Tnx family!

  Download directly from the web site of Samsung.

• How to: using the same control panel for several vi and reproducing change to the control panel.

  I created a labview project that contains about 40 vi.  Each vi has a joint control panel which is a group of ip address, or address of the port and the parameters that are passed high-level vi at low level vi for the purpose of control and access our daq cards.  As this control panel exists in all the vi and must not be the same there is a problem when the need to make a change or update the controls during development.  The problem is how long it takes to go and change the control panel of each single vi.  I wish I had a way of reproducing a change in the Panel of control through all six simultaneously.

  All controls in the control panel are in a bundle, so all values are passed to 1 thread.

  I tried to turn the Panel in a sub vi and this way I can just "create control" and have output parameters maniuplate vi, but if I update the vi, I still have to go back and create a new control for each vi under the control has changed.

  I tried using secondary and the creation of the control panel in a sub vi which is displayed in the secondary, but gives the undesirable consequence of not being able to view or change the settings of the control panel if the program does not work, as pristine as when sub-panels program does not work.

  Is there a another way to display the front panel of a Subvi next using a panel of void?  Is there a better way to propagate changes in a bundle in a series of vi?

  Yes a def type might help you and I would take the next step to make a strict type def if you want the look to be the same on all its bodies. You can also view this nugget on Type definitions for more idea about it.

  Have fun

  Ben

• deleted programs still appear in Control Panel of configuration/programs and features and in the start-up of System Configuration tab

  programs deleted, but their names are still appear in Control Panel of configuration/programs and features and how System Configuration startup tab I erase them for LIFE!

  Hello

  To change the startup programs and remains entered boot in Windows 7, use either of these methods:

  «How to use MSCONFIG in Windows 7»

  http://www.netsquirrel.com/Msconfig/msconfig_win7.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• How can I remove icons for programs unibstalled of the control panel "programs and features"?

  Icons FRO uninstalled programs still appear in "Programs and features" of the control panel. How can I remove them?

  Hello

  
  Icon/program which you are referring?
  
  To work on the issue, refer to these methods.
  
  Method 1:
  
  Check out the following link to start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Check if the problem persists in safe mode. Display the results.
   
  Restart the computer and boot to the desktop normally.
  
  Method 2:
  
  Run the fixit from following link to confirm if the program or the application has been uninstalled correctly.
  
  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall
   
  See also:
  Troubleshoot installing or uninstalling programs
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
  
  Check if it helps.

• remove the update install Q How to uninstall this stupid thing, the usual method of use of the Control Panel does NOT work

  I tried for hours and hours to remove the program called InstallQUpdater. usually, I go to the control panel and click on uninstall, then find the program, click the program, and then click on uninstall. I the image appears saying "preparing to uninstall" later I program pop up asking if I want to cancel because it is a source of the United Nations identified, I click and wait... .i have tried cleck say the oposie and wait. It seems as it asks me to authorize the installation program must be installed. I don't want and I can't get rid of it.

  Hello

  There is a possibility that it is Adware.

  Read this information about it:

  http://www.ehow.com/facts_7898673_install-IQ-Updater.html

  Try this.

  Use the FREE Revo Uninstaller to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  And I would also do a scan of Malware;

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• How can I remove a duplicate 'Add or remove programs"icon in the control panel?

  Whenever I open the Control Panel on my computer, I see two icons "Add or Remove Programs". How can I fix this problem?

  Some of what you see in the Panel comes from Control Panel Extension files found in the folder c:\windows\system32 (assuming that XP is installed on your C drive).  If you look at our you will find some there. CPL files and those who do a lot of what you see in the Panel.

  The applet Add / Remove programs you see displayed in the Panel appears because there is a file there called:

  appwiz.cpl

  If you go to c:\windows\system32 and copy the appwiz.cpl file and call the copy something like jose.cpl then go to control panel, you will see so two addition / deletion of programs listed (and they both work).  Non believers, try it.

  If you see two copies of add or remove programs in Control Panel, both work?

  I don't know what your problem is exactly or how it got that way, but if you use the Windows Explorer and browse to c:\windows\system32 folder, and then click search for .cpl, you will get a list of all the .cpl in this folder files (and maybe also see copies of backup in the dllcache folder).

  Click the size column heading to sort the. CPL files by size, then look for appwiz.cpl in the list and then look for another. CPL file above or below that has the same size and date than the appwiz.cpl file and see what the name of this file is (as jose.cpl).  If there is another file that is the same size and date than the appwiz.cpl, that's your problem.

  If you find it will not know what it is, you can just rename the suspicious file to something ending with an extension .cpl (like jose.xxx) and see what things look like.  If things get worse, just rename the file, the original name and seek some other idea-ers.

  If you find the file that resembles appwiz.cpl and don't know what it is, tell us what you see and that someone can help you to understand.

• How display the Quick Launch toolbar while right-clicking is prohibited and control panel is also forbidden?

  I have a user limited access to work where the right-click and access more common is forbidden by the administrator of the computer. Can I show the Quick Launch toolbar without using the right click on the bar of tasks and without the help of the control panel.

  At the same time, the shortcut for show desktop is also prohibited (windows logo + D)

  Hello

  After some reflections more and a little research, you can try this...

  • Click Start
  • Click on run
  • Paste it into the Open box: %SystemRoot%\System32\rundll32.exe shell32.dll, Options_RunDLL 1
  • Click OK
  • This should run the bar spots and the properties of the Start Menu
  • Check the box "Show Quick Launch.
  • Click OK

  However, you may find that you are locked out of the race and taskbar and properties of the Menu start too!

  If you can start the task (ctrl-alt-del) Manager, you can try the same thing in the drop-file for the new task. Or even try the same from a command prompt (start - all programs-accessories).

  Tricky

• Can I recover a program I deleted accidentally Control Panel?

  I accidentally deleted a program from the control panel I want to hit the button change. The worst is that I don't know the name of the program, but it was a program in the list of programs beginning with an 'I '.  Well, everything seems to work on my computer now, so I can't imagine what was the program. Sorry, that's all the information I have - the program title was in the section of the programs that start with an "I".

  Thanks a lot to make me look like an idiot! I know there are millions of programs that start with the letter 'I', however, I thought you'd be able to give me a list of some common programs that are generally installed on computers running Microsoft! I prefer to use IE as my web browser, however, after this 'chip-axx"response, I now forget IE and use Mozilla Firefox only.

   
   
  I have XP and Windows 7. The only program I have in Add/Remove programs on both machines is ieSpell, the spelling of add-on for Internet Explorer that I installed. Thus, it is unlikely that it is a MS program that you deleted.
   
  Really, no one could even have a wild guess as to what program you removed. If everything works, I don't worry about this.
   
  Depending on what the program was, and how recent you deleted, restore the system could add it. I saw it for myself, but it does not always work.

• How to create a binding of the program file in the control panel of binding together?

  I get this message when I open a FLV file this file does not have a program with her association to perform this action. Create an association in the set Associations control panel

  It has to do with media decoder.

  Really, the best way is to install VLC media player.

  It's free.
  He plays almost all files formats.
  It is used and recommended Robert.

  Here is the download link:

  http://www.videolan.org/VLC/