Impossible to extract and run the update of BIOS HP Proliant ML350 G4

Similar Questions

• Impossible to extract and display the records

  Hi, I'm using Oracle 11 g

  The procedure is compiled without any errors.

  The select statement retrieves records well when they are run in SQL promt.

  But the same records are not displayed in this procedure by extraction of the cursor.

  Last post in the 'done' procedure is also displayed.

  Please help me retriving records.

  --------------------------------------------------------------------------------------------------------

  create or replace procedure disp_rec (vid IN varchar2, vfeat in numbers)
  is

  cursor c1 is select gid, listagg (vindex, ',') within the Group (order by tid) idx from ridrecords where idarpt = vid and feattype = vfeat group by gid;

  type vg is table of number;
  type vi is table of the varchar2 (3500);

  a vg;
  b vi.

  Start

  If vfeat = 0 then
  Open c1;
  loop
  collect the fetch c1 into loose in a, b;
  When exit c1% notfound;
  for indx in a.first... a.Last loop
  dbms_output.put_line ((indx) a | b (indx));
  end loop;
  end loop;
  Close c1;

  elsif vfeat = 1 then
  Open c1;
  loop
  collect the fetch c1 into loose in a, b;
  When exit c1% notfound;
  for indx in a.first... a.Last loop
  dbms_output.put_line ((indx) a | b (indx));
  end loop;
  end loop;
  Close c1;

  end if;

  dbms_output.put_line ('completed');
  end disp_rec;

  It depends on what will be different on the input values.

  Your original example two blocks has done the same at first glance.

  For example, you can do

  Start

  Open c1;

  loop

  collect the fetch c1 into loose in a, b LIMIT l_limit;

  If l_input = 0 then

  ForAll indx in 1... a .count

  Update emp2 ename set = b (indx)

  where empno = a (indx);

  elsif l_input = 1 then

  ForAll indx in 1... a .count

  Remove emp2

  where empno = a (indx);

  end if;

  When the output $a.count<>

  end loop;

  Close c1;

  dbms_output.put_line ('completed');

  end;

• Impossible to compile and run the project

  Hello

  Last night, my project ran and deployed to the alpha of dev without problem.

  This morning (and the only thing I've done is changed my icon and splash screen) it just sits there at 91%. When you look at the progress window there are two progress bars:

  1 says Syncing and application startup

  2 said launch myapp (blocked: user operation is pending of "" to complete).

  This eventually give up and display a dialog window:

  There is problem

  Synchronization and application startup

  Deployment failed: Info: request shipment: install and launch

  News: Native on debugging

  Information: size of the 648916759 file

  Info: installation

  Info: Treatment 648916759 bytes

  News: Progress 0%...

  News: Advance 4%...

  Info: 99% progress

  actual_id:

  actual_version:

  result: failure 812/var/tmp/cgic247239: duplicate member name ' native/MyAppName '.

  It's that last line that concerns me.

  Any ideas what is happening?  My other projects compile and deployment very well.  I tried to use the device-debug and release.  I rebooted the PC and dev alpha and even delete the running configs so that they recreated

  Thank you very much

  After more digging, I came across http://supportforums.blackberry.com/t5/Cascades-Development/App-Wont-Launch/m-p/1955639/highlight/tr...

  I also tried to create a new project, but the problem persisted. But what it show me was a warning in the bar file descripter.  The assets he suggested I had a duplicate png file.  The assets tab listed my assets folder (where the image was in fact), but it was also alongside icon.png.  So I removed that in the list and hey presto - all is well again.

• When I try to update 9.3 I get an error indicating that the update cannot be verified because I'm no longer connected to Internet when I am in fact. Tried to restart and run the update with the same problem. Any suggestions?

  9.3 update installation error

  Apple withdrew temporarily updating iOS 9.3 for devices more old to deal with some issues, what he was creating. Better to wait a few days for them to correct problems.

• I have re-installed Photoshop CS5 and have tried to run the update, but encounter an error message indicating that "there was an error downloading this update. Quit and try again later.

  The error occurs with updates for Bridge CS5, Extension Manager CS5, Photoshop CS5, and Photoshop Camera Raw updates. I tried to run the update multiple times and it appears to download updates and then fails with the message above. Internet connection is OK. Does anyone have any ideas as to why this could happen?

  The latetest (cloud) update sometimes does not work with old programs... Try to install your updates manually

  Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/

• I keep running the update of firefox, but next time I click on my icon of firefox, it opens an older version and asks me to update. What is going on?

  I downloaded and ran the update of Firefox. It said it was successful and then the homepage etc came. However, after I had closed and starts again the 'old' version came when I clicked on the icon of Firefox with the usual comment I have an old version and that you need to update. I tried this three times with the same result. I have a laptop Compaq Presario 2200.

  What I am doing wrong?

  If you use the www.google.com/firefox as homepage site that previous versions of Firefox 3 use as homepage you can ignore the message about not using the latest version of Firefox on this page.
  
  Google seems to keep this page.
  
  The text on the implementation of the latest version of Firefox is in the code of the www.google.com/firefox site that previous versions of Firefox 3 use as homepage and it seems that Google is no longer do not update this page.
  
  The current versions of Firefox 4 + is no longer use this website from Google as home page, but use the build-in on: home page as the home page.
  
  Google assumes that you are using an older version of Firefox if you still visit this site, and warns you that you are using an older version of Firefox and invites you to update.
  
  You can use a different page than the homepage as subject: House or www.google.com or www.google.com/ig (iGoogle).

• Failed to load the JDBC driver when you run the update of the base

  I use dev studio to extract data in the pipeline to an Oracle database using an adapter record, on version 3.1.1 short. I get errors when running the update of the base:
  
  ERROR 22/03/13 17:13:37.273 UTC (1363972417273) {config} forge: (AdapterRunner): unable to load the JDBC driver: oracle.jdbc.OracleDriver. com.endeca.edf.adapter.plugins.JdbcAdapterException: cannot load JDBC driver: oracle.jdbc.OracleDriver.      at com.endeca.edf.adapter.plugins.JdbcAdapter.loadDriver(JdbcAdapter.java:256) at com.endeca.edf.adapter.plugins.JdbcAdapter.execute(JdbcAdapter.java:91) at com.endeca.edf.adapter.AdapterRunner.run(AdapterRunner.java:168) at com.endeca.edf.adapter.AdapterRunner.main(AdapterRunner.java:43) caused by: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver to java.net.URLClassLoader$ 1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged (Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:303) at Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316) at java.lang.Class.forName0 (Native Method) at java.lang.Class.forName(Class.java:169) to com.endeca.edf.adapter.plugins.JdbcAdapter.loadDriver(JdbcAdapter.java:252)... 3 more
  ERROR 22/03/13 17:13:38.291 UTC (1363972418291) FORGE {config}: the java process evaluating the manipulative java class 'com.endeca.edf.adapter.plugins.JdbcAdapter' failed. Check the file ' / u01/oracle/VIS/apps/apps_st/comn/Oracle/endeca/Discover/./logs/forges/Forge/Edf.Pipeline.RecordPipeline.JavaManipulator.LoadOracleItems.log ' for more information.
  ERROR 22/03/13 17:13:44.840 UTC (1363972424840) {baseline} FORGE: Forge failed with 2 errors and 0 warnings.
  
  Pass on the adapter check crossings are defined as follows:
  
  DB_DRIVER_CLASS = oracle.jdbc.OracleDriver
  DB_URL = JDBC: thin: username / [email protected]:1521:VIS
  SQL = select * from XXFCI_ENDECA_ITEM_DATA
  
  I've set up the classpath as a variable that is defined in environment.properties as follows:
  forge.javaClasspath = ${ENDECA_PROJECT_DIR}/config/lib/java/ojdbc6.jar;${ENDECA_PROJECT_DIR}/config/lib/java/AdvJDBCColumnHandler.jar;${ENDECA_PROJECT_DIR}/config/lib/java/javaManipCommon-1.1.jar;${ENDECA_PROJECT_DIR}/config/lib/java/jakarta-oro-2.0.8.jar;D:/Endeca/CAS/3.1.1/lib/recordstore-forge-adapter/recordstore-forge-adapter-3.1.1.jar
  
  I'm passing forge.javaClasspath as an argument through the DataIngest.xml variable. The arguments that I am passing in DataIngest.xml are as follows:
  < args >
  < arg > - vw < / arg >
  < arg - > pruneAutoGen < / arg >
  < arg - > javaClasspath < / arg >
  < arg >$ {forge.javaClasspath} < / arg >
  < / args >
  
  
  I wonder if the versions of javaManipCommon - 1.1.jar and jakarta-oro - 2.0.8.jar are correct for version 3.1.1 of short. How will I know? What else can I do to fix this?
  
  Any help you can give would be appreciated!
  
  Thank you
  Becky Bradberry
  Senior Oracle consultant
  Promote the Concepts

  You run this under Linux or Windows? The path of the log file looks like Linux, but your classpath is configured to use windows (semicolons instead of colon) separators.

  Concerning

  Michael

• Start page does not update after you run the update

  Run the update, on shows 9.0.1 and up-to-date... but everytime I open the browser, it shows that I'm behind and that you need to update? I refreshed, etc... always won ' accepts that I'm updating

  If you use the www.google.com/firefox as homepage site that previous versions of Firefox 3 use as homepage you can ignore the message about not using the latest version of Firefox on this page.
  
  Google seems to keep this page.

  Google assumes that you are using an older version of Firefox if you still visit this site, and warns you that you are using an older version of Firefox and invites you to update.
  
  You can use a different page than the homepage as subject: House or www.google.com or www.google.com/ig (iGoogle).

• NB200 - screen resolution is not enough to run the update

  I am trying to install an update to a program that I already have in my NB200 and I can't because it says the resolution of the screen is not sufficient for the execution of this update.

  Can someone suggest a 'fix' for this please?

  Hello

  Well, I have no idea why no update of the request for the resolution of the screen because this should not affect the update procedures, but it would be interesting to change the resolution, and then to re-run the update.

  I guess that you're using Win XP right click on the desktop-> properties-> settings

  Here, you can increase the resolution of the screen.

  On the other hand, it might be possible that your graphics card driver needs to be updated.
  To do this, see European driver of Toshiba.

• Is there a way to know if the current modules are compatible with the latest upgrade of Firefox before running the update?

  I want to know if my Add-ons and current themes are compatible with the latest update of Firefox before running the update.

  Hello azdec.

  You can check the add page - we in addons.mozilla.org so it's just one or two. In my view, there is an extensions in the Gallery of modules that allows you to see if your modules are compatible with the newer versions of Firefox. But you'll have to look for them, because I don't know how it's called.

  I remind you that if you want an add-on to be compatible with a newer version of Firefox, you must contact its author.

  In addition, the version of Firefox you are using right now has been suspended and is no longer supported. In addition, it has known bugs and security problems. I invite you to upgrade to the latest version of Firefox, for maximum stability, performance, security and ease of use. You can get it for free, as always, to getfirefox.com.

• When I try to run the update in widows I get the error number: 0x8024400A

  When I try to run the update in widows I get the error number: 0x8024400A. I also tried to restart the automatic update service and BITS service with no luck. Any ideas? I am running Windows XP SP2 on a Dell Latitude. I lost a hard drive and just reinstalled today of a disc from Dell.

  Thank you

  Adam

  http://support.Microsoft.com/kb/836941

  Read the above article, you can use Fixit, but I suggest fix you it yourself by following the steps in the resolution.

• will not let me run the updates so I can't even install norton

  loaded the only windows service pack for xp one, I had. but now won't let me run the updates so I can't even install norton. He says I need service pack 2 at least, but can no longer update this do I?

  I could ask why you are not being updated at least SP3, but I guess that's another story.

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  Some third-party programs can make a change in functionality after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947309

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

• All files generated by a coil in sqlplus receive ownership of oracle: dba instead of the user of the BONE started sqlplus and run the script. There's a file with users owners of BONES of the coil.

  All files generated by a coil in sqlplus receive ownership of oracle: dba instead of the user of the BONE started sqlplus and run the script. There's a file with users owners of BONES of the coil.

  Script launched in until OS user 'A' on the 'A' server which launches sqlplus, then connects to a remote database through a service of tnsnames.ora as another user of the database and the results of this script are spoulées on the server "A".

  The file queued on the old server is written with rw-rw-r: read write user, group read the writing, reading and possession header that is the user of the OS. The file queued on the new server is written to rw-r-r user: reading writing, reading group, public reading and ownership oracle: dba.

  "" The user then has no privileges to modify the file and continue the process of transmitting the file, editing and deleting the file for the next set of commands. This allows us to keep the possibility to migrate to the new server we are unable to process orders.

  $ORACLE_HOME/bin/sqlplus - s user/password@prd1 @./script/CustomScript/R12_OM_UFPC-oracle.sql

  Background: old server running 4.8, Oracle 10.2.0.4 OEL

  New server running OEL 6.5, Oracle 11.2.0.4

  Tested so far:

  File and update umask to 0002 instead of 0022 is now generated as rw-r-r. However, the property is still oracle: dba.

  Update of ownershipt of $ORACLE_HOME/bin/oracle.exe of oracle: oracle (edi added the user to the oracle group) and chmod 6751 oracle.exe. This created several problems where crucial scripts, that is to say of sqlplus failed to run.

  Added! chmod 755 output.file.name - OS user 'A' is not allowed to change to mod.

  Added! command cp MV output file and that generated the file as a user of the operating system: oracle. It is a potential work around in case of emergency, but the developer would have to rewrite the countless scripts.

  Any ideas?

  I have reproduced the behavior of the old server and am able to spool a file via sqlplus under OS user. No changes have been made on the remote database server. All the changes have been on the new server hosting a small 11.2.0.4 database on a server running OEL 6.5 32 - bit OS.

  (1) removed the sticky bit $ORACLE_HOME/bin/sqlplus using chmod u-s, g-s, o - s suggestion of Billy ~ Verreynne

  (2) modified the main group for the 'oracle' user match the user operating system applications, while maintaining membership in the groups 'oracle' and 'dba '.

  -We are dealing with here EDI processes, so the Group was called edi.

  (3) modified property of the files tnsnames.ora and listener.ora for oracle: edi

  (4) restart the receiver

  (5) disconnect / reconnect

  Script runs as expected, the output file contains the correct ownership and permissions.

  Thank you all for taking a look and offering options.

  -Josh

• Cannot run the update on Lightroom 6 / Win10

  I was fortunately run Lightroom 6 on a Windows 7 PC, but just bought a new PC running 64-bit Windows 10. I installed the original version of Lightroom 6 (version 6.0) and it works well, but I can't upgrade to the latest version. When I select "Help / updates" I get a screen to update telling me that the updates are available for Adobe Application Manager and Lightroom 6. I click 'OK '. Adobe Application Manager then downloads, I get a message saying 'Adobe Application Manager is updated' and then nothing. If I manually select "Adobe Application Manager" in the "Start" menu in Windows that nothing appears on the screen. If I reboot my PC and then run the update again, exactly the same thing: AAM downloads, says it will update and then does nothing. Running Windows Task Manager, I see that two processes, "Adobe Application Manager (32 bit)" and "Adobe Application Manager (updated Installer Sub System) (32 bit)" are running, but nothing happens.

  Help to successfully run the upgrade would be highly appreciated!

  Thank you

  Chris

  OK, finally got it working by downloading and installing a new version of the MAA. After that, the patch LR6.5 was properly executed.

  Thanks for the help, Jim. Much appreciate.

  All the best,

  Chris

• Build and run the illustrator of samples in xcode?

  Hello

  I'm trying to build and run the samples of illustrator using xcode. For that, I am following the steps in the document "getting started with adode Illustrator CC 2015 development", but I'm having a problem in compiling and linking a file 'BuildAll.xcodeproj'. My screen shows me this message:

  «error: there is no SDK with the name or the path "/ users/mbaz/Desktop/Adobe Illustrator CS5 SDK/samplecode/MasterProjects/macosx10.5'"»

  How can I solve this problem?

  Thank you

  The sulution to this problem to just update a pluging.