Impossible to install Vista on my Toshiba NB250 - 10G

Similar Questions

• Install Vista Home Premium Toshiba Recovery disk

  Hello

  I question: is it possible to install Vista recovery disk without erase all data on the HARD drive and destroy the current configuration partition?

  Question II: Is it possible to to somehow 'get' the installation of Vista from Toshiba recovery disc files,
  integrate em with SP1 and train a separate Vista installation disc?

  Question III: How much space do you think I should spare for the primary partition for Vista OS only (file and all the other software will be on other partitions)?

  (1) No, it is not possible to install Vista from the Toshiba Recovery disk without format the whole HARD drive.
  You can only use the HARD drive recovery feature if you don t want to erase the whole HARD drive. Then only the first partition is erased.

  (2) No, this is not possible. The recovery disk contains factory settings in an image and you can change something. You must install SP1 after installing Windows.

  (3) you must use the 15 or 20 GB for the system partition, but if you reinstall Vista, you reinstall all of the programs. So you can install all the programs on the first partition.
  Here is a useful article on the Vista partition Manager:
  http://195.182.196.33/KB0/TSB7101OB0006R01.htm

• Impossible to install Vista on Satellite A300 PSAGCE - not ACPI compliant

  Hello

  I'm recovering the laptop from a friend.
  He has installed Windows XP on its Satellite A300 PSAGCE and concluded that of course XP 32-bit Windows does not support the full functionality of the laptop.

  Now I wanted to reinstall Vista that came with it. I have two recovery DVD but when I wanted to start them (them two DVDs) I always get the error message that the system is not fully ACPI-compatible.

  Now of course this laptop should work with Vista and the provided restore DVD should work as well, no?
  I tried to download a Bios nw, but it seems 1.10 is the most recent.

  I also can't find all the ACPI settings in the BIOS that I could activate.

  Could someone help me?
  It is really urgent and driving me crazy!

  Thank you!

  Hello

  Strange! Usually, if you have created the DVD recovery Toshiba using the TOSHIBA Recovery Disc Creator then everything should work correctly and you should be able to install Vista on this A300!

  I put t know if you have changed something in the BIOS or elsewhere, but you should access the BIOS and should define the default settings.
  Then try to boot from the recovery DVD Toshiba again.

  Good luck

• Impossible to install Vista 32 bit or Windows 7 on my Satellite L300D

  Hello world

  I recently decided to reboot my laptop, because whenever I open it, it will say do to run a recovery system and doesn't go anywhere.
  I left it on for hours and nothing came, so I tried to install Vista 32 bit, but does not. I need Windows Vista 64 bit or is this something else?

  In general your ad is a little complicated to understand. We understand that you have problems with the installation of the OS, but I put t understand exactly what happens then please be so kind and try to explain what happening exactly when you try to use the original Toshiba recovery image.

  Does installation starts correctly?
  On what stage is stays and doesn't go further?
  What happen when you try to use the Win7 installation disc?

  Please provide as much information as possible.

• Impossible to install Vista Service Pack 2

  Vista Service Pack 2 (KB948465) have not installed yesterday morning via my auto-download of Windows.  When the "failed" dialog box came, the error code given was 80070490.

  I then tried a 'manual' download via the Microsoft Download site - it did not work.  Provided a link directing me to http://support.microsoft.com/kb947366.  He suggested download "tool update for Vista (KB947821) system, which I did, ran, then rebooted and tried again auto-download of Windows.  It is always impossible to install, with the same code (80070490) given.

  During all this time, and reading various troubleshooting suggestions, I realized that I had to disable my antivirus, protection against spyware, etc.  So I did, then tried again auto-download of Windows.  It has always failed.  Then I tried the manual download (I had saved the executable file in my "Download" folder).  But it still does not work.

  Somewhere else troubleshooting suggested to disable antispyware/virus, reset programs and open in safe mode - which I did, then tried the executable file downloaded, I had previously saved in my folder "Download".  But it still doesn't work.  This time, the dialog box has given me a little bit more information: "Installation was not successful.  Item was not found.  Details (a link that I clicked on) and it will read: error: ERROR_NOT_FOUND (0 x 80070490).

  So I've now used up what little expertise I have - you suggested I should try next?

  Thank you!

  Hello Voxstellarum9

  Thank you for using Microsoft Vista answers Forum!

  The error code you encounter means there is corruption in the manifesto of component maintenance (EC). To resolve this problem, follow the appropriate steps for your operating system in this link http://support.microsoft.com/kb/958044

  If please reply and let us know if your problem is resolved or if you need more help

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Impossible to install Vista SP2, says needs update of system tool

  I use Windows Vista Home Premium 32 - bit edition with Service Pack 1.  His ability to perform automatic and manual, updates have not completely.  When I try to update, it tells me that I need what is called a system update tool.  The Download Center Windows says I need Service Pack 2 to use this tool.  But when I tried to install Service Pack 2, it failed, saying he needs the system update tool.

  Then... I need Service Pack 2 to install the system update readiness tool, and I need the analysis of system update tool to install Service Pack 2?  Huh?

  The only other option I can find for this is to fix the "CBS Manifest" which is apparently corrupt.  To do this, I need to "repair Windows" using "Windows DVD.  But this computer comes with pre-installed Windows and did not come with a 'Windows DVD.

  Is there a solution to this problem?  Any advice would be helpful and appreciated.  I ran virus and malware scanners, are looking for things that can interfere with the update process, defragmented my hard drive and cleaned the registry.  What other options are available?

  * original title - updated: absurd circular problem. Please help.*

  I use Windows Vista Home Premium 32 - bit edition with Service Pack 1.  His ability to perform automatic and manual, updates have not completely.  When I try to update, it tells me that I need what is called a system update tool.  The Download Center Windows says I need Service Pack 2 to use this tool.  But when I tried to install Service Pack 2, it failed, saying he needs the system update tool.

  Then... I need Service Pack 2 to install the system update readiness tool, and I need the analysis of system update tool to install Service Pack 2?  Huh?

  The only other option I can find for this is to fix the "CBS Manifest" which is apparently corrupt.  To do this, I need to "repair Windows" using "Windows DVD.  But this computer comes with pre-installed Windows and did not come with a 'Windows DVD.

  Is there a solution to this problem?  Any advice would be helpful and appreciated.  I ran virus and malware scanners, are looking for things that can interfere with the update process, defragmented my hard drive and cleaned the registry.  What other options are available?

  Hey RahXephon

  see if you can borrow a vista microsoft dvd to do a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  You may have more luck with this if repost you in the correct windows update forum

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Impossible to install Vista Service Pack 2, affirms the need to install Service Pack 1 first

  I try to install Vista Service Pack 2 automatically, and it is said to be complete after 5 seconds.  I have check and don't have Service Pack 1 installed.  I am trying to download and install Service Pack 2 manually, and it tells me I have to install Service Pack 1 first, but it is installed.  What should I do?

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

• Dead HD came with my HP laptop, it's impossible to install Vista AGAIN!

  Hi all

  My HD that came with my HP laptop has courrpted and I could not install Vista more. I bought the NEW HD.

  HP has not provid me with Recovery CD/DVD when I bought it. I have

  s/n, n/p, licence printed at the bottom of the laptop... Please, is it possible that I can find new or re-download the OS? Or better yet the drivers for XP?

  Product: HP Pavilion dv2500

  Service etiquette: dv2530ee

  Thanks in advance

  Sorry, but in some sort, I have not seen this problem. I'm happy, then you have found the solution for it. Kudos to you for all your kind words to me.

• Impossible to install Vista on Portege M400 - not compatible with ACPI

  Hello

  I have a toshiba portege m400.
  It has windows xp professional installed SP3 (the former owner he replaced with that of the xp tablet edition - I want to upgrade to vista so I can have the capabilities of the rear shelf!)

  In any case, I have a vista version - a version upgrade Home premium.
  When I try to install it it comes up with the error:

  +' This computer is not compliant with the Advanced Configuration and Power Interface (ACPI) standard. Windows must be installed on a computer that supports ACPI. Contact the manufacturer of your computer for an update of the BIOS, or install Windows on an ACPI compatible computer. " +

  When I try to boot from the cd it gets up to when I type in the product key, but then he tells me I have to run this from my current operating system.

  I tried to update the BIOS (it is currently 1.8 and I heard vista needs 2.0 at least). I tried to install the latest driver from the Web from Toshiba - BIOS version 3.2.8 site but it says "this computer is not supported" even if I went through the procedure of choice of type of my laptop and spec and the pilot came on his list.
  Now I'm pulling my hair out.

  Can someone help me please!
  Would be to get a full version of vista (not an upgrade version) work and boot from the cd because it seemed to go further like this?

  Thank you!

  Hi guys

  I think I know how you will be able to update the BIOS

  I read here in the forum that in very rare cases, you have the Toshiba preinstalled OS in order to update the BIOS
  So in my opinion, you will be able to update the BIOS if install you the operating system from the Toshiba recovery disc.
  After installation try to update the BIOS

  After the BIOS has been updated you could install the new Vista

  See you soon

• Impossible to install the Player DVD Toshiba HD for Windows 7-64 bit

  Laptop: Toshiba Qosmio G40 with windows 7 Ultimate 64 Bit

  I can't install the driver of DVD HD Toshiba for Windows 7-64 bit 4.60.03 from 30/11/09!

  The facility will be cancel information that the software cannot be installed on this system.

  Problem is that the file that you downloaded is not the player but just an update.
  Usually, you should be able to install player designed for Vista and install this updated level, but eventually I can see, Toshiba doesn't offer HD DVD player for Vista 64-bit.

  I assume that your laptop comes with Vista 32 bit only. Am I right about that?

• Impossible to install Vista 64-bit on Qosmio F20 - HDD not visible

  during the installation of windows Vista-64, it does not recognize the hard drive. My Qosmio Toshiba raid scsi LD0 drive a.

  Hello

  Vista 64 bit does not recognize the HARD drive because the RAID driver has not been installed in a previous step.
  You need to install the RAID driver first, and then Vista will see HARD drive!

  But I think there could be a problem with the installation of the 64-bit version.
  The driver of Toshiba page doesn t provide any drivers for the 64 bit OS and you will find all drivers 64-bit RIAD.
  You can try to install the 32-bit version but I m not sure if it will run.

  You can test it!

• Impossible to install Vista Service Pack 2 (0x80070005)

  Hi, I tried to install SP2 on my current Vista Home Premium SP 1.  However, no matter what I try, I receive the ERROR_ACCESS_DENIED.  And I tried several ways, including:
  System Update Readiness Tool v4, and v7, then remove Windows Update files, reinstalling windows update, check the COM security settings, run as "Administrator" etc.

  I can't make it work!  I have attached the portion of my cbs.log newspaper:

  2010-03-09 11:49:10, info CSI CSI 1247136 (0x001307a0) store initialized 00000005
  2010-03-09 11:49:10, CBS Session info: initialized 30064552:1896269760.
  2010-03-09 11:49:11, info CBS SPI: Parent KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000 to SP2 package with install state 7
  2010-03-09 11:49:11, CBS information session: 30064552:1896269760 finalized.  Reboot required: no
  2010-03-09 11:49:11, CBS briefing: initialized 30064552:1902821760.
  2010-03-09 11:49:11, error CBS SPI: (CSPICbsClient::EnumPackages:63) Impossible to enumerate CBS packages hr = 0x80070005
  2010-03-09 11:49:11, error CBS SPI: (CSystem::EnumerateCbsPackages:313) could not complete CBS package list, hr = 0 x 80070005
  2010-03-09 11:49:11, CBS information session: 30064552:1902821760 finalized.  Reboot required: no
  2010-03-09 11:49:11, info CBS SPI: could not enumerate the packages CBS
  2010-03-09 11:49:11, error CBS SPI: (GetLatestVersionFromCBSStore:135) ATL exception hr = 0x80070005
  2010-03-09 11:49:11, error CBS SPI: (CSPCInstallTask::ApplicabilityScan:712) could not get the latest version of VistaSP2-KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005 hr = 0 x 80070005 store
  2010-03-09 11:49:11, error CBS SPI: (CSPCInstallTask::ApplicabilityScan:700) did not make an analysis of the applicability of the SP bound for package Windows6. 0-KB955430 - x 86 .cab hr = 0 x 80070005
  2010-03-09 11:49:11, error CBS SPI: (CSPInstall::CompatibilityApplicabilityScan:1056) failure of verification of the applicability of the tasks of HR = 0x80070005
  2010-03-09 11:49:11, info CBS SPI: scan ending Compatibility\Applicability
  2010-03-09 11:49:11, error CBS SPI: (PerformSPInstallation:764) cannot install MS using IU hr = 0x80070005
  2010-03-09 11:49:11, error CBS SPI: (wmain:1059) could not run SP installation hr = 0 x 80070005
  2010-03-09 11:49:11, info CBS SPI: event reports failed
  2010-03-09 11:49:19, info CBS SPI: SPInstall terminating, return code 0 x 5

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates).

  Please check that you are logged into an account with administrative privileges.

  Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate.  What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. save the zip on your desktop and extract the file:
  -Right-click on the file and select extract all...
  -Click Next when prompted for the Destination.

  Therefore, you should see a folder called AccessChk on your desktop.

  3. open the folder AccessChk

  4 press and hold the shift key and right-click in the window.  Select "open here command prompt.

  5. a command prompt window should open a similar message:
  C:\Users\\Desktop\accesschk >

  6. type the following command and press ENTER:
  "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
  Tip: You should be able to copy and paste the command into the command prompt.

  7. close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. double-click on Accesschk.txt (text file), it should open Notepad.

  If this is insufficient,

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:
   
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
  SubInACL (SubInACL.exe)
   
  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.
  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:
   
  off @echo
   
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
   
  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause
   
  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".

  8. you will see a window of type BACK treatment.
   
  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  Note: On some driver update installation procedure, we also received this error code, please redirect this kind of case to the Team System Vista, because it can be considered for structure of third-party programs.

  Look for updates after that.

  Hope this information is useful.

  This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

  From: Microsoft Answers Support Engineer
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  TaurArian [MVP] 2005-2010 - Update Services

• Impossible to install WIN 7 SP1 on NB250

  When I run Windows Update on the laptop NB250 installing Windows 7 SP1 is recommended. Even if the computer is not able to install this update and shows error code 800F0829.

  In this site, I learned that NB250 is compatible with SP1. That is why I would ask a solution for this problem. Thanks in advance for your collaboration.

  After the error code the computer show something like "connect the computer to an electrical outlet and try again" if so try the update with your computer connected to a power supply.

  If this does not work there is a troubleshooting guide for updates: -.
  Open the Windows Update troubleshooting tool by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under system and security, click Fix problems with Windows Update.

• Impossible to install Vista on Qosmio G30-135 PQG31E - No. HDD

  Hello @ll

  I format my PC and I want to install XP or Vista, but I can't.

  Setup did not find any hard drives installed in your computer?
  Make sure that the hard drives are powered on and properly connected to your computer, and that any hardware configuration of the drives is correct!

  Any sugesstion thx!

  Hey Buddy

  I have to smile to read this message. :)
  Do you know why?
  Because you can find many threads here in the forum about this theme

  It s not only model Qosmio but you will answer a question also on all the laptops with the latest SATA controller!
  You must install the SATA driver, which is part of the Intel storage Manger or you can set the mode SATA (in BIOS) with compatible mode.
  But I'm not very well if this Qosmio supports this option of Mr. However you should check it out!

  As mentioned above; There are many threads on this installation of the SATA driver so read it!

• Impossible to install Vista Service Pack 1

  Hello. I have tried everywhere looking for a solution but does. My computer will not install Windows Vista Service Pack 1. I don't get the error messages. I click Download and install via Windows Update. To install the service pack. I am asked that it can take an hour or more. Then I have to click on the acceptance contract. After clicking on these screens, a new windows update screen pops up saying update installed successfully. Said the same thing in my history of update. After windows update closing and reopening, Windows Vista Service Pack 1 is back to the list of updates to install. This happens every time. The system makes no effort to install the update and doesn't give any error message.

  I tried to start in safe mode, but it still didn't install. Reinstalling Windows is not an option, because other users of this computer would be panic. I defragmented the hardrive and did an error check. Also ran CCleaner and one analyzing antivirus and ad-ware/malware. Nothing works. I know a lot about computers, but this one me stem.

  I also tried update readiness tool. Someone suggested that to me. A took about 25 minutes to install. He then said 'Installation '. I liquidated it and tried the service pack. Still a no go. So I rebooted the system and tried to install it then. It has not yet installed. I don't really know what did Update Readiness Tool.

  I also tried to install the stand-alone version. He has not installed and said that Windows update has encountered an unknown error. This is the version of 5 language pack.

  Please help me! Thank you

  Computer details:

  Dell Dimension DXP061
  Intel Core 2 CPU 4300 @1. 80 GHZ
  2046 MB RAM
  32-bit operating system (Windows Vista Home Premium)
  It's a genuine copy of Windows

  If we need more details please let me know.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install SP1?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  [outdated content removed February 22, 2015]