Impossible to move in time to the last image after update

Similar Questions

• Time since the last action of the front by the user

  Hi I'm looking for an easy way to get the elapsed time since the last action of the façade was done by the user. This should be a security check as after two hours, the system should. Officially, I checked this by comparing a value absolute clock read before the loop appropriate at the present time. But as I have now two loops at the same time it would not work, and in any case, I hope that there should be a nicer solution.

  Thank you

  Wolfgang

  There is a function in the dialog box & User Interface Palette called Wait for activity on front panel.

  I would use that in its own loop updating a functional global variable (even a local variable or global variable could work).  Whenever it is running, it currently puts in the variable.

  Use another loop to monitor this variable.  If the current time is equal to or greater than 2 hours, the longer stored by this expectation for function FPA, then execute your strategy to stop.

  Looks like you describe something similar.  If you're doing now doesn't work for you, after your VI so we can comment on her one suggest improvements.

• I have a HP IQ504. After some difficulties, IE9 has been installed. I get now update KB2797052 to install several times. 18 times in the last seven days.

  I'm working on a HP IQ504. After some difficulties, IE9 has been installed. I get now update KB2797052 to install several times. 18 times in the last seven days. How can I stop this update to do this? Thank you for your help

  Hi Lenny,

  Were there any changes (hardware or software) to the computer before the show?

  Click on the link below and see if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

  Note: Check the title that indicates How to solve the problem if the update has been installed

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Hope this information helps.

• I get a message saying "drive does not have the ability to access this service and I just paid for 12 months (FOR THE SECOND TIME) in the last two months!

  I get a message saying "drive does not have the ability to access this service and I just paid for 12 months (FOR THE SECOND TIME) in the last two months!

  Hi phillipt84805120,

  Make sure that you have the latest Adobe Acrobat Reader DC (Adobe Acrobat Reader DC install for all versions) installed on your computer to use the services of export to PDF as the older version of Reader support any more.

  Alternatively, you can use services online at https://cloud.acrobat.com/exportpdf

  Let me know if you are still having a problem.

  Kind regards

  Nicos

• Download the time of the last transaction or time of disconnection from the transaction.

  Hi all
  
  I have a requirement to obtain the time of the last transaction incase disconnection of transaction is not present. in a session('XYSCSCSCS') given.
  

  --Below code gets log off time if transaction 'AUTH_LOGOFF'  is present.
  Select to_char(MAX(cpath.REQUESTDATETIME), 'DD-MON-YYYY HH24;MI:SS')
   FROM usersessiondetails cpath 
  Where
  cpath.Userkey=1234
  and cpath.acctnum='ABCDE'
  and cpath.transactionname IN ('AUTH_LOGOFF' )
  and cpath.sessionid='XYSCSCSCS'

  --Below code gets time of last transaction.
  
  Select to_char(MAX(cpath.REQUESTDATETIME), 'DD-MON-YYYY HH24;MI:SS')
   FROM usersessiondetails cpath 
  Where
  cpath.Userkey=1234
  and cpath.acctnum='ABCDE'
  and cpath.sessionid='XYSCSCSCS'

  My needs are
  1. I want to combine these two queries. send using a single query.
  
  Note. Take and and other details are passed to this request of the main request. This sub request shouldn't be deeper. Don't want to question several times table with huge data
  
  Please let me know how I can get it.
  
  Thanks and greetings
  Nana akkivalli.
  
  Published by: Nana Akkivalli, Sep 29, 2011 15:53

  One way might be:

  Select
  to_char(
     coalesce(MAX(decode(cpath.transactionname,'AUTH_LOGOFF',REQUESTDATETIME)),
              MAX(cpath.REQUESTDATETIME)
             ),
     'DD-MON-YYYY HH24;MI:SS'
  )
  FROM usersessiondetails cpath
  Where
  cpath.Userkey=1234
  and cpath.acctnum='ABCDE'
  and cpath.sessionid='XYSCSCSCS'
  

  (COALESCE works as NVL in this case - except that it evaluates only the second expression if you must.) NVL would work as well but will always evaluate the second expression.)

• How to end the movie with the last image?

  Hi all

  Can someone tell me how I can get the last image to congeal, so

  that the video does not go to black?

  Thank you

  Shaul

  If you expand the end of the timeline and move the end of the rear bar of a frame work area, and then export the work area, you should finish on a Blackboard rather empty first frame.

• Why the last image of the exported image sequence is sometimes black?

  I get sequences of images in Photoshop and then exporting them to a file mp4 video.  For some reason, Photoshop sometimes decides to put a black frame at the end of the video, no matter what I try settings.  Sometimes it leaves aside the black frame.  I can't understand why he did this.  If anyone knows how to get rid of this?  When I import the resulting sequences first, I need to change all the frames of black.  Not impossible to deal with, but it is kind of a pain.

  Adobe Photoshop Version: 2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532 x 64

  Operating system: Windows 7 64-bit

  Version: 6.1 Service Pack 1

  System architecture: AMD CPU Family: 15, model: 10, Stepping: 0 with MMX, entire SSE, SSE, SSE2, SSE3 FP

  Physical processor count: 6

  Processor speed: 3200 MHz

  Built-in memory: 8191 MB

  Free memory: 4507 MB

  Memory available to Photoshop: 7154 MB

  Memory used by Photoshop: 70%

  Graphics card: NVIDIA GeForce GTX 470 (with the latest driver Version 347.88)

  Adobe Bridge 6.1.0.116 x 64

  Use, file-> open and checking the box 'Sequence of Image', I am loading a sequence of JPGs I've cropped in Photoshop (using a script to automate this process), and I specify 23.976 fps. I checked all the JPG files, and they are OK. I play the animation in Photoshop, and it looks good.  I then export the movie using the file-> export-> made video, I use Adobe Media Encoder, h.264 format, high quality, 1920 x 1080 (the original document size), 23.976 fps.  It automatically selects the zone selection to export work.  That seems correct.  In a sequence of images of N, it is said that it will export images 0 to N-1, which I think is OK if it indexes starting at 0 and not 1.  I tried to export (frames) checked, and the result is the same.  The last image is black.  I also tried to change the work area to remove the last image and the last frame of the rendered video is so dark, but the last image of the sequence, I opened is missing.  I checked the image sequence that was exported with the area of complete work (or frameworks) selected and all managers are there - with just a framework black, added at the end, which is certainly not in the work area.

  No error message.

  I checked the help, also I tried searching the forums, but I don't know what I'm doing wrong.

  The problem has been around on and off for a few years.  He had disappeared with CC, but now he's back, even though I'm not aware of what I'm doing differently.

• Windows blocks all a few minutes after the last round of updates and latest installation of IE

  I ran the last round of updates of security and the upgrade of IE over the weekend. Now by PC crashes every 4 or 5 minutes. All I can do is to draw power and restart. the problem seems to happen more when messenger, IE, or firefox are used. Before I have to roll back (me is not very far away because I will need to perform these updates at somepoint) y at - it a common cause. I use a Dell Inspiron 1525 laptop

  First try unistalling IE8 and change your update settings:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon

  Mick Murphy - Microsoft partner

• * Flash animation loop but going back to the first image {want to hold on to the last image}

  I came across this article in loop animations = http://www.quip.net/blog/2006/flash/how-to-loop-three-times

  I am a novice with flash and just try to connect to some place ads and make it work for the first time.

  Everything worked for me in the article... the only thing I wanted to do, but you have not found that the answer to how do to stop the animation on the last frame after a loop is completed, instead of automatically return to the first image is?

  What is the most easy/most effective way for this?

  The shutdown script does not work... still goes back to the first image.

  For all my flash ads, imported FLV video... so I don't know if this is a feature for flv / video that auto-rewinds to first frame...

  Thank you very much, really appreciate any idea on it.

  The sooner you can take a minute to return best

  you add your video in the timeline.

  Add a stop() in the correct location works for me: create a new layer, insert a keyframe in this layer to the last video image and add a stop() in Control Panel actions.

• If you create an animation you can loop the last images of this animation if a key is held down?

  OK let's create you a button which, when he is pressed to play an animation of 20 frames realsed if he goes to the framework one and stops when he plays on this animation. in the section allows you to have an animation of fire and you want the home to apear and unless the user sound to the bottom of the animation has reached the end of the time line and loops back and he played the last 5 frames of animation, and once it is loose, it will to and stops at the framework one. Well, I know how to make a button that pressed once play an animation. And I know how to say what is released to and stops to frame a. What I do not know how to do is a loop of the fire on the last images of 5 or 6 so that the user can hold down throughout the day and unfold this animation. Thank you for any wait you may have.

  Just put an order in the last frame to gotoAndPlay (#), where # is some number of frame is 5 or 6 frames at the end

• Use the last image as a scene body 1.5 final

  I would use the very last frame of a clip video as an extended scene, 3 or 4 seconds to disappear at the end of a wedding video. There must be a better way than to paste the clip 120 times, but I can't.

  Any help much appreciated.

  David

  Or cut the last image and stretch it with the extensible tool until the desired length.

• a table of images only the last image shows the index

  Hello world

  I try to index a table of images and all, but the last item gives me the error: "not an image."

  Here is a picture of the vi. The first loop load images and stores them in an indexed auto tunnel. Each diagnosis that I fell on this loop showed that all is well. The second loop must display the image stored in the tunnel sequence indexed auto, but it does not work. Instead, I got the error message that the 0 to n - 1 elements are not images, and only the last image is displayed.

  

  What I am doing wrong?

  Thanks for your help.

  and vi:

  Hello

  This VI has worked well for me with a contribution of 5 bmp files. You can check your input files?

• Is it possible to reset the date of the last virus and update the spyware definitions in XP?

  I have xpsp3.  I was looking at my calendar to find out what day of the week, an event that happens in November, and unfortunately I forgot to go back to the date of the day before I have updated the definitions of viruses and spyware on MSE.  Now, MSE think my latest definitions of viruses and spyware are obsolete, because they were supposed to be updated three months from now.  So my question is: is it possible to reset the date of the last virus and update the spyware definitions in XP?

  Correct the date on your computer. Remove the antivirus/malware product and reinstall.

  -OR-

  To restore before the update, use the system restore. Make sure the date is correct. Update.

  Tom Ferguson

• The web page freezes several times during the operation, recovers after about 3-20 minutes, freezes again. Also, lately, the screen lights up and sparkles in a pink/purple color

  I use Internet Explorer as my search engine and internet as my default msn.ca. The web page freezes several times during the operation, recovers after about 3-20 minutes, freezes again. Also, lately, the screen lights up and flashes in a pink/purple one color recovers to normal in 30 seconds approximately. I had an attempt of technician paid for help but couldn't. Can anyone help? Thank you

  Go to start / Control Panel / Internet Options / Advanced section then check the top box rendered = software use instead of gpu rendering / apply then OK.

  Restart all open windows ie11.

  For memory, Bing is a search engine ie11 is a browser and msn... is a home page.

  Any other number symbol use Gear and manage add-ons and toolbars and extensions and disable Adobe Shockwave element

• Camera: Find the last image?

  Hello

  Are there examples of how to find the last image taken after invoking the camera?

  Thank you

  Hi and welcome to the forums!

  If you take the picture and save, and can't find it? Or you take pictures

  Return to the back and you want to know where they are stored as you pull?

  Go to the media and click the photos, as soon as the images are displayed

  Highlight it, click menu, properties. It will show you, device, media and file

  and size.

  You can set the previous directory. Unit > menu button > options.

  Here you can set options for the camera with flash, color, size, and storage in the

  media folders,

  Thank you

  Bifocals