Impossible to pass data in an iteration

Similar Questions

• IPS is impossible to pass the signature

  MY client pointed out that IPS modular is impossible to pass the signature in the ASA5510, there already purchase the license.

  Can I upgrade the IOS ASA or do something else?

  What is the formal process to solve this problem?

  the error is as below:

  Cannot upgrade the software on the sensor.

  -This upgrade must be installed on a sensor with 4 engine version

  The currently installed version of engine is 1.

  SLPG-BOH-AIP # show version

  Application partition:

  Cisco Intrusion Prevention System, Version 7.0000 E1

  Host:

  Domain keys key1.0

  Definition of signature:

  Update of the signature S302.0 2007-09-17

  Virus update V1.2 2005-11-24

  OS version: 2.4.26 - IDS-smp-bigphys

  Platform: ASA-SSM-10

  Serial number: JAB09410434

  License expires on: 26-Sep-2011 UTC

  Sensor time is 192 days.

  With the help of 609878016 of 1054670848 memory available bytes (57% of use)

  system is using 17.4 M off 29,0 M bytes of disk space available (60% of use)

  the application data uses 45.0 M 166,8 M bytes of disk space available (28% off

  its use)

  start using 35.2 M off 68.6 M bytes of disk space available (54% of use)

  MainApp to Z-2007_SEP_26_11_54 (press release) 2007-09-26 T 12: 09:32 - 0500 Ru

  nning

  AnalysisEngine-Z-2007_SEP_26_11_54 (press release) 2007-09-26 T 12: 09:32 - 0500 Ru

  nning

  2007_SEP_26_11_54-Z-CLI (release) 2007-09-26 T 12: 09:32 - 0500

  Upgrade history:

  IPS - K9 - 5.1 - 7 - E1 10:24:03 UTC Friday, August 5, 2011

  Version 1.1 - 7, E1 0000 recovery partition

  SLPG-BOH-AIP #.

  You must upgrade the IPS module to the latest version first before that you can update the signature. The current version of 7.0000 E1 software is very old, and the latest available version is now 7.0.5a (E4). E1 engine is very old and is not compatible with the signature that runs on the E4 engine.

  Here are the release notes for 7.0.5a (E4):

  http://www.Cisco.com/Web/software/282549758/50172/IPS-7_0-5A-E4_readme.txt

  You need to upgrade the module running at least version 5.1 (6) E3 before you can upgrade to 7.0.5a (E4).

  Once the IPS module has been upgraded to version 7.0.5a (E4), you can update to the latest signature.

  I hope this helps.

• How to pass data (more effective) autour

  Hello
  I wonder how to pass around large data around across the application.

  For example:
  1 data or data of my analog channels
  (I have a lot of screws that will process these data of waveform)
  Is it not wise to spend around analog continuous data?

  2. What if you want to process digital data?
  (I must treat these unique bits in several screws, for example,)
  security door bit, stop bit of emergency, must be treated as higher priority than screw
  input 1, selector, etc.).

  Or you have any suggestions, what type of data I should use. I have a
  global impression screw actually write these digital data in a file, then
  These files are passed around?

  3. is there a mechanism that pass around data in memory, NOT in the files?

  By far, the way the more effiecient to pass data autour is a thread.  If you are really worried about memory, then you must avoid the connection of the wire that he holds the large amount of data.  This could mean making your processes in series (one at a time) passing the data of one Subvi to another via the controls and indicators and the connector pane.

• Pass data to Image update Subvi VI main

  I try to get under VI containing a for loop to pass data to an indicator on the main VI update. I followed this explanation...

  http://digital.NI.com/public.nsf/allkb/0F4EA104660C0AF38625726F0069B27E

  .. .and am able reproduce the example with a digital command, but I was not able to extend the example to an indicator of image output. I suspect that I use the control bad, Refnum reference or property. Can anyone suggest corrections?

  Details:
  I use a control reference [line] to a [Picture] indicator of my main VI [Center of manufacturing] to the Subvi [SUB mask display].

  I placed a Refnum control on the front of the sub - VI, he linked to a property on the block schema node, selected the property "Value" and hooked up the output of the image of a VI IMAQ to this property.

  If 'Run of Images' on the sub VI is set to FALSE, a static image 'test0.jpg' must be returned to the main VI. If 'Run Images' is set to TRUE, a loop is supposed to pass 'test0.jpg', "test1.jpg", etc. to the main VI at regular intervals. Instead, the indicator Image is empty.

  Hi MaryamAli,

  I think you are doing everything correctly but you are having your image inside the Subvi so the will of image ever seen in the main VI. Try to remove the IMAQ dispose VI in your TRUE and FALSE cases and see if it works.

  Tim O

• What are the parameters? How are Variables differenet? Why we can not use variables to pass data to one sequnece to another? What is the advantage to use parameters instead of Variables?

  Hi all

  I am new to TestStand. Still in the learning process.

  What are the parameters? How are Variables differenet? Why we can not use variables to pass data to one sequnece to another? What is the advantage to use parameters instead of Variables?

  Thanks in advance,

  LaVIEWan

  I'm sorry... I discovered that... its not at all possible to pass data to another sequence using variables... it must be through settings... once again I apologize for the display of such a stupid question

• Pass data to another loop event loop

  I'm trying to find a simple way to pass data to a loop of events for use elsewhere.  Could someone explain to me why my example below block (code attached)?  I feel that I must be missing something simple.  Also, I would rather avoid queues, if possible, because they seem unnecessarily complex.  Thanks for your help!

  

  The second loop will not run until the first is done. Use the performance highlighting and you can see. You can use a local or a vi to register the data in. Here's a quick example with the help of a local.

• How to pass data to LabVIEW teststand Hex

  Hello

  Is it possible to pass data Hex Teststand to a LabView VI.

  In the column 'Type' of the Module tab on the stage, I only have the options "ASCII" or "binary string".

  What I need to change my VI to take the hex data, or can I change the Type of TestStand so that I can enter the Hex data

  When I enter the Hex data directly in the VI, it works fine.

  Thank you

  Sound advice from Omar! If you decide to follow this method, here's a useful KB...

  How to convert between hexadecimal and ASCII in LabVIEW

  http://digital.NI.com/public.nsf/allkb/894CF5FE064971BF8625758400014993?OpenDocument

• Core 1 page 9-4: "...". pass data between parallel patterns... »

  «.. . If allows you to pass data between parallel block diagrams... son"this can be done?

  They mean transfers data between parallel loops/structures?

  The question is a Hue. It is not parallel, using wires. Two loops are not connected is perhaps parallel. We read your table of contents it a game of guessing on the sentence of your thread. Maybe if you get into the details.

• Pass data between panels

  I have a digital slide on a Panel. When I move the cursor, I need the value update on another Panel.

  How can I do this?

  The two panels are loaded as a senior-level windows.

  It seems that I read something on the use of queues to pass data between the panels, but I can't seem to find where I read that.

  A basic concept that differentiate the CVI to other languages, it's that there is no relationship between a sign and a specific source file. I mean, you do not need to put a sign functions in a specific source file: they can be spread over multiple sources; Conversely, you might have a source only that collects reminders for all panels of files in your application. What readers recall execution are Panel handles and control ID. (One effect of this paradigm is, you might have a reminder installed on controls on different panels).

  For this reason, there is no problem by putting the cursor callback in panel1.c. In addition, you can call the file source in a different way.

  Arriving at the base of your problem, a DAQ multithreaded application is really different from a UI single-threaded application.

  Put the functions of data acquisition in a separate thread can be beneficial for your application, because they are not likely to suffer user interface events.

  CVI provides also the different methods of transmission of data between threads. the most powerful in data acquisition applications is probably a Thread Safe queue.

  I suggest you look at Programmer's Reference > chapter of the creating multithreaded Applications to aid, where the basic principles of programming are explained multithreaded and information are provided on all instruments CVI includes.

  If you want to discuss on this scenario, I suggest yu to start a new thread, as it has nothing to do with the original question with which you started this discussion.

• pass data from childCardDone to a textfield in QML?

  I have a card camera call function that responds with the path of the image once a picture is registered using the childCardDone function.  I have no idea how to pass data from c ++ to qml.  I know that during the passage of the QML for C++ database, you set a QString & something.  How can I do the reverse?

  Here's my CPP code:

  void App::childCardDone(const bb::system::CardDoneMessage &message)
  {
      if (message.reason() == "done")
  
  //      Need the message.data() info in my QML
       message.data();
  
      qDebug() << message.reason() << "\n";
      qDebug() << message.dataType() << "\n";
      qDebug() << message.data() << "\n";
  }
  
          public slots:
          void childCardDone(const bb::system::CardDoneMessage &message);
  

  and I just want to get the value of message.data () into a textfield label in QML:

  Label{
  id: capturedFilePath
  text: <>
  }
  

  All help is appreciated and will be loved and accepted as a solution if it works.

  Thanks in advance.

  For use in your function you will need to decalre in the header.

  In the header to declare,

  AbstractPane * root;

  Then, change

  AbstractPane * root = qml->() createRootObject;

  TO

  root = qml-> createRootObject();

• Pass data to SessionIO - ReadXDS, WriteXDS - 10.2 XDS

  Hello
  
  We try to pass data to the OPA by using the XDS file. Basically, we have developed a dynamic UI .NET MVC application that uses a modules developed in the OPA.
  Some of the responses to the interview come from the sqlserver database and should be sent to the OPA and the questions corresponding to the answers provided has not must be requested during the interview.
  
  Currently, send us the data to the OPA by identifying screens with a hard coded comparison "title screen" fine interview and pre-fill data based on .NET application. But, it is not flexible and we do a lot of coding to do this.
  
  We try to transmit data instead of using file XDS. That we used 10.1 ReadXDS and WriteXDS to achieve this. We had problems with the controls of the entity-containment ({"entity Instance is no model: employer [global0]"}) and we hoped that it resolves to 10.2.
  
  Checking the dll Oracle.Determinations.Util.xds 10.2, it seems that ReadXDS is removed from the SessionIO. And we do not know why they were removed, and what other alternatives we must spend data if XDS files.
  
  Thanks in advance for your help,
  
  Kind regards
  Yonas
  
  Published by: user13358619 on February 11, 2011 09:25

  Hi John,.

  There are a couple things to note on this topic. First of all, Oracle.Determinations.Util is undocumented because it is not considered by us to form part of the public API of the determinations engine. Therefore, we don't feel any obligation to maintain backward compatible and can choose to rename, delete or modify anything in this package at our discretion, what happened to the point 10.2.

  Second, as is clear, when the engine Interview using third parties are not allowed to directly change the Session State of engine determinations - instead they must provide the methods provided by the object Session Interview himself. The SessionIO done exactly that by loading the XDS file content directly into the Session of engine of determinations. Is not only to cause problems with the instance of the entity as you describe but will cause all data that you have mapped this way be lost in the event that a transaction must be fully restored in the Interview Session at any point during the investigation (for example, an error event is triggered).

  The engine of the Interview to load data via an XDS file by using the XDSDataAdaptor class, which can help you along the way. I don't know how you came up with the current solution, because it relies on the undocumented API. However, if it was based on the advice you have received from us, I apologies for the misinformation.

  Thank you
  Kristy

• Passes data from leaf of great pl/sql procedure as a parameter.

  Hello
  I use ORACLE Database 11 g and RHEL 5.
  
  I have a procedure in my database that will update the table required for a single value, which before the end users (Java). Now I want to change it to update several records in 'BULK'.
  
  I studied the SQL Loader and knowledge. But this time I want to insert data into an oracle table excel, if I want to pass data from excel to a procedure as a parameter. I also do this process in BULK mode.
  
  Here is an example of code that take input for a front end value and updates the table...
  

  PROCEDURE TAB_UPDATE (SYMBOL     IN SYMBOL_INDEX.SYMBOL%TYPE,
  END_DATE IN SYMBOL_INDEX.END_DATE%TYPE)
   IS
   BEGIN
       V_QRY1 := '';
       V_QRY2 := '';
       V_QRY1 := 'UPDATE SYMBOL_INDEX';
       V_QRY2 := 'SET END_DATE = '''||END_DATE||''' WHERE SYMBOL_IDENTIFIER = '''||SYMBOL||''' AND END_DATE IS NULL';
       PRO_EXEC(V_QRY1,V_QRY2);
   EXCEPTION
    -----------
   END TAB_UPDATE ;

  Now this simple plsql code of the procedure updates a record at a time, whenever the user needs to insert a new value of front end to update its value.
  
  Please suggest me how to perform this procedure to take value of parameter of an excel sheet and also update all records in BULK.
  
  Should I use varrays? If possible, please give some links or code samples...
  
  
  Thanks in advance!

  I don't know, because I can't test it now, but you say STAGE_ID (the last column) ends by "," while in your data there is no comma after the last value. You can try to add a comma and load again?

  Marcus

• The best way to pass data when browsing

  By taking the case where an action method is called and he chooses navigate to another page.
  
  What is the best way to pass data from bean of old media to the new (probably in the execution of the action method)? I am currently using beans of spring session scope as the support of beans.

  Take a look at:

  It goes between your commandLink or commandButton control:

  
  
  

• Marshall plan: how to pass data between the main field and sub-application

  Hello

  I'm trying to load a Flex 3.5 application in Flex 4. In the process, I need to move a strong local typed object from main application to the loaded swf file. And I also have to pass a rope and a bitmap of application sub to the main application. Have an example to show how to pass data in the application domain?

  Thank you

  SW

  Define scaleContent = true, set a breakpoint on SWFLoader.as:doScaleContent and

  see if he thinks there's a swfBridge.

• Pass data from one XML object to an itemRenderer

  I'm trying to color the background of a column in a datagrid, and we found a sample file that illustrate the concept. However, the sample has data stored in an arrayCollection collection, while mine is in an XML object. The problem is that the data from the sample file apparently automatically passed to the itemRenderer (below: notice the trace statement). My XML object does not automatically pass to the itemRenderer data. So my questions are:

  1. is there a simple way to pass data stored in an XML object to an itemRenderer

  or

  2 should I convert my XML an arrayCollection collection? If Yes, what is the best way to do it - I tried the following, but without success:

  < mx: Model id = source = "example3.xml" / "xmldata" >
  < mx:ArrayCollection id = "myAC" source = "{ArrayUtil.toArray (xmldata. Example1)}"/ >

  Here is what the XML looks like:

  < TABLE >
  example < 1 >
  < Difficulty > 0,5 < / difficulty >
  < discrimination > 0.7 < / discrimination >
  < item 3 > < / point >
  < / example1 >
  < /table >

  Here is the itemRenderer:

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:Label ' http://www.Adobe.com/2006/MXML ">
  
  <!--
  This element converter simply extends label and overrides the updateDisplayList function
  draw a filled rectangle of gradient. The colors of the gradient are determined from the
  data.
  ->
  < mx:Script >
  <! [CDATA]
  
  to import flash.geom.Matrix;
  import flash.display.GradientType;
  import flash.display.Graphics;
  
  override the updateDisplayList(unscaledWidth:Number,_unscaledHeight:Number):void function
  {
  super.updateDisplayList (unscaledWidth, unscaledHeight);
  
  var m:Matrix new matrix());
  m.createGradientBox (unscaledWidth, unscaledHeight);
  
  var Graphics = g:Graphics;
  trace("Data.COL3="+Data.col3)
  var colors: Array = (data.col3 < 2000? ([0x0000CC, 0x0000FF]: [0x00CC00, 0x00FF00]);
  
  g.Clear ();
  g.beginGradientFill (GradientType.LINEAR, colors, [0.2,0.6], [0,255], m);
  
  the rectangle is drawn a little high and a bit large to compensate for the gap
  the DataGrid control is introduced between the rows.
  g.drawRect (0, -2, unscaledWidth, unscaledHeight + 4);
  g.endFill ();
  }
  []] >
  < / mx:Script >
  < / mx:Label >

  This code example should answer your question of how to import data in the renderer automatically. It is through the dataProvider of the DataGrid and then refer to it in the renderer in the form of data. XYZ, where XYZ is the field in the XML file with the data. See FB 3 help sys on the e4x syntax.

  -mainapp.mxml-

  -MyLabel.mxml-

  -data2.xml-

  
  
         0.5 
         0.7 
         3