Impossible to reinstall Adobe Story after the restart of my operating system-mac

Similar Questions

• Make sure you get all your drivers after the upgrade of your operating system

  I've seen a lot of post lately in which users try to upgrade their operating systems (Vista-> Windows 7 or Windows 7-> Windows 8).  Often the hardest part of this upgrade is to make sure that you get all of the available drivers and software in order to use the material.

  You can always download software and drivers for your laptop computer manually by visiting the HP support Web page and search for your laptop in the product number.  This document shows you how to locate the number for your product.
  
  However, the best way to download and install the software for your laptop is to use HP Support Assistant.  This application comes pre-installed on most computers but portable consumer is likely to be absent after a clean install or upgrade the operating system.  It will search all the drivers and other software that can use your laptop as well as updating existing drivers/software.

  I hope that you will find useful information.  Have a great day!

• Impossible to install HP F2100 to the computer message mobile operating system installed.

  Cannot install the old printer to the new laptop with Windows 7. The printer is HP F2100. Any suggustions? Not ready for a new printer again. It worked with my old top office when my monitor leave me. I used to have windows Vista.

  Have you tried with this software?

  http://support.HP.com/us-en/document/c01796821

  If this does not work, try this.

  http://support.HP.com/us-en/document/c02691615

• Bought Adobe DC after the trial, after download receive: you have Adobe Acrobat DC (continuous) is already installed.  Please uninstall this product before proceeding with this installation.  Perhaps because the trial was under different Adobe ID?

  Bought Adobe DC after the trial, after download receive: you have Adobe Acrobat DC (continuous) is already installed.  Please uninstall this product before proceeding with this installation.  Perhaps because the trial was under different Adobe ID?

  Sign out of your account 'other '... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account "nine"... Reinstall

• VIB not updated after the restart - ESX6

  Hello

  I have a strange problem while updating to ESXi600-201511401-BG on 1 of 3 guests. It seems that the fix is installed correctly, but it disappears on the next reboot.

  
  

  The commands I tried to help include, but none of them seems to work:

  esxcli software update /vmfs/volumes/path/Update/ESXi600-201511001.zip esx-base - d - n vib

  and

  Profile of esxcli update d software /vmfs/volumes/path/Update /ESXi600 - 201511001.zip - p ESXi - 6.0.0 - 20151104001-standard

  The result is:

  Message: The update completed successfully, but the system must be restarted for the changes to be effective.

  Restart required: true

  VIBs installed: VMware_bootbank_esx - base_6.0.0 - 1.22.3247720

  VIBs removed: VMware_bootbank_esx - base_6.0.0 - 1.20.3073146

  VIB list after installation check seems to be updated, but after the restart, he returned to the old version.

  All guests were built fresh at about the same time using the same media however, this server has a problem. By comparing each server the only difference in VIBs is VMware_bootbank_esx-base. Everything else is the same...

  Any help would be appreciated.

  Thank you

  Derek

  VMware technical support identified the error "MSI - X not supported by the device" in boot.gz and recommended to update firmware or try to reinstall. As the host was running the same firmware as the hosts who have been updated and not happy with the way recommended reconstruction of the host, I did some research in error.

  A bit of googling suggests that the error relates to USB interrupts, which lead me to realize that it was the only server currently connected to a 16 ATEN KVM (cables VGA/USB) port. After unplugging the KVM, I was able to apply successfully the update...

  If anyone else has this problem and has devices connected to USB ports, I would disconnect them and try the upgrade again.

• Reinstall Acrobat 9 after the new operating system installed

  Need to reinstall Acrobat 9 after the new operating system installed

  If it's acrobat pro and, if you follow the 7 steps you can dl a free trial here: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

  and activate it with your serial number.

  If you have a problem dl'g, you don't follow all 7 steps.

• You Tube is not playing video on Firefox with Adobe Flash after the last update

  You Tube and other sites do not play video on Firefox with Adobe Flash after the last update for both. Adobe Flash works on other sites but not You tube and sites that can have embedded videos from You Tube, I'm not sure.

  Adobe Flash not crushed and no error message is visible. All that shows is a black screen for Flash video. Make a right click of the screen shows only a non-interactive 'a film has not loaded' and the clickable link to the home page of Adobe.

  I spent an hour trying things as suggested for past problems similar to this, but none helped.

  I sent sad face, letting you know what I think of the last update for this reason which explains pretty much the same thing, as I have said here.

  I have no other info but if I had a form any entry and queries you I might be able to provide more.

      I think the Flash 12.xx is a phantom. I can't find it on my comp. Only 13.xx shows anywhere but on the Pugins page in Firefox.
  
  

  Weird. I have no idea why it does that. Your list of details of the system shows that 13.0.r0 Flash.

     About the .Js I cannot find a User.JS in the profile folder but ther is a user.bk and other files that have.json. Should I do anything with these? 
  
  

  If you don't, that's okay. Leave all of the files.

  Does disabling HA in Flash and Firefox work better for you now or even not playing it?
  
  Make sure your firewall is not something Firefox blocks.
  
  This happens in other browsers as well?

  The site appears your version of Flash player and your operating system?

  • http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Here is what mine looks like
  
  

• I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP.

  Original title: someone help please?

  Working on my old computer, a pentium 4, card mother GA81PE1000, I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP. After so many years, working on the construction of computer & repair, it's new to me.

  So I checked the Microsoft Website for answers from people with the same problem in the past and apply their suggestions, nothing works... hard drive replaced, the changed value in the bios, did everything possible, still nothing works, phenomenal for me, please help me find an answer, thank you?

  Hello

  1. have you made changes on the computer before this problem?
  2 - what you want to say that you receive this error message during the installation of Windows XP?

  Check to see if the following is useful.

  Method 1: Disconnect all devices non-essential connected to the computer and restart. Check to see if it boots normally.

  Method 2: You may need to check the settings of the BIOS (Basic Input\Output System). Check if the hard drive is detected. If this is not the case, check the physical connections. Refer to the manual to check the same.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  The following article might be useful: "Error loading operating system" Error Message When you restart your computer during installation

• How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  Hi Carol_971,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  I suggest that you try to start in safe mode and then try to log on to Windows using the default Administrator account and then remove the password for your account, check if it helps.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If you are unable to log on to Windows in safe mode, refer to the article below and then try the steps mentioned, check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

• Whenever I try to enter KB2559049 it always gets back after the restart, saying "NOT CONFIGURED".

  original title: HELP... (seniors not if nobody PC)!

  Whenever I try to enter KB2559049 it always gets back after the restart, saying "NOT CONFIGURED" and then it lands in the updates page... So I used the Microsoft Fix - it tool and she is 'THE PLACE WHERE WINDOWS STORES DATA has CHANGED AND MUST BE FIXED... CHANGE OF PLACES in UPDATE from WINDOWS to THE SETTINGS by DEFAULT in WINDOWS'... well I think, but I don't know how the making and tool Fix - it didn't tell me how is... Please someone can help me to what is necessary.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 2:

  Try to download the update from this link and install the update manually and check if it helps:

  http://www.Microsoft.com/download/en/default.aspx

  It will be useful.

• When you export from adobe story to the final draft, there are numbers rolling down both margins. How can I get rid of them?

  When you export from adobe story to the final draft, there are numbers rolling down both margins. How can I get rid of them?

  So that we can suggest an appropriate workaround solution, we would need to have a look at your script of history

  Can you please mail version ".stdoc" of your script of history we at [email protected] ?

  You can export your Story script in the format '.stdoc' by ' file > save to disk ' option

• I can't import my script (film) into Adobe Story. The error message says that I am unable to connect to the Adobe servers. Is this a problem with the Adobe?

  I can't import my script (film) into Adobe Story. The error message says: I am unable to connect to the Adobe servers. Is this a problem with the Adobe?

  Yes and no it seems that if the file is a .doc or .pdf, that it does not load properly. But if I bring him in a Final Draft format, it works perfectly.

  Adam

  Sent from my iPhone

• If I buy one Prime Minister prepaid by annual pro adobe application, after the after the end of the subscription of one year it would be possible to use the program without updating or should I pay each year?

  If I buy one Prime Minister prepaid by annual pro adobe application, after the after the end of the subscription of one year it would be possible to use the program without updating or should I pay each year?

  You will not be able to use the program after the end f the subscription, unless you continue to subscribe.  The only way to use Premiere Pro without subscription is to buy the CS6 version.  Remember that projects CC is not properly open to the CS6.

• Adobe, your after effects CC does not work with Mac OSX Mavericks!

  Adobe, your after effects CC does not work with Mac OSX Mavericks!

  Have you installed the 12.0.1 update yet?

  http://helpx.Adobe.com/after-effects/KB/effects-launch-Mac-OS-109.html

• Adobe CS 5 design premium on the latest operating system Mac Os Sierra? (was: Hi!)

  I would check if Adobe Creative suite design premium 5 will run on the latest operating system Mac Os Sierra?

  You can see other users, http://roaringapps.com/apps:table experiences

  and, if you try to install, follow these steps

  http://Mac-how-to.WonderHowTo.com/how-to/open-third-party-apps-from-unidentified-Developer s-mac-os-x-0158095.

  [left the general debate to connect for download, installation, commissioning]