Impossible to select the host for the pool, can only select Cluster
Hello
I try to assess the view and go into the Guide of the evaluators. When I set up the parameters of resource under the vCenter part settings of the linked Clone Pool where I'm supposed to be able to select a host or a Cluster, I have only the option to select my (not an individual host) cluster. The problem is that not all hosts in my cluster have access to the SAN that I use for this assessment, so I wanted to be able to isolate the pool to a single host. Is there some kind of trick to get the hosts present themselves individually? The hosts are 5.5 ESXi and vCenter vCenter 5.5 Standard
Thank you
Dylan
You can only select the cluster. "Host or a cluster" refers to the fact that if you have a stand-alone Host which is not in a cluster, you can use - so you'd have to move the host you want to use on a stand-alone host or in its own cluster.
Mike
Tags: VMware
Similar Questions
-
"Save history" set to 30 days but can only view last 7 days of history - how can I view the longer history of 7 days?
According to your troubleshooting info, you have 2 set preferences to update the:
Browser.history_expire_days
7Browser.history_expire_days. Mirror
7In the address bar, type Subject: config and press ENTER. The subject: config "This might void your warranty!" warning page may appear. Click on that I'll be careful, I promise! to continue on the subject: config page.
Search for the preference browser.history_expire_days. Right-click on it and select reset. Do the same for other preferences. -
After that the last version of Firefox all amplified, I used the add-on of NoSquint (60%), which makes web pages now as they did before. However, if the two albums at the top of the screen are of normal size, the lower ones are too big. The bar that contains the URL on the left and a Google search on the right space, for example, to view only the first two letters of a URL (after the / /).
How can I make these bars look the way they used to? Thank you.
To adjust the font size for the user interface, you can use the extension of theme font & size changer .
This solve your problems? Please report to us!
Thank you.
-
Hello
Should I create a user who can only read the tables in another schema. (this schema has 65000 tables and I want to avoid execution grant select on table1, table2... to MYUSER).
Then, I created a trigger:
Any way to restrict it to read-only? How can I revoke Insert or UPDATE?CREATE TRIGGER set_empno_ctx_trig AFTER LOGON ON DATABASE BEGIN IF USER='MYUSER' THEN execute immediate 'ALTER SESSION SET CURRENT_SCHEMA = SCHEMA'; END IF END; /
I published that follows, but does not work and the user can INSERT:
Thanks for the help.CREATE TRIGGER set_empno_ctx_trig AFTER LOGON ON DATABASE BEGIN IF USER='MYUSER' THEN execute immediate 'ALTER SESSION SET CURRENT_SCHEMA = SCOTT'; execute immediate 'REVOKE INSERT ANY TABLE FROM MYUSER'; END IF END; /
user522961 wrote:
I thank once again.For the first query cannot send the result. MY_WRITE role is a role with:
GRANT SELECT, insert, update, delete any table. Without which MYUSER cannot see the tables in the SCHEMA. MY_WRITE revoked if:So, what's you want? You cannot revoke insert, update, delete the grant of the user, if they are granted by a role.
Grant select any WHAT TABLE or SELECT ON
. the role of the user and revoke.
He will be able to choose, but not change data. -
The user can only download the columns that I choose?
Hey, guys:
Is that possible I put somewhere in the APEX so that the user can download only the columns that I choose instead of all the columns in the report, that this user can see, like some columns of links that directs the detailed individual pages? It makes no sense for the user to see these columns in a CSV file.
Thank you.
Sam
Published by: lxiscas on May 20, 2013 14:24
Published by: lxiscas on May 20, 2013 14:26lxiscas wrote:
Is that possible I put somewhere in the APEX so that the user can download only the columns that I choose instead of all the columns in the report, that this user can see, like some columns of links that directs the detailed individual pages? It makes no sense for the user to see these columns in a CSV file.
For standard reports, use the property to include export in the column definition.
To view interactive reports + {message identifier: = 10556630} +.
* When it comes to 'reports' always make it clear if you use a standard or interactive report.
-
Hi all
I have 02 questions.
1. we have a cluster which has 02 physical hosts (Host1 and Host2). We have 02 virtual machines on the Cluster. Active DRS on the cluster.
But the problem is that my 02 VMS are always stays on a Host2. A few weeks ago, each virtual machine carried out on each host. How can I place each virtual machine on each host to perform better.
How to do this?
2. I connect to the cluster using vSphere client 5.1, under summer host, I get the following message
"Configuration problems: host is not in accordance with the attached profile.
I suspect that this is the case for my question 1?
Thank you very much
Hello
I think I found the answer for the problem of home profile. I changed the following values to 1 for each host to > settings > under software > advanced settings >
Under Data Mover
HardwareAcceleratedInit
HardwareAcceleratedMove
Under VMFS3
HardwareAcceleratedLocking
Compliance status is returned to the green.
Thanks for the advice guys!
Thank you
-
During the update to VMware Player 4.0.3 I get this error for vmnet-only compilation. I found a patch for 4.0.2 and a similar compilation for the last error update 4.0.2 but not for version 4.0.3. Any tips?
JOURNAL / usr/bin/make-j - C/tmp/vmware-root/modules/vmnet-only self-build SUPPORT_SMP = 1 HEADER_DIR=/lib/modules/3.3.2-6.fc16.x86_64/build/include CC = / usr/lib64/ccache/CCG GREP = / usr/bin/make IS_GCC_3 = no VMCCVER = 4.6.3
Using 2.6.x kernel build system.
make: entering directory ' / tmp/vmware-root/modules/vmnet-only»
do /lib/modules/3.3.2-6.fc16.x86_64/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. \
MODULEBUILDDIR = modules
make [1]: Entering directory ' / usr/src/kernels/3.3.2-6.fc16.x86_64'
CC [M] /tmp/vmware-root/modules/vmnet-only/userif.o
CC [M] /tmp/vmware-root/modules/vmnet-only/netif.o
CC [M] /tmp/vmware-root/modules/vmnet-only/filter.o
' / tmp/vmware-root/modules/vmnet-only/userif.c: in function ' VNetCsumCopyDatagram ': '.
«/ tmp/vmware-root/modules/vmnet-only/userif.c:520:3: Fehler: Inkompatibler Typ as 1 Argument von "kmap «»
«include/linux/highmem.h:48:61: Anmerkung: ' struct page * 'works, aber hat type Argument' const struct < anonymous > «»
«/ tmp/vmware-root/modules/vmnet-only/userif.c:523:3: Fehler: Inkompatibler Typ as 1 Argument von "kunmap «»
«include/linux/highmem.h:54:60: Anmerkung: ' struct page * 'works, aber hat type Argument' const struct < anonymous > «»
make [2]: * [/ tmp/vmware-root/modules/vmnet-only/userif.o] Fehler 1
make [2]: * Warte auf noch nicht processes going...
' / tmp/vmware-root/modules/vmnet-only/filter.c:60:16: Fehler: "THIS_MODULE" ist yesterday nicht deklariert (nicht in einer Funktion).
make [2]: * [/ tmp/vmware-root/modules/vmnet-only/filter.o] Fehler 1
' / tmp/vmware-root/modules/vmnet-only/netif.c: in function ' VNetNetIfSetup ': '.
' / tmp/vmware-root/modules/vmnet-only/netif.c:134:7: Fehler: unbekanntes Feld "ndo_set_multicast_list"in the Initialisierung angegeben.
/tmp/vmware-root/modules/vmnet-only/Netif.c:134:7: Warnung: Initialisierung von inkompatiblem Zeigertyp [standardmassig aktiviert]
/tmp/vmware-root/modules/vmnet-only/Netif.c:134:7: Warnung: (nahe der Initialisierung as"vnetNetifOps.ndo_validate_addr '") [standardmassig aktiviert]
make [2]: * [/ tmp/vmware-root/modules/vmnet-only/netif.o] Fehler 1
make [1]: * [_module_/tmp/vmware-root/modules/vmnet-only] error 2
make [1]: leaving directory ' / usr/src/kernels/3.3.2-6.fc16.x86_64'
make: * [vmnet.ko] Fehler 2
make: leaving directory ' / tmp/vmware-root/modules/vmnet-only.- Download this archive: http://weltall.heliohost.org/wordpress/wp-content/uploads/2012/01/vmware802fixlinux320.tar.gz
- Extract archive
- Edit the file patch - modules_3.2.0.sh. Look for the line
plreqver=4.0.2
and to takeplreqver=4.0.3
- Save the file, and then run it.
sudo ./patch-modules_3.2.0.sh
I have this picked up on the Internet and it worked for me, as I had the same problem after upgraging my Linux Distro.
Caveat Emptor
Thank you
Sky
-
my computer tells me it cannot find confisxml in big fish game Manager and that he cannot find servers
Hello Shirley,
Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Big Fish Games and would be better suited to support community. Please visit them on their site to find a community that will provide the support you want.
JohnD
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows XP cannot see that the internet can only see LAN
We have a small network in my house. My router was set to WEP security (I know its too old, but my windows xp laptop computer does not work with WPA or newer). And I also added mac filtering for more security addresses. This network has worked well for 2 years.
Meanwhile in a cell phone (that has windows XP sp3) so its wireless network broke, and we couldn't get living, then we just plugged on the router via a cable.
Recently I had to reset my router because I forgot a password and I could add anything to the mac filter list.
After that, I put at 'the original' for example WEP + mac filtering (only the passwords have been changed).
Now everything is working fine, 2 laptops (both Windows 7 a), 2 readers, network all our phones smart etc can connect again, the only laptop (with Windows XP) problem.
The XP laptop can see LAN (two disks) and router only (ping works), but in any browser (firefox, chrome, iexplorer) give me a Web site cannot loaded in the background: error 105, Err_name_not_resolved.
I tried names ping (google.com) and different ip addresses (for example my ISP dns server address) but I get no answer 100% packet loss. I tried a lot of things that they did not help
(1) has tried to change my XP for some fix + fix dns ip (I found these adressis in my router configuration/network configuration)
(2) then I put back to dynamic ip once again in the line of cmd ipconfig release, ipconfig/reset, etc., I checked all addresses was going well everywhere (I mean gateway, DHCP server, dns server, looked well with dynamic ip too)
(3) then I found similar position
http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-Networking/cannot-ping-outside-my-local-network/de73a1f9-ef4b-E011-8dfc-68b599b31bf5
so I tried also what is in the post
"netsh winsock reset" "netsh int ip reset" then "ipconfig/flushdns" then restart computerNothing helped so I registered here, maybe I answer.
you might need this information:
the laptop has Windows XP service pack 3 language _german_Cisco EPC2425 router is
The two networks wdstorage discs + mybookworld... I think they are the two Western Digital stuff. I'm not sure, I can look after if its important (I don't think)
So, I got two disks still attached. (so 3 connection of the UTP in the router is used, two for disks for the windows XP laptop)If something is not clear, ask me please
Thank you for your answer
RobertHi Robert,.
Thank you for updating us the status of the case.
I suggest that temporarily disable you the firewall.
I recommend you to test name resolution
A DNS server provides host name resolution. If you cannot connect to a server on the Internet by using its FQDN, there could be a problem with the DNS configuration of your dial-up connection to your ISP or DNS server of your ISP.
To determine if there is a problem with the DNS configuration of your dial-up to your ISP connection, follow these steps:
a. at a command prompt, type ipconfig/all, and then press ENTER to display the IP address of your DNS server. If the IP address of your DNS server does not appear, contact your ISP for the IP address of your DNS server.
(b) to verify that your computer can communicate with your DNS server, ping IP address of your DNS server. The response looks like this:
Rattling #. ###. ###. # with 32 bytes of data:
Response to #. ###. ###. #: bytes = 32 time = 77ms TTL = 28
Response to #. ###. ###. #: bytes = 32 time = 80ms TTL = 28
Response to #. ###. ###. #: bytes = 32 time = 78ms TTL = 28
Response to #. ###. ###. #: bytes = 32 time = 79ms TTL = 28The series of digital signs (#. #. #. #) represents the IP address of the DNS server.
If you can't ping the IP address of the DNS server successfully, contact your ISP to verify that you are using the IP address and the DNS server is working properly.
When you have verified the correct IP address of your DNS server, update the settings of your connection to your ISP's dial-up TCP/IP. To change or add a valid IP address for your DNS server for a dial-up Networking phonebook entry, follow these steps:a. in Control Panel, double-click network connections.
b. right click on your Internet connection, click Properties and then click the network tab.
c. click the Internet Protocol adapter, and then click Properties.
d. click use the following DNS server address, and then type the correct IP address in the preferred DNS server box.
e. click OK, and then click OK again.
If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
-
Can send & receive OK but if I click on any folder, IE, Inbox etc, I just see the first message that is completely open and displayed, not the list of messages for me to select a. It goes the same for files sent/deleted. To see others, the only way is to click on 'View', then select 'next '.
View | Page layout. Is the preview pane checked or not?
-
Help please my iPad crashing with lines to the bottom of the screen can only help me
Please help my iPad keeps crashing with lines running down the screen.
Restore factory settings: use iTunes to restore your device iOS to factory settings
If it does not help there is material damage
-
I have copy of CS5 on the old laptop and really need to do on my newer computer operating system windows, but the purchased disk was originally lost. Help please I have improved my cameras and they are not supported in CS3 and I don't want to bother with the DNG Converter. Looking at the details of loading originally in 2010 I have only 20 digits of the serial number that I need to finish loading on the new computer from 24.
I hope someone can help please
If your software is still running on your old machine, you can try to save it now. See if there is an Option in the Help menu. If it works, you don't need to know your serial number to get the software registered, but your number will subsequently indicate in your adobe account.
-
I installed vsphere4 with a host name and then wanted to change... I've updated the host file, / etc/network and even made a "newhostname hostname" but when I go back to look at the hosts file, it just goes back to the original host name. HA adds an entry to the host file, which makes me believe that it doesn't. I restart the network service, the server and it still goes back host name of the i put when I installed the server. Strangely, when I do the hostname command, I get the correct new host name. but I can only ping the server using the original host name because that is what is in the hosts file.
any one seen this before? any help would be greatly appreciated.
Raymond Golden
VCP3, VCP4, MCSA,Net, was DRY.
Change of name in vSphere client. All files will be updated automatically.
---
VCP MCSA, MCTS Hyper-V, VMware vExpert 2009, 3/4
-
design-the number of IP addresses per subnet determines the size of the pool
The number of IP addresses available for the subnet limits the number of workstations in the pool. For example, if your network is configured so that the subnet for the pool contains only 256 first IP addresses can be used, the size of the pool is limited to 256 desktops. With 5.2 view Horizon however, you can configure multiple network labels in order to greatly expand the number of IP addresses assigned to virtual machines in a pool.
I'm a little lost. Can someone explain please how available IP address in a subnet refers to a poop. When I create a pool at no time does all ask me for an IP address. After it starts up, it sends a broadcase, Hey, I need an IP, and if there are some available he will receive a. I guess what I'm getting is a dhcp server or multiple dhcp servers exist someone will answer if they have an avialalbe. Why an IP address in the same range no would cause not not to deploy a virtual computer.
WHT am so I'm missing.
This is a good text on the topic on the blog of Andrés:
http://myvirtualcloud.NET/?p=4730
Linjo
-
The user can see all the resources, not only allowed for access to its organization
Hello
I put three self-serviceable resources resources authorized for a specific organization. So if I click on resources authorized for this organization, I can see only these three...
When a user of this organization click on request for new resources, all self-serviceable resources are listed to the user, not only allowed resources. I thought that the user can only see authorized resources...
If I connect as sys admin and request resources for a user of that organization, I can see that the three resources allowed.
I saw the sql statement that run of IOM to inventory resources:
Select
obj.obj_key, obj_name, obj.sdk_key, sdk_name, obj_order_for, obj_auto_prepop, obj_type,
obj_allow_multiple, obj_self_request_allowed, obj_autosave, obj_allowall,
obj_rowver, obj_note, obj_autolaunch
to obj obj
outer join Software Development Kit sdk left obj.sdk_key = sdk.sdk_key
where obj.obj_key in
(
Select distinct obj.obj_key from obj obj
outer join Software Development Kit sdk left obj.sdk_key = sdk.sdk_key
Left outer join acp acp on obj.obj_key = acp.obj_key
OBA oba on obj.obj_key = oba.obj_key left outer join
where
(
obj.obj_self_request_allowed = '1' or obj.obj_key in
(
Select obj_key in acp where act_key in
(
Select act_key
of the usr
where usr_key = 5 and acp_self_servicable = '1'
)
)
) and
obj.obj_order_for = 'U' and
(obj.obj_type ='Application ' or obj.obj_type ='Generic ') and
obj.obj_key not in
(
Select pop.obj_key
pop pop, pol pol, pog pog, PMU PMU, usg usg
where
pop.pol_key = pol.pol_key and
pol.pol_key = POG.pol_key and
POG.ugp_key = UGP.ugp_key and
UGP.ugp_key = USG.ugp_key and
USG.usr_key (5) and
pop.pop_denial = '1'
) and
obj.obj_key not in)
Select distinct obj.obj_key
to obj obj, obi obi, ost ost ouedraogo ouedraogo
Join external orc orc left on oiu.orc_key = orc.orc_key
where
OIU.obi_key = Obi.obi_key and
OIU.ost_key = OST.ost_key and
Upper (OST.ost_status) "REVOKED" <>and
OBI.obj_key = obj.obj_key and
OIU.usr_key (5) and
obj.obj_allow_multiple = '0'
) and
obj.obj_key in
(
Select distinct obj_key
pkg
where pkg_type = 'Configuration '.
)
)
As you can see in the query above, if I change the excerpt below the result is what I expect.
...
obj.obj_self_request_allowed = '1' AND obj.obj_key in
...
I missed to set something or something wrong?
Thank you
Renato.Sorry, but I do not understand your last answer. You mentioned the following:
for option B, even if option A is not checked, you can set automatic ask for organization when assign authorized resources.
-isn't that what you wanted? You define the resource resources as authorized in all organizations whose users can request this resource. I implemented this and it works fine. This works for both types of applications. (a) my resources-> request for new resources and b) applications-> resources-> Grant resources.
In the case of b, according to the Organization to which the user is selected, the resource is displayed. all resources are not displayed.
So the solution is to uncheck in RO and bring the resource authorized specific organizations as resources in self down. It should work fine. Let me know your exact problem if it works that way.
Maybe you are looking for
-
One day lost trying to 'open' iTunes on my laptop. For some reason, that it does not open when I double click on the icon? I have tried repairing, uninstall and then install. Ive tried clicking the shortcut and crossed the program click the icon... n
-
Satellite C650D does not supply power to the top just a beep
Hello I have a Toshiba laptop (C650D) PSC16A-006011When I press the Start button it omitts a (4 short beeps then 1 beep) short beep just after the last 1 that happens twice The screen remains black, the power light is green & the HDD led is green & s
-
have put in a new cartridge and the answer is error 5200 and no printing
-
Need advice on Windows server 2008 R2 Foundation
Hello Small business of less than 10 workstations. We have a server windows 2000, existing in the form of DC, it is about 10 years old, but works perfectly. We plan to do a Win Server 2008 R2 Foundation as a backup. Advice needed: 1. can you the R2 j
-
How to find the program with high Internet usage
Original title: I get a message that, due to a long term, my internet use program is too high. How can I find out what that this prog. is? With the help of paid AVG security. Vista Do not download movies or anything high usage. message appears everyt