In a software installation and driver for network WiFi C6150 printer

Re: HPE 170 t w/Windows Professional computer

I have difficulties to complete the final configuration after installing the software, after which I get a fatal error. This info is passed on you, and I got a message from one of your REPS that I try to install the wifi only. When I try to open the Solution Center, I get a window that says: the device not finished; Go to the technical support I did several times. He also says to plug in the USB cables, but this isn't the way I want to use this printer.

I have now done several complete installation/uninstallation process, and I closed my Norton program, including using the disk cleaner / delete the temp nothing helps.

I can get the printer to work, and the center of HP PhotoSmart works great. But the important centre of the Solution continues to be a problem, and I need a fix for this. What are your recommdations? Thank you

Of free will or by force, I solved this simpleton.

Here's what I made if according to Hoyle or not:

I clicked the downloaded all in one HP software. I removed selectively Solutions centre, although it said that it could create problems with other HP software. When the computer is off, I connected the USB cable from the printer to the computer. I started the computer. It seemed that the downloaded software went into an automatic mode when I pressed the button of installation software. So far, I had previously deselected the HP store and the OCR software. Well, it started to install all three against my will: the Solution centre, OCR and the HP store.  I wanted only the Solution Center. Heck!

And it has worked. Open Solution Center, and the Fax icon appeared. I ran across a few initial tests; and all seemed to do very well. However, he has worked with the USB cable. Now, the real test:

I turned off the computer. I removed the USB cable. I turned the computer back on. I opened the center of Solution, and it worked.  After spending almost my entire day on this machine. However, a small hitch. Before its opening, I'd get a small window that I had to say yes to so that the center of solutions to open it. This little window is controlled by user account control, and he did not want to allow the following: Hpqdirect.exe, Unknown Publisher, original file, HD on this computer. It was rather annoying, and I had to get rid of.

Here's what I did:

I opened the UAC. I pushed the lever down. I restarted the computer. I clicked on the solution Center, and the small window wasn't there. I disabled the Solution Center.  Then I went back to the UAC, I raised the lever where it was originally. I then open the Solution Center. Voila! The small pestilential wndow wasn't there.

I want to thank those who have responded to me. Even if I fish around and find a way to do this, I appreciated the help because he kept me on task.  Not only that, but I've learned to other procedures that may be useful to future challenges.

Tags: HP Printers

Similar Questions

  • Lost my software disk and driver for HP Officejet 8600 all in one

    I somehow misplaced the disk with my drivers and software for my new Hp Officejet 8600 all in one. I was about to download on the site but I don't know which one to get? Does only I the ng911a, the ng911g, the orng911n?  What is the difference in all three? I have no idea what to do.

    Thank you very much for your help!

    Hello

    The software installation package is the same for each of the models above - a quick link to download the full installer of features is below.

    http://ftp.HP.com/pub/softlib/software12/COL40120/bi-108858-3/OJ8600_1315.exe

    Best regards

    DP - K

  • Windows 7 operating system is not listed on software downloads and driver for HP G7000 notebook

    IM using HP G7000 notebook and my OS is vista. I want to install the windows operating system 7, but it is not listed on downlaods software & driver. is it compatible to use the driver from vista to windows7?

    Hello

    Yes you can.

    If you can connect to the internet first, launch the program from Windows Update in your programs menu. It will download and install the latest drivers for most of your hardware components.

    For anything else, you need, you can use the Vista drivers found on your laptop support page.

    You can also read this helpful upgrade guide if you wish.

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and/General-Windows-7-upgrade-guide-for-HP-laptops/TD-p/236034

    Paul

  • Software installation problem driver for HP Photosmart B110 on Windows 7 64 bit

    I recently acquired a series of HP Photosmart B110, I tried several times to connect to my PC. I tried to download your software but if only reach "applying updates" in the first section of the installation then appears at the stop. You can make suggestions as to what could be the problem?

    Hello

    Follow the insntallation again to agree licensing stage.

    Click on the link 2 - using the Internet connection settings and select No, thank you for the botht of listed options.

    Confirm the changes, accept the terms and continue the installation which should go further than the step now.

    Shlomi

  • Where can I get a driver for network controller

    trying to fix an Acer Travelmate with winXP sp3

    I don't know where to find the device driver for network controller. Driver details show only the PCI bus. Help, please

    Hello

    1. What is the exact model of your computer?

    I suggest you to download and install the drivers from the link below and check if it helps.

    http://support.Acer.com/us/en/default.aspx

    Hope this information is useful.

  • HP G62 234DX: driver for network controller

    Hello

    I need a driver for network controller. The laptop is a G62 234DX and under ID Network controller hardware is the following value: PCI\VEN_10EC & DEV_8171 & SUBSYS_1467103C & REV_10

    I wasn't able to find the right driver. Could you please tell me.

    Thank you

    Please click the watch link below to download and install the driver

    http://www.Realtek.com/downloads/downloadsView.aspx?langid=1&PNid=48&PFID=48&level=5&Conn=4&DownTypeID=3&GETDOWN=false&downloads=true#RTL8191SE-VA2

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on 'white Thumbs Up' on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you
    K N R K
    Although I am an employee of HP, I speak for myself and not for HP

  • HP 250 G3 laptop: driver for network controller

    Hello
    Can you help me find the driver for network controller?
    I could not found on the page of the HP drivers.
    Hardware ID here:
    PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00
    PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103
    PCI\VEN_1814 & DEV_3290 & CC_02800
    PCI\VEN_1814 & DEV_3290 & CC_028

    Thank you in advance.

    Wishes for the day scu92

    If please click the link below and try to install the drivers and let me know if this solves the problem.

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6732463&swItemId=ob_148570_1&swEnvOid=4063

    Concerning

    Fadi

    Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution.

    Click on the "congratulations, Thumbs Up" at the bottom right to say 'Thank you' for helping!

  • Cannot install the driver for network controller

    I have dell vostro laptop 2520 and I recently replced the HDD and installed win 7 ultimate 64-bit

    I have successfully installed all the strawberry drivers windows can't find a driver for network controller and I can not activate the wi - fi.
    all solutions?
    Thank you.

    Yes, go here and download the proper drivers.

    http://www.Dell.com/support/troubleshooting/us/en/04/product/Vostro-2520

  • I need a driver for network controller driver Inspiron 531

    I recently had a reason to reinstall the OS from scratch on a new HD.  However, I can't find a driver for network controller. or connector.  Accordingly, I have no internet.  As far as I know, it's on board and by nVIDIA nForce.

    Can someone point me in the right direction?


  • need driver for network controller

    I need driver for network controller for my hp probook 4530 s

    Hardware NETWORK CONTOLLER ID

    PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01

    PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C

    PCI\VEN_10EC & DEV_8176 & CC_028000

    PCI\VEN_10EC & DEV_8176 & CC_0280

    Hello:

    You need this driver...

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_105197_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  • Pavilion a1400n: Windows XP driver for a LaserJet 1200 printer attached to a Windows 7 computer

    Where can I find the driver Windows XP on a 32-bit PC wants to be able to add a printer connected to a PC running Windows 7 64 bit which are on my home network?

    I worked through the process of adding a printer to my Windows XP machine that I can get to the point in the Add Printer Wizard after the navigation of the printer and choose what I click Next and the response that I actually want add the printer that is on the Windows 7 PC. I am then presented with a dialog box indicating that the INF file is necessary. I downloaded the drivers that are on http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=58928 & swLangOid = 8 & swEnvOid = 4063 and tried each of them pointing to the directory where they are each. When I do that I said that "Windows cannot locate a suitable driver. Contact your administrator for help to locate and install a correct driver.

    Where can I find the suitable driver for PC Windows XP print to a printer connected to a Windows 7 PC on my network?

    I found a solution to this problem, but this isn't the ability to print a document from my XP computer to a shared printer connected to my Windows 7 computer. The solution I implemented was to connect my XP computer to the printer via a parallel cable. I went with this approach for two reasons.

    First of all, I realized that none of the drivers for this printer are available for Windows 7 64-bit allow me to print a document double sided or in a brochure (print booklet of course depends on the ability to print double-sided) from my Windows 7 computer. The dirver for this printer on my XP (32 bit) provides these capabilities. The 64-bit Windows 7 driver that Microsoft provides through Windows Update appears to support these capabilities, but when these options are selected, that the document prints single sided. Windows 7 64-bit universal printer driver for this printer that is available on the HP site is not yet expected to provide these features. It's as if HP abandoned for most of this printer. I understand that this is an old printer, but what I find amazing, it is that he was not so old a printer when Windows 7 64-bit was new, so why can't HP provide the latest version of the driver that could perform these functions? (Of course I can just be assuming that at some point it might). Surely it cannot take up that much space on their server. The other question is why the universal printer driver for Windows 7 64 bit cannot provide these capabilities? XP driver 32 bit I have, which is also a universal printer driver that I downloaded several years ago on the HP site, provides the capability. I have tried downloading a version of XP 32 - most recent bit of the driver to see if it was stripped of these capabilities.

    Second, I chose to use the parallel connection because my XP computer has a parallel port, I already had a parallel cable which was not used, and doing so allows me to have the printer connected permanently on both computers. Tempting to connect two computers using a cable USB would require to manually switch the USB of a computer connection to the other whenever I tried to print from the computer that was not connected.

  • How to install the driver for a Lexmark 730 printer?

    How can I install a driver for my Lexmark 730 printer

    Lexmark drivers:
    http://support.Lexmark.com/index?page=productSelection&linkSelected=Node0

    Download drivers

    Visit the manufacturer's Web site and select your model (this is usually done in the Support section). You should be able to download drivers for your model if they have drivers for your version of Windows. Download the driver and then follow the instructions to install.

  • Retired HP Pavilion a6000n PC and can not find the driver for Network Card card do? Download Driver?

    Gradient of the Visa OS came with the PC for XP.  Installed new HD and partitioned drive so there is no pass file.

    I found that it is management of network integrated 10/100 Base-T interface but cannot find the manufacturer to use it Web site.  In addition, been

    playback ChipSet might need drivers or upgrade?  Don't know that much about this, but enough to get in trouble if

    I'm not "coached" through it all.  Low grade was the Visa MS HP accompanying MS XP Professional.                               Need a link or help find the Driver for the network card.

    Thank you.

    Thank you very much... which seems to do the job for letting me use the network card.  Once I installed the chipset you me too, my IE was able to get the net.  The only thing that happened that I wonder about, what I choose to accept or not something RAID, which I accepted and it seems to work with one small annoying side affect: I can't get Windows Update to run.  I get this error: 0x8024400a and I spent literally hours looking for and trying different solutions, which none have worked. Do you think that there is something that would change this Nvidia software which would cause that?   I get out to the internet OK and can go to any web page.  It runs a bit slow, but I thought it might be because I'm using a newly installed Win XP and it has only 2 SP.  My next step in getting this thing to work was to run Windows Update and anti-virus stuff set.   Any way, thanks again for your help.

  • How to stop "Hard drives Autorun is allowed" and "Autorun for network drives is activated" messages

    I am running Windows 7 on my computer and I got a few messages warning of Kaspersky Security software:

    "Hard drives Autorun is allowed" and "network drives Autorun is enabled.

    How turn off the power?

    Thanks for your help in advance.

    MEJaggi

    Hello Jack,

    Thanks for posting your question on the Microsoft community.

    Thank you for your question details.

    This behavior can occur if the hard drive or network drive settings are not configured correctly.

    I suggest you disable the Autorun feature and check if that helps.

    Please see this link:
    How to disable the Autorun feature in Windows
    https://Support2.Microsoft.com/kb/967715

    Note: See sub-section "Let me fix it myself" under the section "How to disable or enable all .

    Features of AutoPlay in Windows 7 and other operating systems"in the article above.

    Important: problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    http://Windows.Microsoft.com/en-us/Windows/back-up-registry

    For reference:
    http://support.Kaspersky.com/avzscripts/TSW.AVZ.58
    http://support.Kaspersky.com/avzscripts/TSW.AVZ.59

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • New installation XP ThinkPad R61 - looking for Driver for network controller

    Hello

    My R61 came with Suse Linux and I have re-drive using a new version of XP. All software and drivers are installed but I stil have an exclamation mark in the Device Manager on the network controller. No matter what I do, I have re - install, drivers or when I search for an updated driver can't do the device to recognize a valid driver.

    Any ideas or is this a defect on the laptop?

    Usually when you install a device driver, the network controller is wireless network card.

    The Ethernet device is generally presented as Ethernet controller.

    Looking at your specs

    T8300(2.4GHz), 1 GB RAM, 160 GB 5400 RPM HD, 14.1 in. LCD 1440 x 900, 128 MB nVIDIA Quadro NVS 140 M, CD-RW/DVD-RW, Intel 802.11abg wireless, Bluetooth, Modem, 1 Gb Ethernet, UltraNav, chip secure, RPF, 6 c Li-ion, SUSE Linux Enterprise Desktop 10 SP1

    It seems that you have an intel WLAN card which should be here.

    Be sure to post the results. :-)

    If it doesn't not reolve trying to get a screenshot of the Device Manager, if you could.

Maybe you are looking for

  • How to turn off microsoft Narrator

    I want to turn off Microsoft Narrator.  How do we?

  • IS THERE A LIST OF THE DRIVERS THAT MATCH A FAILURE CODE? FOR EXAMPLE (0XDEEDFADE)

    IS THERE A LIST OF THE DRIVERS THAT MATCH A FAILURE CODE?  FOR EXAMPLE (0XDEEDFADE).  «I GET THIS WHEN I TRY TO CONNECT A RECORDER APPLICATION MY PC (WITH CODE SCREEN BLUE DEATH "DRIVER IRQL-NOT-DONOR-BASED EQUALITY).» [Moved from comments]

  • Reliable storage compromised

    I have tried to run media NTI Maker 9 and received the error message: Failure of the extraction of flexible License Manager: Reliable storage compromised; repair kits Function: MM9Acer FLEXnet license error; -157,424 Acer V5 571P Any suggestions Kind

  • Realtek AC 97 Audio Windows XP

    Hello! I want to know where I can download this program and there must be a free download. Let me know is as soon as possible.

  • E2 engine issue

    Dear Sir/Madam, I got four probes of Cisco IPS SSM-20. I'm running 6.0 (3) E1 and did not particularly want to spend 6.0 (4) due to the following: CSCsm60273 AIP - SSM rest in State does not respond after the start of ASA5500 I have a number of downs