In regard to the global inventory and local inventory

Similar Questions

• Why is the global username and password now mandatory for APs first unless you reset?

  Also done setting the AP global user name and the password on the controller cause a reboot?

  NO.

• New hard drive. can I copy the old emails and local files from the old hard drive

  I installed a larger hard drive in my laptop. I still have the old hdd. Both run on Windows 8. How can I copy all the information like e-mail, files, etc. the old hdd to the new HDD. It is in Thunderbird. Please can someone help me?

  Article has step by step instructions.
  
  Where are you stuck?

• Global and local index with respect to table partitioned

  Hello
  I am very confused about local and global index in a partitioned table.
  In addition, local index can be partitioned and unpartitioned.
  In addition, what is the difference between global partitioned and unpartitioned
  the index?
  
  As far as I know,
  If there is local index then there will be as many partitions as the partition table
  and local parition will index contains the index of only the lines of their corresponding scores.
  In addition, the local index maintananence is easier because drop us or create a partition, only index corresponding partition is affected then that in the case of the overall index,
  If we create a new partition of the table, to rebuild the global index.
  Am I wrong?
  
  Concerning

  Hello

  This means that when you add/drop/split/merge table any partition (maintaiance) lying below, its corresponding partition in index is automatically added/deleted/split/merged. Oracle takes care of it internally without user intervention.

  Concerning
  Anurag

• What are the networkservice and Local service folder in Windows XP

  Original title:networkservice.nt instants

  I had a few Win XP Pro SP3 which has 'documents and settings' folder with the name 'networkservice.nt instants' or 'localservice.nt instants.

  What is this folder used for and can I delete them?

  Hello

  The network service and local service record are system files that are hidden.

  The Network Service file is and hidden in Windows XP Documents and settings folder and it's a case of temporary storage for network services.

  For more information on the local service file click on the link below.

  http://msdn.Microsoft.com/en-us/library/ms684188

  Note:

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• Need help in the Ora inventory for patch rolup 5 Apache

  Hi all
  
  Versions:
  Oracle 11.5.10.2 application
  Database 10.2.0.3
  Application and database are in different servers
  We also have the configuration of the DMZ as external layer for application
  Apache version:
  Server version: Oracle HTTP Server Powered by Apache/1.3.19 (Unix)
  Built-in Server: April 5, 2004 16:17:45 (iAS 1.0.2.2.2 cumulative 4)
  
  
  We are applying the Update Rollup 5 for Apache, we do tests, out of production. Since the non-production are cloned from production, we have no inventory ora for non-production. But to apply this hotfix, set the inventory of the ora.
  
  That is a possibility to clone the ora production non-production inventory, if so can you please provide the steps.
  
  I've gone through the metalink: 295185.1, these steps can be done if we have individual stocks for all households. But we don't have that.
  
  Please advice.
  
  Thank you and best regards,
  Rakesh

  Rakesh,

  You do not need to clone your global inventory, it will be useless for the nodes of your target ORACLE_HOMEs.

  Note: 216664,1 - FAQ: cloning Oracle Applications Release 11i
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=216664.1

  The right way to recreate the world inventory is by following the steps described in the note referenced by you. For inventories, it is automatically copied from the source system to the system target in the copy the ORACLE_HOME himself. Thus, you should have it and you should be able to recreate the global inventory.

  Kind regards
  Hussein

• Impossible to find contacts and local mail after Windows 10 re - install

  I have upgraded to Windows 10. Due to the age of the PC, I chose to do a clean install, keeping all my data etc. I reinstalled Firefox without any problems - all bookmarks etc are here. I then installed Thunderbird. The address books and local e-mail were not imported nor find a tab drop-down that would allow me to do.

  You make it difficult when there is an add-on. (see Matt the link)

• confusion in the background process and Globaleventlistener

  Hello

  too confused in Backendprocess.

  Please check my code and then tell me how I can do this.

  I want to add bluetooth address in my tree UIApp MyScreen articles and I bluetooth address storage file and record store.

  but confuesd how do I call the showAdress() method after complition of search BlueTooth.

  public class MyUIApp  extends UiApplication{
  
      public static void main(String[] args) {
          if (args != null && args.length > 0 && args[0].equals("gui"))
          {
              AppBackend appb = new AppBackend();
              appb.enterEventDispatcher();
  
          }
          else
          {
              ApplicationManager appMang = ApplicationManager.getApplicationManager();
              if(appMang.inStartup())
                  return;
              MyUIApp app = new MyUIApp();
              UiApplication.getUiApplication().invokeLater(new Runnable() {
  
                  public void run() {
  
                      ApplicationManager.getApplicationManager().postGlobalEvent(AppConstants.DATA_CHANGED);
                  }
              });
  
              app.enterEventDispatcher();
          }
      }
  
      public void showAdress()
      {
          getting data from record store adding Tree which si on Main Screen.
      }
  }
  

  public class AppBackend extends Application implements GlobalEventListener {
  
      public Timer timer;
      public Vector remote_device;
      public Vector device_found;
  
      BTSearch btSearch;
  
      public AppBackend() {
  
          addGlobalEventListener(this);
          timer = null;
  
      }
  
      public void firststart() {
          btSearch = new BTSearch();
          btSearch.start();
      }
  
      class BTSearch extends Thread implementsDiscoveryListener
      {
  
          boolean stopThread = false;
  
          public void run() {
              startThread();
  
          }
  
          public void startThread() {
  
              timer = new Timer();
  
              timer.schedule(new TimerTask() {
  
                  public void run() {
  
                      startScanBluetoothDevices();
  
              }, 30000, 30000);
  
          }
  
          public void startScanBluetoothDevices() {
              try {
  
                  remote_device = new Vector();
                  device_found = new Vector();
  
                  discovery_agent = LocalDevice.getLocalDevice().getDiscoveryAgent();
                  discovery_agent.startInquiry(DiscoveryAgent.GIAC, this);
  
              } catch (Exception error) {
                  Dialog.alert(error.getMessage());
              }
          }
  
          public void deviceDiscovered(RemoteDevice btDevice, DeviceClass cod)
          {
              //
          }
  
          public void inquiryCompleted(int discType)
          {
              //
          }
  
      }
  
      public void eventOccurred(long arg0, int arg1, int arg2, Object arg3,
              Object arg4) {
  
          if (arg0 == AppConstants.DATA_CHANGED) {
  
              firststart();
  
          }
  
      }
  
  }
  

  I'm confuesd how do I call the method showAdrees() If you desire to process bluetooth backend made.

  Now I'm for names of Bluetooth and the storage in the RecordStore. but now the problem is how can I display on my main screen located in UIApplication.

  I am struggling to read this code, it seems not to be complete.

  Sorry, beginning with the obvious things, I assume you have another entry.  Usually one who has the 'gui' param starts the user interface, so I guess that BlueFreeBackround is the treatment of the user interface.  Seems a strange name?  But any.  We do not have this code, so can't review it.

  The other entrance is the one who starts the initial treatment.  In case you're MyUIApp.  But you have this:

  If (appMang.inStartup ())
  return;
  Also if this is executed at boot time, the treatment does nothing.  And you start an application that seems to be the associated user interface.  I'm confused.  And we have no code to the constructor for this class, so we can not comment on that either.  All we know is that this class sends a global event.  Now, if I'm wrong, I don't think you need to start an Application to send a global event.  It is enough to have one to receive a.

  And you have given us another class, but there is no indication how it is started.  Assuming that it is started, it will receive the global event and execute the firststart() method.  Confusingly, this method will start a Thread that starts a timer.  Why can't firststart() him and save a Thread and some confusion?

  OK, now we come to the TimerTask, which is launched every 30 seconds (seems too often to me, but maybe not).  This process begins the investigation.  And we arrive at the point of this thread.  InquiryCompleted, I think you want to call showAddress().

  It's actually easy, although I really don't like this approach:

  Instead of using

  postGlobalEvent (long guid);

  use

  postGlobalEvent (long guid, int data0, data1, object0 object, Object1 int);

  and pass the MyUIApp object as a parameter object0.  Then, you can call

  . showAddress();

  I suspect that this will throw IllegalStateException, so you'll need to hire a

  this.invokeLater (...)

  to ensure that you have the thread of events when refreshing.

  But if I were you, I would consider this approach.  It seems some unnecessary steps.  For example, why doesn't MyUiApp start the discovery itself, what s at the point of the AppBackend?  A; Otherwise, you use a global event to initiate treatment, you could send the data in another GlobalEvent.

• Why the GLOBAL styles are overriding the styles of my TABLET?

  I have worked with Dreamweaver since its inception, but it's my first delicate design. Using the latest version (Build Dreamweaver CC 13.2 6466) on Mac 10.7.5

  By recommendation, I started in Mobile display and built most of the site successfully. But problems with a fluid layout 2 columns in tablet mode. I have inserted some DIVs in Mobile display and their style. Then I click on the Tablet icon, select the same div, and it is not resized with the handle. I note that the media query does NOT change to ' only of the screen and (min-width: 481px) ' it is stuck on WITH the overall class selected. I thought that the appropriate @Media class was supposed to automatically select.

  If I select manually only screen and (min-width: 481px) and the correct class for this DIV, the definition of the width is well set to 49.1712%, but the word width has a bar. If I fly over the bar, I get this message ToolTip:

  "width does not apply to your selection because it has been replaced by the rule. MerchCol1 (in other words, it is overridden by the GLOBAL/Mobile style.

  I manually changed the Global classes and Tablet as shown below - but now the 49.1712% affects the Mobile DIV, although it is reported as 100%

  Here's the corresponding code only from my main style sheet of layout, with the appropriate classes in bold. I'd appreciate any help that I have a bad headache 8 hours trying to solve this supposedly easy way to create a sensitive site.

  / * Mobile layout: 480px and below. */

  {.gridContainer}

  left margin: auto;

  margin-right: auto;

  Width: 96.7391%;

  padding-left: 1.6304%;

  padding-right: 1.6304%;

  Clear: none;

  float: none;

  }

  . {MerchCol1}

  text-align: center;

  background-color: #D1E5EC;

  Width: 100%;

  }

  . {MerchCol2}

  text-align: center;

  background-color: #D1E5EC;

  Width: 100%;

  }

  {.zeroMargin_mobile}

  left margin: 0;

  }

  {.hide_mobile}

  display: none;

  }

  / * Tablet Layout: 481px to 768px. Inherits the styles of: Mobile layout. */

  @media only screen and (min-width: 481px) {}

  {.gridContainer}

  Width: 91.4836%;

  padding-left: 0.7581%;

  padding-right: 0.7581%;

  Clear: none;

  float: none;

  left margin: auto;

  }

  . {MerchCol1}

  text-align: center;

  background-color: #D1E5EC;

  Width: 49.1712%;

  }

  . {MerchCol2}

  text-align: center;

  background-color: #D1E5EC;

  Width: 49.1712%;

  }

  
  

  Add the size of the box to make it easier and add fleet to ensure that the columns sit next to each other, as in

  / * Mobile layout: 480px and below. */

  * {

  Box-sizing: Border-box

  }

  {.gridContainer}

  left margin: auto;

  margin-right: auto;

  Width: 96.7391%;

  padding-left: 1.6304%;

  padding-right: 1.6304%;

  Clear: none;

  float: none;

  }

  . {MerchCol1}

  text-align: center;

  background-color: #D1E5EC;

  Width: 100%;

  }

  . {MerchCol2}

  text-align: center;

  background-color: #D1E5EC;

  Width: 100%;

  }

  {.zeroMargin_mobile}

  left margin: 0;

  }

  {.hide_mobile}

  display: none;

  }

  / * Tablet Layout: 481px to 768px. Inherits the styles of: Mobile layout. */

  @media only screen and (min-width: 481px) {}

  {.gridContainer}

  Width: 91.4836%;

  padding-left: 0.7581%;

  padding-right: 0.7581%;

  Clear: none;

  float: none;

  left margin: auto;

  }

  . {MerchCol1}

  text-align: center;

  background-color: #D1E5EC;

  Width: 50%;

  float: left;

  }

  . {MerchCol2}

  text-align: center;

  background-color: #D1E5EC;

  Width: 50%;

  float: left;

  }

• global search and replace prices

  I have about 20 catalogs I want to keep available online, but I want to delete prices.  Can anyone think of a way to do it with the global search and replace?  I think that I would have to do each doc separately because I don't want to remove all catalogs online prices.

  Thank you!

  I'm no expert with Regular Expressions, but I think it will work, assuming that all of your prices are in this format: $39.95 or $45.00.

  Search the Source Code.

  Check 'use the regular Expression' in the search panel & replacement

  Find: \W\d\d.\d\d

  Replace:

  NOTE: Test on a single page before trying it on your whole site or a folder. In addition, make backups before you start, just in case it does not work to plan.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• Clarify and Local Tone mapping in PE7 like PSP X 2 & X 3

  Just played a friends PC with the PSP software, and as these two commands.

  Specify the X 2 and Local Tone mapping in X 3.

  But now I'm Home I don't see anything similar in PE7 unless he/they are called something else. Or if you can get the same result with all other orders?

  If you open the image in Camera Raw window - this can be either a Raw, Jpeg, Tif, Psd file - then you will see a slider clarity that gives the Local contrast control. This can be even as the control of PSP clarify but I don't have PSP since v8.

  There are a few other good controls in this window that are well worth playing with.

  Colin

• Control Panel is not on the list. Users and local groups does not appear in computer management.

  1. click on start, and then point to setting, control panel is not on the list.  When you try to get to the Panel of control via a link in Help and Support, had an error, "operation has been cancelled due to restrictions in effect on this computer.  Contact your system administrator. »

  2. local Users and Groups does not appear in computer management.

  There is only one profile on the PC, the OS is XP Home.  It seems lost his administrator privileges somehow my user profile.  Could you please suggest how to solve this problem?  Thanks in advance.

  Hi PJohnson,

  You can access the link below and follow the steps in the article to create a new user account and copy the data to the new account.

  http://support.Microsoft.com/kb/811151

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Download picture of URL link and store the Image in a Local folder in BB10 Webworks

  Hello

  I want to download the image of URL link and store the image in a local folder in Webworks BB10.
  But I did not get the code for this.

  If such knowledge code or have any solution then please help me...

  Thank you best regards &,.

  Laurent Subudhi

  NitishSubudhi wrote:
  I go through this code... but it is throwing the exception. That is to say "ReferenceError: Webworks is undefined '." "

  According to the device/operating system, you need to add the extension of your installation of WebWorks as explained here for OS SmartPhone BB or PlayBook OS.

  To use read the samples provided, they must work somehow. When I worked with the extension on PlayBook I only copy + pasted the provided source code and changed the attributes for the function call:

  // You need to define "remotePath", "localPath", "onProgress", "onError", "options" like shown in documentationblackberry.io.fileTransfer.downloadFile(remotePath, localPath, onProgress, onError, options);
  

  For OS SmartPhone BB the function call looks like this:

  // You need to define "options" like shown in documentationwebworks.io.FileDownloader.download(options);
  

  All think that all information provide here, try to follow and cela should operate.

• Two-way Navigation: side AND Top Navigation: Page header contained in the Global Page causes overlap of the following regions

  Environment:

  -------------------

  APEX 5.0.1 on ADR in Tomcat

  Universal theme

  Global page

  New application (no migration)

  The goal:

  -----------

  In addition to the navigation, I want to use a horizontal Navigation at the top of all application pages at the same time.

  My way up to now:

  ---------------------

  (1) left Navigation ist defined as default user interface.

  1A) Unfortunately it is not possible to have two means of navigation defined at the same time!

  (2) therefore... I created a global page

  (3) and added a list with the list of attribute (= Menu bar) template to the PAGE of a global Page header. -> Well, looks good, but:

  The problem and the Question:

  ------------------------------------

  When adding a list according to menu (or something else like static text) to the global header of the page then the left hand side Navigation AND Breadcrumb area is oberlapped by the 'Logo' and 'Navigation Bar area' because the Page header is pushing it down. Parts of the side Navigation and navigation bar are not more.

  Please see the 2 following screen captures:

  Initial position:

  

  After the addition of menu on the global page:

  

  Unfortunately I can't understand myself, how to set the position or the css page template, or values... and at what level (model, page,...) I have to put.

  = > y at - it a way to let these following regions (dynamically) be pushed down? How can we define the position?

  Best regards

  Joerg

  Hello out there!

  In case anyone has the same issue here the answer I would give for-> me I found the following solution:

  .) I defined a new style with the following custom css theme roller:

  .apex-side-nav .t-body-nav, nav-side-.apex .t-body-stocks, .apex-side-nav .t-body-title

  {

  top: 80px;

  }

  

  .) And then of course saved as a new style.

  Hope this is the right way and good / best practices to deal with it!

  Best regards!

  Joerg

• I am trying to perform a static check on the model. When I double click the model and go to the tab control... There is nothing to select in the knowledge module. I want to use CKM here... but nothing appearing in the drop-down menu. The global KMs are no

  I am trying to perform a static check on the model. When I double click the model and go to the tab control... There is nothing to select in the knowledge module. I want to use CKM here... but nothing appearing in the drop-down menu. The global not supposed to KMs the listed here?

  Hello

  You have imported the whole CKM in modules of knowledge?

  If not, import ckm and do it.

  Kind regards

  Gangareddy.k